Mark Underwood
Test program running on MAX32625MBED. Control through USB Serial commands using a terminal emulator such as teraterm or putty.
Dependencies: MaximTinyTester CmdLine MAX541 USBDevice
MAX11043/MAX11043.h@69:989e392cf635, 2020-02-21 (annotated)
- Committer:
- whismanoid
- Date:
- Fri Feb 21 00:45:32 2020 +0000
- Revision:
- 69:989e392cf635
- Parent:
- 68:ffee1e54d3fe
- Child:
- 70:f44a577c9e59
MAX11043_EOC_INTERRUPT_POLLING works on MAX32625MBED at 9us conversion rate, with 1us timing margin
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| whismanoid | 53:3d5a3d241a5e | 1 | // /******************************************************************************* |
| whismanoid | 53:3d5a3d241a5e | 2 | // * Copyright (C) 2020 Maxim Integrated Products, Inc., All Rights Reserved. |
| whismanoid | 53:3d5a3d241a5e | 3 | // * |
| whismanoid | 53:3d5a3d241a5e | 4 | // * Permission is hereby granted, free of charge, to any person obtaining a |
| whismanoid | 53:3d5a3d241a5e | 5 | // * copy of this software and associated documentation files (the "Software"), |
| whismanoid | 53:3d5a3d241a5e | 6 | // * to deal in the Software without restriction, including without limitation |
| whismanoid | 53:3d5a3d241a5e | 7 | // * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| whismanoid | 53:3d5a3d241a5e | 8 | // * and/or sell copies of the Software, and to permit persons to whom the |
| whismanoid | 53:3d5a3d241a5e | 9 | // * Software is furnished to do so, subject to the following conditions: |
| whismanoid | 53:3d5a3d241a5e | 10 | // * |
| whismanoid | 53:3d5a3d241a5e | 11 | // * The above copyright notice and this permission notice shall be included |
| whismanoid | 53:3d5a3d241a5e | 12 | // * in all copies or substantial portions of the Software. |
| whismanoid | 53:3d5a3d241a5e | 13 | // * |
| whismanoid | 53:3d5a3d241a5e | 14 | // * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| whismanoid | 53:3d5a3d241a5e | 15 | // * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| whismanoid | 53:3d5a3d241a5e | 16 | // * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| whismanoid | 53:3d5a3d241a5e | 17 | // * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES |
| whismanoid | 53:3d5a3d241a5e | 18 | // * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| whismanoid | 53:3d5a3d241a5e | 19 | // * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| whismanoid | 53:3d5a3d241a5e | 20 | // * OTHER DEALINGS IN THE SOFTWARE. |
| whismanoid | 53:3d5a3d241a5e | 21 | // * |
| whismanoid | 53:3d5a3d241a5e | 22 | // * Except as contained in this notice, the name of Maxim Integrated |
| whismanoid | 53:3d5a3d241a5e | 23 | // * Products, Inc. shall not be used except as stated in the Maxim Integrated |
| whismanoid | 53:3d5a3d241a5e | 24 | // * Products, Inc. Branding Policy. |
| whismanoid | 53:3d5a3d241a5e | 25 | // * |
| whismanoid | 53:3d5a3d241a5e | 26 | // * The mere transfer of this software does not imply any licenses |
| whismanoid | 53:3d5a3d241a5e | 27 | // * of trade secrets, proprietary technology, copyrights, patents, |
| whismanoid | 53:3d5a3d241a5e | 28 | // * trademarks, maskwork rights, or any other form of intellectual |
| whismanoid | 53:3d5a3d241a5e | 29 | // * property whatsoever. Maxim Integrated Products, Inc. retains all |
