Andrew Reed
Basic TFT display program for CITY082
Revision 1:402b32a1025f, committed 2019-11-19
- Comitter:
- reedas
- Date:
- Tue Nov 19 10:04:48 2019 +0000
- Parent:
- 0:6beb6f498640
- Commit message:
- Basic Hello World tft display library program
Changed in this revision
diff -r 6beb6f498640 -r 402b32a1025f TextLCD.cpp
--- a/TextLCD.cpp Mon Aug 09 14:17:02 2010 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,193 +0,0 @@
-/* mbed I2CTextLCD Library, for a 4-bit LCD driven by I2C and a PCF8574
- * Copyright (c) 2007-2010, sford, rcocking
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-/* This is a hack of Simon Ford's direct-driven TextLCD code.
-* It should be refactored to extract a common superclass
-* but my C++ isn't yet good enough :)
-*
-* The code assumes the following connections between the PCF8574
-* and the LCD
-*
-* nc - D0
-* nc - D1
-* nc - D2
-* nc - D3
-* P0 - D4
-* P1 - D5
-* P2 - D6
-* P3 - D7
-* P4 - E
-* P5 - nc
-* P6 - nc
-* P7 - RS
-* gnd - R/W
-*
-* D0-3 of the LCD are not connected because we work in 4-bit mode
-* R/W is hardwired to gound, as we only ever write to the LCD
-* A0-2 on the PCF8574 can be set in any combination; you will need to modify
-* the I2C address in the I2CTextLCD constructor.
-* Remember that the mbed uses 8-bit addresses, which should be
-* in the range 0x40-0x4E for the PCF8574
-*/
-#include "TextLCD.h"
-#include "mbed.h"
-
-TextLCD::TextLCD(PinName sda, PinName scl, int i2cAddress, LCDType type) : _i2c(sda, scl),
- _type(type) {
- _i2cAddress = i2cAddress;
- wait(0.015); // Wait 15ms to ensure powered up
-
- // send "Display Settings" 3 times (Only top nibble of 0x30 as we've got 4-bit bus)
- for (int i=0; i<3; i++) {
- writeByte(0x3, false);
- wait(0.00164); // this command takes 1.64ms, so wait for it
- }
- writeByte(0x2, false); // 4-bit mode
- wait(0.000040f); // most instructions take 40us
-
- writeCommand(0x28); // Function set 001 BW N F - -
- writeCommand(0x0C);
- writeCommand(0x6); // Cursor Direction and Display Shift : 0000 01 CD S (CD 0-left, 1-right S(hift) 0-no, 1-yes
- cls();
-}
-
-void TextLCD::character(int column, int row, int c) {
- int a = address(column, row);
- writeCommand(a);
- writeData(c);
-}
-
-void TextLCD::cls() {
- writeCommand(0x01); // cls, and set cursor to 0
- wait(0.00164f); // This command takes 1.64 ms
- locate(0, 0);
-}
-
-void TextLCD::locate(int column, int row) {
- _column = column;
- _row = row;
-}
-
-int TextLCD::_putc(int value) {
- if (value == '\n') {
- _column = 0;
- _row++;
- if (_row >= rows()) {
- _row = 0;
- }
- } else {
- character(_column, _row, value);
- _column++;
- if (_column >= columns()) {
- _column = 0;
- _row++;
- if (_row >= rows()) {
- _row = 0;
- }
- }
- }
- return value;
-}
-
-int TextLCD::_getc() {
- return -1;
-}
-
-void TextLCD::writeI2CByte(int data) {
- // equivalent to writeI2CByte
- char * cmd = new char[1];
- cmd[0] = data;
- _i2c.write(_i2cAddress, cmd, 1);
-}
-
-void TextLCD::writeNibble(int data, bool rs) {
- if (rs) {
- data = data | RS_ON; // set rs bit
- }
- data |= E_ON; // E on
- writeI2CByte(data);
- data ^= E_ON; // E off
- wait_us(1);
- writeI2CByte(data);
- wait_us(1000);
-}
-
-void TextLCD::writeByte(int data, bool rs) {
- writeNibble(data >> 4, rs);
- writeNibble(data & 0x0F, rs);
-}
-
-void TextLCD::writeCommand(int command) {
- // equivalent to ard commandWrite
- writeByte(command, false);
-}
-
-void TextLCD::writeData(int data) {
-
- writeByte(data, true);
-}
-
-int TextLCD::address(int column, int row) {
- switch (_type) {
- case LCD20x4:
- switch (row) {
- case 0:
- return 0x80 + column;
- case 1:
- return 0xc0 + column;
- case 2:
- return 0x94 + column;
- case 3:
- return 0xd4 + column;
- }
- case LCD16x2B:
- return 0x80 + (row * 40) + column;
- case LCD16x2:
- case LCD20x2:
- default:
- return 0x80 + (row * 0x40) + column;
- }
-}
-
-int TextLCD::columns() {
- switch (_type) {
- case LCD20x4:
- case LCD20x2:
- return 20;
- case LCD16x2:
- case LCD16x2B:
- default:
- return 16;
- }
-}
-
-int TextLCD::rows() {
- switch (_type) {
- case LCD20x4:
- return 4;
- case LCD16x2:
- case LCD16x2B:
- case LCD20x2:
- default:
- return 2;
- }
-}
diff -r 6beb6f498640 -r 402b32a1025f TextLCD.h
--- a/TextLCD.h Mon Aug 09 14:17:02 2010 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,117 +0,0 @@
-/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
- * Copyright (c) 2007-2010, sford
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef MBED_TEXTLCD_H
-#define MBED_TEXTLCD_H
-
-#include "mbed.h"
-
-#define E_ON 0x10
-#define RS_ON 0x80
-
-/** A TextLCD interface for driving 4-bit HD44780-based LCDs
- *
- * Currently supports 16x2, 20x2 and 20x4 panels
- *
- * @code
- * #include "mbed.h"
- * #include "TextLCD.h"
- *
- * TextLCD lcd(p10, p12, p15, p16, p29, p30); // rs, e, d0-d3
- *
- * int main() {
- * lcd.printf("Hello World!\n");
- * }
- * @endcode
- */
-class TextLCD : public Stream {
-public:
-
- /** LCD panel format */
- enum LCDType {
- LCD16x2 /**< 16x2 LCD panel (default) */
- , LCD16x2B /**< 16x2 LCD panel alternate addressing */
- , LCD20x2 /**< 20x2 LCD panel */
- , LCD20x4 /**< 20x4 LCD panel */
- };
-
- /** Create a TextLCD interface
- *
- * @param rs Instruction/data control line
- * @param e Enable line (clock)
- * @param d0-d3 Data lines
- * @param type Sets the panel size/addressing mode (default = LCD16x2)
- */
- TextLCD(PinName sda, PinName scl, int i2cAddress = 0x40, LCDType type = LCD16x2);
-
-#if DOXYGEN_ONLY
- /** Write a character to the LCD
- *
- * @param c The character to write to the display
- */
- int putc(int c);
-
- /** Write a formated string to the LCD
- *
- * @param format A printf-style format string, followed by the
- * variables to use in formating the string.
