Diff: main.cpp

Revision:

17:54182da7bbc2

Parent:

16:21b7d8fc9e36

Child:

18:f1958016e719

--- a/main.cpp	Sun Jul 14 06:27:32 2019 +0000
+++ b/main.cpp	Thu Jul 18 10:54:02 2019 +0000
@@ -47,6 +47,8 @@
 //      - add http://developer.mbed.org/teams/MaximIntegrated/code/max32630fthr/
 
 #include "mbed.h"
+// mbed shared event queue run onTimerTick() in Thread context not Interrupt context
+#include "mbed_events.h"
 #if defined(TARGET)
 // TARGET_NAME macros from targets/TARGET_Maxim/TARGET_MAX32625/device/mxc_device.h
 // Create a string definition for the TARGET
@@ -303,6 +305,22 @@
 const float ADC_FULL_SCALE_VOLTAGE = 1.500;
 //
 //--------------------------------------------------
+#elif defined(TARGET_MAX32620FTHR)
+#warning "TARGET_MAX32620FTHR not previously tested; need to define pins..."
+//#define USE_LEDS 0 ?
+#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
+#warning "TARGET_MAX32620FTHR not previously tested; need to verify ADC_FULL_SCALE_VOLTAGE..."
+const float ADC_FULL_SCALE_VOLTAGE = 1.200;
+//
+//--------------------------------------------------
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to define pins..."
+//#define USE_LEDS 0 ?
+#define analogIn4_IS_HIGH_RANGE_OF_analogIn0 1
+#warning "TARGET_MAX32620FTHR not previously tested; need to verify ADC_FULL_SCALE_VOLTAGE..."
+const float ADC_FULL_SCALE_VOLTAGE = 1.200;
+//
+//--------------------------------------------------
 #elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE)
 // TODO1: target NUCLEO_F446RE
 //
@@ -577,6 +595,32 @@
 DigitalOut spi2_max541_cs(SPI2_SS); // TARGET_MAX32635MBED: P2_7 Arduino 2x3-pin header
 #define HAS_SPI2_MAX541 1
 //
+#elif defined(TARGET_MAX32620FTHR)
+#warning "TARGET_MAX32620FTHR not previously tested; need to define SPI pins..."
+// Note to software maintainer:
+// when adding new platform support,
+// add another #elif block above to support the new platform
+//
+// SPI0 P0_ PMOD Port 0 Back access
+//SPI spi0(SPI0_MOSI, SPI0_MISO, SPI0_SCK); // mosi, miso, sclk spi1 TARGET_MAX32620FTHR: PMOD Port 0 Back access
+//DigitalOut spi_cs0(SPI0_SS); // TARGET_MAX32620FTHR: PMOD Port 0 Back access
+//
+// SPI1 P1_ PMOD Port 1 Top Access
+SPI spi(SPI1_MOSI, SPI1_MISO, SPI1_SCK); // mosi, miso, sclk spi1 TARGET_MAX32620FTHR: PMOD Port 1 Top Access
+DigitalOut spi_cs(SPI1_SS); // TARGET_MAX32620FTHR: PMOD Port 1 Top Access
+//
+// SPI2 P5_ Feather J1.11,12,13
+//SPI spi2(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi1 TARGET_MAX32620FTHR: Feather J1.11,12,13
+//DigitalOut spi_cs2(SPI2_SS); // TARGET_MAX32620FTHR: Feather J1.11,12,13
+//
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to define SPI pins..."
+// Note to software maintainer:
+// when adding new platform support,
+// add another #elif block above to support the new platform
+SPI spi(SPI_MOSI, SPI_MISO, SPI_SCK); // mosi, miso, sclk spi1 TARGET_MAX32625PICO: 15 P0_5 MOSI; 14 P0_6 MISO; 16 P0_4 SCLK
+DigitalOut spi_cs(SPI_SS); // TARGET_MAX32625PICO: 13 P0_7 SSEL
+//
 #elif defined(TARGET_MAX32600)
 SPI spi(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13
 DigitalOut spi_cs(SPI2_SS); // Generic: Arduino 10-pin header D10
@@ -598,8 +642,15 @@
 SPI spi(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi2 MAX32630FTHR: P5_1, P5_2, P5_0
 //
 DigitalOut spi_cs(P3_0);
+//
 #else
 // unknown target
+#warning "target not previously tested; need to define SPI pins..."
+// Note to software maintainer:
+// when adding new platform support,
+// add another #elif block above to support the new platform
+//SPI spi(SPI_MOSI, SPI_MISO, SPI_SCK); // mosi, miso, sclk spi1 TARGET_xxx: Arduino 10-pin header D11 D12 D13
+//DigitalOut spi_cs(SPI_CS); // TARGET_xxx: PX_x Arduino 10-pin header D10
 #endif
 #endif
 
