Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/PinNames.h

Revision:

0:f269e3021894

diff -r 000000000000 -r f269e3021894 targets/TARGET_ONSEMI/TARGET_NCS36510/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/PinNames.h	Sun Oct 23 15:10:02 2016 +0000
@@ -0,0 +1,178 @@
+/**
+ ******************************************************************************
+ * @file PinNames.h
+ * @brief Implements common PIN names for peripherals.
+ * @internal
+ * @author ON Semiconductor
+ * $Rev: 0.1 $
+ * $Date: 2015-11-06 $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup debug
+ */
+
+
+#ifndef PINNAME_H_
+#define PINNAME_H_
+
+#include "types.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    GPIO0 = 0,
+    GPIO1,
+    GPIO2,
+    GPIO3,
+    GPIO4,
+    GPIO5,
+    GPIO6,
+    GPIO7,
+    GPIO8,
+    GPIO9,
+    GPIO10,
+    GPIO11,
+    GPIO12,
+    GPIO13,
+    GPIO14,
+    GPIO15,
+    GPIO16,
+    GPIO17,
+    A0,
+    A1,
+    A2,
+    A3,
+    UART1_TX = GPIO0,
+    UART1_RX = GPIO1,
+    UART2_TX = GPIO8,
+    UART2_RX = GPIO9,
+
+    I2C1_SCLK_1    = GPIO2,
+    I2C1_SDATA_1   = GPIO3,
+    I2C1_SCLK_2    = GPIO5,
+    I2C1_SDATA_2   = GPIO4,
+    I2C1_SCLK      = I2C1_SCLK_1,   /*Default*/
+    I2C1_SDATA     = I2C1_SDATA_1,  /*Default*/
+
+    I2C2_SCLK_1    = GPIO14,
+    I2C2_SDATA_1   = GPIO15,
+    I2C2_SCLK_2    = GPIO17,
+    I2C2_SDATA_2   = GPIO16,
+    I2C2_SCLK      = I2C2_SCLK_2,  /*Default*/
+    I2C2_SDATA     = I2C2_SDATA_2, /*Default*/
+    I2C_SCL        = I2C1_SCLK_1,  /*Default*/
+    I2C_SDA        = I2C1_SDATA_1, /*Default*/
+
+    /* SPI 1 with 1st set of CROSS BAR */
+    SPI1_SSNO0_1    = GPIO0,
+    SPI1_SSNO1_1    = GPIO1,
+    SPI1_SSNO2_1    = GPIO2,
+    SPI1_SSNO3_1    = GPIO3,
+
+    /* SPI 1 with 2st set of CROSS BAR */
+    SPI1_SCLK_2      = GPIO4,
+    SPI1_SDATAO_2    = GPIO5,
+    SPI1_SDATAI_2    = GPIO6,
+    SPI1_SSNI_2      = GPIO7,
+    SPI1_SSNO0_2     = GPIO8,
+    SPI1_SSNO1_2     = GPIO9,
+    SPI1_SSNO2_2     = GPIO10,
+
+    SPI1_SCLK    = SPI1_SCLK_2,   /*Default*/
+    SPI1_SDATAO  = SPI1_SDATAO_2, /*Default*/
+    SPI1_SDATAI  = SPI1_SDATAI_2, /*Default*/
+    SPI1_SSNI    = SPI1_SSNI_2,   /*Default*/
+    SPI1_SSNO0   = SPI1_SSNO0_2,  /*Default*/
+    SPI1_SSNO1   = SPI1_SSNO1_2,  /*Default*/
+    SPI1_SSNO2   = SPI1_SSNO2_2,  /*Default*/
+
+    /* SPI 1 with 3rd set of CROSS BAR */
+    SPI1_SCLK_3     = GPIO8,
+    SPI1_SDATAO_3   = GPIO9,
+    SPI1_SDATAI_3   = GPIO10,
+
+    /* SPI 2 */
+    SPI2_SCLK     = GPIO14,
+    SPI2_SDATAO   = GPIO15,
+    SPI2_SDATAI   = GPIO16,
+    SPI2_SSNI     = GPIO17,
+    SPI2_SSNO0    = GPIO17,
+
+    // Generic signals namings
+    LED1        = GPIO4,
+    LED2        = GPIO6,
+    LED3        = GPIO5,
+    LED4        = (int)0xFFFFFFFF,
+    LED5        = (int)0xFFFFFFFF,
+    LED_GREEN   = GPIO4,
+    LED_YELLOW  = GPIO6,
+    LED_BLUE    = GPIO5,
+    USER_BUTTON = GPIO7,  /*NEW connection on NCS36510-RF Rev 1.1 - Alias of SW1 */
+    SW1 = GPIO7,  /*NEW connection on NCS36510-RF Rev 1.1 */
+    SW2 = GPIO10,   /*NEW connection on NCS36510-RF Rev 1.1 */
+    SERIAL_TX   = GPIO0,
+    SERIAL_RX   = GPIO1,
+    USBTX       = GPIO0,
+    USBRX       = GPIO1,
+    D0          = GPIO9,
+    D1          = GPIO8,
+    D2          = GPIO4,
+    D3          = GPIO6,
+    D4          = GPIO5,
+    D5          = GPIO7,
+    D6          = GPIO10,
+    D7          = (int)0xFFFFFFFF,
+    D8          = (int)0xFFFFFFFF,
+    D9          = (int)0xFFFFFFFF,
+    D10         = GPIO17,
+    D11         = GPIO15,
+    D12         = GPIO16,
+    D13         = GPIO14,
+    D14         = GPIO3,
+    D15         = GPIO2,
+    NC          = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT,
+
+} PinDirection;
+
+typedef enum {
+    PushPullPullDown  = 0,
+    PushPullNoPull    = 1,
+    PushPullPullUp    = 2,
+    OpenDrainPullDown = 3,
+    OpenDrainNoPull   = 4,
+    OpenDrainPullUp   = 5,
+    PullNone          = PushPullNoPull,
+    PullUp            = PushPullPullUp,
+    PullDown          = PushPullPullDown,
+    OpenDrain         = OpenDrainPullUp,
+    PullDefault       = PullNone
+
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif //PINNAME_H_