Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/PeripheralNames.h

Revision:

0:f269e3021894

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/PeripheralNames.h	Sun Oct 23 15:10:02 2016 +0000
@@ -0,0 +1,72 @@
+/**
+ ******************************************************************************
+ * @file peripheralnames.h
+ * @brief Implements an assertion.
+ * @internal
+ * @author ON Semiconductor
+ * $Rev: 0.1 $
+ * $Date: 2015-11-07 $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup debug
+ */
+
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#include "memory_map.h"  /* This is needed because enums use base adresses */
+#include "PinNames.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_0 = (int)ADCREG_BASE
+} ADCName;
+
+typedef enum {
+    UART_0 = (int)UART1REG_BASE,
+    UART_1 = (int)UART2REG_BASE,
+} UARTName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_0
+
+typedef enum {
+    SPI_0 = (int)SPI1REG_BASE,
+    SPI_1 = (int)SPI2REG_BASE
+} SPIName;
+
+typedef enum {
+    I2C_0 = (int)I2C1REG_BASE,
+    I2C_1 = (int)I2C2REG_BASE
+} I2CName;
+
+typedef enum {
+    PWM_0 = (int)PWMREG_BASE,
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif