The CMSIS DSP 5 library

Dependents:   Nucleo-Heart-Rate ejercicioVrms2 PROYECTOFINAL ejercicioVrms ... more

Revision:
1:24714b45cd1b
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/functions/MatrixFunctions/arm_mat_scale_q31.c	Wed Jun 20 11:21:31 2018 +0000
@@ -0,0 +1,191 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_mat_scale_q31.c
+ * Description:  Multiplies a Q31 matrix by a scalar
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupMatrix
+ */
+
+/**
+ * @addtogroup MatrixScale
+ * @{
+ */
+
+/**
+ * @brief Q31 matrix scaling.
+ * @param[in]       *pSrc points to input matrix
+ * @param[in]       scaleFract fractional portion of the scale factor
+ * @param[in]       shift number of bits to shift the result by
+ * @param[out]      *pDst points to output matrix structure
+ * @return     		The function returns either
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+ *
+ * @details
+ * <b>Scaling and Overflow Behavior:</b>
+ * \par
+ * The input data <code>*pSrc</code> and <code>scaleFract</code> are in 1.31 format.
+ * These are multiplied to yield a 2.62 intermediate result and this is shifted with saturation to 1.31 format.
+ */
+
+arm_status arm_mat_scale_q31(
+  const arm_matrix_instance_q31 * pSrc,
+  q31_t scaleFract,
+  int32_t shift,
+  arm_matrix_instance_q31 * pDst)
+{
+  q31_t *pIn = pSrc->pData;                      /* input data matrix pointer */
+  q31_t *pOut = pDst->pData;                     /* output data matrix pointer */
+  uint32_t numSamples;                           /* total number of elements in the matrix */
+  int32_t totShift = shift + 1;                  /* shift to apply after scaling */
+  uint32_t blkCnt;                               /* loop counters  */
+  arm_status status;                             /* status of matrix scaling      */
+  q31_t in1, in2, out1;                          /* temporary variabels */
+
+#if defined (ARM_MATH_DSP)
+
+  q31_t in3, in4, out2, out3, out4;              /* temporary variables */
+
+#endif //      #ifndef ARM_MAT_CM0
+
+#ifdef ARM_MATH_MATRIX_CHECK
+  /* Check for matrix mismatch  */
+  if ((pSrc->numRows != pDst->numRows) || (pSrc->numCols != pDst->numCols))
+  {
+    /* Set status as ARM_MATH_SIZE_MISMATCH */
+    status = ARM_MATH_SIZE_MISMATCH;
+  }
+  else
+#endif //    #ifdef ARM_MATH_MATRIX_CHECK
+  {
+    /* Total number of samples in the input matrix */
+    numSamples = (uint32_t) pSrc->numRows * pSrc->numCols;
+
+#if defined (ARM_MATH_DSP)
+
+    /* Run the below code for Cortex-M4 and Cortex-M3 */
+
+    /* Loop Unrolling */
+    blkCnt = numSamples >> 2U;
+
+    /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+     ** a second loop below computes the remaining 1 to 3 samples. */
+    while (blkCnt > 0U)
+    {
+      /* C(m,n) = A(m,n) * k */
+      /* Read values from input */
+      in1 = *pIn;
+      in2 = *(pIn + 1);
+      in3 = *(pIn + 2);
+      in4 = *(pIn + 3);
+
+      /* multiply input with scaler value */
+      in1 = ((q63_t) in1 * scaleFract) >> 32;
+      in2 = ((q63_t) in2 * scaleFract) >> 32;
+      in3 = ((q63_t) in3 * scaleFract) >> 32;
+      in4 = ((q63_t) in4 * scaleFract) >> 32;
+
+      /* apply shifting */
+      out1 = in1 << totShift;
+      out2 = in2 << totShift;
+
+      /* saturate the results. */
+      if (in1 != (out1 >> totShift))
+        out1 = 0x7FFFFFFF ^ (in1 >> 31);
+
+      if (in2 != (out2 >> totShift))
+        out2 = 0x7FFFFFFF ^ (in2 >> 31);
+
+      out3 = in3 << totShift;
+      out4 = in4 << totShift;
+
+      *pOut = out1;
+      *(pOut + 1) = out2;
+
+      if (in3 != (out3 >> totShift))
+        out3 = 0x7FFFFFFF ^ (in3 >> 31);
+
+      if (in4 != (out4 >> totShift))
+        out4 = 0x7FFFFFFF ^ (in4 >> 31);
+
+
+      *(pOut + 2) = out3;
+      *(pOut + 3) = out4;
+
+      /* update pointers to process next sampels */
+      pIn += 4U;
+      pOut += 4U;
+
+
+      /* Decrement the numSamples loop counter */
+      blkCnt--;
+    }
+
+    /* If the numSamples is not a multiple of 4, compute any remaining output samples here.
+     ** No loop unrolling is used. */
+    blkCnt = numSamples % 0x4U;
+
+#else
+
+    /* Run the below code for Cortex-M0 */
+
+    /* Initialize blkCnt with number of samples */
+    blkCnt = numSamples;
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+    while (blkCnt > 0U)
+    {
+      /* C(m,n) = A(m,n) * k */
+      /* Scale, saturate and then store the results in the destination buffer. */
+      in1 = *pIn++;
+
+      in2 = ((q63_t) in1 * scaleFract) >> 32;
+
+      out1 = in2 << totShift;
+
+      if (in2 != (out1 >> totShift))
+        out1 = 0x7FFFFFFF ^ (in2 >> 31);
+
+      *pOut++ = out1;
+
+      /* Decrement the numSamples loop counter */
+      blkCnt--;
+    }
+
+    /* Set status as ARM_MATH_SUCCESS */
+    status = ARM_MATH_SUCCESS;
+  }
+
+  /* Return to application */
+  return (status);
+}
+
+/**
+ * @} end of MatrixScale group
+ */