Home Page : http://www.mcugear.com/en/ MCU Gear manual mode (circuit quick changer!) You can save 8 schematic(bank 0-7) manually and change it quickly.
Fork of MCUGear by
MCUGearM.h
00001 /* MCU Gear Library, only for testing MCUGear without any circuit you connected. 00002 * Copyright (c) 2013, NestEgg Inc., http://www.mcugear.com/ 00003 * 00004 * Permission is hereby granted, free of charge, to any person obtaining a copy 00005 * of this software and associated documentation files (the "Software"), to deal 00006 * in the Software without restriction, including without limitation the rights 00007 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 00008 * copies of the Software, and to permit persons to whom the Software is 00009 * furnished to do so, subject to the following conditions: 00010 * 00011 * The above copyright notice and this permission notice shall be included in 00012 * all copies or substantial portions of the Software. 00013 * 00014 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 00015 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 00016 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 00017 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 00018 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 00019 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 00020 * THE SOFTWARE. 00021 */ 00022 00023 #include "commonM.h" 00024 00025 class MCUGear 00026 { 00027 public: 00028 MCUGear(PinName sda, PinName scl, char addr); 00029 void disconnectModule(void); 00030 void connectModule(void); 00031 void savePinSetting(uint8_t number, unsigned char CPUPin, unsigned char Direction ,unsigned char ModulePin); 00032 uint8_t detectModule(void); 00033 void startReg(char bank); 00034 uint8_t setWire(uint8_t mcuIO, uint8_t direction, uint8_t moduleIO); 00035 void endReg(void); 00036 00037 protected: 00038 void fpga_write(unsigned char adr, unsigned char data); 00039 void write(uint8_t c); 00040 00041 uint8_t _addr; 00042 uint8_t _pnum; 00043 I2C _i2c; 00044 char _bank; 00045 00046 typedef enum { 00047 IO_REG_EN = 0x80, 00048 IO_REG_OUT_DIR = 0x40, 00049 IO_REG_IN_DIR = 0x00, 00050 IO_REG_DISABLE = 0x3f 00051 } en_fpga_io_reg; 00052 00053 }; 00054 00055 00056
Generated on Wed Jul 13 2022 04:22:36 by 1.7.2