| whismanoid | 53:3d5a3d241a5e | 30 | // * ownership rights. |
| whismanoid | 53:3d5a3d241a5e | 31 | // ******************************************************************************* |
| whismanoid | 53:3d5a3d241a5e | 32 | // */ |
| whismanoid | 53:3d5a3d241a5e | 33 | // ********************************************************************* |
| whismanoid | 53:3d5a3d241a5e | 34 | // @file MAX11043.h |
| whismanoid | 53:3d5a3d241a5e | 35 | // ********************************************************************* |
| whismanoid | 53:3d5a3d241a5e | 36 | // Header file |
| whismanoid | 53:3d5a3d241a5e | 37 | // DO NOT EDIT; except areas designated "CUSTOMIZE". Automatically generated file. |
| whismanoid | 53:3d5a3d241a5e | 38 | // generated by XMLSystemOfDevicesToMBED.py |
| whismanoid | 53:3d5a3d241a5e | 39 | // System Name = ExampleSystem |
| whismanoid | 53:3d5a3d241a5e | 40 | // System Description = Device driver example |
| whismanoid | 53:3d5a3d241a5e | 41 | // Device Name = MAX11043 |
| whismanoid | 53:3d5a3d241a5e | 42 | // Device Description = 200ksps, Low-Power, Serial SPI 24-Bit, 4-Channel, Differential/Single-Ended Input, Simultaneous-Sampling SD ADC |
| whismanoid | 53:3d5a3d241a5e | 43 | // Device DeviceBriefDescription = 24-bit 200ksps Delta-Sigma ADC |
| whismanoid | 53:3d5a3d241a5e | 44 | // Device Manufacturer = Maxim Integrated |
| whismanoid | 53:3d5a3d241a5e | 45 | // Device PartNumber = MAX11043ATL+ |
| whismanoid | 53:3d5a3d241a5e | 46 | // Device RegValue_Width = DataWidth16bit_HL |
| whismanoid | 53:3d5a3d241a5e | 47 | // |
| whismanoid | 53:3d5a3d241a5e | 48 | // ADC MaxOutputDataRate = 200ksps |
| whismanoid | 53:3d5a3d241a5e | 49 | // ADC NumChannels = 4 |
| whismanoid | 53:3d5a3d241a5e | 50 | // ADC ResolutionBits = 24 |
| whismanoid | 53:3d5a3d241a5e | 51 | // |
| whismanoid | 53:3d5a3d241a5e | 52 | // SPI CS = ActiveLow |
| whismanoid | 53:3d5a3d241a5e | 53 | // SPI FrameStart = CS |
| whismanoid | 53:3d5a3d241a5e | 54 | // SPI CPOL = 0 |
| whismanoid | 53:3d5a3d241a5e | 55 | // SPI CPHA = 0 |
| whismanoid | 53:3d5a3d241a5e | 56 | // SPI MOSI and MISO Data are both stable on Rising edge of SCLK |
| whismanoid | 53:3d5a3d241a5e | 57 | // SPI SCLK Idle Low |
| whismanoid | 53:3d5a3d241a5e | 58 | // SPI SCLKMaxMHz = 40 |
| whismanoid | 53:3d5a3d241a5e | 59 | // SPI SCLKMinMHz = 0 |
| whismanoid | 53:3d5a3d241a5e | 60 | // |
| whismanoid | 53:3d5a3d241a5e | 61 | |
| whismanoid | 53:3d5a3d241a5e | 62 | |
| whismanoid | 53:3d5a3d241a5e | 63 | // Prevent multiple declaration |
| whismanoid | 53:3d5a3d241a5e | 64 | #ifndef __MAX11043_H__ |
| whismanoid | 53:3d5a3d241a5e | 65 | #define __MAX11043_H__ |
| whismanoid | 53:3d5a3d241a5e | 66 | |
| whismanoid | 69:989e392cf635 | 67 | //-------------------------------------------------- |
| whismanoid | 69:989e392cf635 | 68 | // MAX11043 ADC Read operations must be synchronized to EOC End Of Conversion |
| whismanoid | 69:989e392cf635 | 69 | // EOC# asserts low when new data is available. |
| whismanoid | 69:989e392cf635 | 70 | // Initiate a data read prior to the next rising edge of EOC# or the result is overwritten. |
| whismanoid | 69:989e392cf635 | 71 | #ifndef MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 72 | #define MAX11043_EOC_INTERRUPT_POLLING 1 |
