Taguchi Yuuki
IAP class library for LPC1768, LPC11U24, LPC1114, LPC1347, LPC1549, LPC812 and LPC824
Fork of
IAP
by 
Tedd OKANO
IAP.h
- Committer:
- yuhki50
- Date:
- 2016-05-03
- Revision:
- 10:56f1e488b250
- Parent:
- 9:f33e8f9a3677
File content as of revision 10:56f1e488b250:
/** IAP : internal Flash memory access library
*
* The internal Flash memory access is described in the LPC1768 and LPC11U24 usermanual.
* http://www.nxp.com/documents/user_manual/UM10360.pdf
* http://www.nxp.com/documents/user_manual/UM10462.pdf
*
* LPC1768 --
* Chapter 2: "LPC17xx Memory map"
* Chapter 32: "LPC17xx Flash memory interface and programming"
* refering Rev. 01 - 4 January 2010
*
* LPC11U24 --
* Chapter 2: "LPC11Uxx Memory mapping"
* Chapter 20: "LPC11Uxx Flash programming firmware"
* refering Rev. 03 - 16 July 2012
*
* Released under the MIT License: http://mbed.org/license/mit
*
* revision 1.0 09-Mar-2010 1st release
* revision 1.1 12-Mar-2010 chaged: to make possible to reserve flash area for user
* it can be set by USER_FLASH_AREA_START and USER_FLASH_AREA_SIZE in IAP.h
* revision 2.0 26-Nov-2012 LPC11U24 code added
* revision 2.1 26-Nov-2012 EEPROM access code imported from Suga koubou san's (http://mbed.org/users/okini3939/) library
* http://mbed.org/users/okini3939/code/M0_EEPROM_test/
* revision 3.0 09-Jan-2015 LPC812 and LPC824 support added
* revision 3.1 13-Jan-2015 LPC1114 support added
* revision 3.1.1 16-Jan-2015 Target MCU name changed for better compatibility across the platforms
*/
#ifndef MBED_IAP
#define MBED_IAP
#include "mbed.h"
#if defined(TARGET_LPC176X)
#define USER_FLASH_AREA_START FLASH_SECTOR_29
#define USER_FLASH_AREA_SIZE (FLASH_SECTOR_SIZE_16_TO_29 * 1)
/*
* memory map information is available in next URL also.
* http://mbed.org/projects/libraries/svn/mbed/trunk/LPC1768/LPC17xx.h
*/
/** Table for start adress of sectors
*
* LPC1768 internal flash memory sector numbers and addresses
*
* LPC1768 flash memory are and sector number/size
* Table 568 "Sectors in a LPC17xx device", Section 5. "Sector numbers", usermanual
*
* 0x00000000 - 0x0007FFFF flash (29 sectors)
*
* Sector0: 0x00000000 - 0x00000FFF 4K
* Sector1: 0x00001000 - 0x00001FFF 4K
* Sector2: 0x00002000 - 0x00002FFF 4K
* Sector3: 0x00003000 - 0x00003FFF 4K
* Sector4: 0x00004000 - 0x00004FFF 4K
* Sector5: 0x00005000 - 0x00005FFF 4K
* Sector6: 0x00006000 - 0x00006FFF 4K
* Sector7: 0x00007000 - 0x00007FFF 4K
* Sector8: 0x00008000 - 0x00008FFF 4K
* Sector9: 0x00009000 - 0x00009FFF 4K
* Sector10: 0x0000A000 - 0x0000AFFF 4K
* Sector11: 0x0000B000 - 0x0000BFFF 4K
* Sector12: 0x0000C000 - 0x0000CFFF 4K
* Sector13: 0x0000D000 - 0x0000DFFF 4K
* Sector14: 0x0000E000 - 0x0000EFFF 4K
* Sector15: 0x0000F000 - 0x0000FFFF 4K
*
* Sector16: 0x00010000 - 0x00017FFF 32K
* Sector17: 0x00018000 - 0x0001FFFF 32K
* Sector18: 0x00020000 - 0x00027FFF 32K
* Sector19: 0x00028000 - 0x0002FFFF 32K
* Sector20: 0x00030000 - 0x00037FFF 32K
* Sector21: 0x00038000 - 0x0003FFFF 32K
* Sector22: 0x00040000 - 0x00047FFF 32K
* Sector23: 0x00048000 - 0x0004FFFF 32K
* Sector24: 0x00050000 - 0x00057FFF 32K
* Sector25: 0x00058000 - 0x0005FFFF 32K
