Marco Zecchini
/
Example_RTOS
Rtos API example
Embed:
(wiki syntax)
Show/hide line numbers
x509_crt.h
Go to the documentation of this file.
00001 /** 00002 * \file x509_crt.h 00003 * 00004 * \brief X.509 certificate parsing and writing 00005 * 00006 * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved 00007 * SPDX-License-Identifier: Apache-2.0 00008 * 00009 * Licensed under the Apache License, Version 2.0 (the "License"); you may 00010 * not use this file except in compliance with the License. 00011 * You may obtain a copy of the License at 00012 * 00013 * http://www.apache.org/licenses/LICENSE-2.0 00014 * 00015 * Unless required by applicable law or agreed to in writing, software 00016 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 00017 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 00018 * See the License for the specific language governing permissions and 00019 * limitations under the License. 00020 * 00021 * This file is part of mbed TLS (https://tls.mbed.org) 00022 */ 00023 #ifndef MBEDTLS_X509_CRT_H 00024 #define MBEDTLS_X509_CRT_H 00025 00026 #if !defined(MBEDTLS_CONFIG_FILE) 00027 #include "config.h" 00028 #else 00029 #include MBEDTLS_CONFIG_FILE 00030 #endif 00031 00032 #include "x509.h" 00033 #include "x509_crl.h" 00034 00035 /** 00036 * \addtogroup x509_module 00037 * \{ 00038 */ 00039 00040 #ifdef __cplusplus 00041 extern "C" { 00042 #endif 00043 00044 /** 00045 * \name Structures and functions for parsing and writing X.509 certificates 00046 * \{ 00047 */ 00048 00049 /** 00050 * Container for an X.509 certificate. The certificate may be chained. 00051 */ 00052 typedef struct mbedtls_x509_crt 00053 { 00054 mbedtls_x509_buf raw; /**< The raw certificate data (DER). */ 00055 mbedtls_x509_buf tbs; /**< The raw certificate body (DER). The part that is To Be Signed. */ 00056 00057 int version; /**< The X.509 version. (1=v1, 2=v2, 3=v3) */ 00058 mbedtls_x509_buf serial; /**< Unique id for certificate issued by a specific CA. */ 00059 mbedtls_x509_buf sig_oid; /**< Signature algorithm, e.g. sha1RSA */ 00060 00061 mbedtls_x509_buf issuer_raw; /**< The raw issuer data (DER). Used for quick comparison. */ 00062 mbedtls_x509_buf subject_raw; /**< The raw subject data (DER). Used for quick comparison. */ 00063 00064 mbedtls_x509_name issuer; /**< The parsed issuer data (named information object). */ 00065 mbedtls_x509_name subject; /**< The parsed subject data (named information object). */ 00066 00067 mbedtls_x509_time valid_from; /**< Start time of certificate validity. */ 00068 mbedtls_x509_time valid_to; /**< End time of certificate validity. */ 00069 00070 mbedtls_pk_context pk; /**< Container for the public key context. */ 00071 00072 mbedtls_x509_buf issuer_id; /**< Optional X.509 v2/v3 issuer unique identifier. */ 00073 mbedtls_x509_buf subject_id; /**< Optional X.509 v2/v3 subject unique identifier. */ 00074 mbedtls_x509_buf v3_ext; /**< Optional X.509 v3 extensions. */ 00075 mbedtls_x509_sequence subject_alt_names; /**< Optional list of Subject Alternative Names (Only dNSName supported). */ 00076 00077 int ext_types; /**< Bit string containing detected and parsed extensions */ 00078 int ca_istrue; /**< Optional Basic Constraint extension value: 1 if this certificate belongs to a CA, 0 otherwise. */ 00079 int max_pathlen; /**< Optional Basic Constraint extension value: The maximum path length to the root certificate. Path length is 1 higher than RFC 5280 'meaning', so 1+ */ 00080 00081 unsigned int key_usage; /**< Optional key usage extension value: See the values in x509.h */ 00082 00083 mbedtls_x509_sequence ext_key_usage; /**< Optional list of extended key usage OIDs. */ 00084 00085 unsigned char