| whismanoid | 69:989e392cf635 | 73 | #endif // MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 74 | //-------------------------------------------------- |
| whismanoid | 69:989e392cf635 | 75 | // MAX11043 ADC Read operations must be synchronized to EOC End Of Conversion |
| whismanoid | 69:989e392cf635 | 76 | // EOC# asserts low when new data is available. |
| whismanoid | 69:989e392cf635 | 77 | // Initiate a data read prior to the next rising edge of EOC# or the result is overwritten. |
| whismanoid | 69:989e392cf635 | 78 | #if MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 79 | // MAX11043 EOC End Of Conversion input should be InterruptIn(PinName:EOC_pin).fall(onEOCFallingEdge); |
| whismanoid | 69:989e392cf635 | 80 | // Workaround using DigitalIn(PinName:EOC_pin) polled to sync with EOC falling edge for ADC reads |
| whismanoid | 69:989e392cf635 | 81 | // 2020-02-20 MAX11043_EOC_INTERRUPT_POLLING works on MAX32625MBED at 9us conversion rate, with 1us timing margin |
| whismanoid | 69:989e392cf635 | 82 | #else // MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 83 | // MAX11043 EOC End Of Conversion input is InterruptIn(PinName:EOC_pin).fall(onEOCFallingEdge); |
| whismanoid | 69:989e392cf635 | 84 | #endif // MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 85 | //-------------------------------------------------- |
| whismanoid | 69:989e392cf635 | 86 | |
| whismanoid | 53:3d5a3d241a5e | 87 | // standard include for target platform -- Platform_Include_Boilerplate |
| whismanoid | 53:3d5a3d241a5e | 88 | #include "mbed.h" |
| whismanoid | 53:3d5a3d241a5e | 89 | // Platforms: |
| whismanoid | 53:3d5a3d241a5e | 90 | // - MAX32625MBED |
| whismanoid | 53:3d5a3d241a5e | 91 | // - supports mbed-os-5.11, requires USBDevice library |
| whismanoid | 53:3d5a3d241a5e | 92 | // - add https://developer.mbed.org/teams/MaximIntegrated/code/USBDevice/ |
| whismanoid | 53:3d5a3d241a5e | 93 | // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 94 | // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 95 | // - MAX32600MBED |
| whismanoid | 53:3d5a3d241a5e | 96 | // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 97 | // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 98 | // - Windows 10 note: Don't connect HDK until you are ready to load new firmware into the board. |
| whismanoid | 53:3d5a3d241a5e | 99 | // - NUCLEO_F446RE |
| whismanoid | 53:3d5a3d241a5e | 100 | // - remove USBDevice library |
| whismanoid | 53:3d5a3d241a5e | 101 | // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 102 | // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 103 | // - NUCLEO_F401RE |
| whismanoid | 53:3d5a3d241a5e | 104 | // - remove USBDevice library |
| whismanoid | 53:3d5a3d241a5e | 105 | // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 106 | // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 107 | // - MAX32630FTHR |
| whismanoid | 53:3d5a3d241a5e | 108 | // - #include "max32630fthr.h" |
| whismanoid | 53:3d5a3d241a5e | 109 | // - add http://os.mbed.org/teams/MaximIntegrated/code/max32630fthr/ |
| whismanoid | 53:3d5a3d241a5e | 110 | // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 111 | // - MAX32620FTHR |
| whismanoid | 53:3d5a3d241a5e | 112 | // - #include "MAX32620FTHR.h" |
