Keil Studio Cloud
Mistake on this page?
Report an issue in GitHub or email us
pppol2tp.h
Go to the documentation of this file.
1 /**
2  * @file
3  * Network Point to Point Protocol over Layer 2 Tunneling Protocol header file.
4  *
5  */
6 
7 /*
8  * Redistribution and use in source and binary forms, with or without modification,
9  * are permitted provided that the following conditions are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright notice,
12  * this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright notice,
14  * this list of conditions and the following disclaimer in the documentation
15  * and/or other materials provided with the distribution.
16  * 3. The name of the author may not be used to endorse or promote products
17  * derived from this software without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
20  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
21  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
22  * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
23  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
24  * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
27  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
28  * OF SUCH DAMAGE.
29  *
30  * This file is part of the lwIP TCP/IP stack.
31  *
32  */
33 
34 #include "ppp_opts.h"
35 #if PPP_SUPPORT && PPPOL2TP_SUPPORT /* don't build if not configured for use in ppp_opts.h */
36 
37 #ifndef PPPOL2TP_H
38 #define PPPOL2TP_H
39 
40 #include "ppp.h"
41 
42 #ifdef __cplusplus
43 extern "C" {
44 #endif
45 
46 /* Timeout */
47 #define PPPOL2TP_CONTROL_TIMEOUT (5*1000) /* base for quick timeout calculation */
48 #define PPPOL2TP_SLOW_RETRY (60*1000) /* persistent retry interval */
49 
50 #define PPPOL2TP_MAXSCCRQ 4 /* retry SCCRQ four times (quickly) */
51 #define PPPOL2TP_MAXICRQ 4 /* retry IRCQ four times */
52 #define PPPOL2TP_MAXICCN 4 /* retry ICCN four times */
53 
54 /* L2TP header flags */
55 #define PPPOL2TP_HEADERFLAG_CONTROL 0x8000
56 #define PPPOL2TP_HEADERFLAG_LENGTH 0x4000
57 #define PPPOL2TP_HEADERFLAG_SEQUENCE 0x0800
58 #define PPPOL2TP_HEADERFLAG_OFFSET 0x0200
59 #define PPPOL2TP_HEADERFLAG_PRIORITY 0x0100
60 #define PPPOL2TP_HEADERFLAG_VERSION 0x0002
61 
62 /* Mandatory bits for control: Control, Length, Sequence, Version 2 */
63 #define PPPOL2TP_HEADERFLAG_CONTROL_MANDATORY (PPPOL2TP_HEADERFLAG_CONTROL|PPPOL2TP_HEADERFLAG_LENGTH|PPPOL2TP_HEADERFLAG_SEQUENCE|PPPOL2TP_HEADERFLAG_VERSION)
64 /* Forbidden bits for control: Offset, Priority */
65 #define PPPOL2TP_HEADERFLAG_CONTROL_FORBIDDEN (PPPOL2TP_HEADERFLAG_OFFSET|PPPOL2TP_HEADERFLAG_PRIORITY)
66 
67 /* Mandatory bits for data: Version 2 */
68 #define PPPOL2TP_HEADERFLAG_DATA_MANDATORY (PPPOL2TP_HEADERFLAG_VERSION)
69 
70 /* AVP (Attribute Value Pair) header */
71 #define PPPOL2TP_AVPHEADERFLAG_MANDATORY 0x8000
72 #define PPPOL2TP_AVPHEADERFLAG_HIDDEN 0x4000
73 #define PPPOL2TP_AVPHEADERFLAG_LENGTHMASK 0x03ff
74 
