Lee Kai Xuan
mbed-os
Fork of
mbed-os
by 
erkin yucel
Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/dma_map.h
- Revision:
- 0:f269e3021894
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/dma_map.h Sun Oct 23 15:10:02 2016 +0000
@@ -0,0 +1,108 @@
+/**
+******************************************************************************
+* @file dma_map.h
+* @brief DMA hw module register map
+* @internal
+* @author ON Semiconductor
+* $Rev: 3415 $
+* $Date: 2015-06-05 13:29:52 +0530 (Fri, 05 Jun 2015) $
+******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor).
+ * All rights reserved. This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions. The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and
+ * if applicable the software license agreement. Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions. By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+*
+* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+* ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+* @endinternal
+*
+* @ingroup dma
+*
+* @details
+*/
+
+#ifndef DMA_MAP_H_
+#define DMA_MAP_H_
+
+/*************************************************************************************************
+* *
+* Header files *
+* *
+*************************************************************************************************/
+
+#include "architecture.h"
+
+/**************************************************************************************************
+* *
+* Type definitions *
+* *
+**************************************************************************************************/
+
+/** DMA control HW registers structure overlay */
+#ifdef REVB
+typedef struct {
+ __IO uint32_t CONTROL; /**< Write 1 to enable DMA, write 0 to disable */
+ __IO uint32_t SOURCE; /**< Address of source, read to get the number of bytes written */
+ __IO uint32_t DESTINATION; /**< Address of destination, read to get the number of bytes written */
+ __IO uint32_t SIZE; /**< Lenght of the entire transfer */
+ __IO uint32_t STATUS; /**< To be debined */
+ __IO uint32_t INT_ENABLE; /**< Enable interrupt source by writing 1. Bit 0: DMA done, Bit 1: Source Error, Bit 2: Destination Error */
+ __IO uint32_t INT_CLEAR_ENABLE; /**< Clear Interrupt source by writing 1. Bit 0: DMA done, Bit 1: Source Error, Bit 2: Destination Error */
+ __I uint32_t INT_STATUS; /**< Current interrupt status. Bit 0: DMA done, Bit 1: Source Error, Bit 2: Destination Error */
+} DmaReg_t, *DmaReg_pt;
+#endif /* REVB */
+#ifdef REVD
+typedef struct {
+ union {
+ struct {
+ __IO uint32_t ENABLE:1; /**< DMA enable: 1 to enable; 0 to disable */
+ __IO uint32_t MODE :2; /**< DMA mode: 00 Memory to memory; 01 Memory to peripheral; 10 Peripheral to memory; 11 Peripheral to peripheral */
+ } BITS;
+ __IO uint32_t WORD;
+ } CONTROL; /**< Control register */
+ __IO uint32_t SOURCE; /**< Address of source, read to get the number of bytes written */
+ __IO uint32_t DESTINATION; /**< Address of destination, read to get the number of bytes written */
+ __IO uint32_t SIZE; /**< Lenght of the entire transfer */
+ union {
+ struct {
+ __I uint32_t COMPLETED:1; /**< Done: 0 Not complete, 1 Complete */
+ __I uint32_t SOURCE_ERROR:1; /**< Source Error: 0 No Error, 1 Error */
+ __I uint32_t DESTINATION_ERROR:1; /**< Destination Error: 0 No Error, 1 Source Error */
+ } BITS;
+ __I uint32_t WORD;
+ } STATUS; /**< Status register */
+ union {
+ struct {
+ __IO uint32_t COMPLETED:1; /**< A write of 1 enables the interrupt generated by a DMA transfer complete */
+ __IO uint32_t SOURCE_ERROR:1; /**< A write of 1 enables the interrupt generated by an error on the source side of the DMA transfer */
+ __IO uint32_t DESTINATION_ERROR:1; /**< A write of 1 enables the interrupt generated by an error on the destination side of the DMA transfer */
+ } BITS;
+ __IO uint32_t WORD;
+ } INT_ENABLE; /**< Interrupt enable */
+ union {
+ struct {
+ __IO uint32_t COMPLETED:1; /**< A write clears the interrupt generated by a DMA transfer complete */
+ __IO uint32_t SOURCE_ERROR:1; /**< A write clears the interrupt generated by an error on the source side of the DMA transfer */
+ __IO uint32_t DESTINATION_ERROR:1; /**< A write clears the interrupt generated by an error on the destination side of the DMA transfer */
+ } BITS;
+ __IO uint32_t WORD;
+ } INT_CLEAR; /**< Interrupt clear */
+ union {
+ struct {
+ __I uint32_t COMPLETED:1; /**< Transfer complete interrupt */
+ __I uint32_t SOURCE_ERROR:1; /**< Source error interrupt */
+ __I uint32_t DESTINATION_ERROR:1; /**< Destination error interrupt */
+ } BITS;
+ __I uint32_t WORD;
+ } INT_STATUS; /**< Interrupt status */
+} DmaReg_t, *DmaReg_pt;
+#endif /* REVD */
+#endif /* DMA_MAP_H_ */