History

Werkend met EMG; default tip

2018-10-12, by ThomBMT [Fri, 12 Oct 2018 09:27:32 +0000] rev 9

Werkend met EMG;

I am finally able to control the motor using the emg signal obtained from the bicep. This is still very rough and the signal will need to be filtered for this to work proporly but it is a good start;

2018-10-12, by ThomBMT [Fri, 12 Oct 2018 08:53:12 +0000] rev 8

I am finally able to control the motor using the emg signal obtained from the bicep. This is still very rough and the signal will need to be filtered for this to work proporly but it is a good start;

Tried to include emg operator. We can sort of read out the EMG values but only for a few itterations. Probably fixed by a ticker

2018-10-08, by ThomBMT [Mon, 08 Oct 2018 13:18:17 +0000] rev 7

Tried to include emg operator. We can sort of read out the EMG values but only for a few itterations. Probably fixed by a ticker

First attemps at reading out the EMG data and operating the motors using this

2018-10-08, by ThomBMT [Mon, 08 Oct 2018 10:48:52 +0000] rev 6

First attemps at reading out the EMG data and operating the motors using this

We now have a terminating statement when both the button for CW and CCW rotation are pressed together. The motor now stops rotating after this event

2018-10-08, by ThomBMT [Mon, 08 Oct 2018 08:25:44 +0000] rev 5

We now have a terminating statement when both the button for CW and CCW rotation are pressed together. The motor now stops rotating after this event

Problem, through testing, apperantly is in the HIDscope expression;

2018-10-05, by ThomBMT [Fri, 05 Oct 2018 11:42:05 +0000] rev 4

Problem, through testing, apperantly is in the HIDscope expression;

This code is broken, problem is likely in the Ticker since when this part is elliminated the code works;

2018-10-05, by ThomBMT [Fri, 05 Oct 2018 11:14:08 +0000] rev 3

This code is broken, problem is likely in the Ticker since when this part is elliminated the code works;

Motors can no longer be controlled. DONT USE;

2018-10-02, by ThomBMT [Tue, 02 Oct 2018 12:37:47 +0000] rev 2

Motors can no longer be controlled. DONT USE;

We finally were able to add the EMG-reading program into the main script. This now (sort off) works;

2018-10-01, by ThomBMT [Mon, 01 Oct 2018 13:42:56 +0000] rev 1

We finally were able to add the EMG-reading program into the main script. This now (sort off) works;

Overzetten;

2018-10-01, by ThomBMT [Mon, 01 Oct 2018 13:20:19 +0000] rev 0

Overzetten;