Keil Studio Cloud
Mistake on this page?
Report an issue in GitHub or email us
nrf6310.h
1 /**
2  * Copyright (c) 2012 - 2019, Nordic Semiconductor ASA
3  *
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without modification,
7  * are permitted provided that the following conditions are met:
8  *
9  * 1. Redistributions of source code must retain the above copyright notice, this
10  * list of conditions and the following disclaimer.
11  *
12  * 2. Redistributions in binary form, except as embedded into a Nordic
13  * Semiconductor ASA integrated circuit in a product or a software update for
14  * such product, must reproduce the above copyright notice, this list of
15  * conditions and the following disclaimer in the documentation and/or other
16  * materials provided with the distribution.
17  *
18  * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
19  * contributors may be used to endorse or promote products derived from this
20  * software without specific prior written permission.
21  *
22  * 4. This software, with or without modification, must only be used with a
23  * Nordic Semiconductor ASA integrated circuit.
24  *
25  * 5. Any software provided in binary form under this license must not be reverse
26  * engineered, decompiled, modified and/or disassembled.
27  *
28  * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
29  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
30  * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
31  * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
32  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
33  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
34  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
36  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
37  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38  *
39  */
40 #ifndef NRF6310_H__
41 #define NRF6310_H__
42 
43 #ifdef __cplusplus
44 extern "C" {
45 #endif
46 
47 #define LED_START 8
48 #define LED_0 8
49 #define LED_1 9
50 #define LED_2 10
51 #define LED_3 11
52 #define LED_4 12
53 #define LED_5 13
54 #define LED_6 14
55 #define LED_7 15
56 #define LED_STOP 15
57 
58 #define BSP_LED_0 LED_0
59 #define BSP_LED_1 LED_1
60 #define BSP_LED_2 LED_2
61 #define BSP_LED_3 LED_3
62 #define BSP_LED_4 LED_4
63 #define BSP_LED_5 LED_5
64 #define BSP_LED_6 LED_6
65 #define BSP_LED_7 LED_7
66 
67 #define LEDS_ACTIVE_STATE 1
68 
69 #define BUTTON_START 0
70 #define BUTTON_0 0
71 #define BUTTON_1 1
72 #define BUTTON_2 2
73 #define BUTTON_3 3
74 #define BUTTON_4 4
75 #define BUTTON_5 5
76 #define BUTTON_6 6
77 #define BUTTON_7 7
78 #define BUTTON_STOP 7
79 #define BUTTON_PULL NRF_GPIO_PIN_NOPULL
80 
81 #define BSP_BUTTON_0 BUTTON_0
82 #define BSP_BUTTON_1 BUTTON_1
83 #define BSP_BUTTON_2 BUTTON_2
84 #define BSP_BUTTON_3 BUTTON_3
85 #define BSP_BUTTON_4 BUTTON_4
86 #define BSP_BUTTON_5 BUTTON_5
87 #define BSP_BUTTON_6 BUTTON_6
88 #define BSP_BUTTON_7 BUTTON_7
89 
90 #define BUTTONS_ACTIVE_STATE 1
91 
92 #define BUTTONS_LIST {BUTTON_0, BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4, BUTTON_5, BUTTON_6, BUTTON_7}
93 #define LEDS_LIST {LED_0, LED_1, LED_2, LED_3, LED_4, LED_5, LED_6, LED_7}
94 
95 #define LEDS_INV_MASK 0x00000000
96 
97 #define BUTTONS_NUMBER 8
98 #define LEDS_NUMBER 8
99 
100 #define RX_PIN_NUMBER 16 // UART RX pin number.
101 #define TX_PIN_NUMBER 17 // UART TX pin number.
102 #define CTS_PIN_NUMBER 18 // UART Clear To Send pin number. Not used if HWFC is set to false.
103 #define RTS_PIN_NUMBER 19 // UART Request To Send pin number. Not used if HWFC is set to false.
104 #define HWFC false // UART hardware flow control.
105 
106 #define SPIS_MISO_PIN 20 // SPI MISO signal.
107 #define SPIS_CSN_PIN 21 // SPI CSN signal.
108 #define SPIS_MOSI_PIN 22 // SPI MOSI signal.
109 #define SPIS_SCK_PIN 23 // SPI SCK signal.