75 /* -- AVP - Message type */
76 #define PPPOL2TP_AVPTYPE_MESSAGE 0 /* Message type */
77 
78 /* Control Connection Management */
79 #define PPPOL2TP_MESSAGETYPE_SCCRQ 1 /* Start Control Connection Request */
80 #define PPPOL2TP_MESSAGETYPE_SCCRP 2 /* Start Control Connection Reply */
81 #define PPPOL2TP_MESSAGETYPE_SCCCN 3 /* Start Control Connection Connected */
82 #define PPPOL2TP_MESSAGETYPE_STOPCCN 4 /* Stop Control Connection Notification */
83 #define PPPOL2TP_MESSAGETYPE_HELLO 6 /* Hello */
84 /* Call Management */
85 #define PPPOL2TP_MESSAGETYPE_OCRQ 7 /* Outgoing Call Request */
86 #define PPPOL2TP_MESSAGETYPE_OCRP 8 /* Outgoing Call Reply */
87 #define PPPOL2TP_MESSAGETYPE_OCCN 9 /* Outgoing Call Connected */
88 #define PPPOL2TP_MESSAGETYPE_ICRQ 10 /* Incoming Call Request */
89 #define PPPOL2TP_MESSAGETYPE_ICRP 11 /* Incoming Call Reply */
90 #define PPPOL2TP_MESSAGETYPE_ICCN 12 /* Incoming Call Connected */
91 #define PPPOL2TP_MESSAGETYPE_CDN 14 /* Call Disconnect Notify */
92 /* Error reporting */
93 #define PPPOL2TP_MESSAGETYPE_WEN 15 /* WAN Error Notify */
94 /* PPP Session Control */
95 #define PPPOL2TP_MESSAGETYPE_SLI 16 /* Set Link Info */
96 
97 /* -- AVP - Result code */
98 #define PPPOL2TP_AVPTYPE_RESULTCODE 1 /* Result code */
99 #define PPPOL2TP_RESULTCODE 1 /* General request to clear control connection */
100 
101 /* -- AVP - Protocol version (!= L2TP Header version) */
102 #define PPPOL2TP_AVPTYPE_VERSION 2
103 #define PPPOL2TP_VERSION 0x0100 /* L2TP Protocol version 1, revision 0 */
104 
105 /* -- AVP - Framing capabilities */
106 #define PPPOL2TP_AVPTYPE_FRAMINGCAPABILITIES 3 /* Bearer capabilities */
107 #define PPPOL2TP_FRAMINGCAPABILITIES 0x00000003 /* Async + Sync framing */
108 
109 /* -- AVP - Bearer capabilities */
110 #define PPPOL2TP_AVPTYPE_BEARERCAPABILITIES 4 /* Bearer capabilities */
111 #define PPPOL2TP_BEARERCAPABILITIES 0x00000003 /* Analog + Digital Access */
112 
113 /* -- AVP - Tie breaker */
114 #define PPPOL2TP_AVPTYPE_TIEBREAKER 5
115 
116 /* -- AVP - Host name */
117 #define PPPOL2TP_AVPTYPE_HOSTNAME 7 /* Host name */
118 #define PPPOL2TP_HOSTNAME "ppp" /* FIXME: make it configurable */
119 
120 /* -- AVP - Vendor name */
121 #define PPPOL2TP_AVPTYPE_VENDORNAME 8 /* Vendor name */
122 #define PPPOL2TP_VENDORNAME "ppp" /* FIXME: make it configurable */
123 
124 /* -- AVP - Assign tunnel ID */
125 #define PPPOL2TP_AVPTYPE_TUNNELID 9 /* Assign Tunnel ID */
126 
127 /* -- AVP - Receive window size */
128 #define PPPOL2TP_AVPTYPE_RECEIVEWINDOWSIZE 10 /* Receive window size */
129 #define PPPOL2TP_RECEIVEWINDOWSIZE 8 /* FIXME: make it configurable */
130 
131 /* -- AVP - Challenge */
132 #define PPPOL2TP_AVPTYPE_CHALLENGE 11 /* Challenge */
133 
134 /* -- AVP - Cause code */
135 #define PPPOL2TP_AVPTYPE_CAUSECODE 12 /* Cause code*/
136 
137 /* -- AVP - Challenge response */
138 #define PPPOL2TP_AVPTYPE_CHALLENGERESPONSE 13 /* Challenge response */