@@ -717,6 +768,7 @@
 #elif defined(TARGET_LPC1768)
 #else
 // unknown target
+#warning "target not previously tested; need to define I2C pins..."
 #endif
 //
 #endif
@@ -771,6 +823,25 @@
 // Virtual serial port over USB
 // The baud rate does not affect the virtual USBSerial UART.
 USBSerial serial;
+//
+//--------------------------------------------------
+#elif defined(TARGET_MAX32620FTHR)
+#warning "TARGET_MAX32620FTHR not previously tested; need to define serial pins..."
+// Note to software maintainer:
+// when adding new platform support,
+// add another #elif block above to support the new platform
+//Serial serial(SERIAL_TX, SERIAL_RX);     // tx, rx
+Serial serial(USBTX, USBRX);     // tx, rx
+//Serial serial(UART_TX, UART_RX);     // tx, rx
+//
+//--------------------------------------------------
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to verify serial pins..."
+// Note to software maintainer:
+// when adding new platform support,
+// add another #elif block above to support the new platform
+Serial serial(UART_TX, UART_RX);     // tx, rx
+//
 //--------------------------------------------------
 #elif defined(TARGET_MAX32600)
     #include "USBSerial.h"
@@ -790,6 +861,18 @@
 Serial serial(USBTX, USBRX);     // tx, rx
 #else
 // unknown target
+#if defined(SERIAL_TX)
+#warning "target not previously tested; guess serial pins are SERIAL_TX, SERIAL_RX..."
+Serial serial(SERIAL_TX, SERIAL_RX);     // tx, rx
+#elif defined(USBTX)
+#warning "target not previously tested; guess serial pins are USBTX, USBRX..."
+Serial serial(USBTX, USBRX);     // tx, rx
+#elif defined(UART_TX)
+#warning "target not previously tested; guess serial pins are UART_TX, UART_RX..."
+Serial serial(UART_TX, UART_RX);     // tx, rx
+#else
+#warning "target not previously tested; need to define serial pins..."
+#endif
 #endif
 
