The MGC3130 is the world’s first electrical-field (E-field) based three-dimensional (3D) tracking and gesture controller
Dependents: NucleoMGC3130 i2c_master
RuntimeParameter/OutputEnable.h
- Committer:
- yangcq88517
- Date:
- 2015-10-07
- Revision:
- 1:621c4e9238ef
File content as of revision 1:621c4e9238ef:
#ifndef UK_AC_HERTS_SMARTLAB_MGC3130_OutputEnable #define UK_AC_HERTS_SMARTLAB_MGC3130_OutputEnable #include "Parameter.h" /* The Argument0 defines which Data need to be enabled or disabled. The Argument1 defines the mask for the Data which need to be configured. Bits 0...12: Payload elements: If set to ‘1’, payload elements will be part of the message Bit 0: DSP Status Bit 1: Gesture Data Bit 2: TouchInfo Bit 3: AirWheelInfo Bit 4: xyzPosition Bit 5: Noise Power Bit 6...10: These bits are reserved and must be set to ‘0’ Bit 11: CICData (Uncalibrated Signal) Bit 12: SDData (Signal Deviation) Bits 13...15: These bits are reserved and must be set to ‘0’ Bits 16...17: SystemInfo status bits: If set to ‘1’, the reporting of a state change in the payload element SystemInfo is enabled Bit 16: EnvironmentalNoise indication Bit 17: Clipping indication Bit 18: DSP running Bits 19: AirWheelCounterDecimation: If set to ‘1’, the AirWheel counter is decimated by the factor of 4 Bit 20: TimeStampOverflow: This applies when AirWheel or Touch Detection is ongoing. If activated, a message will be sent when the counter in the payload element TimeStamp is overflowing (TimeStamp=0) Bits 21...26: These bits are reserved Bits 27...31: GesturesInfo status bits: If set to ‘1’, the reporting of a state change in the payload element GestureInfo is enabled. Bit 27: HandPresence flag Bit 28: HandHold flag Bit 29: HandInside flag Bit 30: This bit is reserved Bit 31: GestureInProgress flag */ class OutputEnable: public Parameter { public: OutputEnable(); OutputEnable * enableDSPStatus(bool enable); OutputEnable * enableGestureData(bool enable); OutputEnable * enableTouchInfo(bool enable); OutputEnable * enableAirWheelInfo(bool enable); OutputEnable * enablexyzPosition(bool enable); OutputEnable * enableNoisePower(bool enable); OutputEnable * enableUncalibratedSignal(bool enable); OutputEnable * enableSignalDeviation(bool enable); OutputEnable * enableEnvironmentalNoise(bool enable); OutputEnable * enableClipping(bool enable); OutputEnable * enableDSP(bool enable); //If set, the AirWheel counter is decimated by the factor of 4 OutputEnable * enableAirWheelCounterDecimation(bool enable); //This applies when AirWheel or Touch Detection is ongoing. If activated, a message will be sent when the counter in the payload element TimeStamp is overflowing (TimeStamp=0) OutputEnable * enableTimeStampOverflow(bool enable); //GesturesInfo status bits: If set to ‘1’, the reporting of a state change in the payload element GestureInfo is enabled. OutputEnable * enableHandPresence(bool enable); //GesturesInfo status bits: If set to ‘1’, the reporting of a state change in the payload element GestureInfo is enabled. OutputEnable * enableHandHold(bool enable); //GesturesInfo status bits: If set to ‘1’, the reporting of a state change in the payload element GestureInfo is enabled. OutputEnable * enableHandInside(bool enable); OutputEnable * enableGestureInProgress(bool enable); }; #endif