| whismanoid | 53:3d5a3d241a5e | 113 | // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 114 | // - add https://os.mbed.com/teams/MaximIntegrated/code/MAX32620FTHR/ |
| whismanoid | 53:3d5a3d241a5e | 115 | // - not tested yet |
| whismanoid | 53:3d5a3d241a5e | 116 | // - MAX32625PICO |
| whismanoid | 53:3d5a3d241a5e | 117 | // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 118 | // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 119 | // - not tested yet |
| whismanoid | 53:3d5a3d241a5e | 120 | // |
| whismanoid | 53:3d5a3d241a5e | 121 | // end Platform_Include_Boilerplate |
| whismanoid | 53:3d5a3d241a5e | 122 | |
| whismanoid | 53:3d5a3d241a5e | 123 | // CODE GENERATOR: conditional defines |
| whismanoid | 53:3d5a3d241a5e | 124 | // CODE GENERATOR: class declaration and docstrings |
| whismanoid | 53:3d5a3d241a5e | 125 | /** |
| whismanoid | 53:3d5a3d241a5e | 126 | * @brief MAX11043 200ksps, Low-Power, Serial SPI 24-Bit, 4-Channel, Differential/Single-Ended Input, Simultaneous-Sampling SD ADC |
| whismanoid | 53:3d5a3d241a5e | 127 | * |
| whismanoid | 53:3d5a3d241a5e | 128 | * |
| whismanoid | 53:3d5a3d241a5e | 129 | * |
| whismanoid | 53:3d5a3d241a5e | 130 | * Datasheet: https://www.maximintegrated.com/MAX11043 |
| whismanoid | 53:3d5a3d241a5e | 131 | * |
| whismanoid | 53:3d5a3d241a5e | 132 | * |
| whismanoid | 53:3d5a3d241a5e | 133 | * |
| whismanoid | 53:3d5a3d241a5e | 134 | * //---------- CODE GENERATOR: helloCppCodeList |
| whismanoid | 53:3d5a3d241a5e | 135 | * @code |
| whismanoid | 53:3d5a3d241a5e | 136 | * // CODE GENERATOR: example code includes |
| whismanoid | 53:3d5a3d241a5e | 137 | * |
| whismanoid | 53:3d5a3d241a5e | 138 | * // example code includes |
| whismanoid | 53:3d5a3d241a5e | 139 | * // standard include for target platform -- Platform_Include_Boilerplate |
| whismanoid | 53:3d5a3d241a5e | 140 | * #include "mbed.h" |
| whismanoid | 53:3d5a3d241a5e | 141 | * // Platforms: |
| whismanoid | 53:3d5a3d241a5e | 142 | * // - MAX32625MBED |
| whismanoid | 53:3d5a3d241a5e | 143 | * // - supports mbed-os-5.11, requires USBDevice library |
| whismanoid | 53:3d5a3d241a5e | 144 | * // - add https://developer.mbed.org/teams/MaximIntegrated/code/USBDevice/ |
| whismanoid | 53:3d5a3d241a5e | 145 | * // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 146 | * // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 147 | * // - MAX32600MBED |
| whismanoid | 53:3d5a3d241a5e | 148 | * // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 149 | * // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 150 | * // - Windows 10 note: Don't connect HDK until you are ready to load new firmware into the board. |
| whismanoid | 53:3d5a3d241a5e | 151 | * // - NUCLEO_F446RE |
| whismanoid | 53:3d5a3d241a5e | 152 | * // - remove USBDevice library |
| whismanoid | 53:3d5a3d241a5e | 153 | * // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 154 | * // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 155 | * // - NUCLEO_F401RE |
| whismanoid | 53:3d5a3d241a5e | 156 | * // - remove USBDevice library |
| whismanoid | 53:3d5a3d241a5e | 157 | * // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 158 | * // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 159 | * // - MAX32630FTHR |
