takuya okada
駆動信号発生器用プログラム
Revision 0:1f4efca8f7dd, committed 2017-03-24
- Comitter:
- woodbed
- Date:
- Fri Mar 24 04:42:17 2017 +0000
- Commit message:
- ???????????
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
| mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
diff -r 000000000000 -r 1f4efca8f7dd main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Mar 24 04:42:17 2017 +0000
@@ -0,0 +1,432 @@
+#include "mbed.h"
+
+int mode = 1; //0＝電気信号発生器 1=駆動信号発生器
+int revision = 1;
+
+//Serial Port Setting
+Serial pc(p13, p14); // シリアルポートのインスタンス
+
+//PWM Port Setting
+PwmOut signal_1(p23);
+PwmOut signal_2(p22);
+PwmOut signal_3(p21);
+
+//Ticker
+Ticker timer;
+
+//Digital Out
+DigitalOut ledch1(LED1);
+
+//cos Wave
+float coswave[256];
+
+//status flug
+int status1 =0; //suatus1 : 0=波形出力停止中, 1=波形出力中
+
+//User set Wave Paramater 初期値
+int sample_dt = 100; //microsec 10kHz
+float hb_carr_freq = 8.7; //Hz
+float hb_mod_freq = 1; //Hz
+float hb_carr_level = 0.06; //min=0 max=0.5 0.5以上ではMOD 50%以上で振幅が飽和する
+float hb_mod_ratio = 60; //0-100 %
+float resp_freq = 0.3; //Hz
+float resp_level = 0.23; //min=0 max=1
+float snore_freq = 150; //Hz
+float snore_level = 0.045; //min=0 max=1
+int snore_oncycle = 10000; //On Time = snore_oncycle * sample_dt, snore_oncycle < snore_allcycle;
+int snore_allcycle = 33333; //OFF Time = (allcycle - oncycle) * sample_dt
+int snore_onoff = 1; //0: ALL Time ON, 1:On Time only
+
+//Set wave paramater
+//HB_carr
+float hb_carr_period = 1000000*1/hb_carr_freq; //microSec
+float hb_carr_n = 0;
+float hb_carr_n_sample = 0; //The maximum number of sampling points in the signal
+float hb_carr_tend = 0; //The remainder of sampling points in the signal
+float hb_carr_tstart = 0; //start offset of sampling time
+float hb_carr_t_samplepoint = 0;
+float hb_carr_table_dt = hb_carr_period/256;
+float hb_carr_n_samplepoint = 0;
+float hb_carr_v_samplepoint = 0;
+
+//HB_mod
+float hb_mod_period = 1000000*1/hb_mod_freq;
+float hb_mod_n = 0;
+float hb_mod_n_sample = 0; //The maximum number of sampling points in the signal
+float hb_mod_tend = 0; //The remainder of sampling points in the signal
+float hb_mod_tstart = 0; //start offset of sampling time
+float hb_mod_t_samplepoint = 0;
+float hb_mod_table_dt = hb_mod_period/256;
+float hb_mod_n_samplepoint = 0;
+float hb_mod_v_samplepoint = 0;
+
+float hb_mod_ra = hb_mod_ratio * 0.01;
+float hb_signal = 0;
+float mod_signal = 0;
+
+//RESP
+float resp_period = 1000000*1/resp_freq; //microSec
+float resp_n = 0;
+float resp_n_sample = 0; //The maximum number of sampling points in the signal
+float resp_tend = 0; //The remainder of sampling points in the signal
+float resp_tstart = 0; //start offset of sampling time
+float resp_t_samplepoint = 0;
+float resp_table_dt = resp_period/256;
+float resp_n_samplepoint = 0;
+float resp_v_samplepoint = 0;
+float resp_signal = 0;
+
+//SNORE Paramater
+float snore_period = 1000000*1/snore_freq; //microSec
+float snore_n = 0;
+float snore_n_sample = 0; //The maximum number of sampling points in the signal
+float snore_tend = 0; //The remainder of sampling points in the signal
+float snore_tstart = 0; //start offset of sampling time
+float snore_t_samplepoint = 0;
+float snore_table_dt = snore_period/256; //2016/12/12 255->256