- */
- int printf(const char* format, ...);
-#endif
-
- /** Locate to a screen column and row
- *
- * @param column The horizontal position from the left, indexed from 0
- * @param row The vertical position from the top, indexed from 0
- */
- void locate(int column, int row);
-
- /** Clear the screen and locate to 0,0 */
- void cls();
-
- int rows();
- int columns();
-
-protected:
-
- // Stream implementation functions
- virtual int _putc(int value);
- virtual int _getc();
-
- int address(int column, int row);
- void character(int column, int row, int c);
- void writeByte(int value, bool rs);
- void writeCommand(int command);
- void writeData(int data);
- void writeNibble(int value, bool rs);
- void writeI2CByte(int data);
-
- LCDType _type;
- int _rs;
- I2C _i2c;
- int _i2cAddress;
-
- int _column;
- int _row;
-};
-
-#endif
diff -r 6beb6f498640 -r 402b32a1025f emwin_config/GUIConf.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/emwin_config/GUIConf.cpp Tue Nov 19 10:04:48 2019 +0000
@@ -0,0 +1,88 @@
+/*********************************************************************
+* SEGGER Microcontroller GmbH & Co. KG *
+* Solutions for real time microcontroller applications *
+**********************************************************************
+* *
+* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG *
+* *
+* Internet: www.segger.com Support: support@segger.com *
+* *
+**********************************************************************
+
+** emWin V5.46 - Graphical user interface for embedded applications **
+All Intellectual Property rights in the Software belongs to SEGGER.
+emWin is protected by international copyright laws. Knowledge of the
+source code may not be used to write a similar product. This file may
+only be used in accordance with the following terms:
+
+The software has been licensed to Cypress Semiconductor Corporation,
+whose registered office is situated at 198 Champion Ct. San Jose, CA
+95134 USA solely for the purposes of creating libraries for Cypress
+PSoC3 and PSoC5 processor-based devices, sublicensed and distributed
+under the terms and conditions of the Cypress End User License
+Agreement.
+Full source code is available at: www.segger.com
+
+We appreciate your understanding and fairness.
+----------------------------------------------------------------------
+Licensing information
+Licensor: SEGGER Microcontroller Systems LLC
+Licensed to: Cypress Semiconductor Corp, 198 Champion Ct., San Jose, CA 95134, USA
+Licensed SEGGER software: emWin
+License number: GUI-00319
+License model: Services and License Agreement, signed June 10th, 2009
+Licensed platform: Any Cypress platform (Initial targets are: PSoC3, PSoC5)
+----------------------------------------------------------------------
+Support and Update Agreement (SUA)
+SUA period: 2009-06-12 - 2022-07-27
+Contact to extend SUA: sales@segger.com
+----------------------------------------------------------------------
+File : GUIConf.c
+Purpose : Display controller initialization
+---------------------------END-OF-HEADER------------------------------
+*/
+
+#include "GUI.h"
+
+/*********************************************************************
+*
+* Defines
+*
+**********************************************************************
+*/
+//
+// Define the available number of bytes available for the GUI
+//
+#define GUI_NUMBYTES 0x8000
+
+/*********************************************************************
+*
+* Public code
+*
+**********************************************************************
+*/
+/*********************************************************************
+*
+* GUI_X_Config
+*
+* Purpose:
+* Called during the initialization process in order to set up the
+* available memory for the GUI.
+*/
+void GUI_X_Config(void) {
+ //
+ // 32 bit aligned memory area
+ //
+ static U32 aMemory[GUI_NUMBYTES / 4];
+ //
+ // Assign memory to emWin
+ //
+ GUI_ALLOC_AssignMemory(aMemory, GUI_NUMBYTES);
+ //
+ // Set default font
+ //
+ GUI_SetDefaultFont(GUI_FONT_6X8);
+}
+
+/*************************** End of file ****************************/
+
diff -r 6beb6f498640 -r 402b32a1025f emwin_config/GUI_X_Mbed.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/emwin_config/GUI_X_Mbed.cpp Tue Nov 19 10:04:48 2019 +0000
@@ -0,0 +1,158 @@
+/*********************************************************************
+* SEGGER Microcontroller GmbH *
+* Solutions for real time microcontroller applications *
+**********************************************************************
+* *
+* (c) 1996 - 2018 SEGGER Microcontroller GmbH *
+* *
+* Internet: www.segger.com Support: support@segger.com *
+* *
+**********************************************************************
+
+** emWin V5.48 - Graphical user interface for embedded applications **
+All Intellectual Property rights in the Software belongs to SEGGER.
+emWin is protected by international copyright laws. Knowledge of the
+source code may not be used to write a similar product. This file may
+only be used in accordance with the following terms:
+
+The software has been licensed to Cypress Semiconductor Corporation,
+whose registered office is situated at 198 Champion Ct. San Jose, CA
+95134 USA solely for the purposes of creating libraries for Cypress
+PSoC3 and PSoC5 processor-based devices, sublicensed and distributed
+under the terms and conditions of the Cypress End User License
+Agreement.
+Full source code is available at: www.segger.com
+
+We appreciate your understanding and fairness.
+----------------------------------------------------------------------
+Licensing information
+Licensor: SEGGER Microcontroller Systems LLC
+Licensed to: Cypress Semiconductor Corp, 198 Champion Ct., San Jose, CA 95134, USA
+Licensed SEGGER software: emWin
+License number: GUI-00319
+License model: Services and License Agreement, signed June 10th, 2009
+Licensed platform: Any Cypress platform (Initial targets are: PSoC3, PSoC5)
+----------------------------------------------------------------------
+Support and Update Agreement (SUA)
+SUA period: 2009-06-12 - 2022-07-27
+Contact to extend SUA: sales@segger.com
+----------------------------------------------------------------------
+File : GUI_X_Mbed.c
+Purpose : Config / System dependent externals for GUI
+---------------------------END-OF-HEADER------------------------------
+*/
+
+#include <stdio.h>
+#include "mbed.h"
+
+extern "C" {
+ #include "GUI.h"
+}
+
+/*********************************************************************
+*
+* Global data
+*/
+
+Ticker emwin_ticker;
+Mutex emwin_mutex;
+volatile GUI_TIMER_TIME timeMS = 0;
+
+/*********************************************************************
+*
+* Public code
+*
+**********************************************************************
+*/
+/*********************************************************************
+*
+* Timing:
+* GUI_X_GetTime()
+* GUI_X_Delay(int)
+
+ Some timing dependent routines require a GetTime
+ and delay function. Default time unit (tick), normally is
+ 1 ms.