| whismanoid | 53:3d5a3d241a5e | 160 | * // - #include "max32630fthr.h" |
| whismanoid | 53:3d5a3d241a5e | 161 | * // - add http://os.mbed.org/teams/MaximIntegrated/code/max32630fthr/ |
| whismanoid | 53:3d5a3d241a5e | 162 | * // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 163 | * // - MAX32620FTHR |
| whismanoid | 53:3d5a3d241a5e | 164 | * // - #include "MAX32620FTHR.h" |
| whismanoid | 53:3d5a3d241a5e | 165 | * // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 166 | * // - add https://os.mbed.com/teams/MaximIntegrated/code/MAX32620FTHR/ |
| whismanoid | 53:3d5a3d241a5e | 167 | * // - not tested yet |
| whismanoid | 53:3d5a3d241a5e | 168 | * // - MAX32625PICO |
| whismanoid | 53:3d5a3d241a5e | 169 | * // - remove max32630fthr library (if present) |
| whismanoid | 53:3d5a3d241a5e | 170 | * // - remove MAX32620FTHR library (if present) |
| whismanoid | 53:3d5a3d241a5e | 171 | * // - not tested yet |
| whismanoid | 53:3d5a3d241a5e | 172 | * // |
| whismanoid | 53:3d5a3d241a5e | 173 | * // end Platform_Include_Boilerplate |
| whismanoid | 53:3d5a3d241a5e | 174 | * #include "MAX11043.h" |
| whismanoid | 53:3d5a3d241a5e | 175 | * |
| whismanoid | 53:3d5a3d241a5e | 176 | * // example code board support |
| whismanoid | 53:3d5a3d241a5e | 177 | * //MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3); |
| whismanoid | 53:3d5a3d241a5e | 178 | * //DigitalOut rLED(LED1); |
| whismanoid | 53:3d5a3d241a5e | 179 | * //DigitalOut gLED(LED2); |
| whismanoid | 53:3d5a3d241a5e | 180 | * //DigitalOut bLED(LED3); |
| whismanoid | 53:3d5a3d241a5e | 181 | * // |
| whismanoid | 53:3d5a3d241a5e | 182 | * // Arduino "shield" connector port definitions (MAX32625MBED shown) |
| whismanoid | 53:3d5a3d241a5e | 183 | * #if defined(TARGET_MAX32625MBED) |
| whismanoid | 53:3d5a3d241a5e | 184 | * #define A0 AIN_0 |
| whismanoid | 53:3d5a3d241a5e | 185 | * #define A1 AIN_1 |
| whismanoid | 53:3d5a3d241a5e | 186 | * #define A2 AIN_2 |
| whismanoid | 53:3d5a3d241a5e | 187 | * #define A3 AIN_3 |
| whismanoid | 53:3d5a3d241a5e | 188 | * #define D0 P0_0 |
| whismanoid | 53:3d5a3d241a5e | 189 | * #define D1 P0_1 |
| whismanoid | 53:3d5a3d241a5e | 190 | * #define D2 P0_2 |
| whismanoid | 53:3d5a3d241a5e | 191 | * #define D3 P0_3 |
| whismanoid | 53:3d5a3d241a5e | 192 | * #define D4 P0_4 |
| whismanoid | 53:3d5a3d241a5e | 193 | * #define D5 P0_5 |
| whismanoid | 53:3d5a3d241a5e | 194 | * #define D6 P0_6 |
| whismanoid | 53:3d5a3d241a5e | 195 | * #define D7 P0_7 |
| whismanoid | 53:3d5a3d241a5e | 196 | * #define D8 P1_4 |
| whismanoid | 53:3d5a3d241a5e | 197 | * #define D9 P1_5 |
| whismanoid | 53:3d5a3d241a5e | 198 | * #define D10 P1_3 |
| whismanoid | 53:3d5a3d241a5e | 199 | * #define D11 P1_1 |
| whismanoid | 53:3d5a3d241a5e | 200 | * #define D12 P1_2 |
| whismanoid | 53:3d5a3d241a5e | 201 | * #define D13 P1_0 |
| whismanoid | 53:3d5a3d241a5e | 202 | * #endif |
| whismanoid | 53:3d5a3d241a5e | 203 | * |
| whismanoid | 53:3d5a3d241a5e | 204 | * // example code declare SPI interface |
| whismanoid | 53:3d5a3d241a5e | 205 | * #if defined(TARGET_MAX32625MBED) |
| whismanoid | 68:ffee1e54d3fe | 206 | * // SPI spi(SPI1_MOSI, SPI1_MISO, SPI1_SCK); // mosi, miso, sclk spi1 TARGET_MAX32625MBED: P1_1 P1_2 P1_0 Arduino 10-pin header D11 D12 D13 D10 |
