Mistake on this page?
Report an issue in GitHub or email us
MX25L51245G_config.h
1 /* mbed Microcontroller Library
2  * Copyright (c) 2018-2018 ARM Limited
3  *
4  * Licensed under the Apache License, Version 2.0 (the "License");
5  * you may not use this file except in compliance with the License.
6  * You may obtain a copy of the License at
7  *
8  * http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16 #ifndef MBED_QSPI_FLASH_MX25L51245G_H
17 #define MBED_QSPI_FLASH_MX25L51245G_H
18 
19 
20 #define QSPI_FLASH_CHIP_STRING "macronix MX25L51245G"
21 
22 // Command for reading status register
23 #define QSPI_CMD_RDSR 0x05
24 // Command for reading configuration register
25 #define QSPI_CMD_RDCR0 0x15
26 // Command for writing status/configuration register
27 #define QSPI_CMD_WRSR 0x01
28 // Command for reading security register
29 #define QSPI_CMD_RDSCUR 0x2B
30 
31 // Command for setting Reset Enable
32 #define QSPI_CMD_RSTEN 0x66
33 // Command for setting Reset
34 #define QSPI_CMD_RST 0x99
35 
36 // Command for setting write enable
37 #define QSPI_CMD_WREN 0x06
38 // Command for setting write disable
39 #define QSPI_CMD_WRDI 0x04
40 
41 // WRSR operations max time [us] (datasheet max time + 15%)
42 #define QSPI_WRSR_MAX_TIME 34500 // 30ms
43 // general wait max time [us]
44 #define QSPI_WAIT_MAX_TIME 100000 // 100ms
45 
46 
47 // Commands for writing (page programming)
48 #define QSPI_CMD_WRITE_1IO 0x02 // 1-1-1 mode
49 #define QSPI_CMD_WRITE_4IO 0x38 // 1-4-4 mode
50 
51 // write operations max time [us] (datasheet max time + 15%)
52 #define QSPI_PAGE_PROG_MAX_TIME 11500 // 10ms
53 
54 #define QSPI_PAGE_SIZE 256 // 256B
55 #define QSPI_SECTOR_SIZE 4096 // 4kB
56 #define QSPI_SECTOR_COUNT 2048 //
57 
58 // Commands for reading
59 #define QSPI_CMD_READ_1IO_FAST 0x0B // 1-1-1 mode
60 #define QSPI_CMD_READ_1IO 0x03 // 1-1-1 mode
61 #define QSPI_CMD_READ_2IO 0xBB // 1-2-2 mode
62 #define QSPI_CMD_READ_1I2O 0x3B // 1-1-2 mode
63 #define QSPI_CMD_READ_4IO 0xEB // 1-4-4 mode
64 #define QSPI_CMD_READ_1I4O 0x6B // 1-1-4 mode
65 
66 #define QSPI_READ_1IO_DUMMY_CYCLE 0
67 #define QSPI_READ_FAST_DUMMY_CYCLE 8
68 #define QSPI_READ_2IO_DUMMY_CYCLE 4
69 #define QSPI_READ_1I2O_DUMMY_CYCLE 8
70 #define QSPI_READ_4IO_DUMMY_CYCLE 6
71 #define QSPI_READ_1I4O_DUMMY_CYCLE 8
72 
73 // Commands for erasing
74 #define QSPI_CMD_ERASE_SECTOR 0x20 // 4kB
75 #define QSPI_CMD_ERASE_BLOCK_32 0x52 // 32kB
76 #define QSPI_CMD_ERASE_BLOCK_64 0xD8 // 64kB
77 #define QSPI_CMD_ERASE_CHIP 0x60 // or 0xC7
78 
79 // erase operations max time [us] (datasheet max time + 15%)
80 #define QSPI_ERASE_SECTOR_MAX_TIME 480000 // 400 ms
81 #define QSPI_ERASE_BLOCK_32_MAX_TIME 1200000 // 1s
82 #define QSPI_ERASE_BLOCK_64_MAX_TIME 2400000 // 2s
83 
84 // max frequency for basic rw operation (for fast mode)
85 #define QSPI_COMMON_MAX_FREQUENCY 32000000
86 
87 #define QSPI_STATUS_REG_SIZE 1
88 #define QSPI_CONFIG_REG_0_SIZE 2
89 #define QSPI_SECURITY_REG_SIZE 1
90 #define QSPI_MAX_REG_SIZE 2
91 
92 // status register
93 #define STATUS_BIT_WIP (1 << 0) // write in progress bit
94 #define STATUS_BIT_WEL (1 << 1) // write enable latch
95 #define STATUS_BIT_BP0 (1 << 2) //
96 #define STATUS_BIT_BP1 (1 << 3) //
97 #define STATUS_BIT_BP2 (1 << 4) //
98 #define STATUS_BIT_BP3 (1 << 5) //
99 #define STATUS_BIT_QE (1 << 6) // Quad Enable
100 #define STATUS_BIT_SRWD (1 << 7) // status register write protect
101 
102 // configuration register 0
103 // bit 0, 1, 2, 4, 5, 7 reserved
104 #define CONFIG0_BIT_TB (1 << 3) // Top/Bottom area protect
105 
106 #endif // MBED_QSPI_FLASH_MX25L51245G_H
Important Information for this Arm website

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies. If you are not happy with the use of these cookies, please review our Cookie Policy to learn how they can be disabled. By disabling cookies, some features of the site will not work.