 void on_immediate_0x21(); // Unicode (U+0021) ! EXCLAMATION MARK
@@ -1378,6 +1461,100 @@
     AnalogIn analogIn5(AIN_5); // TARGET_MAX32630 J1.6 AIN_5 = AIN1 / 5.0     fullscale is 6.0V
 #endif
 //--------------------------------------------------
+#elif defined(TARGET_MAX32620FTHR)
+#warning "TARGET_MAX32620FTHR not previously tested; need to verify analogIn0..."
+    #define HAS_analogIn0 1
+    #define HAS_analogIn1 1
+    #define HAS_analogIn2 1
+    #define HAS_analogIn3 1
+    #define HAS_analogIn4 1
+    #define HAS_analogIn5 1
+    #define HAS_analogIn6 1
+    #define HAS_analogIn7 1
+    #define HAS_analogIn8 1
+    #define HAS_analogIn9 1
+//    #define HAS_analogIn10 0
+//    #define HAS_analogIn11 0
+//    #define HAS_analogIn12 0
+//    #define HAS_analogIn13 0
+//    #define HAS_analogIn14 0
+//    #define HAS_analogIn15 0
+#if HAS_analogIn0
+    AnalogIn analogIn0(AIN_0); // TARGET_MAX32620FTHR J1.5 AIN_0 = AIN0 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn1
+    AnalogIn analogIn1(AIN_1); // TARGET_MAX32620FTHR J1.6 AIN_1 = AIN1 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn2
+    AnalogIn analogIn2(AIN_2); // TARGET_MAX32620FTHR J1.7 AIN_2 = AIN2 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn3
+    AnalogIn analogIn3(AIN_3); // TARGET_MAX32620FTHR J1.8 AIN_3 = AIN3 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn4
+    AnalogIn analogIn4(AIN_4); // TARGET_MAX32620FTHR J1.5 AIN_4 = AIN0 / 5.0     fullscale is 6.0V
+#endif
+#if HAS_analogIn5
+    AnalogIn analogIn5(AIN_5); // TARGET_MAX32620FTHR J1.6 AIN_5 = AIN1 / 5.0     fullscale is 6.0V
+#endif
+#if HAS_analogIn6
+    AnalogIn analogIn6(AIN_6); // TARGET_MAX32620FTHR AIN_6 = VDDB / 4.0     fullscale is 4.8V
+#endif
+#if HAS_analogIn7
+    AnalogIn analogIn7(AIN_7); // TARGET_MAX32620FTHR AIN_7 = VDD18          fullscale is 1.2V
+#endif
+#if HAS_analogIn8
+    AnalogIn analogIn8(AIN_8); // TARGET_MAX32620FTHR AIN_8 = VDD12          fullscale is 1.2V
+#endif
+#if HAS_analogIn9
+    AnalogIn analogIn9(AIN_9); // TARGET_MAX32620FTHR AIN_9 = VRTC / 2.0     fullscale is 2.4V
+#endif
+#if HAS_analogIn10
+    AnalogIn analogIn10(____); // TARGET_MAX32620FTHR AIN_10 = x undefined?
+#endif
+#if HAS_analogIn11
+    AnalogIn analogIn11(____); // TARGET_MAX32620FTHR AIN_11 = VDDIO / 4.0   fullscale is 4.8V
+#endif
+#if HAS_analogIn12
+    AnalogIn analogIn12(____); // TARGET_MAX32620FTHR AIN_12 = VDDIOH / 4.0  fullscale is 4.8V
+#endif
+#if HAS_analogIn13
+    AnalogIn analogIn13(____);
+#endif
+#if HAS_analogIn14
+    AnalogIn analogIn14(____);
+#endif
+#if HAS_analogIn15
+    AnalogIn analogIn15(____);
+#endif
+//--------------------------------------------------
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to verify analogIn0..."
+    #define HAS_analogIn0 1
+    #define HAS_analogIn1 1
+    #define HAS_analogIn2 1
+    #define HAS_analogIn3 1
+    #define HAS_analogIn4 1
+    #define HAS_analogIn5 1
+#if HAS_analogIn0
+    AnalogIn analogIn0(AIN_0); // TARGET_MAX32630 J1.5 AIN_0 = AIN0 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn1
+    AnalogIn analogIn1(AIN_1); // TARGET_MAX32630 J1.6 AIN_1 = AIN1 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn2
+    AnalogIn analogIn2(AIN_2); // TARGET_MAX32630 J1.7 AIN_2 = AIN2 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn3
+    AnalogIn analogIn3(AIN_3); // TARGET_MAX32630 J1.8 AIN_3 = AIN3 pin       fullscale is 1.2V
+#endif
+#if HAS_analogIn4
+    AnalogIn analogIn4(AIN_4); // TARGET_MAX32630 J1.5 AIN_4 = AIN0 / 5.0     fullscale is 6.0V
+#endif
+#if HAS_analogIn5
+    AnalogIn analogIn5(AIN_5); // TARGET_MAX32630 J1.6 AIN_5 = AIN1 / 5.0     fullscale is 6.0V
+#endif
+//--------------------------------------------------
 #elif defined(TARGET_MAX32600)
     #define HAS_analogIn0 1
     #define HAS_analogIn1 1
@@ -1641,15 +1818,28 @@
 #define HAS_BUTTON1_DEMO_INTERRUPT 1
 #define HAS_BUTTON2_DEMO 0
 #define HAS_BUTTON2_DEMO_INTERRUPT 0
+#elif defined(TARGET_MAX32625PICO)
+#warning "TARGET_MAX32625PICO not previously tested; need to define buttons..."
+#define HAS_BUTTON1_DEMO_INTERRUPT 1
+#define HAS_BUTTON2_DEMO 0
+#define HAS_BUTTON2_DEMO_INTERRUPT 0
 #elif defined(TARGET_MAX32625)
 #define HAS_BUTTON1_DEMO_INTERRUPT 1
 #define HAS_BUTTON2_DEMO_INTERRUPT 1
+#elif defined(TARGET_MAX32620FTHR)
+#warning "TARGET_MAX32620FTHR not previously tested; need to define buttons..."
+#define BUTTON1 SW1
+#define HAS_BUTTON1_DEMO_INTERRUPT 1
+#define HAS_BUTTON2_DEMO 0
+#define HAS_BUTTON2_DEMO_INTERRUPT 0
 #elif defined(TARGET_NUCLEO_F446RE)
 #define HAS_BUTTON1_DEMO_INTERRUPT 0
 #define HAS_BUTTON2_DEMO_INTERRUPT 0
 #elif defined(TARGET_NUCLEO_F401RE)
 #define HAS_BUTTON1_DEMO_INTERRUPT 0
 #define HAS_BUTTON2_DEMO_INTERRUPT 0
+#else
+#warning "target not previously tested; need to define buttons..."
 #endif
 //
 #ifndef HAS_BUTTON1_DEMO
@@ -1697,7 +1887,9 @@
 