| whismanoid | 68:ffee1e54d3fe | 207 | * // DigitalOut spi_cs(SPI1_SS); // TARGET_MAX32625MBED: not connected |
| whismanoid | 68:ffee1e54d3fe | 208 | * // Support SPI hardware-controlled CS instead of GPIO CS (mbed) |
| whismanoid | 68:ffee1e54d3fe | 209 | * // 2020-02-19 MAX32625MBED GPIO CS envelope is 23us (11.4us before SCLK and 8.6us after SCLK). |
| whismanoid | 68:ffee1e54d3fe | 210 | * // 2020-02-19 MAX32625MBED SPI controlled CS envelope 4 channel read reduced to 4.2us (24MHz SCLK), 1.2us setup, 0us hold. |
| whismanoid | 68:ffee1e54d3fe | 211 | * // 2020-02-19 MAX11043 slowest EOC rate is 9us. |
| whismanoid | 67:5b8a495dda1c | 212 | * SPI spi(SPI1_MOSI, SPI1_MISO, SPI1_SCK, SPI1_SS); // mosi, miso, sclk spi1 TARGET_MAX32625MBED: P1_1 P1_2 P1_0 Arduino 10-pin header D11 D12 D13 D10 |
| whismanoid | 67:5b8a495dda1c | 213 | * DigitalOut spi_cs(NC); // TARGET_MAX32625MBED: not connected |
| whismanoid | 67:5b8a495dda1c | 214 | * // PinName NC means NOT_CONNECTED; DigitalOut::is_connected() returns false |
| whismanoid | 68:ffee1e54d3fe | 215 | * // add m_cs_pin.is_connected() guard before writing m_cs_pin = m_SPI_cs_state |
| whismanoid | 68:ffee1e54d3fe | 216 | * // to avoid runtime error Assertion failed: obj->name != (PinName)NC |
| whismanoid | 53:3d5a3d241a5e | 217 | * #elif defined(TARGET_MAX32600MBED) |
| whismanoid | 53:3d5a3d241a5e | 218 | * SPI spi(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13 |
| whismanoid | 53:3d5a3d241a5e | 219 | * DigitalOut spi_cs(SPI2_SS); // Generic: Arduino 10-pin header D10 |
| whismanoid | 53:3d5a3d241a5e | 220 | * #else |
| whismanoid | 53:3d5a3d241a5e | 221 | * SPI spi(D11, D12, D13); // mosi, miso, sclk spi1 TARGET_MAX32600MBED: Arduino 10-pin header D11 D12 D13 |
| whismanoid | 53:3d5a3d241a5e | 222 | * DigitalOut spi_cs(D10); // Generic: Arduino 10-pin header D10 |
| whismanoid | 53:3d5a3d241a5e | 223 | * #endif |
| whismanoid | 53:3d5a3d241a5e | 224 | * |
| whismanoid | 53:3d5a3d241a5e | 225 | * // example code declare GPIO interface pins |
| whismanoid | 53:3d5a3d241a5e | 226 | * DigitalOut CONVRUN_pin(D9); // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 227 | * DigitalOut SHDN_pin(D8); // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 228 | * DigitalOut DACSTEP_pin(D7); // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 229 | * DigitalOut UP_slash_DWNb_pin(D6); // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 230 | * DigitalIn EOC_pin(D2); // Digital Event Output from MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 231 | * // example code declare device instance |
| whismanoid | 53:3d5a3d241a5e | 232 | * MAX11043 g_MAX11043_device(spi, spi_cs, CONVRUN_pin, SHDN_pin, DACSTEP_pin, UP_slash_DWNb_pin, EOC_pin, MAX11043::MAX11043_IC); |
| whismanoid | 53:3d5a3d241a5e | 233 | * |
| whismanoid | 53:3d5a3d241a5e | 234 | * // CODE GENERATOR: example code for ADC: serial port declaration |
| whismanoid | 53:3d5a3d241a5e | 235 | * //-------------------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 236 | * // Declare the Serial driver |
| whismanoid | 53:3d5a3d241a5e | 237 | * // default baud rate settings are 9600 8N1 |
| whismanoid | 53:3d5a3d241a5e | 238 | * // install device driver from http://developer.mbed.org/media/downloads/drivers/mbedWinSerial_16466.exe |