ns_cert_type; /**< Optional Netscape certificate type extension value: See the values in x509.h */ 00086 00087 mbedtls_x509_buf sig; /**< Signature: hash of the tbs part signed with the private key. */ 00088 mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */ 00089 mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */ 00090 void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */ 00091 00092 struct mbedtls_x509_crt *next; /**< Next certificate in the CA-chain. */ 00093 } 00094 mbedtls_x509_crt; 00095 00096 /** 00097 * Build flag from an algorithm/curve identifier (pk, md, ecp) 00098 * Since 0 is always XXX_NONE, ignore it. 00099 */ 00100 #define MBEDTLS_X509_ID_FLAG( id ) ( 1 << ( id - 1 ) ) 00101 00102 /** 00103 * Security profile for certificate verification. 00104 * 00105 * All lists are bitfields, built by ORing flags from MBEDTLS_X509_ID_FLAG(). 00106 */ 00107 typedef struct 00108 { 00109 uint32_t allowed_mds; /**< MDs for signatures */ 00110 uint32_t allowed_pks; /**< PK algs for signatures */ 00111 uint32_t allowed_curves; /**< Elliptic curves for ECDSA */ 00112 uint32_t rsa_min_bitlen; /**< Minimum size for RSA keys */ 00113 } 00114 mbedtls_x509_crt_profile; 00115 00116 #define MBEDTLS_X509_CRT_VERSION_1 0 00117 #define MBEDTLS_X509_CRT_VERSION_2 1 00118 #define MBEDTLS_X509_CRT_VERSION_3 2 00119 00120 #define MBEDTLS_X509_RFC5280_MAX_SERIAL_LEN 32 00121 #define MBEDTLS_X509_RFC5280_UTC_TIME_LEN 15 00122 00123 #if !defined( MBEDTLS_X509_MAX_FILE_PATH_LEN ) 00124 #define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 00125 #endif 00126 00127 /** 00128 * Container for writing a certificate (CRT) 00129 */ 00130 typedef struct mbedtls_x509write_cert 00131 { 00132 int version; 00133 mbedtls_mpi serial; 00134 mbedtls_pk_context *subject_key; 00135 mbedtls_pk_context *issuer_key; 00136 mbedtls_asn1_named_data *subject; 00137 mbedtls_asn1_named_data *issuer; 00138 mbedtls_md_type_t md_alg; 00139 char not_before[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1]; 00140 char not_after[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1]; 00141 mbedtls_asn1_named_data *extensions; 00142 } 00143 mbedtls_x509write_cert; 00144 00145 #if defined(MBEDTLS_X509_CRT_PARSE_C) 00146 /** 00147 * Default security profile. Should provide a good balance between security 00148 * and compatibility with current deployments. 00149 */ 00150 extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_default; 00151 00152 /** 00153 * Expected next default profile. Recommended for new deployments. 00154 * Currently targets a 128-bit security level, except for RSA-2048. 00155 */ 00156 extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_next; 00157 00158 /** 00159 * NSA Suite B profile. 00160 */ 00161 extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_suiteb; 00162 00163 /** 00164 * \brief Parse a single DER formatted certificate and add it 00165 * to the chained list. 00166 * 00167 * \param chain points to the start of the chain 00168 * \param buf buffer holding the certificate DER data 00169 * \param buflen size of the buffer 00170 * 00171 * \return 0 if successful, or a specific X509 or PEM error code 00172 */ 00173 int mbedtls_x509_crt_parse_der( mbedtls_x509_crt *chain, const unsigned char *buf, 00174 size_t buflen ); 00175 00176 /** 00177 * \brief Parse one or more certificates and add them 00178 * to the chained list. Parses permissively. If some 00179 * certificates can be parsed, the result is the number 00180 * of failed certificates it encountered. If none complete 00181 * correctly, the first error is returned. 