Mbed OS Reference | flash_configs.h Source File

 /* mbed Microcontroller Library
  * Copyright (c) 2018-2018 ARM Limited
  * SPDX-License-Identifier: Apache-2.0
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 
 #ifndef MBED_FLASH_CONFIGS_H
 #define MBED_FLASH_CONFIGS_H
 
 #if defined(TARGET_MX25R6435F)
 #include "MX25RXX35F_config.h"
 
 #elif defined(TARGET_DISCO_L476VG)
 #include "N25Q128A_config.h" // N25Q128A13EF840E
 /* See STM32L476 Errata Sheet, it is not possible to use Dual-/Quad-mode for the command phase */
 #undef QSPI_CMD_READ_DPI
 #undef QSPI_CMD_READ_QPI
 #undef QSPI_CMD_WRITE_DPI
 #undef QSPI_CMD_WRITE_QPI
 
 #elif defined(TARGET_N25Q128A)
 #include "N25Q128A_config.h"
 
 #elif defined(TARGET_MX25L51245G)
 #include "MX25L51245G_config.h"
 
 #elif defined(TARGET_MX25LM51245G)
 #include "MX25LM51245G_config.h"
 
 #elif defined(TARGET_RHOMBIO_L476DMW1K)
 #include "MT25Q_config.h" // MT25QL128ABA1EW7
 /* See STM32L476 Errata Sheet, it is not possible to use Dual-/Quad-mode for the command phase */
 #undef QSPI_CMD_READ_DPI
 #undef QSPI_CMD_READ_QPI
 #undef QSPI_CMD_WRITE_DPI
 #undef QSPI_CMD_WRITE_QPI
 
 #elif defined(TARGET_MTS_DRAGONFLY_L496VG)
 #include "MT25Q_config.h"
 
 #elif defined(TARGET_NRF52840)
 #if TARGET_EP_AGORA
 #include "NORDIC/EP_AGORA/flash_config.h"
 #else
 #include "NORDIC/NRF52840_DK/flash_config.h"
 #endif
 
 #elif defined(TARGET_EFM32GG11_STK3701)
 #include "SiliconLabs/EFM32GG11_STK3701/flash_config.h"
 
 #elif defined(TARGET_K82F)
 #include "NXP/K82F/flash_config.h"
 
 #elif defined(TARGET_LPC546XX)
 #include "NXP/LPC546XX/flash_config.h"
 
 #elif(  defined(TARGET_CY8CKIT_062_BLE) ||          \
         defined(TARGET_CY8CKIT_062_WIFI_BT) ||      \
         defined(TARGET_CY8CKIT_062S2_43012) ||      \
         defined(TARGET_CY8CKIT_062S2_4343W) ||      \
         defined(TARGET_CY8CKIT_064S2_4343W) ||      \
         defined(TARGET_CY8CKIT064B0S2_4343W) ||    \
         defined(TARGET_CY8CPROTO_062_4343W) ||      \
         defined(TARGET_CY8CPROTO_062S2_43012) ||    \
         defined(TARGET_CY8CPROTO_062S3_4343W) ||    \
         defined(TARGET_CYW9P62S1_43438EVB_01) ||   \
         defined(TARGET_CYSBSYSKIT_01))
 #include "S25FL512S_config.h"
 
 #elif   defined(TARGET_CYW9P62S1_43012EVB_01)
 #include "S25FS512S_config.h"
 
 #endif
 
 #endif // MBED_FLASH_CONFIGS_H
Important Information for this Arm website