 //--------------------------------------------------
 // Ticker is the periodic interrupt timer itself
+#ifndef USE_PERIODIC_TIMER
 #define USE_PERIODIC_TIMER 0
+#endif
 #if USE_PERIODIC_TIMER
 Ticker periodicInterruptTimer;
 us_timestamp_t periodicInterruptTimer_interval_usec = 50;
@@ -2424,6 +2616,24 @@
     ADC_FULL_SCALE_VOLTAGE, // analogIn13
     ADC_FULL_SCALE_VOLTAGE, // analogIn14
     ADC_FULL_SCALE_VOLTAGE // analogIn15
+# elif defined(TARGET_MAX32620FTHR)
+#warning "TARGET_MAX32620FTHR not previously tested; need to verify analogIn0..."
+    ADC_FULL_SCALE_VOLTAGE, // analogIn0
+    ADC_FULL_SCALE_VOLTAGE, // analogIn1
+    ADC_FULL_SCALE_VOLTAGE, // analogIn2
+    ADC_FULL_SCALE_VOLTAGE, // analogIn3
+    ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_4 = AIN0 / 5.0     fullscale is 6.0V
+    ADC_FULL_SCALE_VOLTAGE * 5.0f, // analogIn4 // AIN_5 = AIN1 / 5.0     fullscale is 6.0V
+    ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn6 // AIN_6 = VDDB / 4.0     fullscale is 4.8V
+    ADC_FULL_SCALE_VOLTAGE, // analogIn7 // AIN_7 = VDD18          fullscale is 1.2V
+    ADC_FULL_SCALE_VOLTAGE, // analogIn8 // AIN_8 = VDD12          fullscale is 1.2V
+    ADC_FULL_SCALE_VOLTAGE * 2.0f, // analogIn9 // AIN_9 = VRTC / 2.0     fullscale is 2.4V
+    ADC_FULL_SCALE_VOLTAGE, // analogIn10  // AIN_10 = x undefined?
+    ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn11 // AIN_11 = VDDIO / 4.0   fullscale is 4.8V
+    ADC_FULL_SCALE_VOLTAGE * 4.0f, // analogIn12 // AIN_12 = VDDIOH / 4.0  fullscale is 4.8V
+    ADC_FULL_SCALE_VOLTAGE, // analogIn13
+    ADC_FULL_SCALE_VOLTAGE, // analogIn14
+    ADC_FULL_SCALE_VOLTAGE // analogIn15
 #elif defined(TARGET_MAX32625MBED)
     ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn0 // fullscale is 1.2V
     ADC_FULL_SCALE_VOLTAGE * 1.0f, // analogIn1 // fullscale is 1.2V
@@ -2617,10 +2827,21 @@
     //us_timestamp_t interval_usec = 100000; // 100ms
     periodicInterruptTimer_interval_usec = 100000; // 100ms
 #  if HAS_DAPLINK_SERIAL
-    DAPLINKserial.printf("  Timer Enable %d us\r\n", periodicInterruptTimer_interval_usec);
+    DAPLINKserial.printf(" TE rate=%lluus -- Timer Enable\r\n", periodicInterruptTimer_interval_usec);
 #  endif
-    serial.printf(" Timer Enable %d us", periodicInterruptTimer_interval_usec);
+    serial.printf(" TE rate=%lluus -- Timer Enable", periodicInterruptTimer_interval_usec);
+#if 1
+    // mbed shared event queue run onTimerTick() in Thread context not Interrupt context
+    periodicInterruptTimer.attach_us(mbed_event_queue()->event(onTimerTick),
+                                     periodicInterruptTimer_interval_usec);
+    // Works if rate=620Hz or less, Fails if rate=750Hz
+    // MbedOS Error Info Error Status 0x80FF0144 code 324 module 255
+    // Assertion failed; id  location 0xBE6F  mbed-os.lib/events/Event.h+158
+    // Current thread main id 0x200036f8 entry 0xc22f stacksize 0x1000 stackmem 0x200026f8 sp 0x2007ff60 
+    // Seems not robust about overrun / sample rate too fast
+#else
     periodicInterruptTimer.attach_us(&onTimerTick, periodicInterruptTimer_interval_usec);
+#endif
     // -- periodicInterruptTimer.attach(&onTimerTick, interval_sec); // the address of the function to be attached (onTimerTick) and the interval (2 seconds)
     // -- periodicInterruptTimer.attach_us(&onTimerTick, interval_usec); // the address of the function to be attached (onTimerTick) and the interval (2 seconds)
     // -- periodicInterruptTimer.attach(Callback<void()> func, float t);
@@ -6351,6 +6572,28 @@
 # endif
 #endif // HAS_BUTTON2_DEMO_INTERRUPT
 
