changed low freq. clock source to IRC

Dependents:   BLE_ANCS_SDAPI_IRC

Fork of nRF51822 by Nordic Semiconductor

Revision:
17:c3e11bb6cb72
Parent:
3:791d672cbbec
Child:
22:c6ee8136847e
--- a/nRF51Gap.cpp	Fri May 30 13:32:48 2014 +0100
+++ b/nRF51Gap.cpp	Wed Jun 04 09:19:57 2014 +0100
@@ -13,7 +13,7 @@
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
-  
+
 #include "nRF51Gap.h"
 #include "mbed.h"
 
@@ -34,16 +34,16 @@
                 The optional Scan Response payload if the advertising
                 type is set to \ref GapAdvertisingParams::ADV_SCANNABLE_UNDIRECTED
                 in \ref GapAdveritinngParams
-            
+
     @returns    \ref ble_error_t
-    
+
     @retval     BLE_ERROR_NONE
                 Everything executed properly
 
     @retval     BLE_ERROR_BUFFER_OVERFLOW
                 The proposed action would cause a buffer overflow.  All
                 advertising payloads must be <= 31 bytes, for example.
-                
+
     @retval     BLE_ERROR_NOT_IMPLEMENTED
                 A feature was requested that is not yet supported in the
                 nRF51 firmware or hardware.
@@ -58,18 +58,17 @@
     @endcode
 */
 /**************************************************************************/
-ble_error_t nRF51Gap::setAdvertisingData(const GapAdvertisingData & advData, const GapAdvertisingData & scanResponse)
+ble_error_t nRF51Gap::setAdvertisingData(const GapAdvertisingData &advData,
+                                         const GapAdvertisingData &scanResponse)
 {
     /* Make sure we don't exceed the advertising payload length */
-    if (advData.getPayloadLen() > GAP_ADVERTISING_DATA_MAX_PAYLOAD)
-    {
+    if (advData.getPayloadLen() > GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
         return BLE_ERROR_BUFFER_OVERFLOW;
     }
-    
+
     /* Make sure we have a payload! */
-    if (advData.getPayloadLen() == 0)
-    {
-      return BLE_ERROR_PARAM_OUT_OF_RANGE;
+    if (advData.getPayloadLen() == 0) {
+        return BLE_ERROR_PARAM_OUT_OF_RANGE;
     }
 
     /* Check the scan response payload limits */
@@ -86,13 +85,19 @@
     //        return BLE_ERROR_PARAM_OUT_OF_RANGE;
     //    }
     //}
-    
+
     /* Send advertising data! */
-    ASSERT( ERROR_NONE == sd_ble_gap_adv_data_set(advData.getPayload(), advData.getPayloadLen(),
-                                                  scanResponse.getPayload(), scanResponse.getPayloadLen()), BLE_ERROR_PARAM_OUT_OF_RANGE);
+    ASSERT(ERROR_NONE ==
+           sd_ble_gap_adv_data_set(advData.getPayload(),
+                                   advData.getPayloadLen(),
+                                   scanResponse.getPayload(),
+                                   scanResponse.getPayloadLen()),
+           BLE_ERROR_PARAM_OUT_OF_RANGE);
 
-	/* Make sure the GAP Service appearance value is aligned with the appearance from GapAdvertisingData */	
-	ASSERT( ERROR_NONE == sd_ble_gap_appearance_set(advData.getAppearance()), BLE_ERROR_PARAM_OUT_OF_RANGE);
+    /* Make sure the GAP Service appearance value is aligned with the
+     *appearance from GapAdvertisingData */
+    ASSERT(ERROR_NONE == sd_ble_gap_appearance_set(advData.getAppearance()),
+           BLE_ERROR_PARAM_OUT_OF_RANGE);
 
