Diff: targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F469xI/TARGET_DISCO_F469NI/system_clock.c

Revision:

187:0387e8f68319

Parent:

182:a56a73fd2a6f

Child:

189:f392fc9709a3

--- a/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F469xI/TARGET_DISCO_F469NI/system_clock.c	Fri Jun 22 16:45:37 2018 +0100
+++ b/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F469xI/TARGET_DISCO_F469NI/system_clock.c	Thu Sep 06 13:40:20 2018 +0100
@@ -30,7 +30,7 @@
 **/
 
 #include "stm32f4xx.h"
-#include "mbed_assert.h"
+#include "mbed_error.h"
 
 
 /*!< Uncomment the following line if you need to relocate your vector Table in
@@ -68,7 +68,7 @@
 {
     /* FPU settings ------------------------------------------------------------*/
 #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
-    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+    SCB->CPACR |= ((3UL << 10 * 2) | (3UL << 11 * 2)); /* set CP10 and CP11 Full Access */
 #endif
     /* Reset the RCC clock configuration to the default reset state ------------*/
     /* Set HSION bit */
@@ -129,8 +129,8 @@
             if (SetSysClock_PLL_HSI() == 0)
 #endif
             {
-                while(1) {
-                    MBED_ASSERT(1);
+                {
+                    error("SetSysClock failed\n");
                 }
             }
         }
@@ -202,10 +202,11 @@
 
     // Output clock on MCO1 pin(PA8) for debugging purpose
 #if DEBUG_MCO == 1
-    if (bypass == 0)
-        HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz with xtal
-    else
-        HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz with external clock (MCO)
+    if (bypass == 0) {
+        HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2);    // 4 MHz with xtal
+    } else {
+        HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1);    // 8 MHz with external clock (MCO)
+    }
 #endif
 
     return 1; // OK