110 
111 #define SPIM0_SCK_PIN 23u /**< SPI clock GPIO pin number. */
112 #define SPIM0_MOSI_PIN 20u /**< SPI Master Out Slave In GPIO pin number. */
113 #define SPIM0_MISO_PIN 22u /**< SPI Master In Slave Out GPIO pin number. */
114 #define SPIM0_SS_PIN 21u /**< SPI Slave Select GPIO pin number. */
115 
116 #define SPIM1_SCK_PIN 16u /**< SPI clock GPIO pin number. */
117 #define SPIM1_MOSI_PIN 18u /**< SPI Master Out Slave In GPIO pin number. */
118 #define SPIM1_MISO_PIN 17u /**< SPI Master In Slave Out GPIO pin number. */
119 #define SPIM1_SS_PIN 19u /**< SPI Slave Select GPIO pin number. */
120 
121 // serialization APPLICATION board
122 #define SER_APP_RX_PIN 16 // UART RX pin number.
123 #define SER_APP_TX_PIN 17 // UART TX pin number.
124 #define SER_APP_CTS_PIN 18 // UART Clear To Send pin number.
125 #define SER_APP_RTS_PIN 19 // UART Request To Send pin number.
126 
127 #if 0
128 #define SER_APP_SPIM0_SCK_PIN 20 // SPI clock GPIO pin number.
129 #define SER_APP_SPIM0_MOSI_PIN 17 // SPI Master Out Slave In GPIO pin number
130 #define SER_APP_SPIM0_MISO_PIN 16 // SPI Master In Slave Out GPIO pin number
131 #define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number
132 #define SER_APP_SPIM0_RDY_PIN 19 // SPI READY GPIO pin number
133 #define SER_APP_SPIM0_REQ_PIN 18 // SPI REQUEST GPIO pin number
134 #else
135 #define SER_APP_SPIM0_SCK_PIN 23 // SPI clock GPIO pin number.
136 #define SER_APP_SPIM0_MOSI_PIN 20 // SPI Master Out Slave In GPIO pin number
137 #define SER_APP_SPIM0_MISO_PIN 22 // SPI Master In Slave Out GPIO pin number
138 #define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number
139 #define SER_APP_SPIM0_RDY_PIN 29 // SPI READY GPIO pin number
140 #define SER_APP_SPIM0_REQ_PIN 28 // SPI REQUEST GPIO pin number
141 
142 #endif
143 
144 // serialization CONNECTIVITY board
145 #if 0
146 #define SER_CON_RX_PIN 17 // UART RX pin number.
147 #define SER_CON_TX_PIN 16 // UART TX pin number.
148 #define SER_CON_CTS_PIN 19 // UART Clear To Send pin number. Not used if HWFC is set to false.
149 #define SER_CON_RTS_PIN 18 // UART Request To Send pin number. Not used if HWFC is set to false.
150 #else
151 #define SER_CON_RX_PIN 16 // UART RX pin number.
152 #define SER_CON_TX_PIN 17 // UART TX pin number.
153 #define SER_CON_CTS_PIN 18 // UART Clear To Send pin number. Not used if HWFC is set to false.
154 #define SER_CON_RTS_PIN 19 // UART Request To Send pin number. Not used if HWFC is set to false.
155 #endif
156 
157 #if 0
158 #define SER_CON_SPIS_SCK_PIN 20 // SPI SCK signal.
159 #define SER_CON_SPIS_MISO_PIN 16 // SPI MISO signal.
160 #define SER_CON_SPIS_MOSI_PIN 17 // SPI MOSI signal.
161 #define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal.
162 #define SER_CON_SPIS_RDY_PIN 19 // SPI READY GPIO pin number.
163 #define SER_CON_SPIS_REQ_PIN 18 // SPI REQUEST GPIO pin number.
164 #else
165 #define SER_CON_SPIS_SCK_PIN 23 // SPI SCK signal.
166 #define SER_CON_SPIS_MOSI_PIN 22 // SPI MOSI signal.
167 #define SER_CON_SPIS_MISO_PIN 20 // SPI MISO signal.
168 #define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal.
169 #define SER_CON_SPIS_RDY_PIN 29 // SPI READY GPIO pin number.
170 #define SER_CON_SPIS_REQ_PIN 28 // SPI REQUEST GPIO pin number.
171 #endif
172 
173 #define SER_CONN_ASSERT_LED_PIN LED_2
174 
175 
176 #ifdef __cplusplus
177 }
178 #endif
179 
180 #endif // NRF6310_H__
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.