* Sector26: 0x00060000 - 0x00067FFF 32K
* Sector27: 0x00068000 - 0x0006FFFF 32K
* Sector28: 0x00070000 - 0x00077FFF 32K
* Sector29: 0x00078000 - 0x0007FFFF 32K
*/
#define FLASH_SECTOR_0 0x00000000
#define FLASH_SECTOR_1 0x00001000
#define FLASH_SECTOR_2 0x00002000
#define FLASH_SECTOR_3 0x00003000
#define FLASH_SECTOR_4 0x00004000
#define FLASH_SECTOR_5 0x00005000
#define FLASH_SECTOR_6 0x00006000
#define FLASH_SECTOR_7 0x00007000
#define FLASH_SECTOR_8 0x00008000
#define FLASH_SECTOR_9 0x00009000
#define FLASH_SECTOR_10 0x0000A000
#define FLASH_SECTOR_11 0x0000B000
#define FLASH_SECTOR_12 0x0000C000
#define FLASH_SECTOR_13 0x0000D000
#define FLASH_SECTOR_14 0x0000E000
#define FLASH_SECTOR_15 0x0000F000
#define FLASH_SECTOR_16 0x00010000
#define FLASH_SECTOR_17 0x00018000
#define FLASH_SECTOR_18 0x00020000
#define FLASH_SECTOR_19 0x00028000
#define FLASH_SECTOR_20 0x00030000
#define FLASH_SECTOR_21 0x00038000
#define FLASH_SECTOR_22 0x00040000
#define FLASH_SECTOR_23 0x00048000
#define FLASH_SECTOR_24 0x00050000
#define FLASH_SECTOR_25 0x00058000
#define FLASH_SECTOR_26 0x00060000
#define FLASH_SECTOR_27 0x00068000
#define FLASH_SECTOR_28 0x00070000
#define FLASH_SECTOR_29 0x00078000
#define FLASH_SECTOR_SIZE_0_TO_15 ( 4 * 1024)
#define FLASH_SECTOR_SIZE_16_TO_29 (32 * 1024)
static char * sector_start_adress[] = {
(char *)FLASH_SECTOR_0,
(char *)FLASH_SECTOR_1,
(char *)FLASH_SECTOR_2,
(char *)FLASH_SECTOR_3,
(char *)FLASH_SECTOR_4,
(char *)FLASH_SECTOR_5,
(char *)FLASH_SECTOR_6,
(char *)FLASH_SECTOR_7,
(char *)FLASH_SECTOR_8,
(char *)FLASH_SECTOR_9,
(char *)FLASH_SECTOR_10,
(char *)FLASH_SECTOR_11,
(char *)FLASH_SECTOR_12,
(char *)FLASH_SECTOR_13,
(char *)FLASH_SECTOR_14,
(char *)FLASH_SECTOR_15,
(char *)FLASH_SECTOR_16,
(char *)FLASH_SECTOR_17,
(char *)FLASH_SECTOR_18,
(char *)FLASH_SECTOR_19,
(char *)FLASH_SECTOR_20,
(char *)FLASH_SECTOR_21,
(char *)FLASH_SECTOR_22,
(char *)FLASH_SECTOR_23,
(char *)FLASH_SECTOR_24,
(char *)FLASH_SECTOR_25,
(char *)FLASH_SECTOR_26,
(char *)FLASH_SECTOR_27,
(char *)FLASH_SECTOR_28,
(char *)FLASH_SECTOR_29
};
#elif defined(TARGET_LPC11UXX) || defined(TARGET_LPC11XX) || defined(TARGET_LPC13XX) || defined(TARGET_LPC15XX)
#define USER_FLASH_AREA_START FLASH_SECTOR_7
#define USER_FLASH_AREA_SIZE (FLASH_SECTOR_SIZE * 1)
/** Table for start adress of sectors
*
* LPC11U24 internal flash memory sector numbers and addresses
*
* LPC11U24 flash memory are and sector number/size
* Table 334 "LPC11U1x/2x flash sectors", Section 20. "Sector numbers", usermanual
*
* 0x00000000 - 0x00007FFF flash (8 sectors)
*
* Sector0: 0x00000000 - 0x00000FFF 4K
* Sector1: 0x00001000 - 0x00001FFF 4K
* Sector2: 0x00002000 - 0x00002FFF 4K
* Sector3: 0x00003000 - 0x00003FFF 4K
* Sector4: 0x00004000 - 0x00004FFF 4K
* Sector5: 0x00005000 - 0x00005FFF 4K
* Sector6: 0x00006000 - 0x00006FFF 4K
* Sector7: 0x00007000 - 0x00007FFF 4K
*/
#define FLASH_SECTOR_0 0x00000000
#define FLASH_SECTOR_1 0x00001000
#define FLASH_SECTOR_2 0x00002000
#define FLASH_SECTOR_3 0x00003000
#define FLASH_SECTOR_4 0x00004000
#define FLASH_SECTOR_5 0x00005000
