A demo application that receive and print tempreture and humidity from STM431J by USB400J that pluged-in to mbed application board.
Dependencies: C12832 USB400Serial USBHost mbed
main.cpp
- Committer:
- ytsuboi
- Date:
- 2017-05-25
- Revision:
- 0:2a9b1bf70f5e
File content as of revision 0:2a9b1bf70f5e:
#include "mbed.h" #include "C12832.h" #include "USB400Serial.h" C12832 lcd(p5, p7, p6, p8, p11); DigitalOut led1(LED1); DigitalOut led2(LED2); DigitalOut led3(LED3); DigitalOut led4(LED4); Serial pc(USBTX, USBRX); uint8_t u8CRC8Table[256] = { 0x00, 0x07, 0x0e, 0x09, 0x1c, 0x1b, 0x12, 0x15, 0x38, 0x3f, 0x36, 0x31, 0x24, 0x23, 0x2a, 0x2d, 0x70, 0x77, 0x7e, 0x79, 0x6c, 0x6b, 0x62, 0x65, 0x48, 0x4f, 0x46, 0x41, 0x54, 0x53, 0x5a, 0x5d, 0xe0, 0xe7, 0xee, 0xe9, 0xfc, 0xfb, 0xf2, 0xf5, 0xd8, 0xdf, 0xd6, 0xd1, 0xc4, 0xc3, 0xca, 0xcd, 0x90, 0x97, 0x9e, 0x99, 0x8c, 0x8b, 0x82, 0x85, 0xa8, 0xaf, 0xa6, 0xa1, 0xb4, 0xb3, 0xba, 0xbd, 0xc7, 0xc0, 0xc9, 0xce, 0xdb, 0xdc, 0xd5, 0xd2, 0xff, 0xf8, 0xf1, 0xf6, 0xe3, 0xe4, 0xed, 0xea, 0xb7, 0xb0, 0xb9, 0xbe, 0xab, 0xac, 0xa5, 0xa2, 0x8f, 0x88, 0x81, 0x86, 0x93, 0x94, 0x9d, 0x9a, 0x27, 0x20, 0x29, 0x2e, 0x3b, 0x3c, 0x35, 0x32, 0x1f, 0x18, 0x11, 0x16, 0x03, 0x04, 0x0d, 0x0a, 0x57, 0x50, 0x59, 0x5e, 0x4b, 0x4c, 0x45, 0x42, 0x6f, 0x68, 0x61, 0x66, 0x73, 0x74, 0x7d, 0x7a, 0x89, 0x8e, 0x87, 0x80, 0x95, 0x92, 0x9b, 0x9c, 0xb1, 0xb6, 0xbf, 0xb8, 0xad, 0xaa, 0xa3, 0xa4, 0xf9, 0xfe, 0xf7, 0xf0, 0xe5, 0xe2, 0xeb, 0xec, 0xc1, 0xc6, 0xcf, 0xc8, 0xdd, 0xda, 0xd3, 0xd4, 0x69, 0x6e, 0x67, 0x60, 0x75, 0x72, 0x7b, 0x7c, 0x51, 0x56, 0x5f, 0x58, 0x4d, 0x4a, 0x43, 0x44, 0x19, 0x1e, 0x17, 0x10, 0x05, 0x02, 0x0b, 0x0c, 0x21, 0x26, 0x2f, 0x28, 0x3d, 0x3a, 0x33, 0x34, 0x4e, 0x49, 0x40, 0x47, 0x52, 0x55, 0x5c, 0x5b, 0x76, 0x71, 0x78, 0x7f, 0x6A, 0x6d, 0x64, 0x63, 0x3e, 0x39, 0x30, 0x37, 0x22, 0x25, 0x2c, 0x2b, 0x06, 0x01, 0x08, 0x0f, 0x1a, 0x1d, 0x14, 0x13, 0xae, 0xa9, 0xa0, 0xa7, 0xb2, 0xb5, 0xbc, 0xbb, 0x96, 0x91, 0x98, 0x9f, 0x8a, 0x8D, 0x84, 0x83, 0xde, 0xd9, 0xd0, 0xd7, 0xc2, 0xc5, 0xcc, 0xcb, 0xe6, 0xe1, 0xe8, 0xef, 0xfa, 0xfd, 0xf4, 0xf3 }; #define proccrc8(u8CRC, u8Data) (u8CRC8Table[u8CRC ^ u8Data]) void serial_task(void const*) { USB400Serial serial; int i; int dataLength; int optionalLength; uint8_t c; uint8_t crc; int sensor = 0; int humidity = 0; int temperature = 0; while(1) { while(!serial.connect()) Thread::wait(500); while (1) { if (!serial.connected()) break; if (serial.available()) { c = serial.getc(); if (c == 0x55) { crc = 0; c = serial.getc(); crc = proccrc8(crc, c); dataLength = c; c = serial.getc(); crc = proccrc8(crc, c); dataLength = (dataLength << 8) | c; c = serial.getc(); crc = proccrc8(crc, c); optionalLength = c; c = serial.getc(); crc = proccrc8(crc, c); // packet type c = serial.getc(); crc = proccrc8(crc, c); // CRC if (crc == 0) { crc = 0; for (i = 0; i < dataLength; i++) { c = serial.getc(); crc = proccrc8(crc, c); if (i == 4) { // printf("Sensor: %02X ", c); sensor = c; } //A5-04-01 if (i == 6) { humidity = c; } if (i == 7) { temperature = c; } } // printf("hum:%3.1f%% temp:%2.2fC\r\n", humidity*0.4, temperature*0.16); if (sensor == 0x34) { lcd.locate(0,12); lcd.printf("%02X Temp:%2.2f C Hum:%3.1f %%\r\n", sensor, temperature*0.16, humidity*0.4); } if (sensor == 0x52) { lcd.locate(0,21); lcd.printf("%02X Temp:%2.2f C Hum:%3.1f %%\r\n", sensor, temperature*0.16, humidity*0.4); } for (i = 0; i < optionalLength; i++) { c = serial.getc(); crc = proccrc8(crc, c); } c = serial.getc(); crc = proccrc8(crc, c); } } } } } } int main() { lcd.cls(); lcd.locate(0,3); lcd.printf("mbed application board!"); Thread serialTask(serial_task, NULL, osPriorityNormal, 256 * 4); while(1) { led1 = !led1; Thread::wait(500); } }