Diff: LC75711.h

Revision:

0:5eb5fee234e8

Child:

1:bcf010fcacae

diff -r 000000000000 -r 5eb5fee234e8 LC75711.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LC75711.h	Tue Sep 12 18:36:56 2017 +0000
@@ -0,0 +1,618 @@
+/* mbed LC75710 Library, for Sanyo LC7571X VFD controller
+ * Note: The LC75710, LC75711 and LC75712 differ only in the built-in character ROM
+ *
+ * Copyright (c) 2017, v01: WH, Initial version
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef LC75711_H
+#define LC75711_H
+
+// Select one of the testboards for Sanyo LC75711 VFD controller
+#include "LC75711_Config.h"
+#include "LC75711_UDC.h"
+
+/** An interface for driving Sanyo LC75711 VFD controller
+ *
+ * @code
+ *
+ * #if (LC75711_TEST == 1)  
+ * // Direct driving of LC75711 Test
+ *
+ * #include "mbed.h"
+ * #include "LC75711.h" 
+ *
+ * DigitalOut myled(LED1);
+ * Serial pc(USBTX, USBRX);
+ * 
+ * // LC75711 declaration, Default setting 16 Grids @ 35 Segments
+ * LC75711 LC75711(p5, p7, p8); // DI, CLK, CS
+ *
+ * int main() {
+ *   pc.printf("Hello World: LC75711 test\n\r");
+ *
+ *   LC75711.cls(); 
+ *   LC75711.writeData(all_str);
+ *   wait(4);
+ *   LC75711.setBrightness(LC75711_BRT0);
+ *   wait(1);
+ *   LC75711.setBrightness(LC75711_BRT3);
+ *
+ *   LC75711.writeData((char)'H', 9);
+ *   LC75711.writeData((char)'e', 8);
+ *   LC75711.writeData((char)'l', 7);
+ *   LC75711.writeData((char)'l', 6);
+ *   LC75711.writeData((char)'o', 5);
+ *           
+ *   while(1) {
+ *     myled = !myled;
+ *     wait(1);
+ *   }
+ * }
+ * #endif
+ *
+ * @endcode
+ */
+
+
+//LC75711 Display and Annunciator data
+#define LC75711_MAX_NR_GRIDS   16
+#define LC75711_BYTES_PER_GRID  1
+
+//Memory size in bytes for Display and Annunciators
+#define LC75711_DISPLAY_MEM    64
+#define LC75711_ADD_MEM        16
+//#define LC75711_UDC_MEM       8
+
+//Serial control data consists of an 8-bit address and a 24-bit instruction. The address is used as a chip select function 
+//when multiple ICs are connected to the same bus. The address for the LC75710NE series is only used to distinguish the device
+//from different types of devices. Multiple LC75711 devices on the same bus can only be distinguised by the CE control.
+//Note that the serial control is similar but not identical to SPI behaviour: 
+// The address is transmitted during CE low, the command & data is latched on falling CE edge.
+// A wait time must be observed after each command. Typical delay is 18 us.
+//Address (LSB sent first)
+#define LC75711_ADDRESS      0x67
+
+
+//
+//Blink command, allows individual digit control
+// 1 0 1 M A BC2 BC1 BC0 GR16 ... GR1
+#define LC75711_BLNK_REG     0xA0
+#define LC75711_BLNK_MA_MSK  0x18
+#define LC75711_BLNK_BC_MSK  0x07
+
+//Blinking Mode
+// M A Display operating state
+// 0 0 Neither MDATA nor ADATA blinks.
+// 0 1 Only ADATA blinks.
+// 1 0 Only MDATA blinks.
+// 1 1 Both ADATA and MDATA blink.
+
+//Blinking Period in sec when fOSC is 2.7 MHz
+// BC2 BC1 BC0 HEX
+// 0   0   0   0   Blink operation is stopped.