00182 * 00183 * \param chain points to the start of the chain 00184 * \param buf buffer holding the certificate data in PEM or DER format 00185 * \param buflen size of the buffer 00186 * (including the terminating null byte for PEM data) 00187 * 00188 * \return 0 if all certificates parsed successfully, a positive number 00189 * if partly successful or a specific X509 or PEM error code 00190 */ 00191 int mbedtls_x509_crt_parse( mbedtls_x509_crt *chain, const unsigned char *buf, size_t buflen ); 00192 00193 #if defined(MBEDTLS_FS_IO) 00194 /** 00195 * \brief Load one or more certificates and add them 00196 * to the chained list. Parses permissively. If some 00197 * certificates can be parsed, the result is the number 00198 * of failed certificates it encountered. If none complete 00199 * correctly, the first error is returned. 00200 * 00201 * \param chain points to the start of the chain 00202 * \param path filename to read the certificates from 00203 * 00204 * \return 0 if all certificates parsed successfully, a positive number 00205 * if partly successful or a specific X509 or PEM error code 00206 */ 00207 int mbedtls_x509_crt_parse_file( mbedtls_x509_crt *chain, const char *path ); 00208 00209 /** 00210 * \brief Load one or more certificate files from a path and add them 00211 * to the chained list. Parses permissively. If some 00212 * certificates can be parsed, the result is the number 00213 * of failed certificates it encountered. If none complete 00214 * correctly, the first error is returned. 00215 * 00216 * \param chain points to the start of the chain 00217 * \param path directory / folder to read the certificate files from 00218 * 00219 * \return 0 if all certificates parsed successfully, a positive number 00220 * if partly successful or a specific X509 or PEM error code 00221 */ 00222 int mbedtls_x509_crt_parse_path( mbedtls_x509_crt *chain, const char *path ); 00223 #endif /* MBEDTLS_FS_IO */ 00224 00225 /** 00226 * \brief Returns an informational string about the 00227 * certificate. 00228 * 00229 * \param buf Buffer to write to 00230 * \param size Maximum size of buffer 00231 * \param prefix A line prefix 00232 * \param crt The X509 certificate to represent 00233 * 00234 * \return The length of the string written (not including the 00235 * terminated nul byte), or a negative error code. 00236 */ 00237 int mbedtls_x509_crt_info( char *buf, size_t size, const char *prefix, 00238 const mbedtls_x509_crt *crt ); 00239 00240 /** 00241 * \brief Returns an informational string about the 00242 * verification status of a certificate. 00243 * 00244 * \param buf Buffer to write to 00245 * \param size Maximum size of buffer 00246 * \param prefix A line prefix 00247 * \param flags Verification flags created by mbedtls_x509_crt_verify() 00248 * 00249 * \return The length of the string written (not including the 00250 * terminated nul byte), or a negative error code. 00251 */ 00252 int mbedtls_x509_crt_verify_info( char *buf, size_t size, const char *prefix, 00253 uint32_t flags ); 00254 00255 /** 00256 * \brief Verify the certificate signature 00257 * 00258 * The verify callback is a user-supplied callback that 00259 * can clear / modify / add flags for a certificate. If set, 00260 * the verification callback is called for each 00261 * certificate in the chain (from the trust-ca down to the 00262 * presented crt). The parameters for the callback are: 00263 * (void *parameter, mbedtls_x509_crt *crt, int certificate_depth, 00264 * int *flags). With the flags representing current flags for 00265 * that specific certificate and the certificate depth from 00266 * the bottom (Peer cert depth = 0). 