#define FLASH_SECTOR_6 0x00006000
#define FLASH_SECTOR_7 0x00007000
#define FLASH_SECTOR_SIZE (4 * 1024)
static char * sector_start_adress[] = {
(char *)FLASH_SECTOR_0,
(char *)FLASH_SECTOR_1,
(char *)FLASH_SECTOR_2,
(char *)FLASH_SECTOR_3,
(char *)FLASH_SECTOR_4,
(char *)FLASH_SECTOR_5,
(char *)FLASH_SECTOR_6,
(char *)FLASH_SECTOR_7,
};
#elif defined(TARGET_LPC81X) || defined(TARGET_LPC82X)
#define USER_FLASH_AREA_START FLASH_SECTOR_15
#define USER_FLASH_AREA_SIZE (FLASH_SECTOR_SIZE * 1)
/** Table for start adress of sectors
*
* LPC812/LPC824 internal flash memory sector numbers and addresses
*
* 0x00000000 - 0x00003FFF flash (16 sectors for LPC812)
* 0x00000000 - 0x00007FFF flash (32 sectors for LPC824)
*
* Sector0: 0x00000000 - 0x000003FF 1K
* Sector1: 0x00000400 - 0x000007FF 1K
* Sector2: 0x00000800 - 0x00000BFF 1K
* Sector3: 0x00000C00 - 0x00000FFF 1K
* Sector4: 0x00001000 - 0x000013FF 1K
* Sector5: 0x00001400 - 0x000017FF 1K
* Sector6: 0x00001800 - 0x00001BFF 1K
* Sector7: 0x00001C00 - 0x00001FFF 1K
* Sector8: 0x00002000 - 0x000023FF 1K
* Sector9: 0x00002400 - 0x000027FF 1K
* Sector10: 0x00002800 - 0x00002BFF 1K
* Sector11: 0x00002C00 - 0x00002FFF 1K
* Sector12: 0x00003000 - 0x000033FF 1K
* Sector13: 0x00003400 - 0x000037FF 1K
* Sector14: 0x00003800 - 0x00003BFF 1K
* Sector15: 0x00003C00 - 0x00003FFF 1K
* Sector16: 0x00004000 - 0x000043FF 1K (LPC824 only)
* Sector17: 0x00004400 - 0x000047FF 1K (LPC824 only)
* Sector18: 0x00004800 - 0x00004BFF 1K (LPC824 only)
* Sector19: 0x00004C00 - 0x00004FFF 1K (LPC824 only)
* Sector20: 0x00005000 - 0x000053FF 1K (LPC824 only)
* Sector21: 0x00005400 - 0x000057FF 1K (LPC824 only)
* Sector22: 0x00005800 - 0x00005BFF 1K (LPC824 only)
* Sector23: 0x00005C00 - 0x00005FFF 1K (LPC824 only)
* Sector24: 0x00006000 - 0x000063FF 1K (LPC824 only)
* Sector25: 0x00006400 - 0x000067FF 1K (LPC824 only)
* Sector26: 0x00006800 - 0x00006BFF 1K (LPC824 only)
* Sector27: 0x00006C00 - 0x00006FFF 1K (LPC824 only)
* Sector28: 0x00007000 - 0x000073FF 1K (LPC824 only)
* Sector29: 0x00007400 - 0x000077FF 1K (LPC824 only)
* Sector30: 0x00007800 - 0x00007BFF 1K (LPC824 only)
* Sector31: 0x00007C00 - 0x00007FFF 1K (LPC824 only)
*/
#define FLASH_SECTOR_0 0x00000000
#define FLASH_SECTOR_1 0x00000400
#define FLASH_SECTOR_2 0x00000800
#define FLASH_SECTOR_3 0x00000C00
#define FLASH_SECTOR_4 0x00001000
#define FLASH_SECTOR_5 0x00001400
#define FLASH_SECTOR_6 0x00001800
#define FLASH_SECTOR_7 0x00001C00
#define FLASH_SECTOR_8 0x00002000
#define FLASH_SECTOR_9 0x00002400
#define FLASH_SECTOR_10 0x00002800
#define FLASH_SECTOR_11 0x00002C00
#define FLASH_SECTOR_12 0x00003000
#define FLASH_SECTOR_13 0x00003400
#define FLASH_SECTOR_14 0x00003800
#define FLASH_SECTOR_15 0x00003C00
#define FLASH_SECTOR_16 0x00004000 // for LPC824 only
#define FLASH_SECTOR_17 0x00004400 // for LPC824 only
#define FLASH_SECTOR_18 0x00004800 // for LPC824 only
#define FLASH_SECTOR_19 0x00004C00 // for LPC824 only
#define FLASH_SECTOR_20 0x00005000 // for LPC824 only
#define FLASH_SECTOR_21 0x00005400 // for LPC824 only
#define FLASH_SECTOR_22 0x00005800 // for LPC824 only
