Adrian Polanco
/
STM32F103C8T6_Barrido_Displays13
4cv4.j
Embed:
(wiki syntax)
Show/hide line numbers
PinNames.h
00001 /* mbed Microcontroller Library 00002 ******************************************************************************* 00003 * Copyright (c) 2014, STMicroelectronics 00004 * All rights reserved. 00005 * 00006 * Redistribution and use in source and binary forms, with or without 00007 * modification, are permitted provided that the following conditions are met: 00008 * 00009 * 1. Redistributions of source code must retain the above copyright notice, 00010 * this list of conditions and the following disclaimer. 00011 * 2. Redistributions in binary form must reproduce the above copyright notice, 00012 * this list of conditions and the following disclaimer in the documentation 00013 * and/or other materials provided with the distribution. 00014 * 3. Neither the name of STMicroelectronics nor the names of its contributors 00015 * may be used to endorse or promote products derived from this software 00016 * without specific prior written permission. 00017 * 00018 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 00019 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 00020 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 00021 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 00022 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 00023 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 00024 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 00025 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 00026 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 00027 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 00028 ******************************************************************************* 00029 00030 */ 00031 #ifndef MBED_PINNAMES_H 00032 #define MBED_PINNAMES_H 00033 00034 #include "cmsis.h" 00035 #include "PinNamesTypes.h" 00036 00037 #ifdef __cplusplus 00038 extern "C" { 00039 #endif 00040 00041 typedef enum { 00042 // Not connected 00043 NC = (int)0xFFFFFFFF, 00044 00045 // Ports 00046 PA_0 = 0x00, 00047 PA_1 = 0x01, 00048 PA_2 = 0x02, 00049 PA_3 = 0x03, 00050 PA_4 = 0x04, 00051 PA_5 = 0x05, 00052 PA_6 = 0x06, 00053 PA_7 = 0x07, 00054 PA_8 = 0x08, 00055 PA_9 = 0x09, 00056 PA_10 = 0x0A, 00057 PA_11 = 0x0B, 00058 PA_12 = 0x0C, 00059 PA_13 = NC, 00060 PA_14 = NC, 00061 PA_15 = 0x0F, 00062 00063 PB_0 = 0x10, 00064 PB_1 = 0x11, 00065 PB_2 = NC, 00066 PB_3 = 0x13, 00067 PB_4 = 0x14, 00068 PB_5 = 0x15, 00069 PB_6 = 0x16, 00070 PB_7 = 0x17, 00071 PB_8 = 0x18, 00072 PB_9 = 0x19, 00073 PB_10 = 0x1A, 00074 PB_11 = 0x1B, 00075 PB_12 = 0x1C, 00076 PB_13 = 0x1D, 00077 PB_14 = 0x1E, 00078 PB_15 = 0x1F, 00079 00080 PC_0 = NC, 00081 PC_1 = NC, 00082 PC_2 = NC, 00083 PC_3 = NC, 00084 PC_4 = NC, 00085 PC_5 = NC, 00086 PC_6 = NC, 00087 PC_7 = NC, 00088 PC_8 = NC, 00089 PC_9 = NC, 00090 PC_10 = NC, 00091 PC_11 = NC, 00092 PC_12 = NC, 00093 PC_13 = 0x2D, 00094 PC_14 = 0x2E, 00095 PC_15 = 0x2F, 00096 00097 PD_2 = NC, 00098 00099 // ADC internal channels 00100 ADC_TEMP = 0xF0, 00101 ADC_VREF = 0xF1, 00102 00103 // Arduino connector namings 00104 A0 = PA_0, 00105 A1 = PA_1, 00106 A2 = PA_4, 00107 A3 = PB_0, 00108 A4 = NC, 00109 A5 = NC, 00110 D0 = PA_3, 00111 D1 = PA_2, 00112 D2 = PA_10, 00113 D3 = PB_3, 00114 D4 = PB_5, 00115 D5 = PB_4, 00116 D6 = PB_10, 00117 D7 = PA_8, 00118 D8 = PA_9, 00119 D9 = NC, 00120 D10 = PB_6, 00121 D11 = PA_7, 00122 D12 = PA_6, 00123 D13 = PA_5, 00124 D14 = PB_9, 00125 D15 = PB_8, 00126 00127 // Generic signals namings 00128 Red_Led = NC, 00129 Green_Led = PC_13, 00130 Blue_Led = NC, 00131 LED1 = PC_13, 00132 LED2 = NC, 00133 LED3 = NC, 00134 LED4 = NC, 00135 USER_BUTTON = NC, 00136 SERIAL_TX = PA_2, 00137 SERIAL_RX = PA_3, 00138 USBTX = PA_12, 00139 USBRX = PA_11, 00140 CANRX = PB_8, 00141 CANTX = PB_9, 00142 I2C_SCL = PB_8, 00143 I2C_SDA = PB_9, 00144 SPI_MOSI = PA_7, 00145 SPI_MISO = PA_6, 00146 SPI_SCK = PA_5, 00147 SPI_CS = PB_6, 00148 PWM_OUT = PB_3 00149 } PinName; 00150 00151 #ifdef __cplusplus 00152 } 00153 #endif 00154 00155 #endif 00156
Generated on Tue Jul 12 2022 23:43:59 by 1.7.2