Diff: C12832_lcd.cpp

Revision:

14:b834d587bf45

Parent:

13:8a9cad03124b

--- a/C12832_lcd.cpp	Wed Jan 01 08:41:07 2014 +0000
+++ b/C12832_lcd.cpp	Wed Jan 08 16:56:49 2014 +0000
@@ -102,7 +102,7 @@
 {
     _A0 = 0;
     _CS = 0;
-#if defined TARGET_LPC1768     // fast without mbed lib
+#if defined TARGET_LPC17699     // fast without mbed lib
     LPC_SSP1->DR = cmd;
     do {
     } while ((LPC_SSP1->SR & 0x10) == 0x10); // wait for SPI1 idle
@@ -118,7 +118,7 @@
 {
     _A0 = 1;
     _CS = 0;
-#if defined TARGET_LPC1768     // fast without mbed lib
+#if defined TARGET_LPC17699     // fast without mbed lib
     LPC_SSP1->DR = dat;
     do {
     } while ((LPC_SSP1->SR & 0x10) == 0x10); // wait for SPI1 idle
@@ -163,7 +163,7 @@
     wr_cmd(0xA6);     // display normal
 
 
-#if defined TARGET_LPC1768          //setup DMA channel 0       
+#if defined TARGET_LPC17699          //setup DMA channel 0       
     LPC_SC->PCONP |= (1UL << 29);   // Power up the GPDMA
     LPC_GPDMA->DMACConfig = 1;      // enable DMA controller
     LPC_GPDMA->DMACIntTCClear = 0x1;
@@ -202,7 +202,7 @@
 
 void C12832_LCD::copy_to_lcd(void)
 {
-#ifndef TARGET_LPC1768
+#ifndef TARGET_LPC17699
     int i;
 #endif
     //page 0
@@ -210,7 +210,7 @@
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB0);      // set page address  0
     _A0 = 1;
-#if defined TARGET_LPC1768
+#if defined TARGET_LPC17699
     _CS = 0;
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
@@ -237,7 +237,7 @@
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB1);      // set page address  1
     _A0 = 1;
-#if defined TARGET_LPC1768
+#if defined TARGET_LPC17699
     _CS = 0;
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMA->DMACIntTCClear = 0x1;
@@ -262,7 +262,7 @@
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB2);      // set page address  2
     _A0 = 1;
-#if defined TARGET_LPC1768
+#if defined TARGET_LPC17699
     _CS = 0;
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMA->DMACIntTCClear = 0x1;
@@ -289,7 +289,7 @@
     _A0 = 1;
 
     _CS = 0;
-#if defined TARGET_LPC1768
+#if defined TARGET_LPC17699
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMA->DMACIntTCClear = 0x1;
     LPC_GPDMA->DMACIntErrClr = 0x1;