Mbed OS Reference | pca10028.h Source File

 /**
  * Copyright (c) 2014 - 2019, Nordic Semiconductor ASA
  *
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice, this
  *    list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form, except as embedded into a Nordic
  *    Semiconductor ASA integrated circuit in a product or a software update for
  *    such product, must reproduce the above copyright notice, this list of
  *    conditions and the following disclaimer in the documentation and/or other
  *    materials provided with the distribution.
  *
  * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
  *    contributors may be used to endorse or promote products derived from this
  *    software without specific prior written permission.
  *
  * 4. This software, with or without modification, must only be used with a
  *    Nordic Semiconductor ASA integrated circuit.
  *
  * 5. Any software provided in binary form under this license must not be reverse
  *    engineered, decompiled, modified and/or disassembled.
  *
  * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  */
 #ifndef PCA10028_H
 #define PCA10028_H
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 #include "nrf_gpio.h"
 
 // LEDs definitions for PCA10028
 #define LEDS_NUMBER    4
 
 #define LED_START      21
 #define LED_1          21
 #define LED_2          22
 #define LED_3          23
 #define LED_4          24
 #define LED_STOP       24
 
 #define LEDS_ACTIVE_STATE 0
 
 #define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
 
 #define LEDS_INV_MASK  LEDS_MASK
 
 #define BSP_LED_0      LED_1
 #define BSP_LED_1      LED_2
 #define BSP_LED_2      LED_3
 #define BSP_LED_3      LED_4
 
 #define BUTTONS_NUMBER 4
 
 #define BUTTON_START   17
 #define BUTTON_1       17
 #define BUTTON_2       18
 #define BUTTON_3       19
 #define BUTTON_4       20
 #define BUTTON_STOP    20
 #define BUTTON_PULL    NRF_GPIO_PIN_PULLUP
 
 #define BUTTONS_ACTIVE_STATE 0
 
 #define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
 
 #define BSP_BUTTON_0   BUTTON_1
 #define BSP_BUTTON_1   BUTTON_2
 #define BSP_BUTTON_2   BUTTON_3
 #define BSP_BUTTON_3   BUTTON_4
 
 #define RX_PIN_NUMBER  11
 #define TX_PIN_NUMBER  9
 #define CTS_PIN_NUMBER 10
 #define RTS_PIN_NUMBER 8
 #define HWFC           true
 
 #define SPIS_MISO_PIN  28    // SPI MISO signal.
 #define SPIS_CSN_PIN   12    // SPI CSN signal.
 #define SPIS_MOSI_PIN  25    // SPI MOSI signal.
 #define SPIS_SCK_PIN   29    // SPI SCK signal.
 
 #define SPIM0_SCK_PIN       4     /**< SPI clock GPIO pin number. */
 #define SPIM0_MOSI_PIN      1     /**< SPI Master Out Slave In GPIO pin number. */
 #define SPIM0_MISO_PIN      3     /**< SPI Master In Slave Out GPIO pin number. */
 #define SPIM0_SS_PIN        2     /**< SPI Slave Select GPIO pin number. */
 
 #define SPIM1_SCK_PIN       15     /**< SPI clock GPIO pin number. */
 #define SPIM1_MOSI_PIN      12     /**< SPI Master Out Slave In GPIO pin number. */
 #define SPIM1_MISO_PIN      14     /**< SPI Master In Slave Out GPIO pin number. */
 #define SPIM1_SS_PIN        13     /**< SPI Slave Select GPIO pin number. */
 
 // serialization APPLICATION board
 #define SER_CONN_CHIP_RESET_PIN     12    // Pin used to reset connectivity chip
 
 #define SER_APP_RX_PIN              25    // UART RX pin number.
 #define SER_APP_TX_PIN              28    // UART TX pin number.
 #define SER_APP_CTS_PIN             0     // UART Clear To Send pin number.
 #define SER_APP_RTS_PIN             29    // UART Request To Send pin number.
 
 #define SER_APP_SPIM0_SCK_PIN       7     // SPI clock GPIO pin number.
 #define SER_APP_SPIM0_MOSI_PIN      0     // SPI Master Out Slave In GPIO pin number
 #define SER_APP_SPIM0_MISO_PIN      30    // SPI Master In Slave Out GPIO pin number
 #define SER_APP_SPIM0_SS_PIN        25    // SPI Slave Select GPIO pin number
 #define SER_APP_SPIM0_RDY_PIN       29    // SPI READY GPIO pin number
 #define SER_APP_SPIM0_REQ_PIN       28    // SPI REQUEST GPIO pin number
 
 // serialization CONNECTIVITY board
 #define SER_CON_RX_PIN              28    // UART RX pin number.
 #define SER_CON_TX_PIN              25    // UART TX pin number.
 #define SER_CON_CTS_PIN             29    // UART Clear To Send pin number. Not used if HWFC is set to false.
 #define SER_CON_RTS_PIN             0    // UART Request To Send pin number. Not used if HWFC is set to false.
 
 
 #define SER_CON_SPIS_SCK_PIN        7     // SPI SCK signal.
 #define SER_CON_SPIS_MOSI_PIN       0     // SPI MOSI signal.
 #define SER_CON_SPIS_MISO_PIN       30    // SPI MISO signal.
 #define SER_CON_SPIS_CSN_PIN        25    // SPI CSN signal.
 #define SER_CON_SPIS_RDY_PIN        29    // SPI READY GPIO pin number.
 #define SER_CON_SPIS_REQ_PIN        28    // SPI REQUEST GPIO pin number.
 
 // Arduino board mappings
 #define ARDUINO_SCL_PIN             7     // SCL signal pin
 #define ARDUINO_SDA_PIN             30    // SDA signal pin
 #define ARDUINO_AREF_PIN            0     // Aref pin
 #define ARDUINO_13_PIN              29    // Digital pin 13
 #define ARDUINO_12_PIN              28    // Digital pin 12
 #define ARDUINO_11_PIN              25    // Digital pin 11
 #define ARDUINO_10_PIN              24    // Digital pin 10
 #define ARDUINO_9_PIN               23    // Digital pin 9
 #define ARDUINO_8_PIN               20    // Digital pin 8
 
 #define ARDUINO_7_PIN               19    // Digital pin 7
 #define ARDUINO_6_PIN               18    // Digital pin 6
 #define ARDUINO_5_PIN               17    // Digital pin 5
 #define ARDUINO_4_PIN               16    // Digital pin 4
 #define ARDUINO_3_PIN               15    // Digital pin 3
 #define ARDUINO_2_PIN               14    // Digital pin 2
 #define ARDUINO_1_PIN               13    // Digital pin 1
 #define ARDUINO_0_PIN               12    // Digital pin 0
 
 #define ARDUINO_A0_PIN              1     // Analog channel 0
 #define ARDUINO_A1_PIN              2     // Analog channel 1
 #define ARDUINO_A2_PIN              3     // Analog channel 2
 #define ARDUINO_A3_PIN              4     // Analog channel 3
 #define ARDUINO_A4_PIN              5     // Analog channel 4
 #define ARDUINO_A5_PIN              6     // Analog channel 5
 
 
 #ifdef __cplusplus
 }
 #endif
 
 #endif // PCA10028_H
Important Information for this Arm website