00267 * 00268 * All flags left after returning from the callback 00269 * are also returned to the application. The function should 00270 * return 0 for anything (including invalid certificates) 00271 * other than fatal error, as a non-zero return code 00272 * immediately aborts the verification process. For fatal 00273 * errors, a specific error code should be used (different 00274 * from MBEDTLS_ERR_X509_CERT_VERIFY_FAILED which should not 00275 * be returned at this point), or MBEDTLS_ERR_X509_FATAL_ERROR 00276 * can be used if no better code is available. 00277 * 00278 * \note In case verification failed, the results can be displayed 00279 * using \c mbedtls_x509_crt_verify_info() 00280 * 00281 * \note Same as \c mbedtls_x509_crt_verify_with_profile() with the 00282 * default security profile. 00283 * 00284 * \note It is your responsibility to provide up-to-date CRLs for 00285 * all trusted CAs. If no CRL is provided for the CA that was 00286 * used to sign the certificate, CRL verification is skipped 00287 * silently, that is *without* setting any flag. 00288 * 00289 * \param crt a certificate (chain) to be verified 00290 * \param trust_ca the list of trusted CAs 00291 * \param ca_crl the list of CRLs for trusted CAs (see note above) 00292 * \param cn expected Common Name (can be set to 00293 * NULL if the CN must not be verified) 00294 * \param flags result of the verification 00295 * \param f_vrfy verification function 00296 * \param p_vrfy verification parameter 00297 * 00298 * \return 0 (and flags set to 0) if the chain was verified and valid, 00299 * MBEDTLS_ERR_X509_CERT_VERIFY_FAILED if the chain was verified 00300 * but found to be invalid, in which case *flags will have one 00301 * or more MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX 00302 * flags set, or another error (and flags set to 0xffffffff) 00303 * in case of a fatal error encountered during the 00304 * verification process. 00305 */ 00306 int mbedtls_x509_crt_verify( mbedtls_x509_crt *crt, 00307 mbedtls_x509_crt *trust_ca, 00308 mbedtls_x509_crl *ca_crl, 00309 const char *cn, uint32_t *flags, 00310 int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), 00311 void *p_vrfy ); 00312 00313 /** 00314 * \brief Verify the certificate signature according to profile 00315 * 00316 * \note Same as \c mbedtls_x509_crt_verify(), but with explicit 00317 * security profile. 00318 * 00319 * \note The restrictions on keys (RSA minimum size, allowed curves 00320 * for ECDSA) apply to all certificates: trusted root, 00321 * intermediate CAs if any, and end entity certificate. 00322 * 00323 * \param crt a certificate (chain) to be verified 00324 * \param trust_ca the list of trusted CAs 00325 * \param ca_crl the list of CRLs for trusted CAs 00326 * \param profile security profile for verification 00327 * \param cn expected Common Name (can be set to 00328 * NULL if the CN must not be verified) 00329 * \param flags result of the verification 00330 * \param f_vrfy verification function 00331 * \param p_vrfy verification parameter 00332 * 00333 * \return 0 if successful or MBEDTLS_ERR_X509_CERT_VERIFY_FAILED 00334 * in which case *flags will have one or more 00335 * MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX flags 00336 * set, 00337 * or another error in case of a fatal error encountered 00338 * during the verification process. 00339 */ 00340 int mbedtls_x509_crt_verify_with_profile( mbedtls_x509_crt *crt, 00341 mbedtls_x509_crt *trust_ca, 00342 mbedtls_x509_crl *ca_crl, 00343 const mbedtls_x509_crt_profile *profile, 00344 const char *cn, uint32_t *flags, 00345 int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), 00346 void *p_vrfy ); 00347 00348 #if defined(MBEDTLS_X509_CHECK_KEY_USAGE) 00349 /** 00350 * \brief Check usage of certificate against keyUsage extension. 