Yasushi TAUCHI
スマートコンセント（富士通 FX-5204PS)をIEEE1888 StorageにWRITEするサンプルプログラムです。
Dependencies: EthernetInterface FiapV2 HTTPClientForSOAP NTPClient TextLCD mbed-rtos mbed spxml
Fork of
BlueUSB_f
by 
Yasushi TAUCHI
スマートコンセント（富士通 FX-5204PS)をIEEE1888 StorageにWRITEするサンプルプログラムです。
USB HUBを使用して2台利用した例です。
表示のみは http://mbed.org/users/yueee_yt/code/BlueUSB_f/で公開しています。
BlueUSBより派生していますが、BluetoothとMass Storage Classは利用できません。
2台まで確認していますが、プログラム的には10台まで接続できるようにしています。
（RTOSとの整合により難しいかもしれません）
Diff: USBHost.h
- Revision:
- 1:3f2890d103fb
- Parent:
- 0:606b230e5b4a
--- a/USBHost.h Sat Apr 10 00:30:24 2010 +0000
+++ b/USBHost.h Wed Sep 26 06:29:47 2012 +0000
@@ -39,11 +39,11 @@
#define ENDPOINT_BULK 2
#define ENDPOINT_INTERRUPT 3
-#define DESCRIPTOR_TYPE_DEVICE 1
-#define DESCRIPTOR_TYPE_CONFIGURATION 2
-#define DESCRIPTOR_TYPE_STRING 3
-#define DESCRIPTOR_TYPE_INTERFACE 4
-#define DESCRIPTOR_TYPE_ENDPOINT 5
+#define DESCRIPTOR_TYPE_DEVICE 1
+#define DESCRIPTOR_TYPE_CONFIGURATION 2
+#define DESCRIPTOR_TYPE_STRING 3
+#define DESCRIPTOR_TYPE_INTERFACE 4
+#define DESCRIPTOR_TYPE_ENDPOINT 5
#define DESCRIPTOR_TYPE_HID 0x21
#define DESCRIPTOR_TYPE_REPORT 0x22
@@ -52,24 +52,24 @@
enum USB_CLASS_CODE
{
- CLASS_DEVICE,
- CLASS_AUDIO,
- CLASS_COMM_AND_CDC_CONTROL,
- CLASS_HID,
- CLASS_PHYSICAL = 0x05,
- CLASS_STILL_IMAGING,
- CLASS_PRINTER,
- CLASS_MASS_STORAGE,
- CLASS_HUB,
- CLASS_CDC_DATA,
- CLASS_SMART_CARD,
- CLASS_CONTENT_SECURITY = 0x0D,
- CLASS_VIDEO = 0x0E,
- CLASS_DIAGNOSTIC_DEVICE = 0xDC,
- CLASS_WIRELESS_CONTROLLER = 0xE0,
- CLASS_MISCELLANEOUS = 0xEF,
- CLASS_APP_SPECIFIC = 0xFE,
- CLASS_VENDOR_SPECIFIC = 0xFF
+ CLASS_DEVICE,
+ CLASS_AUDIO,
+ CLASS_COMM_AND_CDC_CONTROL,
+ CLASS_HID,
+ CLASS_PHYSICAL = 0x05,
+ CLASS_STILL_IMAGING,
+ CLASS_PRINTER,
+ CLASS_MASS_STORAGE,
+ CLASS_HUB,
+ CLASS_CDC_DATA,
+ CLASS_SMART_CARD,
+ CLASS_CONTENT_SECURITY = 0x0D,
+ CLASS_VIDEO = 0x0E,
+ CLASS_DIAGNOSTIC_DEVICE = 0xDC,
+ CLASS_WIRELESS_CONTROLLER = 0xE0,
+ CLASS_MISCELLANEOUS = 0xEF,
+ CLASS_APP_SPECIFIC = 0xFE,
+ CLASS_VENDOR_SPECIFIC = 0xFF
};
#define DEVICE_TO_HOST 0x80
@@ -77,22 +77,22 @@
#define REQUEST_TYPE_CLASS 0x20
#define RECIPIENT_DEVICE 0x00
#define RECIPIENT_INTERFACE 0x01
-#define RECIPIENT_ENDPOINT 0x02
-#define RECIPIENT_OTHER 0x03
+#define RECIPIENT_ENDPOINT 0x02
+#define RECIPIENT_OTHER 0x03
-#define GET_STATUS 0
-#define CLEAR_FEATURE 1
-#define SET_FEATURE 3
-#define SET_ADDRESS 5
-#define GET_DESCRIPTOR 6
-#define SET_DESCRIPTOR 7
-#define GET_CONFIGURATION 8
-#define SET_CONFIGURATION 9
-#define GET_INTERFACE 10
-#define SET_INTERFACE 11
-#define SYNCH_FRAME 11
+#define GET_STATUS 0
+#define CLEAR_FEATURE 1
+#define SET_FEATURE 3
+#define SET_ADDRESS 5
+#define GET_DESCRIPTOR 6
+#define SET_DESCRIPTOR 7
+#define GET_CONFIGURATION 8
+#define SET_CONFIGURATION 9
+#define GET_INTERFACE 10
+#define SET_INTERFACE 11
+#define SYNCH_FRAME 11
-// -5 is nak
+// -5 is nak
/*
0010 ACK Handshake
1010 NAK Handshake
@@ -110,55 +110,55 @@
typedef struct
{
- u8 bLength;
- u8 bDescriptorType;
- u16 bcdUSB;
- u8 bDeviceClass;
- u8 bDeviceSubClass;
- u8 bDeviceProtocol;
- u8 bMaxPacketSize;
- u16 idVendor;
- u16 idProduct;
- u16 bcdDevice; // version
- u8 iManufacturer;
- u8 iProduct;
- u8 iSerialNumber;
- u8 bNumConfigurations;
-} DeviceDescriptor; // 16 bytes
+ u8 bLength;
+ u8 bDescriptorType;
+ u16 bcdUSB;
+ u8 bDeviceClass;
+ u8 bDeviceSubClass;
+ u8 bDeviceProtocol;
+ u8 bMaxPacketSize;
+ u16 idVendor;
+ u16 idProduct;
+ u16 bcdDevice; // version
+ u8 iManufacturer;
+ u8 iProduct;
+ u8 iSerialNumber;
+ u8 bNumConfigurations;