+// 0   0   1   1   0.1
+// 0   1   0   2   0.2
+// 0   1   1   3   0.3
+// 1   0   0   4   0.4
+// 1   0   1   5   0.5
+// 1   1   0   6   0.8
+// 1   1   1   7   1.0
+#define LC75711_BLNK_00      0x00
+#define LC75711_BLNK_01      0x01
+#define LC75711_BLNK_02      0x02
+#define LC75711_BLNK_03      0x03
+#define LC75711_BLNK_04      0x04
+#define LC75711_BLNK_05      0x05
+#define LC75711_BLNK_08      0x06
+#define LC75711_BLNK_10      0x07
+
+#define LC75711_BLNK_ON      (LC75711_BLNK_MA_MSK | LC75711_BLNK_08)
+#define LC75711_BLNK_OFF     (LC75711_BLNK_MA_MSK | LC75711_BLNK_00)
+
+//Grid selectors
+#define LC75711_GR1     (1 <<  0)
+#define LC75711_GR2     (1 <<  1)
+#define LC75711_GR3     (1 <<  2)
+#define LC75711_GR4     (1 <<  3)
+#define LC75711_GR5     (1 <<  4)
+#define LC75711_GR6     (1 <<  5)
+#define LC75711_GR7     (1 <<  6)
+#define LC75711_GR8     (1 <<  7)
+#define LC75711_GR9     (1 <<  8)
+#define LC75711_GR10    (1 <<  9)
+#define LC75711_GR11    (1 << 10)
+#define LC75711_GR12    (1 << 11)
+#define LC75711_GR13    (1 << 12)
+#define LC75711_GR14    (1 << 13)
+#define LC75711_GR15    (1 << 14)
+#define LC75711_GR16    (1 << 15)
+
+#define LC75711_GR_ALL   (0xFFFF)
+#define LC75711_GR_MSK   (0xFFFF)
+
+//Blinking Command delay
+#define LC75711_BLNK_DLY       18
+
+//
+//Display On/Off command, allows individual digit control
+// 0 0 0 1 * M A O GR16 ... GRD1
+#define LC75711_DSPL_REG     0x10
+#define LC75711_DSPL_MA_MSK  0x06
+#define LC75711_DSPL_O_MSK   0x01
+
+//On/Off Mode
+// M A Display operating state
+// 0 0 Both MDATA and ADATA off
+// 0 1 Only ADATA on
+// 1 0 Only MDATA on
+// 1 1 Both ADATA and MDATA on
+
+//On/Off
+// O Display state
+// 0 Off
+// 1 On
+
+#define LC75711_DSPL_ON      (LC75711_DSPL_MA_MSK | LC75711_DSPL_O_MSK)
+#define LC75711_DSPL_OFF     (LC75711_DSPL_MA_MSK)
+
+//Display Command delay
+#define LC75711_DSPL_DLY       18
+
+
+//Display shift is NOT USED
+// This would screw up the correlation between column index and character position.
+// It also screws up the correlation between character data and additional data.
+// Note that chardata has 64 positions whereas adddata has 16 positions
+
+//
+//Display shift command
+// 0 0 1 0 * M A R/L ...
+#define LC75711_SHFT_REG     0x20
+#define LC75711_SHFT_MA_MSK  0x06
+#define LC75711_SHFT_RL_MSK  0x01
+
+// Shift Mode
+// M A Display operating state
+// 0 0 Neither MDATA and ADATA shift
+// 0 1 Only ADATA 
+// 1 0 Only MDATA 
+// 1 1 Both ADATA and MDATA
+
+//Shift direction
+// RL Display shift
+// 0 Right 
+// 1 Left
+
+//Shift Command delay
+#define LC75711_SHFT_DLY       18
+
+//
+//Grid control command
+// 0 0 1 1 GN3 GN2 GN1 GN0 ...
+#define LC75711_GRID_REG     0x30
+#define LC75711_GRID_MSK     0x0F
+
+//Grids
+//
+// GN3 GN2 GN1 GN0
+//  0   0   0   0   G1 to G16
+//  0   0   0   1   G1
+//  0   0   1   0   G1 to G2
+//  0   0   1   1   G1 to G3
+//  0   1   0   0   G1 to G4
+//  0   1   0   1   G1 to G5
+//  0   1   1   0   G1 to G6
+//  0   1   1   1   G1 to G7
+//  1   0   0   0   G1 to G8
+//  1   0   0   1   G1 to G9
+//  1   0   1   0   G1 to G10
+//  1   0   1   1   G1 to G11
+//  1   1   0   0   G1 to G12
+//  1   1   0   1   G1 to G13
+//  1   1   1   0   G1 to G14
+//  1   1   1   1   G1 to G15
+#define LC75711_GR1_GR1   0x01
+#define LC75711_GR1_GR2   0x02
+#define LC75711_GR1_GR3   0x03
+#define LC75711_GR1_GR4   0x04
+#define LC75711_GR1_GR5   0x05
+#define LC75711_GR1_GR6   0x06
+#define LC75711_GR1_GR7   0x07
+#define LC75711_GR1_GR8   0x08
+#define LC75711_GR1_GR9   0x09
+#define LC75711_GR1_GR10  0x0A
+#define LC75711_GR1_GR11  0x0B
+#define LC75711_GR1_GR12  0x0C
+#define LC75711_GR1_GR13  0x0D
+#define LC75711_GR1_GR14  0x0E
+#define LC75711_GR1_GR15  0x0F
+#define LC75711_GR1_GR16  0x00
+
+//Grid Command delay
+#define LC75711_GRID_DLY        1
+
+//
+//Set AC Address command
+// 0 1 0 0 RA3 RA2 RA1 RA0 * * DA5 DA4 DA3 DA2 DA1 DA0 * * * * * * * *
+#define LC75711_AC_REG       0x40
+#define LC75711_AADR_MSK     0x0F
+#define LC75711_DADR_MSK     0x3F
+
+//RA3..RA0 ADRAM Address (Additional data)
+//DA5..DA0 DCRAM Address (Character data)
+
+//AC Command delay
+#define LC75711_AC_DLY         18
+
+//
+//Set Brightness command
+// 0 1 0 1 * * * * DC7 DC6 DC5 DC4 DC3 DC2 DC1 DC0 * * * * * * * *
+#define LC75711_BRT_REG      0x50
+#define LC75711_BRT_MSK      0xFF
+
+//DC7..DC0 Brightness Level (0..239)
+//Note Brightness relationship between the number of active Grids (period) and the BRT value (duty cycle)
+#define LC75711_BRT_0        0x00
+#define LC75711_BRT_1        0x20
+#define LC75711_BRT_2        0x40
+#define LC75711_BRT_3        0x80
+#define LC75711_BRT_4        0xA0
+#define LC75711_BRT_5        0xC0
+#define LC75711_BRT_6        0xD0
+#define LC75711_BRT_7        0xF0
+
+#define LC75711_BRT_DEF      (LC75711_BRT_3)
+
+//Brightness Command delay
+#define LC75711_BRT_DLY         1
+
+//
+//Set Char data command (DCRAM)
+// 0 1 1 0 * * * * * * DA5 DA4 DA3 DA2 DA1 DA0 D7...D0
+#define LC75711_DATA_REG     0x60
+//#define LC75711_DADR_MSK     0x3F
+//#define LC75711_DATA_MSK     0xFF
+
+//AA5..DA0 DCRAM Address (Character data)
