Diff: main.cpp

Revision:

0:4fd1b0bd1594

Child:

1:5e587e213940

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Dec 22 00:23:52 2015 +0000
@@ -0,0 +1,91 @@
+ /* Copyright (c) 2015 NXP Semiconductors. MIT License
+*
+* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
+* and associated documentation files (the "Software"), to deal in the Software without
+* restriction, including without limitation the rights to use, copy, modify, merge, publish,
+* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included in all copies or
+* substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
+* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
+* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+#include "FXAS21002.h"
+#include "FXOS8700.h"  
+#include "mbed.h"
+#include "M2XStreamClient.h"
+#include "EthernetInterface.h"
+
+// Initialize Serial port
+Serial pc(USBTX, USBRX);
+
+// Initialize pins for I2C communication for sensors. Set jumpers J6,J7 in FRDM-STBC-AGM01 board accordingly.
+FXOS8700 accel(D14,D15);
+FXOS8700 mag(D14,D15);
+FXAS21002 gyro(D14,D15);
+
+// Set Sensor Stream details
+char deviceId[] = "8b34bc421abf15b7ec6471fa19513a98"; // Device you want to push to
+char streamAcc[] = "acc_rms"; // Stream you want to push to
+char streamMag[] = "mag_rms"; // Stream you want to push to
+char streamGyr[] = "gyr_rms"; // Stream you want to push to
+char m2xKey[] = "737018ea33de7760ab346c85ae2d9d27"; // Your M2X API Key or Master API Key
+
+int main()
+{
+    // Intialize Ethernet connection
+EthernetInterface eth;
+eth.init();
+eth.connect();
+printf("Success. Connected!. Device IP Address is %s\r\n", eth.getIPAddress());
+
+ // Initialize the M2X client
+Client client;
+M2XStreamClient m2xClient(&client, m2xKey);
+int ret;
+
+
+    // Configure Accelerometer FXOS8700, Magnetometer FXOS8700 & Gyroscope FXAS21002
+    accel.accel_config();
+    mag.mag_config();
+    gyro.gyro_config();
+
+    float accel_data[3]; float accel_rms=0.0;
+    float mag_data[3];   float mag_rms=0.0;
+    float gyro_data[3];  float gyro_rms=0.0;
+       
+    printf("Begin Data Acquisition from FXOS8700 and FXAS21002....\r\n\r\n");
+    wait(0.5);
+    
+    while(1)
+    {
+      accel.acquire_accel_data_g(accel_data);
+      accel_rms = sqrt(((accel_data[0]*accel_data[0])+(accel_data[1]*accel_data[1])+(accel_data[2]*accel_data[2]))/3);
+      printf("%4.2f,\t%4.2f,\t%4.2f,\t",accel_data[0],accel_data[1],accel_data[2]);
+      wait(0.01);
+      
+      mag.acquire_mag_data_uT(mag_data);
+      printf("%4.2f,\t%4.2f,\t%4.2f,\t",mag_data[0],mag_data[1],mag_data[2]);
+      mag_rms = sqrt(((mag_data[0]*mag_data[0])+(mag_data[1]*mag_data[1])+(mag_data[2]*mag_data[2]))/3);
+      wait(0.01);
+      
+      gyro.acquire_gyro_data_dps(gyro_data);
+      printf("%4.2f,\t%4.2f,\t%4.2f\r\n",gyro_data[0],gyro_data[1],gyro_data[2]);
+      gyro_rms = sqrt(((gyro_data[0]*gyro_data[0])+(gyro_data[1]*gyro_data[1])+(gyro_data[2]*gyro_data[2]))/3);
+      wait(0.01);
+      
+      ret = m2xClient.updateStreamValue(deviceId, streamAcc, accel_rms);
+      printf("send() returned %d\r\n", ret);
+      ret = m2xClient.updateStreamValue(deviceId, streamMag, mag_rms);
+      printf("send() returned %d\r\n", ret);
+      ret = m2xClient.updateStreamValue(deviceId, streamGyr, gyro_rms);
+      printf("send() returned %d\r\n", ret);
+      wait(1);
+    }
+      
+}
\ No newline at end of file