Mistake on this page?
Report an issue in GitHub or email us
Macros
lpc_emac_config.h File Reference

PHY and EMAC configuration file. More...

Go to the source code of this file.

Macros

#define LPC_PHYDEF_PHYADDR   1
 The PHY address connected the to MII/RMII. More...
 
#define PHY_USE_AUTONEG   1
 Enable autonegotiation mode. More...
 
#define PHY_USE_FULL_DUPLEX   1
 Sets up the PHY interface to either full duplex operation or half duplex operation if PHY_USE_AUTONEG is not enabled. More...
 
#define PHY_USE_100MBS   1
 Sets up the PHY interface to either 100MBS operation or 10MBS operation if PHY_USE_AUTONEG is not enabled. More...
 
#define LPC_EMAC_RMII   1
 Selects RMII or MII connection type in the EMAC peripheral. More...
 
#define LPC_NUM_BUFF_RXDESCS   4
 Defines the number of descriptors used for RX. More...
 
#define LPC_NUM_BUFF_TXDESCS   9
 Defines the number of descriptors used for TX. More...
 
#define LPC_TX_PBUF_BOUNCE_EN   1
 Set this define to 1 to enable bounce buffers for transmit memory buffers that cannot be sent via the zero-copy method. More...
 

Detailed Description

PHY and EMAC configuration file.

Version
1.0
Date
20 Nov. 2011
Author
NXP MCU SW Application Team

Copyright(C) 2011, NXP Semiconductor All rights reserved.

Software that is described herein is for illustrative purposes only which provides customers with programming information regarding the products. This software is supplied "AS IS" without any warranties. NXP Semiconductors assumes no responsibility or liability for the use of the software, conveys no license or title under any patent, copyright, or mask work right to the product. NXP Semiconductors reserves the right to make changes in the software without notification. NXP Semiconductors also make no representation or warranty that such application will be suitable for the specified use without further testing or modification.

Definition in file lpc_emac_config.h.

Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.