+//DA7..DA0 Character Data
+
+//Set Data Command delay
+#define LC75711_DATA_DLY        18
+
+//
+//Set Additional data command (ADRAM), Used for annunciators etc
+// 0 1 1 1 RA3 RA2 RA1 RA0 AD8 AD7 AD6 AD5 AD4 AD3 AD2 AD1 * * * * * * * *
+#define LC75711_ADAT_REG      0x70
+
+//RA3..RA0 ADRAM Address (Additional data)
+//#define LC75711_AADR_MSK       0x0F
+
+//AD8..AD1 Additional Data
+#define LC75711_ADAT_MSK      0xFF
+
+//Set AData Command delay
+#define LC75711_ADAT_DLY        18
+
+//
+//Set UDC data command (CGRAM)
+// 1 0 0 0 * * * * CA7 CA6 ... CA0
+//
+// * * * * * CD35 CD34 ...    CD25
+//
+// CD24 CD23 ...               CD9
+//
+// CD8 ...      CD1
+#define LC75711_UDC_REG        0x80
+#define LC75711_UDC_MSK        0x0F
+#define LC75711_NR_UDC            8
+
+//CA7..CA0 CGRAM Address (UDC RAM address)
+//CD35..CD0 UDC Data
+//UDC is a 5x7 Matrix pattern
+// CD1  .. CD5
+// CD6  .. CD10
+// CD11 .. CD15
+// CD16 .. CD20
+// CD21 .. CD25
+// CD26 .. CD30
+// CD31 .. CD35
+
+//Set UDC Data Command delay
+#define LC75711_UDC_DLY          18
+
+//UDCs are defined by a 5x7 matrix and stored as 7 bytes
+typedef char UDCData_t[7];
+
+
+/** A class for driving Sanyo LC75711 VFD controller
+ *
+ * @brief Supports upto 16 Grids of 35 matrix segments. Also supports 3-8 additional segments (depending on number of grids).
+ *        SPI bus interface device. 
+ */
+class LC75711 {
+ public:
+
+  /** Enums for display mode */
+  enum Mode {
+    Grid1_Add8  = LC75711_GR1_GR1,
+    Grid2_Add8  = LC75711_GR1_GR2,
+    Grid3_Add8  = LC75711_GR1_GR3,
+    Grid4_Add8  = LC75711_GR1_GR4,
+    Grid5_Add8  = LC75711_GR1_GR5,
+    Grid6_Add8  = LC75711_GR1_GR6,
+    Grid7_Add8  = LC75711_GR1_GR7,
+    Grid8_Add8  = LC75711_GR1_GR8,
+    Grid9_Add8  = LC75711_GR1_GR9,
+    Grid10_Add8 = LC75711_GR1_GR10,
+    Grid11_Add8 = LC75711_GR1_GR11,
+    Grid12_Add7 = LC75711_GR1_GR12,
+    Grid13_Add6 = LC75711_GR1_GR13,
+    Grid14_Add5 = LC75711_GR1_GR14,
+    Grid15_Add4 = LC75711_GR1_GR15,
+    Grid16_Add3 = LC75711_GR1_GR16
+  };
+ 
+ /** Datatypes for display data */
+//  typedef char DisplayData_t[LC75711_DISPLAY_MEM];
+//  typedef char DisplayAdd_t[LC75711_ADD_MEM];  
+    
+ /** Constructor for class for driving Sanyo LC75711 VFD controller
+  *
+  * @brief Supports upto 16 Grids of 35 matrix segments. Also supports 3-8 additional segments (depending on number of grids).
+  *        SPI bus interface device. 
