another clone of servo library
Diff: Servo.h
- Revision:
- 0:c24d2ead5c71
diff -r 000000000000 -r c24d2ead5c71 Servo.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Servo.h Thu Jan 09 19:18:56 2020 +0000 @@ -0,0 +1,100 @@ +/* mbed R/C Servo Library + * Copyright (c) 2007-2010 sford, cstyles + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MBED_SERVO_H +#define MBED_SERVO_H + +#include "mbed.h" + +/** Servo control class, based on a PwmOut + * + * Example: + * @code + * // Continuously sweep the servo through it's full range + * #include "mbed.h" + * #include "Servo.h" + * + * Servo myservo(p21); + * + * int main() { + * while(1) { + * for(int i=0; i<100; i++) { + * myservo = i/100.0; + * wait(0.01); + * } + * for(int i=100; i>0; i--) { + * myservo = i/100.0; + * wait(0.01); + * } + * } + * } + * @endcode + */ +class Servo { + +public: + /** Create a servo object connected to the specified PwmOut pin + * + * @param pin PwmOut pin to connect to + */ + Servo(PinName pin); + + /** Set the servo position, normalised to it's full range + * + * @param percent A normalised number 0.0-1.0 to represent the full range. + */ + void write(float percent); + + /** Read the servo motors current position + * + * @param returns A normalised number 0.0-1.0 representing the full range. + */ + float read(); + + /** Set the servo position + * + * @param degrees Servo position in degrees + */ + void position(float degrees); + + /** Allows calibration of the range and angles for a particular servo + * + * @param range Pulsewidth range from center (1.5ms) to maximum/minimum position in seconds + * @param degrees Angle from centre to maximum/minimum position in degrees + */ + void calibrate(float range = 0.0005, float degrees = 180.0); + + /** Shorthand for the write and read functions */ + Servo& operator= (float percent); + Servo& operator= (Servo& rhs); + operator float(); + +protected: + PwmOut _pwm; + float _range; + float _degrees; + float _p; +}; + +#endif + +