+*/
+
+GUI_TIMER_TIME GUI_X_GetTime(void)
+{
+ return timeMS;
+}
+
+void GUI_X_Delay(int ms)
+{
+ wait_ms(ms);
+}
+
+/*********************************************************************
+*
+* GUI_X_ExecIdle()
+*
+*/
+void GUI_X_ExecIdle(void)
+{
+ wait_ms(1);
+}
+
+/*********************************************************************
+*
+* Multitasking:
+*
+* GUI_X_InitOS()
+* GUI_X_GetTaskId()
+* GUI_X_Lock()
+* GUI_X_Unlock()
+*
+* Note:
+* The following routines are required only if emWin is used in a
+* true multi task environment, which means you have more than one
+* thread using the emWin API.
+* In this case the
+* #define GUI_OS 1
+* needs to be in GUIConf.h
+*/
+void GUI_X_InitOS(void) {}
+void GUI_X_Unlock(void) { emwin_mutex.unlock(); }
+void GUI_X_Lock(void) { emwin_mutex.lock(); }
+U32 GUI_X_GetTaskId(void) { return 0; }
+
+/*********************************************************************
+*
+* Logging: OS dependent
+
+Note:
+ Logging is used in higher debug levels only. The typical target
+ build does not use logging and does therefor not require any of
+ the logging routines below. For a release build without logging
+ the routines below may be eliminated to save some space.
+ (If the linker is not function aware and eliminates unreferenced
+ functions automatically)
+
+*/
+
+void GUI_X_Log (const char *s) { GUI_USE_PARA(s); }
+void GUI_X_Warn (const char *s) { GUI_USE_PARA(s); }
+void GUI_X_ErrorOut(const char *s) { GUI_USE_PARA(s); }
+
+void ticker_handler(void)
+{
+ timeMS++;
+}
+
+/*********************************************************************
+*
+* GUI_X_Init()
+*
+* Note:
+* This routine is called from GUI_Init() in any case whether there
+* is an RTOS or not. You can use it for additional initializations
+* needed.
+*/
+
+void GUI_X_Init(void)
+{
+ emwin_ticker.attach(&ticker_handler, 0.001);
+}
+
+/*************************** End of file ****************************/
diff -r 6beb6f498640 -r 402b32a1025f emwin_config/LCDConf.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/emwin_config/LCDConf.cpp Tue Nov 19 10:04:48 2019 +0000
@@ -0,0 +1,299 @@
+/*********************************************************************
+* SEGGER Microcontroller GmbH & Co. KG *
+* Solutions for real time microcontroller applications *
+**********************************************************************
+* *
+* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG *
+* *
+* Internet: www.segger.com Support: support@segger.com *
+* *
+**********************************************************************
+
+** emWin V5.46 - Graphical user interface for embedded applications **
+All Intellectual Property rights in the Software belongs to SEGGER.
+emWin is protected by international copyright laws. Knowledge of the
+source code may not be used to write a similar product. This file may
+only be used in accordance with the following terms:
+
+The software has been licensed to Cypress Semiconductor Corporation,
+whose registered office is situated at 198 Champion Ct. San Jose, CA
+95134 USA solely for the purposes of creating libraries for Cypress
+PSoC3 and PSoC5 processor-based devices, sublicensed and distributed
+under the terms and conditions of the Cypress End User License
+Agreement.
+Full source code is available at: www.segger.com
+
+We appreciate your understanding and fairness.
+----------------------------------------------------------------------
+Licensing information
+Licensor: SEGGER Microcontroller Systems LLC
+Licensed to: Cypress Semiconductor Corp, 198 Champion Ct., San Jose, CA 95134, USA
+Licensed SEGGER software: emWin
+License number: GUI-00319
+License model: Services and License Agreement, signed June 10th, 2009
+Licensed platform: Any Cypress platform (Initial targets are: PSoC3, PSoC5)
+----------------------------------------------------------------------
+Support and Update Agreement (SUA)
+SUA period: 2009-06-12 - 2022-07-27
+Contact to extend SUA: sales@segger.com
+----------------------------------------------------------------------
+File : LCDConf.c
+Purpose : Display controller configuration (single layer)
+---------------------------END-OF-HEADER------------------------------
+*/
+
+#include "GUI.h"
+#include "GUIDRV_FlexColor.h"
+
+#include "cy8ckit_028_tft.h"
+
+
+/*********************************************************************
+*
+* Layer configuration (to be modified)
+*
+**********************************************************************
+*/
+//
+// Physical display size
+// The display size should be adapted in order to match the size of
+// the target display.
+//
+#define XSIZE_PHYS 240
+#define YSIZE_PHYS 320
+
+//
+// Color conversion
+// The color conversion functions should be selected according to
+// the color mode of the target display. Details can be found in
+// the chapter "Colors" in the emWin user manual.
+//
+#define COLOR_CONVERSION GUICC_M565
+
+//
+// Display driver
+//
+#define DISPLAY_DRIVER GUIDRV_FLEXCOLOR
+
+/*********************************************************************
+*
+* Configuration checking
+*
+**********************************************************************
+*/
+#ifndef VXSIZE_PHYS
+ #define VXSIZE_PHYS XSIZE_PHYS
+#endif
+#ifndef VYSIZE_PHYS
+ #define VYSIZE_PHYS YSIZE_PHYS
+#endif
+#ifndef XSIZE_PHYS
+ #error Physical X size of display is not defined!
+#endif
+#ifndef YSIZE_PHYS
+ #error Physical Y size of display is not defined!
+#endif
+#ifndef COLOR_CONVERSION
+ #error Color conversion not defined!
+#endif
+#ifndef DISPLAY_DRIVER
+ #error No display driver defined!
+#endif
+
+/********************************************************************
+*
+* CY8CKIT_028_TFT_InitController
+*
+* Purpose:
+* Initializes the LCD controller
+*
+*/
+static void CY8CKIT_028_TFT_InitController(void) {
+ /* Set up the display controller and put it into operation. If the
+ * display controller is not initialized by any external routine
+ * this needs to be adapted by the customer.
+ */
+ DisplayIntf_Init();
+
+/*
+ Cy_GPIO_Set(LCD_RESET_PORT, LCD_RESET_NUM);
+ GUI_Delay(20);
+ Cy_GPIO_Clr(LCD_RESET_PORT, LCD_RESET_NUM);
+ GUI_Delay(100);
+ Cy_GPIO_Set(LCD_RESET_PORT, LCD_RESET_NUM);
+ GUI_Delay(100);
+ */
+ LCD_RESET = 1u;
+ GUI_Delay(20);
+ LCD_RESET = 0u;
+ GUI_Delay(100);
+
+ LCD_RESET = 1u;
+ GUI_Delay(100);
+
+ DisplayIntf_Write8_A0(0x28);
+ DisplayIntf_Write8_A0(0x11); /* Exit Sleep mode */
+ GUI_Delay(100);
+ DisplayIntf_Write8_A0(0x36);
+ DisplayIntf_Write8_A1(0xA0); /* MADCTL: memory data access control */
+ DisplayIntf_Write8_A0(0x3A);
+ DisplayIntf_Write8_A1(0x65); /* COLMOD: Interface Pixel format */
+ DisplayIntf_Write8_A0(0xB2);
+ DisplayIntf_Write8_A1(0x0C);
+ DisplayIntf_Write8_A1(0x0C);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x33);
+ DisplayIntf_Write8_A1(0x33); /* PORCTRK: Porch setting */
+ DisplayIntf_Write8_A0(0xB7);
+ DisplayIntf_Write8_A1(0x35); /* GCTRL: Gate Control */
+ DisplayIntf_Write8_A0(0xBB);
+ DisplayIntf_Write8_A1(0x2B); /* VCOMS: VCOM setting */
+ DisplayIntf_Write8_A0(0xC0);
+ DisplayIntf_Write8_A1(0x2C); /* LCMCTRL: LCM Control */
+ DisplayIntf_Write8_A0(0xC2);
+ DisplayIntf_Write8_A1(0x01);
+ DisplayIntf_Write8_A1(0xFF); /* VDVVRHEN: VDV and VRH Command Enable */
+ DisplayIntf_Write8_A0(0xC3);
+ DisplayIntf_Write8_A1(0x11); /* VRHS: VRH Set */
+ DisplayIntf_Write8_A0(0xC4);
+ DisplayIntf_Write8_A1(0x20); /* VDVS: VDV Set */
+ DisplayIntf_Write8_A0(0xC6);
+ DisplayIntf_Write8_A1(0x0F); /* FRCTRL2: Frame Rate control in normal mode */
+ DisplayIntf_Write8_A0(0xD0);
+ DisplayIntf_Write8_A1(0xA4);
+ DisplayIntf_Write8_A1(0xA1); /* PWCTRL1: Power Control 1 */
+ DisplayIntf_Write8_A0(0xE0);
+ DisplayIntf_Write8_A1(0xD0);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x05);
+ DisplayIntf_Write8_A1(0x0E);
+ DisplayIntf_Write8_A1(0x15);
+ DisplayIntf_Write8_A1(0x0D);
+ DisplayIntf_Write8_A1(0x37);
+ DisplayIntf_Write8_A1(0x43);
+ DisplayIntf_Write8_A1(0x47);
+ DisplayIntf_Write8_A1(0x09);
+ DisplayIntf_Write8_A1(0x15);
+ DisplayIntf_Write8_A1(0x12);
+ DisplayIntf_Write8_A1(0x16);
+ DisplayIntf_Write8_A1(0x19); /* PVGAMCTRL: Positive Voltage Gamma control */
+ DisplayIntf_Write8_A0(0xE1);
+ DisplayIntf_Write8_A1(0xD0);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x05);
+ DisplayIntf_Write8_A1(0x0D);
+ DisplayIntf_Write8_A1(0x0C);
+ DisplayIntf_Write8_A1(0x06);
+ DisplayIntf_Write8_A1(0x2D);
+ DisplayIntf_Write8_A1(0x44);
+ DisplayIntf_Write8_A1(0x40);
+ DisplayIntf_Write8_A1(0x0E);
+ DisplayIntf_Write8_A1(0x1C);
+ DisplayIntf_Write8_A1(0x18);
+ DisplayIntf_Write8_A1(0x16);
+ DisplayIntf_Write8_A1(0x19); /* NVGAMCTRL: Negative Voltage Gamma control */
+ DisplayIntf_Write8_A0(0x2B);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0xEF); /* Y address set */
+ DisplayIntf_Write8_A0(0x2A);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x01);
+ DisplayIntf_Write8_A1(0x3F); /* X address set */
+ GUI_Delay(10);
+ DisplayIntf_Write8_A0(0x29);
+}
+
+/*********************************************************************
+*
+* Public code
+*
+**********************************************************************
+*/
+/*********************************************************************
+*
+* LCD_X_Config
+*
+* Function description
+* Called during the initialization process in order to set up the
+* display driver configuration.
+*/
+void LCD_X_Config(void) {
+ GUI_DEVICE * pDevice;
+ CONFIG_FLEXCOLOR Config = {0};
+ GUI_PORT_API PortAPI = {0};
+ //
+ // Set the display driver and color conversion
+ //
+ pDevice = GUI_DEVICE_CreateAndLink(DISPLAY_DRIVER, COLOR_CONVERSION, 0, 0);
+ //
+ // Display driver configuration
+ //
+ LCD_SetSizeEx (0, XSIZE_PHYS, YSIZE_PHYS);
+ LCD_SetVSizeEx (0, VXSIZE_PHYS, VYSIZE_PHYS);
+ //
+ // Orientation
+ //
+ Config.Orientation = GUI_MIRROR_Y | GUI_SWAP_XY;
+ GUIDRV_FlexColor_Config(pDevice, &Config);
+ //
+ // Set controller and operation mode
+ //
+ PortAPI.pfWrite8_A0 = DisplayIntf_Write8_A0;
+ PortAPI.pfWrite8_A1 = DisplayIntf_Write8_A1;
+ PortAPI.pfWriteM8_A1 = DisplayIntf_WriteM8_A1;
+ PortAPI.pfRead8_A1 = DisplayIntf_Read8_A1;
+ PortAPI.pfReadM8_A1 = DisplayIntf_ReadM8_A1;
+
+ GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66709, GUIDRV_FLEXCOLOR_M16C0B8);
+}
+
+/*********************************************************************
+*
+* LCD_X_DisplayDriver
+*
+* Purpose:
+* This function is called by the display driver for several purposes.
+* To support the according task, the routine needs to be adapted to
+* the display controller. Note that the commands marked
+* "optional" are not cogently required and should only be adapted if
+* the display controller supports these features.
+*
+* Parameter:
+* LayerIndex - Zero based layer index
+* Cmd - Command to be executed
+* pData - Pointer to a data structure.
+*
+* Return Value:
+* < -1 - Error
+* -1 - The command is not handled.
+* 0 - OK.
+*/
+int LCD_X_DisplayDriver(unsigned LayerIndex, unsigned Cmd, void * pData) {
+ int r;
+
+ GUI_USE_PARA(LayerIndex);
+ GUI_USE_PARA(pData);
+
+ switch (Cmd) {
+ case LCD_X_INITCONTROLLER: {
+ //
+ // Called during the initialization process in order to set up the
+ // display controller and put it into operation. If the display
+ // controller is not initialized by any external routine, this needs
+ // to be adapted by the customer...