00351 * 00352 * \param crt Leaf certificate used. 00353 * \param usage Intended usage(s) (eg MBEDTLS_X509_KU_KEY_ENCIPHERMENT 00354 * before using the certificate to perform an RSA key 00355 * exchange). 00356 * 00357 * \note Except for decipherOnly and encipherOnly, a bit set in the 00358 * usage argument means this bit MUST be set in the 00359 * certificate. For decipherOnly and encipherOnly, it means 00360 * that bit MAY be set. 00361 * 00362 * \return 0 is these uses of the certificate are allowed, 00363 * MBEDTLS_ERR_X509_BAD_INPUT_DATA if the keyUsage extension 00364 * is present but does not match the usage argument. 00365 * 00366 * \note You should only call this function on leaf certificates, on 00367 * (intermediate) CAs the keyUsage extension is automatically 00368 * checked by \c mbedtls_x509_crt_verify(). 00369 */ 00370 int mbedtls_x509_crt_check_key_usage( const mbedtls_x509_crt *crt, 00371 unsigned int usage ); 00372 #endif /* MBEDTLS_X509_CHECK_KEY_USAGE) */ 00373 00374 #if defined(MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE) 00375 /** 00376 * \brief Check usage of certificate against extentedJeyUsage. 00377 * 00378 * \param crt Leaf certificate used. 00379 * \param usage_oid Intended usage (eg MBEDTLS_OID_SERVER_AUTH or MBEDTLS_OID_CLIENT_AUTH). 00380 * \param usage_len Length of usage_oid (eg given by MBEDTLS_OID_SIZE()). 00381 * 00382 * \return 0 if this use of the certificate is allowed, 00383 * MBEDTLS_ERR_X509_BAD_INPUT_DATA if not. 00384 * 00385 * \note Usually only makes sense on leaf certificates. 00386 */ 00387 int mbedtls_x509_crt_check_extended_key_usage( const mbedtls_x509_crt *crt, 00388 const char *usage_oid, 00389 size_t usage_len ); 00390 #endif /* MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE) */ 00391 00392 #if defined(MBEDTLS_X509_CRL_PARSE_C) 00393 /** 00394 * \brief Verify the certificate revocation status 00395 * 00396 * \param crt a certificate to be verified 00397 * \param crl the CRL to verify against 00398 * 00399 * \return 1 if the certificate is revoked, 0 otherwise 00400 * 00401 */ 00402 int mbedtls_x509_crt_is_revoked( const mbedtls_x509_crt *crt, const mbedtls_x509_crl *crl ); 00403 #endif /* MBEDTLS_X509_CRL_PARSE_C */ 00404 00405 /** 00406 * \brief Initialize a certificate (chain) 00407 * 00408 * \param crt Certificate chain to initialize 00409 */ 00410 void mbedtls_x509_crt_init( mbedtls_x509_crt *crt ); 00411 00412 /** 00413 * \brief Unallocate all certificate data 00414 * 00415 * \param crt Certificate chain to free 00416 */ 00417 void mbedtls_x509_crt_free( mbedtls_x509_crt *crt ); 00418 #endif /* MBEDTLS_X509_CRT_PARSE_C */ 00419 00420 /* \} name */ 00421 /* \} addtogroup x509_module */ 00422 00423 #if defined(MBEDTLS_X509_CRT_WRITE_C) 00424 /** 00425 * \brief Initialize a CRT writing context 00426 * 00427 * \param ctx CRT context to initialize 00428 */ 00429 void mbedtls_x509write_crt_init( mbedtls_x509write_cert *ctx ); 00430 00431 /** 00432 * \brief Set the verion for a Certificate 00433 * Default: MBEDTLS_X509_CRT_VERSION_3 00434 * 00435 * \param ctx CRT context to use 00436 * \param version version to set (MBEDTLS_X509_CRT_VERSION_1, MBEDTLS_X509_CRT_VERSION_2 or 00437 * MBEDTLS_X509_CRT_VERSION_3) 00438 */ 00439 void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx, int version ); 00440 00441 /** 00442 * \brief Set the serial number for a Certificate. 