mbed-os

Fork of mbed-os by erkin yucel

targets/TARGET_NXP/TARGET_LPC11U6X/gpio_api.c

Committer:
elessair
Date:
2016-10-23
Revision:
0:f269e3021894

File content as of revision 0:f269e3021894:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2014 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "mbed_assert.h"
#include "gpio_api.h"
#include "pinmap.h"

static int  gpio_enabled = 0;

static void gpio_enable(void) {
    gpio_enabled = 1;
    
    /* Enable AHB clock to the GPIO and IOCON domain. */
    LPC_SYSCON->SYSAHBCLKCTRL |= ((1 << 16) | (1 << 6));
}

uint32_t gpio_set(PinName pin) {
    MBED_ASSERT(pin != (PinName)NC);
    if (!gpio_enabled)
         gpio_enable();
    
    int func = ((pin == P0_0)  || // reset
                (pin == P0_10) || // SWCLK
                (pin == P0_11) || // TDI
                (pin == P0_12) || // TMS
                (pin == P0_13) || // TDO
                (pin == P0_14) || // TRST
                (pin == P0_15)) ? (1) : (0); // SWDIO
    
    pin_function(pin, func);
    
    return (1UL << ((int)pin >> PIN_SHIFT & 0x1F));
}

void gpio_init(gpio_t *obj, PinName pin) {
    obj->pin = pin;
    if (pin == (PinName)NC)
        return;

    obj->mask = gpio_set(pin);
    
    unsigned int port = (unsigned int)(pin >> PORT_SHIFT);

    obj->reg_set = &LPC_GPIO_PORT->SET[port];
    obj->reg_clr = &LPC_GPIO_PORT->CLR[port];
    obj->reg_in  = &LPC_GPIO_PORT->PIN[port];
    obj->reg_dir = &LPC_GPIO_PORT->DIR[port];
}

void gpio_mode(gpio_t *obj, PinMode mode) {
    pin_mode(obj->pin, mode);
}

void gpio_dir(gpio_t *obj, PinDirection direction) {
    MBED_ASSERT(obj->pin != (PinName)NC);
    switch (direction) {
        case PIN_INPUT :
            *obj->reg_dir &= ~obj->mask;
            break;
        case PIN_OUTPUT:
            *obj->reg_dir |=  obj->mask;
            break;
    }
}