+ //
+ // ...
+ CY8CKIT_028_TFT_InitController();
+ return 0;
+ }
+ default:
+ r = -1;
+ }
+ return r;
+}
+
+/*************************** End of file ****************************/
+
diff -r 6beb6f498640 -r 402b32a1025f emwin_config/LCDConf.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/emwin_config/LCDConf.h Tue Nov 19 10:04:48 2019 +0000 @@ -0,0 +1,51 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH & Co. KG * +* Solutions for real time microcontroller applications * +********************************************************************** +* * +* (c) 1996 - 2017 SEGGER Microcontroller GmbH & Co. KG * +* * +* Internet: www.segger.com Support: support@segger.com * +* * +********************************************************************** + +** emWin V5.46 - Graphical user interface for embedded applications ** +All Intellectual Property rights in the Software belongs to SEGGER. +emWin is protected by international copyright laws. Knowledge of the +source code may not be used to write a similar product. This file may +only be used in accordance with the following terms: + +The software has been licensed to Cypress Semiconductor Corporation, +whose registered office is situated at 198 Champion Ct. San Jose, CA +95134 USA solely for the purposes of creating libraries for Cypress +PSoC3 and PSoC5 processor-based devices, sublicensed and distributed +under the terms and conditions of the Cypress End User License +Agreement. +Full source code is available at: www.segger.com + +We appreciate your understanding and fairness. +---------------------------------------------------------------------- +Licensing information +Licensor: SEGGER Microcontroller Systems LLC +Licensed to: Cypress Semiconductor Corp, 198 Champion Ct., San Jose, CA 95134, USA +Licensed SEGGER software: emWin +License number: GUI-00319 +License model: Services and License Agreement, signed June 10th, 2009 +Licensed platform: Any Cypress platform (Initial targets are: PSoC3, PSoC5) +---------------------------------------------------------------------- +Support and Update Agreement (SUA) +SUA period: 2009-06-12 - 2022-07-27 +Contact to extend SUA: sales@segger.com +---------------------------------------------------------------------- +File : LCDConf.h +Purpose : Display driver configuration file +---------------------------------------------------------------------- +*/ + +#ifndef LCDCONF_H +#define LCDCONF_H + +#endif /* LCDCONF_H */ + +/*************************** End of file ****************************/ +
diff -r 6beb6f498640 -r 402b32a1025f main.cpp
--- a/main.cpp Mon Aug 09 14:17:02 2010 +0000
+++ b/main.cpp Tue Nov 19 10:04:48 2019 +0000
@@ -1,8 +1,37 @@
+/* Hello World! for the TextLCD Enhanced Library*/
+
#include "mbed.h"
-#include "TextLCD.h"
+#include "GUI.h"
+#include "cy8ckit_028_tft.h"
+
+void Display_Init(void)
+{
+
+ /* Set font size, foreground and background Colours */
+ GUI_SetFont(GUI_FONT_16B_1);
+ GUI_SetColor(GUI_WHITE);
+ GUI_SetBkColor(GUI_BLACK);
-TextLCD lcd(p9, p10);
+ /* Clear screen and print splash screen */
+ GUI_Clear();
+ GUI_SetTextAlign(GUI_TA_HCENTER);
+ GUI_DispStringAt("TFT Demo", 160, 20);
+}
+
+int main()
+{
+ /* Initialise EmWin driver*/
+ GUI_Init();
-int main() {
- lcd.printf("Hi mbed World!\n");
+ /* Initialise display */
+ Display_Init();
+
+
+ GUI_SetFont(GUI_FONT_8X16X2X2);
+ GUI_SetTextAlign(GUI_TA_HCENTER);
+ GUI_DispStringAt("Hello World!", 160, 200);
+
}
+
+
+
diff -r 6beb6f498640 -r 402b32a1025f mbed-os.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-os.lib Tue Nov 19 10:04:48 2019 +0000 @@ -0,0 +1,1 @@ +https://github.com/ARMmbed/mbed-os/#679d24833acf0a0b5b0d528576bb37c70863bc4e
diff -r 6beb6f498640 -r 402b32a1025f mbed.bld --- a/mbed.bld Mon Aug 09 14:17:02 2010 +0000 +++ b/mbed.bld Tue Nov 19 10:04:48 2019 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/9114680c05da +https://os.mbed.com/users/mbed_official/code/mbed/builds/65be27845400 \ No newline at end of file
diff -r 6beb6f498640 -r 402b32a1025f mbed_app.json
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json Tue Nov 19 10:04:48 2019 +0000
@@ -0,0 +1,16 @@
+{
+ "config": {
+ "SDA":"P6_1",
+ "SCL":"P6_0"
+ },"target_overrides": {
+ "*": {
+ "SDA" : "SDA",
+ "SCL" : "SCL",
+ "target.components_add": ["EMWIN_NOSNTS"],
+ "platform.stdio-convert-newlines": true,
+ "platform.stdio-baud-rate": 115200,
+ "platform.default-serial-baud-rate": 115200
+
+ }
+ }
+}
\ No newline at end of file
diff -r 6beb6f498640 -r 402b32a1025f middleware-emwin.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/middleware-emwin.lib Tue Nov 19 10:04:48 2019 +0000 @@ -0,0 +1,1 @@ +https://github.com/cypresssemiconductorco/middleware-emwin/#4f7b679659cb7696659d1a5bc084b1a5b3be6c70
diff -r 6beb6f498640 -r 402b32a1025f stats_report.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stats_report.h Tue Nov 19 10:04:48 2019 +0000
@@ -0,0 +1,132 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2018 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#ifndef STATS_REPORT_H
+#define STATS_REPORT
+
+#include "mbed.h"
+
+/**
+ * System Reporting library. Provides runtime information on device:
+ * - CPU sleep, idle, and wake times
+ * - Heap and stack usage
+ * - Thread information
+ * - Static system information
+ */
+class SystemReport {
+ mbed_stats_heap_t heap_stats;
+ mbed_stats_cpu_t cpu_stats;
+ mbed_stats_sys_t sys_stats;
+
+ mbed_stats_thread_t *thread_stats;
+ uint8_t thread_count;
+ uint8_t max_thread_count;
+ uint32_t sample_time_ms;
+
+public:
+ /**
+ * SystemReport - Sample rate in ms is required to handle the CPU percent awake logic
+ */
+ SystemReport(uint32_t sample_rate) : max_thread_count(8), sample_time_ms(sample_rate)
+ {
+ thread_stats = new mbed_stats_thread_t[max_thread_count];
+
+ // Collect the static system information
