Revision 5:ca16a7ea8bb4, committed 2015-12-11

Comitter:

Alex27

Date:

Fri Dec 11 00:49:59 2015 +0000

Parent:

4:a3e4bb2053cb

Commit message:

Hola

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/GettingStarted.htm	Fri Dec 11 00:49:59 2015 +0000
@@ -0,0 +1,1 @@
+<meta http-equiv="refresh" content="0; url=http://mbed.org/handbook/Getting-Started-mbed-Exporters#zip"/>
\ No newline at end of file

--- a/main.cpp	Sun Mar 29 13:12:07 2015 +0000
+++ b/main.cpp	Fri Dec 11 00:49:59 2015 +0000
@@ -1,76 +1,57 @@
-/* Hello World! for the TextLCD Enhanced Library*/
-
+// Hello World! for the TextLCD
+ 
 #include "mbed.h"
 #include "TextLCD.h"
  
-// Host PC Communication channels
-Serial pc(USBTX, USBRX); // tx, rx
- 
-// I2C Communication
-I2C i2c_lcd(p9,p10); // SDA, SCL
-//I2C i2c_lcd(p28,p27); // SDA, SCL
- 
-// SPI Communication
-SPI spi_lcd(p5, NC, p7); // MOSI, MISO, SCLK
+//Declaración del periferico SPI con sus pines a utilizar 
+SPI spi_lcd(PTD6, NC, PTD5); // MOSI, MISO, SCLK:::::Datos del ejemplo
+
+//Configuración de la libreria del LCD
+TextLCD_SPI lcd(&spi_lcd, PTD4, TextLCD::LCD16x2,TextLCD::HD44780); // SPI bus, CS pin, LCD Type ok
+
+AnalogIn an_pin(PTB1);              //Creación de la entrada analogica
+
+//PwmOut out_pwm(PTC1);               //Creación de una salida PWM
+
+float conv;
 
-// LCD instantiation 
-//TextLCD lcd(p15, p16, p17, p18, p19, p20, TextLCD::LCD20x2);        // 4bit bus: rs, e, d4-d7
-TextLCD_I2C lcd(&i2c_lcd, 0x40, TextLCD::LCD20x4);                  // I2C exp: I2C bus, PCF8574 Slaveaddress, LCD Type
-//TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD16x2, TextLCD::WS0010); // I2C exp: I2C bus, PCF8574 Slaveaddress, LCD Type, Ctrl Type
-//TextLCD_I2C lcd(&spi_lcd, p8, TextLCD::LCD24x4D);                   // I2C exp: SPI bus, CS pin, LCD Type
-//TextLCD_SPI_N lcd(&spi_lcd, p8, p9, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // SPI native: SPI bus, CS pin, RS pin, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032
-//TextLCD_I2C_N lcd(&i2c_lcd, ST7032_SA, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // I2C native: I2C bus, slaveaddress, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032 =Ok
-//TextLCD_I2C_N lcd(&i2c_lcd, SSD1803_SA1, TextLCD::LCD20x4D, NC, TextLCD::SSD1803_3V3); // I2C native: I2C bus, slaveaddress, LCDType=LCD20x4D, BL=NC, LCDTCtrl=SSD1803 =Ok
- 
-int main() {   
-  Timer t;
+int main() {
+    
+    int i=0;
+    conv=0;
+    // Limpieza del LCD     
+    lcd.cls();
 
-  pc.printf("TextLCD Enhanced Test. Columns=%d, Rows=%d\n\r", lcd.columns(), lcd.rows());
+    //Retardo de 0.5 segundos
+    wait(0.50);
+
+    //Posicionar al LCD en el espacio 0,0  ORIGEN
+    lcd.locate(0,0);
     
-  for (int row=0; row<lcd.rows(); row++) {
-    int col=0;
-      
-    pc.printf("MemAddr(Col=%d, Row=%d)=0x%02X\n\r", col, row, lcd.getAddress(col, row));      
-//    lcd.putc('-');
-    lcd.putc('0' + row);      
-      
-    for (col=1; col<lcd.columns()-1; col++) {    
-      lcd.putc('*');
-    }
- 
-    pc.printf("MemAddr(Col=%d, Row=%d)=0x%02X\n\r", col, row, lcd.getAddress(col, row));      
-    lcd.putc('+');       
-  }    
+    //Escritura de prueba
+    lcd.printf("Start PowerTip");
 
-// Fill screen again and time it
-  t.start();
+    wait(1.0);
+    
+    lcd.cls();
+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+/* Asignación del periodo para la salida del PWM*/
+
+    //out_pwm.period_ms(100);             //Asignación de un periodo de 100 mili-segundos
 
-  for (int row=0; row<lcd.rows(); row++) {
-    int col=0;
-      
-    lcd.putc('0' + row);      
-      
-    for (col=1; col<lcd.columns()-1; col++) {    
-      lcd.putc('*');
-    }
- 
-    lcd.putc('+');       
-  }    
-  t.stop();    
-  pc.printf("All my hard work took %f sec\r\n", t.read());          
+/*Codigos de prueba*/
+    
+    while(true){
+    lcd.cls();
+    
+    conv=an_pin.read();                 //Lectura del Pin Analogico
+    lcd.printf("Variable del ADC: i= %f ", conv);
+    //out_pwm.write(conv);                //Asignación del ancho de pulso de la señal PWM
+    wait(0.5);
+    i++;        
+        }
 
-// Show cursor as blinking character
-   lcd.setCursor(TextLCD::CurOff_BlkOn);
- 
-// Set and show user defined characters. A maximum of 8 UDCs are supported by the HD44780.
-// They are defined by a 5x7 bitpattern. 
-  lcd.setUDC(0, (char *) udc_0);  // Show |>
-  lcd.putc(0);    
-  lcd.setUDC(1, (char *) udc_1);  // Show <|
-  lcd.putc(1);    
-    
-  pc.printf("Bye now\r\n");          
+//FIN DEL PROGRAMA    
 }
 
 
-