     /* ToDo: Perform some checks on the payload, for example the Scan Response can't */
     /* contains a flags AD type, etc. */
@@ -104,14 +109,14 @@
 /*!
     @brief  Starts the BLE HW, initialising any services that were
             added before this function was called.
-            
+
     @note   All services must be added before calling this function!
-            
+
     @returns    ble_error_t
-    
+
     @retval     BLE_ERROR_NONE
                 Everything executed properly
-                
+
     @section EXAMPLE
 
     @code
@@ -119,63 +124,63 @@
     @endcode
 */
 /**************************************************************************/
-ble_error_t nRF51Gap::startAdvertising(const GapAdvertisingParams & params)
+ble_error_t nRF51Gap::startAdvertising(const GapAdvertisingParams &params)
 {
-      /* Make sure we support the advertising type */
-    if (params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED)
-    {
+    /* Make sure we support the advertising type */
+    if (params.getAdvertisingType() ==
+        GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) {
         /* ToDo: This requires a propery security implementation, etc. */
         return BLE_ERROR_NOT_IMPLEMENTED;
     }
 
     /* Check interval range */
-    if (params.getAdvertisingType() == GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED)
-    {
+    if (params.getAdvertisingType() ==
+        GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED) {
         /* Min delay is slightly longer for unconnectable devices */
         if ((params.getInterval() < GAP_ADV_PARAMS_INTERVAL_MIN_NONCON) ||
-            (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX))
-        {
+            (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX)) {
             return BLE_ERROR_PARAM_OUT_OF_RANGE;
         }
-    }
-    else
-    {
+    } else {
         if ((params.getInterval() < GAP_ADV_PARAMS_INTERVAL_MIN) ||
-            (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX))
-        {
+            (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX)) {
             return BLE_ERROR_PARAM_OUT_OF_RANGE;
         }
     }
 
     /* Check timeout is zero for Connectable Directed */
-    if ((params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
-        (params.getTimeout() != 0))
-    {
+    if ((params.getAdvertisingType() ==
+         GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
+        (params.getTimeout() != 0)) {
         /* Timeout must be 0 with this type, although we'll never get here */
         /* since this isn't implemented yet anyway */
         return BLE_ERROR_PARAM_OUT_OF_RANGE;
     }
 
     /* Check timeout for other advertising types */
-    if ((params.getAdvertisingType() != GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
-        (params.getTimeout() > GAP_ADV_PARAMS_TIMEOUT_MAX))
-    {
+    if ((params.getAdvertisingType() !=
+         GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
+        (params.getTimeout() > GAP_ADV_PARAMS_TIMEOUT_MAX)) {
         return BLE_ERROR_PARAM_OUT_OF_RANGE;
     }
 
     /* Start Advertising */
-    ble_gap_adv_params_t adv_para = { 0 };
+    ble_gap_adv_params_t adv_para = {0};
 
-    adv_para.type        = params.getAdvertisingType() ;
-    adv_para.p_peer_addr = NULL                        ; // Undirected advertisement
-    adv_para.fp          = BLE_GAP_ADV_FP_ANY          ;
-    adv_para.p_whitelist = NULL                        ;
-    adv_para.interval    = params.getInterval()        ; // advertising interval (in units of 0.625 ms)
-    adv_para.timeout     = params.getTimeout()         ;
+    adv_para.type        = params.getAdvertisingType();
+    adv_para.p_peer_addr = NULL;                         // Undirected
+                                                         // advertisement
+    adv_para.fp          = BLE_GAP_ADV_FP_ANY;
+    adv_para.p_whitelist = NULL;
+    adv_para.interval    = params.getInterval();         // advertising
+                                                         // interval (in units
+                                                         // of 0.625 ms)
+    adv_para.timeout     = params.getTimeout();
 
-    ASSERT( ERROR_NONE == sd_ble_gap_adv_start(&adv_para), BLE_ERROR_PARAM_OUT_OF_RANGE);
-		
-	state.advertising = 1;
+    ASSERT(ERROR_NONE == sd_ble_gap_adv_start(&adv_para),
+           BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+    state.advertising = 1;
 
     return BLE_ERROR_NONE;
 }
@@ -183,12 +188,12 @@
 /**************************************************************************/
 /*!
     @brief  Stops the BLE HW and disconnects from any devices
-            
+
     @returns    ble_error_t
-    
+
     @retval     BLE_ERROR_NONE
                 Everything executed properly
-                
+
     @section EXAMPLE
 