+#if defined(TARGET_MAX32630)
+    // Timer tick needs to be the highest priority (priority 0, the default).
+    // DAPLINKserial interferes with the timer tick interrupt.
+    // Lower the priority of the serial port interrupts to avoid disrupting onTimerTick() handler.
+    NVIC_SetPriority(UART0_IRQn, 2); // reservedBlueToothSerial(P0_1, P0_0) // 0=highest priority; 1=lower
+    NVIC_SetPriority(UART1_IRQn, 2); // DAPLINKserial(P2_1, P2_0) // 0=highest priority; 1=lower
+    NVIC_SetPriority(UART2_IRQn, 2); // reservedSerial(P3_1, P3_0) // 0=highest priority; 1=lower
+    NVIC_SetPriority(UART3_IRQn, 2); // reservedSerial(P5_4, P5_3) // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P0_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P1_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P2_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P3_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P4_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P5_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P6_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P7_IRQn, 2); // 0=highest priority; 1=lower
+    NVIC_SetPriority(GPIO_P8_IRQn, 2); // 0=highest priority; 1=lower
+    //~ NVIC_SetPriority(RTC0_IRQn, 0); // 0=highest priority; 1=lower
+    //~ NVIC_SetPriority(RTC3_IRQn, 0); // 0=highest priority; 1=lower
+    //~ NVIC_SetPriority(US_TIMER_IRQn, 0); // 0=highest priority; 1=lower
+#endif
+
 #if HAS_SPI
     // spi init
     // mode | POL PHA