139 #define PPPOL2TP_AVPTYPE_CHALLENGERESPONSE_SIZE 16
140 
141 /* -- AVP - Assign session ID */
142 #define PPPOL2TP_AVPTYPE_SESSIONID 14 /* Assign Session ID */
143 
144 /* -- AVP - Call serial number */
145 #define PPPOL2TP_AVPTYPE_CALLSERIALNUMBER 15 /* Call Serial Number */
146 
147 /* -- AVP - Framing type */
148 #define PPPOL2TP_AVPTYPE_FRAMINGTYPE 19 /* Framing Type */
149 #define PPPOL2TP_FRAMINGTYPE 0x00000001 /* Sync framing */
150 
151 /* -- AVP - TX Connect Speed */
152 #define PPPOL2TP_AVPTYPE_TXCONNECTSPEED 24 /* TX Connect Speed */
153 #define PPPOL2TP_TXCONNECTSPEED 100000000 /* Connect speed: 100 Mbits/s */
154 
155 /* L2TP Session state */
156 #define PPPOL2TP_STATE_INITIAL 0
157 #define PPPOL2TP_STATE_SCCRQ_SENT 1
158 #define PPPOL2TP_STATE_ICRQ_SENT 2
159 #define PPPOL2TP_STATE_ICCN_SENT 3
160 #define PPPOL2TP_STATE_DATA 4
161 
162 #define PPPOL2TP_OUTPUT_DATA_HEADER_LEN 6 /* Our data header len */
163 
164 /*
165  * PPPoL2TP interface control block.
166  */
167 typedef struct pppol2tp_pcb_s pppol2tp_pcb;
168 struct pppol2tp_pcb_s {
169  ppp_pcb *ppp; /* PPP PCB */
170  u8_t phase; /* L2TP phase */
171  struct udp_pcb *udp; /* UDP L2TP Socket */
172  struct netif *netif; /* Output interface, used as a default route */
173  ip_addr_t remote_ip; /* LNS IP Address */
174  u16_t remote_port; /* LNS port */
175 #if PPPOL2TP_AUTH_SUPPORT
176  const u8_t *secret; /* Secret string */
177  u8_t secret_len; /* Secret string length */
178  u8_t secret_rv[16]; /* Random vector */
179  u8_t challenge_hash[16]; /* Challenge response */
180  u8_t send_challenge; /* Boolean whether the next sent packet should contains a challenge response */
181 #endif /* PPPOL2TP_AUTH_SUPPORT */
182 
183  u16_t tunnel_port; /* Tunnel port */
184  u16_t our_ns; /* NS to peer */
185  u16_t peer_nr; /* NR from peer */
186  u16_t peer_ns; /* Expected NS from peer */
187  u16_t source_tunnel_id; /* Tunnel ID assigned by peer */
188  u16_t remote_tunnel_id; /* Tunnel ID assigned to peer */
189  u16_t source_session_id; /* Session ID assigned by peer */
190  u16_t remote_session_id; /* Session ID assigned to peer */
191 
192  u8_t sccrq_retried; /* number of SCCRQ retries already done */
193  u8_t icrq_retried; /* number of ICRQ retries already done */
194  u8_t iccn_retried; /* number of ICCN retries already done */
195 };
196 
197 
198 /* Create a new L2TP session. */
199 ppp_pcb *pppol2tp_create(struct netif *pppif,
200  struct netif *netif, const ip_addr_t *ipaddr, u16_t port,
201  const u8_t *secret, u8_t secret_len,
202  ppp_link_status_cb_fn link_status_cb, void *ctx_cb);
203 
204 #ifdef __cplusplus
205 }
206 #endif
207 
208 #endif /* PPPOL2TP_H */
209 #endif /* PPP_SUPPORT && PPPOL2TP_SUPPORT */
netif
Generic data structure used for all lwIP network interfaces.
Definition: ppp_service_if.h:157
nsapi_addr
IP address structure for passing IP addresses by value.
Definition: nsapi_types.h:235
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.