+ mbed_stats_sys_get(&sys_stats);
+
+ printf("=============================== SYSTEM INFO ================================\r\n");
+ printf("Mbed OS Version: %ld \r\n", sys_stats.os_version);
+ printf("CPU ID: 0x%lx \r\n", sys_stats.cpu_id);
+ printf("Compiler ID: %d \r\n", sys_stats.compiler_id);
+ printf("Compiler Version: %ld \r\n", sys_stats.compiler_version);
+
+ for (int i = 0; i < MBED_MAX_MEM_REGIONS; i++) {
+ if (sys_stats.ram_size[i] != 0) {
+ printf("RAM%d: Start 0x%lx Size: 0x%lx \r\n", i, sys_stats.ram_start[i], sys_stats.ram_size[i]);
+ }
+ }
+ for (int i = 0; i < MBED_MAX_MEM_REGIONS; i++) {
+ if (sys_stats.rom_size[i] != 0) {
+ printf("ROM%d: Start 0x%lx Size: 0x%lx \r\n", i, sys_stats.rom_start[i], sys_stats.rom_size[i]);
+ }
+ }
+ }
+
+ ~SystemReport(void)
+ {
+ free(thread_stats);
+ }
+
+ /**
+ * Report on each Mbed OS Platform stats API
+ */
+ void report_state(void)
+ {
+ report_cpu_stats();
+ report_heap_stats();
+ report_thread_stats();
+
+ // Clear next line to separate subsequent report logs
+ printf("\r\n");
+ }
+
+ /**
+ * Report CPU idle and awake time in terms of percentage
+ */
+ void report_cpu_stats(void)
+ {
+ static uint64_t prev_idle_time = 0;
+
+ printf("================= CPU STATS =================\r\n");
+
+ // Collect and print cpu stats
+ mbed_stats_cpu_get(&cpu_stats);
+
+ uint64_t diff = (cpu_stats.idle_time - prev_idle_time);
+ uint8_t idle = (diff * 100) / (sample_time_ms * 1000); // usec;
+ uint8_t usage = 100 - ((diff * 100) / (sample_time_ms * 1000)); // usec;;
+ prev_idle_time = cpu_stats.idle_time;
+
+ printf("Idle: %d%% Usage: %d%% \r\n", idle, usage);
+ }
+
+ /**
+ * Report current heap stats. Current heap refers to the current amount of
+ * allocated heap. Max heap refers to the highest amount of heap allocated
+ * since reset.
+ */
+ void report_heap_stats(void)
+ {
+ printf("================ HEAP STATS =================\r\n");
+
+ // Collect and print heap stats
+ mbed_stats_heap_get(&heap_stats);
+
+ printf("Current heap: %lu\r\n", heap_stats.current_size);
+ printf("Max heap size: %lu\r\n", heap_stats.max_size);
+ }
+
+ /**
+ * Report active thread stats
+ */
+ void report_thread_stats(void)
+ {
+ printf("================ THREAD STATS ===============\r\n");
+
+ // Collect and print running thread stats
+ int count = mbed_stats_thread_get_each(thread_stats, max_thread_count);
+
+ for (int i = 0; i < count; i++) {
+ printf("ID: 0x%lx \r\n", thread_stats[i].id);
+ printf("Name: %s \r\n", thread_stats[i].name);
+ printf("State: %ld \r\n", thread_stats[i].state);
+ printf("Priority: %ld \r\n", thread_stats[i].priority);
+ printf("Stack Size: %ld \r\n", thread_stats[i].stack_size);
+ printf("Stack Space: %ld \r\n", thread_stats[i].stack_space);
+ }
+ }
+};
+
+#endif // STATS_REPORT_H
diff -r 6beb6f498640 -r 402b32a1025f tft_interface/cy8ckit_028_tft.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/tft_interface/cy8ckit_028_tft.cpp Tue Nov 19 10:04:48 2019 +0000
@@ -0,0 +1,398 @@
+/***************************************************************************//**
+* \file DisplayInterface.h
+* \version 1.0
+*
+* \brief
+* Objective:
+* This is display software i8080 interface source file
+*
+********************************************************************************
+* \copyright
+* Copyright 2018-2019 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+* http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+
+#include "cy8ckit_028_tft.h"
+#include <mbed_wait_api.h>
+#include "mbed.h"
+#include "PortInOut.h"
+
+
+DigitalInOut LCD_REG0(P9_0);
+DigitalInOut LCD_REG1(P9_1);
+DigitalInOut LCD_REG2(P9_2);
+DigitalInOut LCD_REG3(P9_4);
+DigitalInOut LCD_REG4(P9_5);
+DigitalInOut LCD_REG5(P0_2);
+DigitalInOut LCD_REG6(P13_0);
+DigitalInOut LCD_REG7(P13_1);
+PortInOut P0(Port0, 0x04);
+PortInOut P9(Port9, 0x37);
+PortInOut P13(Port13, 0x03);
+
+DigitalOut LCD_NWR(P12_0);
+DigitalOut LCD_DC(P12_1);
+DigitalOut LCD_RESET(P12_2);
+DigitalOut LCD_NRD(P12_3);
+
+/*******************************************************************************
+* Function Name: DataWrite
+****************************************************************************/
+/**
+*
+* \brief
+* Writes one byte of data to the software i8080 interface.
+*
+* \details
+* This function:
+* - Writes data to the data bus
+* - Sends low pulse to the LCD_NWR line to write data
+*
+* Changed from individual bit banging to port masked writes to
+* P9[5,4,2,1,0], P13[1,0], P0[2] to optimise slightly
+*
+* \todo
+* All this should be replaced with a udb register to save all the shifting
+* and individual bit writing.
+*
+*******************************************************************************/
+void DataWrite(U8 data)
+{
+// LCD_REG0 = (data & 0x01);
+// LCD_REG1 = ((data>>1) & 0x01);
+// LCD_REG2 = ((data>>2) & 0x01);
+// LCD_REG3 = ((data>>3) & 0x01);
+// LCD_REG4 = ((data>>4) & 0x01);
+
+/* read the appropriate port and only change the bits we need to then write the
+ * affected bits back to the port retaining any unaffected bit values
+ */
+ int pbyte = P9.read();
+ int bit012 = (data & 0x07);
+ int bit34 = (data & 0x18) << 1;
+ pbyte = (pbyte & 0xc8) | bit34 | bit012;
+ P9.write(pbyte);
+// LCD_REG5 = ((data>>5) & 0x01);
+ pbyte = P0.read();
+ int bit5 = (data & 0x20) >> 3 ;
+ pbyte = (pbyte & 0xfb) | bit5 ;
+ P0.write(pbyte);
+
+// LCD_REG6 = ((data>>6) & 0x01);
+// LCD_REG7 = ((data>>7) & 0x01);
+ pbyte = P13.read();
+ int bit67 = (data & 0xc0) >> 6 ;
+ pbyte = (pbyte & 0xfc) | bit67 ;
+ P13.write(pbyte);
+ LCD_NWR = 0u;
+ LCD_NWR = 1u;
+
+}
+
+
+/*******************************************************************************
+* Function Name: DataRead
+****************************************************************************//**
+*
+* \brief
+* Reads one byte of data from the software i8080 interface.