+  *  @param  PinName mosi, sclk, cs SPI bus pins
+  *  @param  Mode selects number of Grids and Segments (default 11 Grids, 35 matrix segments, 8 additional segments)
+  */
+  LC75711(PinName mosi, PinName sclk, PinName cs, Mode mode = Grid11_Add8);
+      
+  /** Clear the screen and locate to 0
+   */ 
+  void cls();  
+
+  /** Set the Blink mode
+    *
+    * @param bool blink mode
+    * @param int  grids selected grids for Blinking enable/disable (default = all)
+    */
+  void setBlink(bool on, int grids = LC75711_GR_ALL);
+  
+  /** Set Brightness
+    *
+    * @param  char brightness (8 significant bits, valid range 0..239 (dutycycle linked to number of grids)  
+    * @return none
+    */    
+  void setBrightness(char brightness = LC75711_BRT_DEF);
+  
+  /** Set the Display mode On/off
+    *
+    * @param bool display mode
+    */
+  void setDisplay(bool on);
+
+
+  /** Set User Defined Characters (UDC)
+    *
+    * @param unsigned char udc_idx   The Index of the UDC (0..7)
+    * @param UDCData_t udc_data      The bitpattern for the UDC (7 bytes)       
+    */
+  void setUDC(unsigned char udc_idx, UDCData_t udc_data);
+
+ 
+ /** Write Data to LC75711
+    *  @Param char data Character code
+    *  @Param char address Parameter for data
+    *  @return none
+    */  
+  void writeData(char data, char address);
+
+  /** Write Additional Data to LC75711
+    *  @Param char adata Additional code (annunciator)
+    *  @Param char address Parameter for data
+    *  @return none
+    */  
+  void writeAData(char adata, char address);
+ 
+  
+ private:  
+  SPI _spi;
+  DigitalOut _cs;
+  Mode _mode;
+  int _blink; // Local shadow
+    
+  /** Init the SPI interface and the controller
+    * @param  none
+    * @return none
+    */ 
+  void _init();
+
+  /** Helper to reverse all command or databits. The LC75711 expects LSB first, whereas SPI is MSB first
+    *  @param  char data
+    *  @return bitreversed data
+    */ 
+  char _flip(char data);
+
+
+  /** Set Address
+    *  @Param char RAM address for data displayed at Grid1 (0..63)
+    *  @Param char RAM address for adata displayed at Grid1 (0..15) 
+    *  @return none
+    *
+    * Note that a Shift (L/R) command will change the Address of data displayed at Grid1
+    */  
+  void _setAddress(char data_addr=0, char adata_addr=0);
+
+
+  /** Write command and parameters to LC75711
+    *  @Param char cmd Command byte
+    *  @Param char data1 Parameters for command
+    *  @Param char data0 Parameters for command  
+    *  @Param char delay Delay for command execution
+    *  @return none
+    */  
+  void _writeCmd(char cmd, char data1, char data0, char delay);
+ 
+};
+
+
+#if (ASTON_TEST == 1)
+// Derived class for ASTON display unit
+//   Grids 1-10 all display 35 segment matrix characters and no Additional segments.
+//   Grid  11 uses a number of Segments to display Icons. 
+
+//ASTON Display data
+#define ASTON_NR_GRIDS  10
+#define ASTON_NR_DIGITS 10
+//#define ASTON_NR_UDC    8
+
+//ASTON Memory size in bytes for Display
+//#define ASTON_DISPLAY_MEM (ASTON_NR_GRIDS * LC75711_BYTES_PER_GRID)
+
+
+/** Constructor for class for driving Sanyo LC75711 VFD controller as used in ASTON
+  *
+  *  @brief Supports 10 Grids of 35 Segments without additional Segments and uses Grid 11 for Icon segments.
+  *  
+  *  @param  PinName mosi, sclk, cs SPI bus pins
+  */
+class LC75711_ASTON : public LC75711, public Stream {
+ public:
+
+  /** Enums for Icons
+   *
+   *  @Brief Aston display uses Grid 11 to show Icons.
+   *         The Icons are each connnected to one of the 35 segments. 
+   *         Icons are controlled by redefining UDC_0. 