+} DeviceDescriptor; // 16 bytes
typedef struct
{
- u8 bLength;
- u8 bDescriptorType;
- u16 wTotalLength;
- u8 bNumInterfaces;
- u8 bConfigurationValue; // Value to use as an argument to select this configuration
- u8 iConfiguration; // Index of String Descriptor describing this configuration
- u8 bmAttributes; // Bitmap D7 Reserved, set to 1. (USB 1.0 Bus Powered),D6 Self Powered,D5 Remote Wakeup,D4..0 = 0
- u8 bMaxPower; // Maximum Power Consumption in 2mA units
+ u8 bLength;
+ u8 bDescriptorType;
+ u16 wTotalLength;
+ u8 bNumInterfaces;
+ u8 bConfigurationValue; // Value to use as an argument to select this configuration
+ u8 iConfiguration; // Index of String Descriptor describing this configuration
+ u8 bmAttributes; // Bitmap D7 Reserved, set to 1. (USB 1.0 Bus Powered),D6 Self Powered,D5 Remote Wakeup,D4..0 = 0
+ u8 bMaxPower; // Maximum Power Consumption in 2mA units
} ConfigurationDescriptor;
typedef struct
{
- u8 bLength;
- u8 bDescriptorType;
- u8 bInterfaceNumber;
- u8 bAlternateSetting;
- u8 bNumEndpoints;
- u8 bInterfaceClass;
- u8 bInterfaceSubClass;
- u8 bInterfaceProtocol;
- u8 iInterface; // Index of String Descriptor Describing this interface
+ u8 bLength;
+ u8 bDescriptorType;
+ u8 bInterfaceNumber;
+ u8 bAlternateSetting;
+ u8 bNumEndpoints;
+ u8 bInterfaceClass;
+ u8 bInterfaceSubClass;
+ u8 bInterfaceProtocol;
+ u8 iInterface; // Index of String Descriptor Describing this interface
} InterfaceDescriptor;
typedef struct
{
- u8 bLength;
- u8 bDescriptorType;
- u8 bEndpointAddress; // Bits 0:3 endpoint, Bits 7 Direction 0 = Out, 1 = In (Ignored for Control Endpoints)
- u8 bmAttributes; // Bits 0:1 00 = Control, 01 = Isochronous, 10 = Bulk, 11 = Interrupt
- u16 wMaxPacketSize;
- u8 bInterval; // Interval for polling endpoint data transfers.
+ u8 bLength;
+ u8 bDescriptorType;
+ u8 bEndpointAddress; // Bits 0:3 endpoint, Bits 7 Direction 0 = Out, 1 = In (Ignored for Control Endpoints)
+ u8 bmAttributes; // Bits 0:1 00 = Control, 01 = Isochronous, 10 = Bulk, 11 = Interrupt
+ u16 wMaxPacketSize;
+ u8 bInterval; // Interval for polling endpoint data transfers.
} EndpointDescriptor;
typedef struct {
@@ -179,22 +179,22 @@
void USBLoop();
u8* USBGetBuffer(u32* len);
-// Optional callback for transfers, called at interrupt time
+// Optional callback for transfers, called at interrupt time
typedef void (*USBCallback)(int device, int endpoint, int status, u8* data, int len, void* userData);
-// Transfers
+// Transfers
int USBControlTransfer(int device, int request_type, int request, int value, int index, u8* data, int length, USBCallback callback = 0, void* userData = 0);
int USBInterruptTransfer(int device, int ep, u8* data, int length, USBCallback callback = 0, void* userData = 0);
-int USBBulkTransfer(int device, int ep, u8* data, int length, USBCallback callback = 0, void* userData = 0);
+int USBBulkTransfer (int device, int ep, u8* data, int length, USBCallback callback = 0, void* userData = 0);
-// Standard Device methods
+// Standard Device methods
int GetDescriptor(int device, int descType, int descIndex, u8* data, int length);
int GetString(int device, int index, char* dst, int length);
int SetAddress(int device, int new_addr);
int SetConfiguration(int device, int configNum);
int SetInterface(int device, int ifNum, int altNum);
-// Implemented to notify app of the arrival of a device
+// Implemented to notify app of the arrival of a device
void OnLoadDevice(int device, DeviceDescriptor* deviceDesc, InterfaceDescriptor* interfaceDesc);
#endif
\ No newline at end of file