Diff: targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L073RZ/PeripheralPins.c

Revision:

181:57724642e740

Parent:

169:e3b6fe271b81

Child:

186:707f6e361f3e

--- a/targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L073RZ/PeripheralPins.c	Wed Jan 17 15:23:54 2018 +0000
+++ b/targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L073RZ/PeripheralPins.c	Fri Feb 16 16:09:33 2018 +0000
@@ -29,6 +29,7 @@
  */
 
 #include "PeripheralPins.h"
+#include "mbed_toolchain.h"
 
 // =====
 // Note: Commented lines are alternative possibilities which are not used per default.
@@ -38,7 +39,7 @@
 
 //*** ADC ***
 
-const PinMap PinMap_ADC[] = {
+MBED_WEAK const PinMap PinMap_ADC[] = {
     {PA_0, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
     {PA_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
     {PA_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
@@ -58,7 +59,7 @@
     {NC,   NC,    0}
 };
 
-const PinMap PinMap_ADC_Internal[] = {
+MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
     {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // See in analogin_api.c the correct ADC channel used
     {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // See in analogin_api.c the correct ADC channel used
     {ADC_VLCD, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // See in analogin_api.c the correct ADC channel used
@@ -67,7 +68,7 @@
 
 //*** DAC ***
 
-const PinMap PinMap_DAC[] = {
+MBED_WEAK const PinMap PinMap_DAC[] = {
     {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
     {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
     {NC,   NC,    0}
@@ -75,7 +76,7 @@
 
 //*** I2C ***
 
-const PinMap PinMap_I2C_SDA[] = {
+MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
     {PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
     {PB_4,  I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)},
     {PB_7,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
@@ -87,7 +88,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_I2C_SCL[] = {
+MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
     {PA_8,  I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF7_I2C3)},
     {PA_9,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
     {PB_6,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
@@ -101,7 +102,7 @@
 //*** PWM ***
 
 // TIM21 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
+MBED_WEAK const PinMap PinMap_PWM[] = {
     {PA_0,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)},  // TIM2_CH1
     {PA_1,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)},  // TIM2_CH2
 //  {PA_2,  PWM_21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
@@ -136,7 +137,7 @@
 
 //*** SERIAL ***
 
-const PinMap PinMap_UART_TX[] = {
+MBED_WEAK const PinMap PinMap_UART_TX[] = {
     {PA_0,  UART_4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)},
     {PA_2,  UART_2,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
 //  {PA_2,  LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
@@ -155,7 +156,7 @@
     {NC,    NC,       0}
 };
 
-const PinMap PinMap_UART_RX[] = {
+MBED_WEAK const PinMap PinMap_UART_RX[] = {
     {PA_1,  UART_4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_USART4)},
     {PA_3,  UART_2,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
 //  {PA_3,  LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_LPUART1)},
@@ -174,7 +175,7 @@
     {NC,    NC,      0}
 };
 
-const PinMap PinMap_UART_RTS[] = {
+MBED_WEAK const PinMap PinMap_UART_RTS[] = {
     {PA_1,  UART_2,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
     {PB_1,  LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
     {PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)},
@@ -187,7 +188,7 @@
     {NC,    NC,       0}
 };
 
-const PinMap PinMap_UART_CTS[] = {
+MBED_WEAK const PinMap PinMap_UART_CTS[] = {
     {PA_0,  UART_2,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
     {PA_6,  LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
     {PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
@@ -199,7 +200,7 @@
 
 //*** SPI ***
 
-const PinMap PinMap_SPI_MOSI[] = {
+MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
     {PA_7,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PB_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
@@ -208,7 +209,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_SPI_MISO[] = {
+MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
     {PA_6,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PB_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
@@ -217,7 +218,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_SPI_SCLK[] = {
+MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
     {PA_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PB_3,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
@@ -225,7 +226,7 @@
     {NC,    NC,    0}
 };
 
-const PinMap PinMap_SPI_SSEL[] = {
+MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
     {PA_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
     {PB_9,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},