+*
+* \details
+* This function:
+* - Changes data bus GPIO pins drive mode to digital Hi-Z with enabled input
+* buffer
+* - Sends low pulse to LCD_NRD line to read data
+* - Reads data from the data bus
+* - Sends low pulse to the LCD_NWR line to write data
+* - Changes data bus GPIO pins drive mode back to to Strong Drive mode
+*
+* \todo
+* All this should be replaced with a udb register to save all the shifting
+* and individual bit reading.
+*
+*******************************************************************************/
+U8 DataRead(void)
+{
+ U8 data = 0u;
+
+ /* enable input */
+ LCD_REG0.input();
+ LCD_REG1.input();
+ LCD_REG2.input();
+ LCD_REG3.input();
+ LCD_REG4.input();
+ LCD_REG5.input();
+ LCD_REG6.input();
+ LCD_REG7.input();
+
+ LCD_NRD = 0u; // Pulse read line low then read the data port
+
+ data = (U8)LCD_REG0.read();
+ data |= (U8)LCD_REG1.read()<<1;
+ data |= (U8)LCD_REG2.read()<<2;
+ data |= (U8)LCD_REG3.read()<<3;
+ data |= (U8)LCD_REG4.read()<<4;
+ data |= (U8)LCD_REG5.read()<<5;
+ data |= (U8)LCD_REG6.read()<<6;
+ data |= (U8)LCD_REG7.read()<<7;
+
+ LCD_NRD = 1u; // Raise the read line and then go back to output port
+
+ LCD_REG0.output();
+ LCD_REG1.output();
+ LCD_REG2.output();
+ LCD_REG3.output();
+ LCD_REG4.output();
+ LCD_REG5.output();
+ LCD_REG6.output();
+ LCD_REG7.output();
+
+ return data;
+}
+
+
+/*******************************************************************************
+* Function Name: DisplayIntf_Init
+****************************************************************************//**
+*
+* \brief
+* Initializes software i8080 interface.
+*
+* \details
+* This function:
+* - Initializes interface GPIO pins
+*
+*******************************************************************************/
+void DisplayIntf_Init(void)
+{
+ /* All pins are initialized by the Device Configurator. */
+ LCD_RESET = 1u;
+ LCD_NRD = 1u;
+ LCD_NWR = 1u;
+ LCD_DC = 0u;
+ LCD_REG0.output();
+ LCD_REG1.output();
+ LCD_REG2.output();
+ LCD_REG3.output();
+ LCD_REG4.output();
+ LCD_REG5.output();
+ LCD_REG6.output();
+ LCD_REG7.output();
+ wait_ms(20);
+ LCD_RESET = 0u;
+ wait_ms(100);
+
+ LCD_RESET = 1u;
+ wait_ms(100);
+
+ DisplayIntf_Write8_A0(0x28);
+ DisplayIntf_Write8_A0(0x11); /* Exit Sleep mode */
+ wait_ms(100);
+ DisplayIntf_Write8_A0(0x36);
+ DisplayIntf_Write8_A1(0xA0); /* MADCTL: memory data access control */
+ DisplayIntf_Write8_A0(0x3A);
+ DisplayIntf_Write8_A1(0x65); /* COLMOD: Interface Pixel format */
+ DisplayIntf_Write8_A0(0xB2);
+ DisplayIntf_Write8_A1(0x0C);
+ DisplayIntf_Write8_A1(0x0C);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x33);
+ DisplayIntf_Write8_A1(0x33); /* PORCTRK: Porch setting */
+ DisplayIntf_Write8_A0(0xB7);
+ DisplayIntf_Write8_A1(0x35); /* GCTRL: Gate Control */
+ DisplayIntf_Write8_A0(0xBB);
+ DisplayIntf_Write8_A1(0x2B); /* VCOMS: VCOM setting */
+ DisplayIntf_Write8_A0(0xC0);
+ DisplayIntf_Write8_A1(0x2C); /* LCMCTRL: LCM Control */
+ DisplayIntf_Write8_A0(0xC2);
+ DisplayIntf_Write8_A1(0x01);
+ DisplayIntf_Write8_A1(0xFF); /* VDVVRHEN: VDV and VRH Command Enable */
+ DisplayIntf_Write8_A0(0xC3);
+ DisplayIntf_Write8_A1(0x11); /* VRHS: VRH Set */
+ DisplayIntf_Write8_A0(0xC4);
+ DisplayIntf_Write8_A1(0x20); /* VDVS: VDV Set */
+ DisplayIntf_Write8_A0(0xC6);
+ DisplayIntf_Write8_A1(0x0F); /* FRCTRL2: Frame Rate control in normal mode */
+ DisplayIntf_Write8_A0(0xD0);
+ DisplayIntf_Write8_A1(0xA4);
+ DisplayIntf_Write8_A1(0xA1); /* PWCTRL1: Power Control 1 */
+ DisplayIntf_Write8_A0(0xE0);
+ DisplayIntf_Write8_A1(0xD0);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x05);
+ DisplayIntf_Write8_A1(0x0E);
+ DisplayIntf_Write8_A1(0x15);
+ DisplayIntf_Write8_A1(0x0D);
+ DisplayIntf_Write8_A1(0x37);
+ DisplayIntf_Write8_A1(0x43);
+ DisplayIntf_Write8_A1(0x47);
+ DisplayIntf_Write8_A1(0x09);
+ DisplayIntf_Write8_A1(0x15);
+ DisplayIntf_Write8_A1(0x12);
+ DisplayIntf_Write8_A1(0x16);
+ DisplayIntf_Write8_A1(0x19); /* PVGAMCTRL: Positive Voltage Gamma control */
+ DisplayIntf_Write8_A0(0xE1);
+ DisplayIntf_Write8_A1(0xD0);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x05);
+ DisplayIntf_Write8_A1(0x0D);
+ DisplayIntf_Write8_A1(0x0C);
+ DisplayIntf_Write8_A1(0x06);
+ DisplayIntf_Write8_A1(0x2D);
+ DisplayIntf_Write8_A1(0x44);
+ DisplayIntf_Write8_A1(0x40);
+ DisplayIntf_Write8_A1(0x0E);
+ DisplayIntf_Write8_A1(0x1C);
+ DisplayIntf_Write8_A1(0x18);
+ DisplayIntf_Write8_A1(0x16);
+ DisplayIntf_Write8_A1(0x19); /* NVGAMCTRL: Negative Voltage Gamma control */
+ DisplayIntf_Write8_A0(0x2B);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0xEF); /* Y address set */
+ DisplayIntf_Write8_A0(0x2A);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x00);
+ DisplayIntf_Write8_A1(0x01);
+ DisplayIntf_Write8_A1(0x3F); /* X address set */
+ wait_ms(10);
+ DisplayIntf_Write8_A0(0x29);
+
+
+}
+
+
+/*******************************************************************************
+* Function Name: DisplayIntf_Write8_A0
+****************************************************************************//**
+*
+* \brief
+* Writes one byte of data to the software i8080 interface with the LCD_DC pin
+* set to 0
+*
+* \details
+* This function:
+* - Sets LCD_DC pin to 0
+* - Writes one data byte
+*
+*******************************************************************************/
+void DisplayIntf_Write8_A0(U8 data)
+{
+ LCD_DC = 0u;
+ DataWrite(data);
+}
+
+
+/*******************************************************************************
+* Function Name: DisplayIntf_Write8_A1
+****************************************************************************//**
+*
+* \brief
+* Writes one byte of data to the software i8080 interface with the LCD_DC pin
+* set to 1
+*
+* \details
+* This function:
+* - Sets LCD_DC pin to 1
+* - Writes one data byte
+*
+*******************************************************************************/
+void DisplayIntf_Write8_A1(U8 data)
+{
+ LCD_DC = 1u;
+ DataWrite(data);
+}
+
+
+/*******************************************************************************
+* Function Name: DisplayIntf_WriteM8_A1
+****************************************************************************//**
+*
+* \brief
+* Writes multiple bytes of data to the software i8080 interface with the LCD_DC
+* pin set to 1
+*
+* \details
+* This function:
+* - Sets LCD_DC pin to 1
+* - Writes data bytes
+*
+*******************************************************************************/
+void DisplayIntf_WriteM8_A1(U8 data[], int num)
+{
+ int i = 0;
+
+ LCD_DC = 1u;
+
+ for(i = 0; i < num; i++)
+ {
+ DataWrite(data[i]);
+ }
+}
+
+
+/*******************************************************************************
+* Function Name: DisplayIntf_Read8_A1
+****************************************************************************//**
+*
+* \brief
+* Reads one byte of data from the software i8080 interface with the LCD_DC pin
+* set to 1
+*
+* \details
+* This function:
+* - Sets LCD_DC pin to 1
+* - Reads one data byte
+*
+*******************************************************************************/
+U8 DisplayIntf_Read8_A1(void)
+{
+ LCD_DC = 1u;
+ return DataRead();
+}
+
+
+/*******************************************************************************
+* Function Name: DisplayIntf_ReadM8_A1
+****************************************************************************//**
+*
+* \brief
+* Reads multiple bytes of data from the software i8080 interface with the LCD_DC
+* pin set to 1
+*
+* \details
+* This function:
+* - Sets LCD_DC pin to 1
+* - Reads data bytes
+*
+*******************************************************************************/
+void DisplayIntf_ReadM8_A1(U8 data[], int num)
+{
+ int i = 0;
+
+ LCD_DC = 1u;
+
+ for(i = 0; i < num; i++)
+ {
+ data[i] = DataRead();
+ }
+}
+
+
+/* [] END OF FILE */
+
+
diff -r 6beb6f498640 -r 402b32a1025f tft_interface/cy8ckit_028_tft.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/tft_interface/cy8ckit_028_tft.h Tue Nov 19 10:04:48 2019 +0000 @@ -0,0 +1,93 @@ +/***************************************************************************//** +* \file DisplayInterface.h +* \version 1.0 +* +* \brief +* Objective: +* This is display software i8080 interface header file. +* +******************************************************************************** +* \copyright +* Copyright 2018-2019 Cypress Semiconductor Corporation +* SPDX-License-Identifier: Apache-2.0 +* +* Licensed under the Apache License, Version 2.0 (the "License"); +* you may not use this file except in compliance with the License. +* You may obtain a copy of the License at +* +* http://www.apache.org/licenses/LICENSE-2.0 +* +* Unless required by applicable law or agreed to in writing, software +* distributed under the License is distributed on an "AS IS" BASIS, +* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +* See the License for the specific language governing permissions and +* limitations under the License. +*******************************************************************************/ +/*#include "mbed.h" +#ifndef LCD_REG0 +DigitalInOut LCD_REG0(P9_0); +DigitalInOut LCD_REG1(P9_1); +DigitalInOut LCD_REG2(P9_2); +DigitalInOut LCD_REG3(P9_4); +DigitalInOut LCD_REG4(P9_5); +DigitalInOut LCD_REG5(P0_2); +DigitalInOut LCD_REG6(P13_0); +DigitalInOut LCD_REG7(P13_1); + +DigitalOut LCD_NWR(P12_0); +DigitalOut LCD_DC(P12_1); +DigitalOut LCD_RESET(P12_2); +DigitalOut LCD_NRD(P12_3); +#endif +*/ +#include <DigitalInOut.h> +#include <DigitalOut.h> + +extern mbed::DigitalInOut LCD_REG0; +extern mbed::DigitalInOut LCD_REG1; +extern mbed::DigitalInOut LCD_REG2; +extern mbed::DigitalInOut LCD_REG3; +extern mbed::DigitalInOut LCD_REG4; +extern mbed::DigitalInOut LCD_REG5; +extern mbed::DigitalInOut LCD_REG6; +extern mbed::DigitalInOut LCD_REG7; + + +extern mbed::DigitalOut LCD_NWR; +extern mbed::DigitalOut LCD_DC; +extern mbed::DigitalOut LCD_RESET; +extern mbed::DigitalOut LCD_NRD; + +#ifndef DISPLAYINTERFACE_H +#define DISPLAYINTERFACE_H + + +#include "GUI_Type.h" +//#include "cycfg_pins.h" + /* "LCD_DATA_0": "P9_0", + "LCD_DATA_1": "P9_1", + "LCD_DATA_2": "P9_2", + "LCD_DATA_3": "P9_4", + "LCD_DATA_4": "P9_5", + "LCD_DATA_5": "P0_2", + "LCD_DATA_6": "P13_0", + "LCD_DATA_7": "P13_1", + "LCD_NWR": "P12_0", + "LCD_DC": "P12_1", + "LCD_RESET": "P12_2", + "LDC_NRD": "P12_3", + */ + + +void DisplayIntf_Init(void); +void DisplayIntf_Write8_A0(U8 data); +void DisplayIntf_Write8_A1(U8 data); +void DisplayIntf_WriteM8_A1(U8 data[], int num); +U8 DisplayIntf_Read8_A1(void); +void DisplayIntf_ReadM8_A1(U8 data[], int num); + +#endif + +/* [] END OF FILE */ + +