Inheritance diagram for GreenteaSerial:

Public Member Functions
int	putc (int c)
	Write a char to the serial port. More...

int	getc ()
	Read a char from the serial port. More...

int	puts (const char *str)
	Write a string to the serial port. More...

void	baud (int baudrate)
	Set the baud rate of the serial port. More...

void	format (int bits=8, Parity parity=SerialBase::None, int stop_bits=1)
	Set the transmission format used by the serial port. More...

int	readable ()
	Determine if there is a character available to read. More...

int	writeable ()
	Determine if there is space available to write a character. More...

void	attach (Callback< void()> func, IrqType type=RxIrq)
	Attach a function to call whenever a serial interrupt is generated. More...

template<typename T >
void	attach (T obj, void(T::method)(), IrqType type=RxIrq)
	Attach a member function to call whenever a serial interrupt is generated. More...

template<typename T >
void	attach (T obj, void(method)(T *), IrqType type=RxIrq)
	Attach a member function to call whenever a serial interrupt is generated. More...

void	set_break ()
	Generate a break condition on the serial line NOTE: Clear break needs to run at least one frame after set_break is called. More...

void	clear_break ()
	Clear a break condition on the serial line NOTE: Should be run at least one frame after set_break is called. More...

void	send_break ()
	Generate a break condition on the serial line. More...

void	set_flow_control (Flow type, PinName flow1=NC, PinName flow2=NC)
	Set the flow control type on the serial port. More...

int	write (const uint8_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_TX_COMPLETE)
	Begin asynchronous write using 8bit buffer. More...

int	write (const uint16_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_TX_COMPLETE)
	Begin asynchronous write using 16bit buffer. More...

void	abort_write ()
	Abort the on-going write transfer. More...

int	read (uint8_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_RX_COMPLETE, unsigned char char_match=SERIAL_RESERVED_CHAR_MATCH)
	Begin asynchronous reading using 8bit buffer. More...

int	read (uint16_t *buffer, int length, const event_callback_t &callback, int event=SERIAL_EVENT_RX_COMPLETE, unsigned char char_match=SERIAL_RESERVED_CHAR_MATCH)
	Begin asynchronous reading using 16bit buffer. More...

void	abort_read ()
	Abort the on-going read transfer. More...

int	set_dma_usage_tx (DMAUsage usage)
	Configure DMA usage suggestion for non-blocking TX transfers. More...

int	set_dma_usage_rx (DMAUsage usage)
	Configure DMA usage suggestion for non-blocking RX transfers. More...

Detailed Description

Definition at line 10 of file greentea_serial.h.

Member Function Documentation

void abort_read ( )

inherited

Abort the on-going read transfer.

It is safe to call abort_read() when there is no on-going transaction.

void abort_write ( )

inherited

Abort the on-going write transfer.

It is safe to call abort_write() when there is no on-going transaction.

void attach	(	Callback< void()>	func,
		IrqType	type = `RxIrq`
	)

inherited

Attach a function to call whenever a serial interrupt is generated.

Parameters

func	A pointer to a void function, or 0 to set as none
type	Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)

void attach	(	T *	obj,
		void(T::*)()	method,
		IrqType	type = `RxIrq`
	)

inherited

Attach a member function to call whenever a serial interrupt is generated.

Parameters

obj	pointer to the object to call the member function on
method	pointer to the member function to be called
type	Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)

Deprecated:: The attach function does not support cv-qualifiers. Replaced by attach(callback(obj, method), type).

Definition at line 118 of file SerialBase.h.

void attach	(	T *	obj,
		void()(T )	method,
		IrqType	type = `RxIrq`
	)

inherited

Attach a member function to call whenever a serial interrupt is generated.

Parameters

obj	pointer to the object to call the member function on
method	pointer to the member function to be called
type	Which serial interrupt to attach the member function to (Serial::RxIrq for receive, TxIrq for transmit buffer empty)

Deprecated:: The attach function does not support cv-qualifiers. Replaced by attach(callback(obj, method), type).

Definition at line 136 of file SerialBase.h.

void baud ( int baudrate )

inherited

Set the baud rate of the serial port.

Parameters

baudrate The baudrate of the serial port (default = 9600).

void clear_break ( )

inherited

Clear a break condition on the serial line NOTE: Should be run at least one frame after set_break is called.

void format	(	int	bits = `8`,
		Parity	parity = `SerialBase::None`,
		int	stop_bits = `1`
	)

inherited

Set the transmission format used by the serial port.

Parameters

bits	The number of bits in a word (5-8; default = 8)
parity	The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
stop_bits	The number of stop bits (1 or 2; default = 1)

int getc ( )

inherited

Read a char from the serial port.