+float snore_n_samplepoint = 0;
+float snore_v_samplepoint = 0;
+int snore_cycle = 0;
+float snore_signal = 0;
+
+int pwidth_1 = 0;
+int pwidth_2 = 0;
+int pwidth_3 = 0;
+
+// Debug use only ----
+int dbcount = 0;
+
+// End of debug use ----
+
+//Signal Culcurate
+void signal_culc(){
+
+//HB section
+//HB_carr
+ hb_carr_n_sample = (hb_carr_period - hb_carr_tstart) / sample_dt;
+ hb_carr_tend = fmod((hb_carr_period - hb_carr_tstart) , sample_dt);
+ if(hb_carr_tend == 0){
+ hb_carr_n_sample = hb_carr_n_sample-1;
+ }
+ hb_carr_t_samplepoint = hb_carr_tstart + sample_dt * hb_carr_n; //time of sampling point
+ hb_carr_n_samplepoint = hb_carr_t_samplepoint / hb_carr_table_dt;
+ if(hb_carr_n_samplepoint >= 256){
+ hb_carr_n_samplepoint = 0;
+ }
+ hb_carr_v_samplepoint = coswave[(int)hb_carr_n_samplepoint];
+ if(hb_carr_n > (int)hb_carr_n_sample) {
+ hb_carr_n =0;
+ hb_carr_tstart = sample_dt - hb_carr_tend;
+ }
+ else {
+ hb_carr_n++;
+ }
+//HB_mod
+//A(1+macosωmt)*cosωct Acosωct = fcarr(t),ma = modulation ratio,
+ hb_mod_n_sample = (hb_mod_period - hb_mod_tstart) / sample_dt;
+ hb_mod_tend = fmod((hb_mod_period - hb_mod_tstart) , sample_dt);
+ if(hb_mod_tend == 0){
+ hb_mod_n_sample = hb_mod_n_sample-1;
+ }
+ hb_mod_t_samplepoint = hb_mod_tstart + sample_dt * hb_mod_n; //time of sampling point
+ hb_mod_n_samplepoint = hb_mod_t_samplepoint / hb_mod_table_dt;
+ if(hb_mod_n_samplepoint >= 256){
+ hb_mod_n_samplepoint = 0;
+ }
+ hb_mod_v_samplepoint = hb_mod_ra*(coswave[(int)hb_mod_n_samplepoint]);
+ if(hb_mod_n > (int)hb_mod_n_sample) {
+ hb_mod_n =0;
+ hb_mod_tstart = sample_dt - hb_mod_tend;
+ }
+ else {
+ hb_mod_n++;
+ }
+
+//HB_AM MOD
+
+ hb_signal = 0.5*(hb_carr_level*(1+hb_mod_v_samplepoint)*hb_carr_v_samplepoint)+0.5;//0-1 -> 0V-3.3V
+
+//debug part
+/*
+ if(dbcount>=100){
+ pc.printf("%f, %f, %f\n",hb_signal,mod_signal,hb_mod_v_samplepoint);
+ dbcount = 0;
+ }
+ dbcount++;
+*/
+//end debug part
+
+//RESP section
+ resp_n_sample = (resp_period - resp_tstart) / sample_dt;
+ resp_tend = fmod((resp_period - resp_tstart) , sample_dt);
+ if(resp_tend == 0){
+ resp_n_sample = resp_n_sample-1;
+ }
+ resp_t_samplepoint = resp_tstart + sample_dt * resp_n; //time of sampling point
+ resp_n_samplepoint = resp_t_samplepoint / resp_table_dt;
+ if(resp_n_samplepoint >= 256){
+ resp_n_samplepoint = 0;
+ }
+ resp_v_samplepoint = resp_level*(coswave[(int)resp_n_samplepoint]);
+ resp_signal = 0.5*resp_v_samplepoint+0.5; //0-1 -> 0V-3.3V
+ if(resp_n > (int)resp_n_sample) {
+ resp_n =0;
+ resp_tstart = sample_dt - resp_tend;
+ }
+ else {
+ resp_n++;
+ }
+
+//SNORE section
+ snore_n_sample = (snore_period - snore_tstart) / sample_dt; //
+ snore_tend = fmod((snore_period - snore_tstart) , sample_dt);
+ if(snore_tend == 0){
+ snore_n_sample = snore_n_sample-1;
+ }
+ else {
+ }
+ snore_t_samplepoint = snore_tstart + sample_dt * snore_n; //time of sampling point
+ snore_n_samplepoint = snore_t_samplepoint / snore_table_dt;
+ if(snore_n_samplepoint >= 256){
+ snore_n_samplepoint = 0;
+ }
+ snore_v_samplepoint = snore_level*(coswave[(int)snore_n_samplepoint]);
+ if(snore_n > (int)snore_n_sample) {
+ snore_n =0; //2016/12/12 1->0
+ snore_tstart = sample_dt - snore_tend;
+ }
+ else {
+ snore_n++;