     @code
@@ -198,23 +203,23 @@
 /**************************************************************************/
 ble_error_t nRF51Gap::stopAdvertising(void)
 {
-  /* Stop Advertising */
-  ASSERT( ERROR_NONE == sd_ble_gap_adv_stop(), BLE_ERROR_PARAM_OUT_OF_RANGE);
+    /* Stop Advertising */
+    ASSERT(ERROR_NONE == sd_ble_gap_adv_stop(), BLE_ERROR_PARAM_OUT_OF_RANGE);
 
-	state.advertising = 0;
+    state.advertising = 0;
 
-  return BLE_ERROR_NONE;
+    return BLE_ERROR_NONE;
 }
 
 /**************************************************************************/
 /*!
     @brief  Disconnects if we are connected to a central device
-            
+
     @returns    ble_error_t
-    
+
     @retval     BLE_ERROR_NONE
                 Everything executed properly
-                
+
     @section EXAMPLE
 
     @code
@@ -224,14 +229,16 @@
 /**************************************************************************/
 ble_error_t nRF51Gap::disconnect(void)
 {
-	state.advertising = 0;
-  state.connected = 0;
-	
-	/* Disconnect if we are connected to a central device */
-  ASSERT_INT(ERROR_NONE, sd_ble_gap_disconnect(m_connectionHandle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION),
-  	         BLE_ERROR_PARAM_OUT_OF_RANGE);
-   
-  return BLE_ERROR_NONE;
+    state.advertising = 0;
+    state.connected   = 0;
+
+    /* Disconnect if we are connected to a central device */
+    ASSERT_INT(ERROR_NONE,
+               sd_ble_gap_disconnect(m_connectionHandle,
+                                     BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION),
+               BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+    return BLE_ERROR_NONE;
 }
 
 /**************************************************************************/
@@ -241,9 +248,9 @@
 /**************************************************************************/
 void nRF51Gap::setConnectionHandle(uint16_t con_handle)
 {
-  m_connectionHandle = con_handle;
+    m_connectionHandle = con_handle;
 }
- 
+
 /**************************************************************************/
 /*!
     @brief  Gets the 16-bit connection handle
@@ -251,13 +258,13 @@
 /**************************************************************************/
 uint16_t nRF51Gap::getConnectionHandle(void)
 {
-  return m_connectionHandle;
+    return m_connectionHandle;
 }
- 
+
 /**************************************************************************/
 /*!
     @brief      Sets the BLE device address
-            
+
     @returns    ble_error_t
 
     @section EXAMPLE
@@ -272,13 +279,17 @@
 /**************************************************************************/
 ble_error_t nRF51Gap::setAddress(addr_type_t type, const uint8_t address[6])
 {
-  if ( type > ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE) return BLE_ERROR_PARAM_OUT_OF_RANGE;
- 
-  ble_gap_addr_t dev_addr;
-  dev_addr.addr_type = type;
-  memcpy(dev_addr.addr, address, 6);
- 
-  ASSERT_INT(ERROR_NONE, sd_ble_gap_address_set(&dev_addr), BLE_ERROR_PARAM_OUT_OF_RANGE);
- 
-  return BLE_ERROR_NONE;
+    if (type > ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE) {
+        return BLE_ERROR_PARAM_OUT_OF_RANGE;
+    }
+
+    ble_gap_addr_t dev_addr;
+    dev_addr.addr_type = type;
+    memcpy(dev_addr.addr, address, 6);
+
+    ASSERT_INT(ERROR_NONE,
+               sd_ble_gap_address_set(&dev_addr),
+               BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+    return BLE_ERROR_NONE;
 }