+   *  Icon Enums encode UDC_0 byte index in 8 MSBs and encode Icon bit/segment in 8 LSBs
+   */
+  enum Icon {
+    R0    = (6<<8) | 4,
+    R1    = (6<<8) | 3,
+    R2    = (6<<8) | 2,
+    R3    = (6<<8) | 1,
+    CRD1  = (5<<8) | 4,
+    CRD2  = (5<<8) | 3,
+    CARD  = (5<<8) | 2,
+    KEY   = (4<<8) | 1,
+    VDCRP = (4<<8) | 2,
+    D     = (4<<8) | 0,
+    D2    = (3<<8) | 4,
+    MAC   = (3<<8) | 3,
+    R16_9 = (0<<8) | 0,
+    DISH  = (5<<8) | 0,     
+    DSH1  = (4<<8) | 3,
+    DSH2  = (5<<8) | 1,
+    TMR   = (1<<8) | 3,
+    CBND  = (2<<8) | 1,
+    KBND  = (2<<8) | 4,
+    AFC   = (3<<8) | 0
+  };
+  
+
+/** Constructor for class for driving Sanyo LC75711 VFD controller as used in ASTON
+  *
+  *  @brief Supports 10 Grids of 35 Segments without additional Segments and uses Grid 11 for Icon segments.
+  *  
+  *  @param  PinName mosi, sclk, cs SPI bus pins
+  */
+  LC75711_ASTON(PinName mosi, PinName sclk, PinName cs);
+
+#if DOXYGEN_ONLY
+    /** Write a character to the Display
+     *
+     * @param c The character to write to the display
+     */
+    int putc(int c);
+
+    /** Write a formatted string to the Display
+     *
+     * @param format A printf-style format string, followed by the
+     *               variables to use in formatting the string.
+     */
+    int printf(const char* format, ...);   
+#endif
+
+     /** Locate cursor to a screen column
+     *
+     * @param column  The horizontal position from the left, indexed from 0
+     */
+    void locate(int column);
+    
+    /** Clear the screen and locate to 0
+     * @param bool clrAll Clear Icons also (default = false)
+     */
+    void cls(bool clrAll = false);
+
+    /** Set Icon
+     *
+     * @param Icon Enums Icon Encodes UDC_0 byte index in 8 MSBs and encodes Icon bit/segment in 8 LSBs
+     * @return none
+     */
+    void setIcon(Icon icon);
+
+    /** Clr Icon
+     *
+     * @param Icon Enums Icon Encodes UDC_0 byte index in 8 MSBs and encodes Icon bit/segment in 8 LSBs     
+     * @return none
+     */
+    void clrIcon(Icon icon);
+
+
+   /** Number of screen columns
+    *
+    * @param none
+    * @return columns
+    */
+    int columns();   
+
+   /** Write databyte to LC75711
+     *  @param  int address display memory location to write byte
+     *  @param  char data byte written at given address
+     *  @return none
+     */ 
+//    void writeData(int address, char data){
+//      LC75711::writeData(address, data);
+//    }        
+ 
+   /** Write Display datablock to LC75711
+    *  @param  DisplayData_t data Array of LC75711_DISPLAY_MEM (=48) bytes for displaydata (starting at address 0)
+    *  @param  length number bytes to write (valid range 0..(ASTON_NR_GRIDS * LC75711_BYTES_PER_GRID) == 36, starting at address 0)   
+    *  @return none
+    */   
+//    void writeData(DisplayData_t data, int length = (ASTON_NR_GRIDS * LC75711_BYTES_PER_GRID)) {
+//      LC75711::writeData(data, length);
+//    }  
+
+protected:  
+    // Stream implementation functions
+    virtual int _putc(int value);
+    virtual int _getc();
+
+private:
+    int _column;                     // Current cursor location
+    int _columns;                    // Max number of columns
+    
+//    DisplayData_t _displaybuffer;    // Local mirror for all chars and icons
+//    UDCData_t _UDC_16S;              // User Defined Character pattterns (UDC)
+    UDCData_t _udc_icon;             // The UDC_0 bitpattern for the Icons shown at Grid 11 (7 bytes)    
+};
+#endif
+
+#endif
\ No newline at end of file