mbed TLS Build

Dependents:   Slave-prot-prod

Revision:
0:cdf462088d13
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/mbedtls/camellia.h	Thu Jan 05 00:18:44 2017 +0000
@@ -0,0 +1,235 @@
+/**
+ * \file camellia.h
+ *
+ * \brief Camellia block cipher
+ *
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_CAMELLIA_H
+#define MBEDTLS_CAMELLIA_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+#include <stdint.h>
+
+#define MBEDTLS_CAMELLIA_ENCRYPT     1
+#define MBEDTLS_CAMELLIA_DECRYPT     0
+
+#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH           -0x0024  /**< Invalid key length. */
+#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH         -0x0026  /**< Invalid data input length. */
+
+#if !defined(MBEDTLS_CAMELLIA_ALT)
+// Regular implementation
+//
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          CAMELLIA context structure
+ */
+typedef struct
+{
+    int nr;                     /*!<  number of rounds  */
+    uint32_t rk[68];            /*!<  CAMELLIA round keys    */
+}
+mbedtls_camellia_context;
+
+/**
+ * \brief          Initialize CAMELLIA context
+ *
+ * \param ctx      CAMELLIA context to be initialized
+ */
+void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
+
+/**
+ * \brief          Clear CAMELLIA context
+ *
+ * \param ctx      CAMELLIA context to be cleared
+ */
+void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
+
+/**
+ * \brief          CAMELLIA key schedule (encryption)
+ *
+ * \param ctx      CAMELLIA context to be initialized
+ * \param key      encryption key
+ * \param keybits  must be 128, 192 or 256
+ *
+ * \return         0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ */
+int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
+                         unsigned int keybits );
+
+/**
+ * \brief          CAMELLIA key schedule (decryption)
+ *
+ * \param ctx      CAMELLIA context to be initialized
+ * \param key      decryption key
+ * \param keybits  must be 128, 192 or 256
+ *
+ * \return         0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ */
+int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
+                         unsigned int keybits );
+
+/**
+ * \brief          CAMELLIA-ECB block encryption/decryption
+ *
+ * \param ctx      CAMELLIA context
+ * \param mode     MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
+ * \param input    16-byte input block
+ * \param output   16-byte output block
+ *
+ * \return         0 if successful
+ */
+int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
+                    int mode,
+                    const unsigned char input[16],
+                    unsigned char output[16] );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+/**
+ * \brief          CAMELLIA-CBC buffer encryption/decryption
+ *                 Length should be a multiple of the block
+ *                 size (16 bytes)
+ *
+ * \note           Upon exit, the content of the IV is updated so that you can
+ *                 call the function same function again on the following
+ *                 block(s) of data and get the same result as if it was
+ *                 encrypted in one call. This allows a "streaming" usage.
+ *                 If on the other hand you need to retain the contents of the
+ *                 IV, you should either save it manually or use the cipher
+ *                 module instead.
+ *
+ * \param ctx      CAMELLIA context
+ * \param mode     MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
+ * \param length   length of the input data
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful, or
+ *                 MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ */
+int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
+                    int mode,
+                    size_t length,
+                    unsigned char iv[16],
+                    const unsigned char *input,
+                    unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+/**
+ * \brief          CAMELLIA-CFB128 buffer encryption/decryption
+ *
+ * Note: Due to the nature of CFB you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and CAMELLIE_DECRYPT.
+ *
+ * \note           Upon exit, the content of the IV is updated so that you can
+ *                 call the function same function again on the following
+ *                 block(s) of data and get the same result as if it was
+ *                 encrypted in one call. This allows a "streaming" usage.
+ *                 If on the other hand you need to retain the contents of the
+ *                 IV, you should either save it manually or use the cipher
+ *                 module instead.
+ *
+ * \param ctx      CAMELLIA context
+ * \param mode     MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
+ * \param length   length of the input data
+ * \param iv_off   offset in IV (updated after use)
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful, or
+ *                 MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ */
+int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
+                       int mode,
+                       size_t length,
+                       size_t *iv_off,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+/**
+ * \brief               CAMELLIA-CTR buffer encryption/decryption
+ *
+ * Warning: You have to keep the maximum use of your counter in mind!
+ *
+ * Note: Due to the nature of CTR you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and MBEDTLS_CAMELLIA_DECRYPT.
+ *
+ * \param ctx           CAMELLIA context
+ * \param length        The length of the data
+ * \param nc_off        The offset in the current stream_block (for resuming
+ *                      within current cipher stream). The offset pointer to
+ *                      should be 0 at the start of a stream.
+ * \param nonce_counter The 128-bit nonce and counter.
+ * \param stream_block  The saved stream-block for resuming. Is overwritten
+ *                      by the function.
+ * \param input         The input data stream
+ * \param output        The output data stream
+ *
+ * \return         0 if successful
+ */
+int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
+                       size_t length,
+                       size_t *nc_off,
+                       unsigned char nonce_counter[16],
+                       unsigned char stream_block[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* MBEDTLS_CAMELLIA_ALT */
+#include "camellia_alt.h"
+#endif /* MBEDTLS_CAMELLIA_ALT */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if the test failed
+ */
+int mbedtls_camellia_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* camellia.h */