#define FLASH_SECTOR_23 0x00005C00 // for LPC824 only
#define FLASH_SECTOR_24 0x00006000 // for LPC824 only
#define FLASH_SECTOR_25 0x00006400 // for LPC824 only
#define FLASH_SECTOR_26 0x00006800 // for LPC824 only
#define FLASH_SECTOR_27 0x00006C00 // for LPC824 only
#define FLASH_SECTOR_28 0x00007000 // for LPC824 only
#define FLASH_SECTOR_29 0x00007400 // for LPC824 only
#define FLASH_SECTOR_30 0x00007800 // for LPC824 only
#define FLASH_SECTOR_31 0x00007C00 // for LPC824 only
#define FLASH_SECTOR_SIZE (1 * 1024)
static char * sector_start_adress[] = {
(char *)FLASH_SECTOR_0,
(char *)FLASH_SECTOR_1,
(char *)FLASH_SECTOR_2,
(char *)FLASH_SECTOR_3,
(char *)FLASH_SECTOR_4,
(char *)FLASH_SECTOR_5,
(char *)FLASH_SECTOR_6,
(char *)FLASH_SECTOR_7,
(char *)FLASH_SECTOR_8,
(char *)FLASH_SECTOR_9,
(char *)FLASH_SECTOR_10,
(char *)FLASH_SECTOR_11,
(char *)FLASH_SECTOR_12,
(char *)FLASH_SECTOR_13,
(char *)FLASH_SECTOR_14,
(char *)FLASH_SECTOR_15,
(char *)FLASH_SECTOR_16, // for LPC824 only
(char *)FLASH_SECTOR_17, // for LPC824 only
(char *)FLASH_SECTOR_18, // for LPC824 only
(char *)FLASH_SECTOR_19, // for LPC824 only
(char *)FLASH_SECTOR_20, // for LPC824 only
(char *)FLASH_SECTOR_21, // for LPC824 only
(char *)FLASH_SECTOR_22, // for LPC824 only
(char *)FLASH_SECTOR_23, // for LPC824 only
(char *)FLASH_SECTOR_24, // for LPC824 only
(char *)FLASH_SECTOR_25, // for LPC824 only
(char *)FLASH_SECTOR_26, // for LPC824 only
(char *)FLASH_SECTOR_27, // for LPC824 only
(char *)FLASH_SECTOR_28, // for LPC824 only
(char *)FLASH_SECTOR_29, // for LPC824 only
(char *)FLASH_SECTOR_30, // for LPC824 only
(char *)FLASH_SECTOR_31 // for LPC824 only
};
#endif
/** Error code by IAP routine
*
* Table 588 "ISP Return Codes Summary", Section 7.15 "ISP Return Codes", usermanual
*/
enum error_code {
CMD_SUCCESS,
INVALID_COMMAND,
SRC_ADDR_ERROR,
DST_ADDR_ERROR,
SRC_ADDR_NOT_MAPPED,
DST_ADDR_NOT_MAPPED,
COUNT_ERROR,
INVALID_SECTOR,
SECTOR_NOT_BLANK,
SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION,
COMPARE_ERROR,
BUSY,
PARAM_ERROR,
ADDR_ERROR,
ADDR_NOT_MAPPED,
CMD_LOCKED,
INVALID_CODE,
INVALID_BAUD_RATE,
INVALID_STOP_BIT,
CODE_READ_PROTECTION_ENABLED
};
/*
* IAP routine entry
*
* "IAP commands"
*/
#if defined(TARGET_LPC11UXX) || defined(TARGET_LPC13XX) || defined(TARGET_LPC81X) || defined(TARGET_LPC82X)
#define IAP_LOCATION 0x1fff1ff1
#elif defined(TARGET_LPC15XX)
#define IAP_LOCATION 0x3000205UL
#endif
typedef void (*IAP_call)(unsigned int [], unsigned int []);
/** IAP class
*
* Interface for internal flash memory access
*/
class IAP
{
public:
/** Constructor for IAP
*
*/
IAP() : iap_entry( reinterpret_cast<IAP_call>(IAP_LOCATION) ), cclk_kHz( SystemCoreClock / 1000 ) {}
/** Reinvoke ISP
*
* @return error code
*/
int reinvoke_isp( void );
/** Read part identification number
*
* @return device ID
* @see read_serial()
*/
int read_ID( void );
/** Read device serial number
*
* @return device serial number
* @see read_ID()
*/
int *read_serial( void );
/** Blank check sector(s)
*
* @param start a Start Sector Number
* @param end an End Sector Number (should be greater than or equal to start sector number).