+ }
+ if(snore_onoff==0){
+ }
+ else if(snore_onoff==1){
+ if (snore_cycle <= snore_oncycle) {
+ snore_cycle++;
+ }
+ else if (snore_cycle>snore_oncycle && snore_cycle <= snore_allcycle){
+ snore_v_samplepoint = 0;
+ snore_cycle++;
+ }
+ else {
+ snore_cycle = 0;
+ }
+ }
+ snore_signal = 0.5*snore_v_samplepoint+0.5; //0-1 -> 0V-3.3V
+
+//PWM Output Pulse width
+ pwidth_1 = hb_signal * sample_dt;
+ pwidth_2 = resp_signal * sample_dt;
+ pwidth_3 = snore_signal * sample_dt;
+
+ signal_1.pulsewidth_us(pwidth_1);
+ signal_2.pulsewidth_us(pwidth_2);
+ signal_3.pulsewidth_us(pwidth_3);
+}
+
+//チッカー割り込みハンドラ
+void attime(){
+ if(status1==1){
+ ledch1=0;
+ signal_culc();
+ }
+ else{
+ ledch1=!ledch1;
+ }
+ }
+
+//Serial 受信割り込みハンドラ
+void isrRx() {
+
+ /* UART受信コマンド
+ start: 波形出力スタート
+ stop: 波形出力ストップ
+ St: 割り込み周期[μsec]
+ carrf: 脈波AM変調波搬送波周波数[Hz]
+ modf: 脈波AM変調波変調周波数[Hz]
+ carrl: 脈波振幅
+ modr: 脈波変調波変調率[%]
+ respf: 呼吸周波数[Hz]
+ respl: 呼吸振幅
+ snorf: 体動・イビキ周波数[Hz]
+ snorl: 体動・イビキ振幅
+ snon: 体動・イビキONサイクル
+ snall: 体動・イビキALLサイクル
+ sncn: 体動・イビキ断続制御
+ */
+
+ char scan[10];
+ float para;
+
+ pc.scanf("%s",scan); // 文字列受信バッファより取り出し
+// pc.printf("read = %s\n",scan);
+
+ if(strcmp(scan,"start")==0){
+ pc.printf("go\n");
+ status1=1; //波形出力状態へ遷移
+ }
+ else if(strcmp(scan,"stop")==0){
+ pc.printf("end\n");
+ status1=0; //波形出力停止へ遷移
+ }
+ else if(strcmp(scan,"dt")==0){
+ pc.scanf("%f",¶);
+ sample_dt = para;
+ pc.printf("dt = %f\n",sample_dt);
+ }
+ else if(strcmp(scan,"carrf")==0){
+ pc.scanf("%f",¶);
+ hb_carr_freq = para;
+ hb_carr_period = 1000000*1/hb_carr_freq; //microSec
+ hb_carr_n = 0;
+ hb_carr_n_sample = 0; //The maximum number of sampling points in the signal
+ hb_carr_tend = 0; //The remainder of sampling points in the signal
+ hb_carr_tstart = 0; //start offset of sampling time
+ hb_carr_t_samplepoint = 0;
+ hb_carr_table_dt = hb_carr_period/256;
+ hb_carr_n_samplepoint = 0;
+ hb_carr_v_samplepoint = 0;
+ pc.printf("carrf = %f\n",hb_carr_freq);
+ hb_mod_period = 1000000*1/hb_mod_freq;
+ hb_mod_n = 0;
+ hb_mod_n_sample = 0; //The maximum number of sampling points in the signal
+ hb_mod_tend = 0; //The remainder of sampling points in the signal
+ hb_mod_tstart = 0; //start offset of sampling time
+ hb_mod_t_samplepoint = 0;
+ hb_mod_table_dt = hb_mod_period/256;
+ hb_mod_n_samplepoint = 0;
+ hb_mod_v_samplepoint = 0;
+ }
+ else if(strcmp(scan,"modf")==0){
+ pc.scanf("%f",¶);
+ hb_mod_freq = para;
+ hb_mod_period = 1000000*1/hb_mod_freq;
+ hb_mod_n = 0;
+ hb_mod_n_sample = 0; //The maximum number of sampling points in the signal
+ hb_mod_tend = 0; //The remainder of sampling points in the signal
+ hb_mod_tstart = 0; //start offset of sampling time
+ hb_mod_t_samplepoint = 0;
+ hb_mod_table_dt = hb_mod_period/256;
+ hb_mod_n_samplepoint = 0;
+ hb_mod_v_samplepoint = 0;
+ pc.printf("modf = %f\n",hb_mod_freq);
+ hb_carr_n = 0;
+ hb_carr_n_sample = 0; //The maximum number of sampling points in the signal
+ hb_carr_tend = 0; //The remainder of sampling points in the signal
+ hb_carr_tstart = 0; //start offset of sampling time
+ hb_carr_t_samplepoint = 0;
+ hb_carr_table_dt = hb_carr_period/256;
+ hb_carr_n_samplepoint = 0;
+ hb_carr_v_samplepoint = 0;
+ }
+ else if(strcmp(scan,"carrl")==0){
+ pc.scanf("%f",¶);
