Mistake on this page?
Report an issue in GitHub or email us
pca10100.h
1 /**
2  * Copyright (c) 2019, Nordic Semiconductor ASA
3  *
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without modification,
7  * are permitted provided that the following conditions are met:
8  *
9  * 1. Redistributions of source code must retain the above copyright notice, this
10  * list of conditions and the following disclaimer.
11  *
12  * 2. Redistributions in binary form, except as embedded into a Nordic
13  * Semiconductor ASA integrated circuit in a product or a software update for
14  * such product, must reproduce the above copyright notice, this list of
15  * conditions and the following disclaimer in the documentation and/or other
16  * materials provided with the distribution.
17  *
18  * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
19  * contributors may be used to endorse or promote products derived from this
20  * software without specific prior written permission.
21  *
22  * 4. This software, with or without modification, must only be used with a
23  * Nordic Semiconductor ASA integrated circuit.
24  *
25  * 5. Any software provided in binary form under this license must not be reverse
26  * engineered, decompiled, modified and/or disassembled.
27  *
28  * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
29  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
30  * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
31  * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
32  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
33  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
34  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
36  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
37  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38  *
39  */
40 #ifndef PCA10100_H
41 #define PCA10100_H
42 
43 #ifdef __cplusplus
44 extern "C" {
45 #endif
46 
47 #include "nrf_gpio.h"
48 
49 // LEDs definitions for PCA10056
50 #define LEDS_NUMBER 4
51 
52 #define LED_1 NRF_GPIO_PIN_MAP(0,13)
53 #define LED_2 NRF_GPIO_PIN_MAP(0,14)
54 #define LED_3 NRF_GPIO_PIN_MAP(0,15)
55 #define LED_4 NRF_GPIO_PIN_MAP(0,16)
56 #define LED_START LED_1
57 #define LED_STOP LED_4
58 
59 #define LEDS_ACTIVE_STATE 0
60 
61 #define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 }
62 
63 #define LEDS_INV_MASK LEDS_MASK
64 
65 #define BSP_LED_0 13
66 #define BSP_LED_1 14
67 #define BSP_LED_2 15
68 #define BSP_LED_3 16
69 
70 #define BUTTONS_NUMBER 4
71 
72 #define BUTTON_1 11
73 #define BUTTON_2 12
74 #define BUTTON_3 24
75 #define BUTTON_4 25
76 #define BUTTON_PULL NRF_GPIO_PIN_PULLUP
77 
78 #define BUTTONS_ACTIVE_STATE 0
79 
80 #define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 }
81 
82 #define BSP_BUTTON_0 BUTTON_1
83 #define BSP_BUTTON_1 BUTTON_2
84 #define BSP_BUTTON_2 BUTTON_3
85 #define BSP_BUTTON_3 BUTTON_4
86 
87 #define RX_PIN_NUMBER 8
88 #define TX_PIN_NUMBER 6
89 #define CTS_PIN_NUMBER 7
90 #define RTS_PIN_NUMBER 5
91 #define HWFC true
92 
93 // serialization APPLICATION board - temp. setup for running serialized MEMU tests
94 #define SER_APP_RX_PIN NRF_GPIO_PIN_MAP(1,13) // UART RX pin number.
95 #define SER_APP_TX_PIN NRF_GPIO_PIN_MAP(1,14) // UART TX pin number.
96 #define SER_APP_CTS_PIN NRF_GPIO_PIN_MAP(0,2) // UART Clear To Send pin number.
97 #define SER_APP_RTS_PIN NRF_GPIO_PIN_MAP(1,15) // UART Request To Send pin number.
98 
99 #define SER_APP_SPIM0_SCK_PIN NRF_GPIO_PIN_MAP(0,27) // SPI clock GPIO pin number.
100 #define SER_APP_SPIM0_MOSI_PIN NRF_GPIO_PIN_MAP(0,2) // SPI Master Out Slave In GPIO pin number
101 #define SER_APP_SPIM0_MISO_PIN NRF_GPIO_PIN_MAP(0,26) // SPI Master In Slave Out GPIO pin number
102 #define SER_APP_SPIM0_SS_PIN NRF_GPIO_PIN_MAP(1,13) // SPI Slave Select GPIO pin number
103 #define SER_APP_SPIM0_RDY_PIN NRF_GPIO_PIN_MAP(1,15) // SPI READY GPIO pin number
104 #define SER_APP_SPIM0_REQ_PIN NRF_GPIO_PIN_MAP(1,14) // SPI REQUEST GPIO pin number
105 
106 // serialization CONNECTIVITY board
107 #define SER_CON_RX_PIN NRF_GPIO_PIN_MAP(1,14) // UART RX pin number.
108 #define SER_CON_TX_PIN NRF_GPIO_PIN_MAP(1,13) // UART TX pin number.
109 #define SER_CON_CTS_PIN NRF_GPIO_PIN_MAP(1,15) // UART Clear To Send pin number. Not used if HWFC is set to false.
110 #define SER_CON_RTS_PIN NRF_GPIO_PIN_MAP(0,2) // UART Request To Send pin number. Not used if HWFC is set to false.
111 
112 
113 #define SER_CON_SPIS_SCK_PIN NRF_GPIO_PIN_MAP(0,27) // SPI SCK signal.
114 #define SER_CON_SPIS_MOSI_PIN NRF_GPIO_PIN_MAP(0,2) // SPI MOSI signal.
115 #define SER_CON_SPIS_MISO_PIN NRF_GPIO_PIN_MAP(0,26) // SPI MISO signal.
116 #define SER_CON_SPIS_CSN_PIN NRF_GPIO_PIN_MAP(1,13) // SPI CSN signal.
117 #define SER_CON_SPIS_RDY_PIN NRF_GPIO_PIN_MAP(1,15) // SPI READY GPIO pin number.
118 #define SER_CON_SPIS_REQ_PIN NRF_GPIO_PIN_MAP(1,14) // SPI REQUEST GPIO pin number.
119 
120 #define SER_CONN_CHIP_RESET_PIN NRF_GPIO_PIN_MAP(1,1) // Pin used to reset connectivity chip
121 
122 // Arduino board mappings
123 #define ARDUINO_SCL_PIN 27 // SCL signal pin
124 #define ARDUINO_SDA_PIN 26 // SDA signal pin
125 #define ARDUINO_AREF_PIN 2 // Aref pin
126 
127 #define ARDUINO_13_PIN NRF_GPIO_PIN_MAP(1, 23) // Digital pin 13
128 #define ARDUINO_12_PIN NRF_GPIO_PIN_MAP(1, 22) // Digital pin 12
129 #define ARDUINO_11_PIN NRF_GPIO_PIN_MAP(1, 21) // Digital pin 11
130 #define ARDUINO_10_PIN NRF_GPIO_PIN_MAP(1, 20) // Digital pin 10
131 #define ARDUINO_9_PIN NRF_GPIO_PIN_MAP(1, 19) // Digital pin 9
132 #define ARDUINO_8_PIN NRF_GPIO_PIN_MAP(1, 17) // Digital pin 8
133 
134 #define ARDUINO_7_PIN NRF_GPIO_PIN_MAP(1, 8) // Digital pin 7
135 #define ARDUINO_6_PIN NRF_GPIO_PIN_MAP(1, 7) // Digital pin 6
136 #define ARDUINO_5_PIN NRF_GPIO_PIN_MAP(1, 6) // Digital pin 5
137 #define ARDUINO_4_PIN NRF_GPIO_PIN_MAP(1, 5) // Digital pin 4
138 #define ARDUINO_3_PIN NRF_GPIO_PIN_MAP(1, 4) // Digital pin 3
139 #define ARDUINO_2_PIN NRF_GPIO_PIN_MAP(1, 3) // Digital pin 2
140 #define ARDUINO_1_PIN NRF_GPIO_PIN_MAP(1, 2) // Digital pin 1
141 #define ARDUINO_0_PIN NRF_GPIO_PIN_MAP(1, 1) // Digital pin 0
142 
143 #define ARDUINO_A0_PIN 3 // Analog channel 0
144 #define ARDUINO_A1_PIN 4 // Analog channel 1
145 #define ARDUINO_A2_PIN 28 // Analog channel 2
146 #define ARDUINO_A3_PIN 29 // Analog channel 3
147 #define ARDUINO_A4_PIN 30 // Analog channel 4
148 #define ARDUINO_A5_PIN 31 // Analog channel 5
149 
150 
151 #ifdef __cplusplus
152 }
153 #endif
154 
155 #endif // PCA10100_H
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.