* @return error code: CMD_SUCCESS | BUSY | SECTOR_NOT_BLANK | INVALID_SECTOR
*/
int blank_check( int start, int end );
/** Erase Sector(s)
*
* @param start a Start Sector Number
* @param end an End Sector Number (should be greater than or equal to start sector number).
* @return error code: CMD_SUCCESS | BUSY | SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION | INVALID_SECTOR
*/
int erase( int start, int end );
/** Prepare sector(s) for write operation
*
* @param start a Start Sector Number
* @param end an End Sector Number (should be greater than or equal to start sector number).
* @return error code: CMD_SUCCESS | BUSY | INVALID_SECTOR
*/
int prepare( int start, int end );
/** Copy RAM to Flash
*
* @param source_addr Source RAM address from which data bytes are to be read. This address should be a word boundary.
* @param target_addr Destination flash address where data bytes are to be written. This address should be a 256 byte boundary.
* @param size Number of bytes to be written. Should be 256 | 512 | 1024 | 4096.
* @return error code: CMD_SUCCESS | SRC_ADDR_ERROR (Address not a word boundary) | DST_ADDR_ERROR (Address not on correct boundary) | SRC_ADDR_NOT_MAPPED | DST_ADDR_NOT_MAPPED | COUNT_ERROR (Byte count is not 256 | 512 | 1024 | 4096) | SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION | BUSY
*/
int write( char *source_addr, char *target_addr, int size );
/** Compare <address1> <address2> <no of bytes>
*
* @param source_addr Starting flash or RAM address of data bytes to be compared. This address should be a word boundary.
* @param target_addr Starting flash or RAM address of data bytes to be compared. This address should be a word boundary.
* @param size Number of bytes to be compared; should be a multiple of 4.
* @return error code: CMD_SUCCESS | COMPARE_ERROR | COUNT_ERROR (Byte count is not a multiple of 4) | ADDR_ERROR | ADDR_NOT_MAPPED
*/
int compare( char *source_addr, char *target_addr, int size );
/** Read Boot code version number
*
* @return 2 bytes of boot code version number
*/
int read_BootVer( void );
/** Get user reserved flash start address
*
* @return start address of user reserved flash memory
* @see reserved_flash_area_size()
*/
char *reserved_flash_area_start( void );
/** Get user reserved flash size
*
* @return size of user reserved flash memory
* @see reserved_flash_area_start()
*/
int reserved_flash_area_size( void );
#if defined(TARGET_LPC11UXX) || defined(TARGET_LPC13XX) || defined(TARGET_LPC15XX)
/**
*
*/
void init_eeprom();
/** Copy RAM to EEPROM (LPC11U24)
*
* @param source_addr Source RAM address from which data bytes are to be read.
* @param target_addr Destination EEPROM address where data bytes are to be written.
* @param size Number of bytes to be written.
* @return error code: CMD_SUCCESS | SRC_ADDR_NOT_MAPPED | DST_ADDR_NOT_MAPPED
* Remark: The top 64 bytes of the EEPROM memory are reserved and cannot be written to.
*/
int write_eeprom( char *source_addr, char *target_addr, int size );
/** Copy EEPROM to RAM (LPC11U24)
*
* @param source_addr Source EEPROM address from which data bytes are to be read.
* @param target_addr Destination RAM address where data bytes are to be written.
* @param size Number of bytes to be written.
* @return error code: CMD_SUCCESS | SRC_ADDR_NOT_MAPPED | DST_ADDR_NOT_MAPPED
* Remark: The top 64 bytes of the EEPROM memory are reserved and cannot be written to.
*/
int read_eeprom( char *source_addr, char *target_addr, int size );
#elif defined(TARGET_LPC81X) || defined(TARGET_LPC82X)
/** Erase page(s) (LPC812, LPC824)
*
* @param start Start page number.
* @param end End page number (should be greater than or equal to start page).
* @return error code: CMD_SUCCESS | BUSY | SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION | INVALID_SECTOR
*/
int erase_page( int start, int end );
#endif
private:
IAP_call iap_entry;
unsigned int IAP_command[ 5 ];
unsigned int IAP_result[ 5 ];
int cclk_kHz;
}
;
#endif // #ifndef MBED_IAP