00443 * 00444 * \param ctx CRT context to use 00445 * \param serial serial number to set 00446 * 00447 * \return 0 if successful 00448 */ 00449 int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx, const mbedtls_mpi *serial ); 00450 00451 /** 00452 * \brief Set the validity period for a Certificate 00453 * Timestamps should be in string format for UTC timezone 00454 * i.e. "YYYYMMDDhhmmss" 00455 * e.g. "20131231235959" for December 31st 2013 00456 * at 23:59:59 00457 * 00458 * \param ctx CRT context to use 00459 * \param not_before not_before timestamp 00460 * \param not_after not_after timestamp 00461 * 00462 * \return 0 if timestamp was parsed successfully, or 00463 * a specific error code 00464 */ 00465 int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx, const char *not_before, 00466 const char *not_after ); 00467 00468 /** 00469 * \brief Set the issuer name for a Certificate 00470 * Issuer names should contain a comma-separated list 00471 * of OID types and values: 00472 * e.g. "C=UK,O=ARM,CN=mbed TLS CA" 00473 * 00474 * \param ctx CRT context to use 00475 * \param issuer_name issuer name to set 00476 * 00477 * \return 0 if issuer name was parsed successfully, or 00478 * a specific error code 00479 */ 00480 int mbedtls_x509write_crt_set_issuer_name( mbedtls_x509write_cert *ctx, 00481 const char *issuer_name ); 00482 00483 /** 00484 * \brief Set the subject name for a Certificate 00485 * Subject names should contain a comma-separated list 00486 * of OID types and values: 00487 * e.g. "C=UK,O=ARM,CN=mbed TLS Server 1" 00488 * 00489 * \param ctx CRT context to use 00490 * \param subject_name subject name to set 00491 * 00492 * \return 0 if subject name was parsed successfully, or 00493 * a specific error code 00494 */ 00495 int mbedtls_x509write_crt_set_subject_name( mbedtls_x509write_cert *ctx, 00496 const char *subject_name ); 00497 00498 /** 00499 * \brief Set the subject public key for the certificate 00500 * 00501 * \param ctx CRT context to use 00502 * \param key public key to include 00503 */ 00504 void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key ); 00505 00506 /** 00507 * \brief Set the issuer key used for signing the certificate 00508 * 00509 * \param ctx CRT context to use 00510 * \param key private key to sign with 00511 */ 00512 void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key ); 00513 00514 /** 00515 * \brief Set the MD algorithm to use for the signature 00516 * (e.g. MBEDTLS_MD_SHA1) 00517 * 00518 * \param ctx CRT context to use 00519 * \param md_alg MD algorithm to use 00520 */ 00521 void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx, mbedtls_md_type_t md_alg ); 00522 00523 /** 00524 * \brief Generic function to add to or replace an extension in the 00525 * CRT 00526 * 00527 * \param ctx CRT context to use 00528 * \param oid OID of the extension 00529 * \param oid_len length of the OID 00530 * \param critical if the extension is critical (per the RFC's definition) 00531 * \param val value of the extension OCTET STRING 00532 * \param val_len length of the value data 00533 * 00534 * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED 00535 */ 00536 int mbedtls_x509write_crt_set_extension( mbedtls_x509write_cert *ctx, 00537 const char *oid, size_t oid_len, 00538 int critical, 00539 const unsigned char *val, size_t val_len ); 00540 00541 /** 00542 * \brief Set the basicConstraints extension for a CRT 00543 * 00544 * \param ctx CRT context to use 00545 * \param is_ca is this a CA certificate 00546 * \param max_pathlen maximum length of certificate chains below this 00547 * certificate (only for CA certificates, -1 is 00548 * inlimited) 00549 * 00550 * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED 00551 */ 00552 int mbedtls_x509write_crt_set_basic_constraints( mbedtls_x509write_cert *ctx, 00553 int is_ca, int max_pathlen ); 00554 00555 #if defined(MBEDTLS_SHA1_C) 00556 /** 00557 * \brief Set the subjectKeyIdentifier extension for a CRT 00558 * Requires that mbedtls_x509write_crt_set_subject_key() has