Important changes to forums

We’re making some changes to the Mbed forums. From 10th December 2019 all new discussions will take place on our new forum site. You can continue to reply to existing threads for the next two weeks. After that we will archive this forum so you can return to useful posts in the future.

Affordable and flexible platform to ease prototyping using a STM32F401RET6 microcontroller.

Flashing and running STM Nucleo board in Linux

23 Aug 2014

1. Install and start (as root from terminal) CuteCom to monitor /dev/ttyACM0 with baudrate settings 9600, 8, 1, No parity. 2. Copy your .bin file to /media/NUCLEO. Now you should see printf output of your sofware and mbed library error messages with CuteCom.

26 Aug 2014

Excellent! Thank you for the steps to make this work!

11 Oct 2016

I cannot see /dev/tyyACM0 in cutecom. I can open /dev/ttyUSB0 but this appears to have no output

11 Oct 2016

Ah I had to type it into cutecom. /dev/ttyACM0 was there when I did an "ls -l /dev"

You need to log in to post a reply