+ hb_carr_level = para;
+ pc.printf("carrl = %f\n",hb_carr_level);
+ }
+ else if(strcmp(scan,"modr")==0){
+ pc.scanf("%f",¶);
+ hb_mod_ratio = para;
+ hb_mod_ra = hb_mod_ratio *0.01;
+ pc.printf("modr = %f\n",hb_mod_ra);
+ }
+ else if(strcmp(scan,"respf")==0){
+ pc.scanf("%f",¶);
+ resp_freq = para;
+ resp_period = 1000000*1/resp_freq;//microSec
+ resp_n = 0;
+ resp_n_sample = 0; //The maximum number of sampling points in the signal
+ resp_tend = 0; //The remainder of sampling points in the signal
+ resp_tstart = 0; //start offset of sampling time
+ resp_t_samplepoint = 0;
+ resp_table_dt = resp_period/256;
+ resp_n_samplepoint = 0;
+ resp_v_samplepoint = 0;
+ pc.printf("respf = %f\n",resp_freq);
+ }
+ else if(strcmp(scan,"respl")==0){
+ pc.scanf("%f",¶);
+ resp_level = para;
+ pc.printf("respl = %f\n",resp_level);
+ }
+ else if(strcmp(scan,"snorf")==0){
+ pc.scanf("%f",¶);
+ snore_freq = para;
+ snore_period = 1000000*1/snore_freq; //microSec
+ snore_n = 0; //2016/12/12 1->0
+ snore_n_sample = 0; //The maximum number of sampling points in the signal
+ snore_tend = 0; //The remainder of sampling points in the signal
+ snore_tstart = 0; //start offset of sampling time
+ snore_t_samplepoint = 0;
+ snore_table_dt = snore_period/256;
+ snore_n_samplepoint = 0;
+ snore_v_samplepoint = 0;
+ snore_cycle = 0;
+ pc.printf("snorf = %f\n",snore_freq);
+ }
+ else if(strcmp(scan,"snorl")==0){
+ pc.scanf("%f",¶);
+ snore_level = para;
+ pc.printf("snorl = %f\n",snore_level);
+ }
+ else if(strcmp(scan,"snon")==0){
+ pc.scanf("%f",¶);
+ snore_oncycle = (int)para;
+ pc.printf("snon = %d\n",snore_oncycle);
+ }
+ else if(strcmp(scan,"snall")==0){
+ pc.scanf("%f",¶);
+ snore_allcycle = (int)para;
+ pc.printf("snall = %d\n",snore_allcycle);
+ }
+ else if(strcmp(scan,"sncn")==0){
+ pc.scanf("%f",¶);
+ snore_onoff = (int)para;
+ pc.printf("sncn = %d\n",snore_onoff);
+ }
+ else if(strcmp(scan,"ack")==0){
+ pc.printf("carrf = %f\n",hb_carr_freq);
+ pc.printf("carrl = %f\n",hb_carr_level);
+ pc.printf("modf = %f\n",hb_mod_freq);
+ pc.printf("modr = %f\n",hb_mod_ra);
+ pc.printf("respf = %f\n",resp_freq);
+ pc.printf("respl = %f\n",resp_level);
+ pc.printf("snorf = %f\n",snore_freq);
+ pc.printf("snorl = %f\n",snore_level);
+ pc.printf("snon = %d\n",snore_oncycle);
+ pc.printf("snall = %d\n",snore_allcycle);
+ pc.printf("sncn = %d\n",snore_onoff);
+ }
+ else if(strcmp(scan,"mr")==0){
+ pc.printf("mode = %d\n",mode);
+ pc.printf("revision = %d\n",revision);
+ }
+ else {
+ pc.printf("Command Error\n");
+ }
+}
+
+int main() {
+ pc.printf("Start Up\n");
+
+//Make cos wave
+ int i;
+ for(i=0;i<=255;i++){
+ coswave[i]=cos(2.0*3.1415*i/256); //2017/1/5 0.5*(cos(2.0*3.1415*i/256));
+ }
+ i = 0;
+
+ signal_1.period_us(sample_dt); //Pulse_cycle = 100usec = 10kHz
+ signal_2.period_us(sample_dt);
+ signal_3.period_us(sample_dt);
+
+ int j;
+ j = sample_dt;
+ timer.attach_us(&attime,j); //⇒UART割り込み”START”に移動
+
+ pc.attach(isrRx, Serial::RxIrq); // 割込みハンドラ登録
+ NVIC_SetPriority(UART1_IRQn,1);
+
+ while(1) {
+ }
+}
diff -r 000000000000 -r 1f4efca8f7dd mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Mar 24 04:42:17 2017 +0000 @@ -0,0 +1,1 @@ +https://mbed.org/users/mbed_official/code/mbed/builds/093f2bd7b9eb \ No newline at end of file