been 00559 * called before 00560 * 00561 * \param ctx CRT context to use 00562 * 00563 * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED 00564 */ 00565 int mbedtls_x509write_crt_set_subject_key_identifier( mbedtls_x509write_cert *ctx ); 00566 00567 /** 00568 * \brief Set the authorityKeyIdentifier extension for a CRT 00569 * Requires that mbedtls_x509write_crt_set_issuer_key() has been 00570 * called before 00571 * 00572 * \param ctx CRT context to use 00573 * 00574 * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED 00575 */ 00576 int mbedtls_x509write_crt_set_authority_key_identifier( mbedtls_x509write_cert *ctx ); 00577 #endif /* MBEDTLS_SHA1_C */ 00578 00579 /** 00580 * \brief Set the Key Usage Extension flags 00581 * (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN) 00582 * 00583 * \param ctx CRT context to use 00584 * \param key_usage key usage flags to set 00585 * 00586 * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED 00587 */ 00588 int mbedtls_x509write_crt_set_key_usage( mbedtls_x509write_cert *ctx, 00589 unsigned int key_usage ); 00590 00591 /** 00592 * \brief Set the Netscape Cert Type flags 00593 * (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL) 00594 * 00595 * \param ctx CRT context to use 00596 * \param ns_cert_type Netscape Cert Type flags to set 00597 * 00598 * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED 00599 */ 00600 int mbedtls_x509write_crt_set_ns_cert_type( mbedtls_x509write_cert *ctx, 00601 unsigned char ns_cert_type ); 00602 00603 /** 00604 * \brief Free the contents of a CRT write context 00605 * 00606 * \param ctx CRT context to free 00607 */ 00608 void mbedtls_x509write_crt_free( mbedtls_x509write_cert *ctx ); 00609 00610 /** 00611 * \brief Write a built up certificate to a X509 DER structure 00612 * Note: data is written at the end of the buffer! Use the 00613 * return value to determine where you should start 00614 * using the buffer 00615 * 00616 * \param ctx certificate to write away 00617 * \param buf buffer to write to 00618 * \param size size of the buffer 00619 * \param f_rng RNG function (for signature, see note) 00620 * \param p_rng RNG parameter 00621 * 00622 * \return length of data written if successful, or a specific 00623 * error code 00624 * 00625 * \note f_rng may be NULL if RSA is used for signature and the 00626 * signature is made offline (otherwise f_rng is desirable 00627 * for countermeasures against timing attacks). 00628 * ECDSA signatures always require a non-NULL f_rng. 00629 */ 00630 int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size, 00631 int (*f_rng)(void *, unsigned char *, size_t), 00632 void *p_rng ); 00633 00634 #if defined(MBEDTLS_PEM_WRITE_C) 00635 /** 00636 * \brief Write a built up certificate to a X509 PEM string 00637 * 00638 * \param ctx certificate to write away 00639 * \param buf buffer to write to 00640 * \param size size of the buffer 00641 * \param f_rng RNG function (for signature, see note) 00642 * \param p_rng RNG parameter 00643 * 00644 * \return 0 if successful, or a specific error code 00645 * 00646 * \note f_rng may be NULL if RSA is used for signature and the 00647 * signature is made offline (otherwise f_rng is desirable 00648 * for countermeasures against timing attacks). 00649 * ECDSA signatures always require a non-NULL f_rng. 00650 */ 00651 int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size, 00652 int (*f_rng)(void *, unsigned char *, size_t), 00653 void *p_rng ); 00654 #endif /* MBEDTLS_PEM_WRITE_C */ 00655 #endif /* MBEDTLS_X509_CRT_WRITE_C */ 00656 00657 #ifdef __cplusplus 00658 } 00659 #endif 00660 00661 #endif /* mbedtls_x509_crt.h */
Generated on Sun Jul 17 2022 08:25:33 by 1.7.2