Returns: The char read from the serial port

int putc ( int c )

inherited

Write a char to the serial port.

Parameters

c	The char to write

Returns: The written char or -1 if an error occurred

int puts ( const char * str )

inherited

Write a string to the serial port.

Parameters

str	The string to write

Returns: 0 if the write succeeds, EOF for error

int read	(	uint8_t *	buffer,
		int	length,
		const event_callback_t &	callback,
		int	event = `SERIAL_EVENT_RX_COMPLETE`,
		unsigned char	char_match = `SERIAL_RESERVED_CHAR_MATCH`
	)

inherited

Begin asynchronous reading using 8bit buffer.

The read operation ends with any of the enabled events and invokes registered callback function (which can be NULL to not receive callback at all). Events that are not enabled by event argument are simply ignored. Operation has to be ended explicitly by calling abort_read() when no events are enabled. This function locks the deep sleep until any event has occurred.

Parameters

buffer	The buffer where received data will be stored
length	The buffer length in bytes
callback	The event callback function
event	The logical OR of RX events that should end operation
char_match	The matching character

Returns: Zero if new transaction was started, -1 if transaction is already on-going

int read	(	uint16_t *	buffer,
		int	length,
		const event_callback_t &	callback,
		int	event = `SERIAL_EVENT_RX_COMPLETE`,
		unsigned char	char_match = `SERIAL_RESERVED_CHAR_MATCH`
	)

inherited

Begin asynchronous reading using 16bit buffer.

The read operation ends with any of the enabled events and invokes registered callback function (which can be NULL to not receive callback at all). Events that are not enabled by event argument are simply ignored. Operation has to be ended explicitly by calling abort_read() when no events are enabled. This function locks the deep sleep until any event has occurred.

Parameters

buffer	The buffer where received data will be stored
length	The buffer length in bytes
callback	The event callback function
event	The logical OR of RX events that should end operation
char_match	The matching character

Returns: Zero if new transaction was started, -1 if transaction is already on-going

int readable ( )

inherited

Determine if there is a character available to read.

Returns: 1 if there is a character available to read, 0 otherwise

void send_break ( )

inherited

Generate a break condition on the serial line.

void set_break ( )

inherited

Generate a break condition on the serial line NOTE: Clear break needs to run at least one frame after set_break is called.

int set_dma_usage_rx ( DMAUsage usage )

inherited

Configure DMA usage suggestion for non-blocking RX transfers.

Parameters

usage The usage DMA hint for peripheral

Returns: Zero if the usage was set, -1 if a transaction is on-going

int set_dma_usage_tx ( DMAUsage usage )

inherited

Configure DMA usage suggestion for non-blocking TX transfers.

Parameters

usage The usage DMA hint for peripheral

Returns: Zero if the usage was set, -1 if a transaction is on-going

void set_flow_control	(	Flow	type,
		PinName	flow1 = `NC`,
		PinName	flow2 = `NC`
	)

inherited

Set the flow control type on the serial port.

Parameters

type	the flow control type (Disabled, RTS, CTS, RTSCTS)
flow1	the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
flow2	the second flow control pin (CTS for RTSCTS)

int write	(	const uint8_t *	buffer,
		int	length,
		const event_callback_t &	callback,
		int	event = `SERIAL_EVENT_TX_COMPLETE`
	)

inherited

Begin asynchronous write using 8bit buffer.

The write operation ends with any of the enabled events and invokes registered callback function (which can be NULL to not receive callback at all). Events that are not enabled by event argument are simply ignored. Operation has to be ended explicitly by calling abort_write() when no events are enabled. This function locks the deep sleep until any event has occurred.

Parameters

buffer	The buffer where received data will be stored
length	The buffer length in bytes
callback	The event callback function
event	The logical OR of TX events that should end operation

Returns: Zero if new transaction was started, -1 if transaction is already on-going

int write	(	const uint16_t *	buffer,
		int	length,
		const event_callback_t &	callback,
		int	event = `SERIAL_EVENT_TX_COMPLETE`
	)

inherited

Begin asynchronous write using 16bit buffer.

The write operation ends with any of the enabled events and invokes registered callback function (which can be NULL to not receive callback at all). Events that are not enabled by event argument are simply ignored. Operation has to be ended explicitly by calling abort_write() when no events are enabled. This function locks the deep sleep until any event has occurred.

Parameters

buffer	The buffer where received data will be stored
length	The buffer length in bytes
callback	The event callback function
event	The logical OR of TX events that should end operation

Returns: Zero if new transaction was started, -1 if transaction is already on-going

int writeable ( )

inherited

Determine if there is space available to write a character.

Returns: 1 if there is space to write a character, 0 otherwise

Public Member Functions

Detailed Description

Member Function Documentation

Important Information for this Arm website