| whismanoid | 53:3d5a3d241a5e | 239 | * // see docs https://docs.mbed.com/docs/mbed-os-handbook/en/5.5/getting_started/what_need/ |
| whismanoid | 53:3d5a3d241a5e | 240 | * #if defined(TARGET_MAX32630) |
| whismanoid | 53:3d5a3d241a5e | 241 | * #include "USBSerial.h" |
| whismanoid | 53:3d5a3d241a5e | 242 | * // Hardware serial port over DAPLink |
| whismanoid | 53:3d5a3d241a5e | 243 | * // The default baud rate for the DapLink UART is 9600 |
| whismanoid | 53:3d5a3d241a5e | 244 | * //Serial DAPLINKserial(P2_1, P2_0); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 245 | * // #define HAS_DAPLINK_SERIAL 1 |
| whismanoid | 53:3d5a3d241a5e | 246 | * // Virtual serial port over USB |
| whismanoid | 53:3d5a3d241a5e | 247 | * // The baud rate does not affect the virtual USBSerial UART. |
| whismanoid | 53:3d5a3d241a5e | 248 | * USBSerial serial; |
| whismanoid | 53:3d5a3d241a5e | 249 | * //-------------------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 250 | * #elif defined(TARGET_MAX32625MBED) |
| whismanoid | 53:3d5a3d241a5e | 251 | * #include "USBSerial.h" |
| whismanoid | 53:3d5a3d241a5e | 252 | * // Hardware serial port over DAPLink |
| whismanoid | 53:3d5a3d241a5e | 253 | * // The default baud rate for the DapLink UART is 9600 |
| whismanoid | 53:3d5a3d241a5e | 254 | * //Serial DAPLINKserial(P2_1, P2_0); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 255 | * // #define HAS_DAPLINK_SERIAL 1 |
| whismanoid | 53:3d5a3d241a5e | 256 | * // Virtual serial port over USB |
| whismanoid | 53:3d5a3d241a5e | 257 | * // The baud rate does not affect the virtual USBSerial UART. |
| whismanoid | 53:3d5a3d241a5e | 258 | * USBSerial serial; |
| whismanoid | 53:3d5a3d241a5e | 259 | * //-------------------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 260 | * #elif defined(TARGET_MAX32600) |
| whismanoid | 53:3d5a3d241a5e | 261 | * #include "USBSerial.h" |
| whismanoid | 53:3d5a3d241a5e | 262 | * // Hardware serial port over DAPLink |
| whismanoid | 53:3d5a3d241a5e | 263 | * // The default baud rate for the DapLink UART is 9600 |
| whismanoid | 53:3d5a3d241a5e | 264 | * Serial DAPLINKserial(P1_1, P1_0); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 265 | * #define HAS_DAPLINK_SERIAL 1 |
| whismanoid | 53:3d5a3d241a5e | 266 | * // Virtual serial port over USB |
| whismanoid | 53:3d5a3d241a5e | 267 | * // The baud rate does not affect the virtual USBSerial UART. |
| whismanoid | 53:3d5a3d241a5e | 268 | * USBSerial serial; |
| whismanoid | 53:3d5a3d241a5e | 269 | * //-------------------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 270 | * #elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_F401RE) |
| whismanoid | 53:3d5a3d241a5e | 271 | * Serial serial(SERIAL_TX, SERIAL_RX); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 272 | * //-------------------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 273 | * #else |
| whismanoid | 53:3d5a3d241a5e | 274 | * #if defined(SERIAL_TX) |
| whismanoid | 53:3d5a3d241a5e | 275 | * #warning "target not previously tested; guess serial pins are SERIAL_TX, SERIAL_RX..." |
| whismanoid | 53:3d5a3d241a5e | 276 | * Serial serial(SERIAL_TX, SERIAL_RX); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 277 | * #elif defined(USBTX) |
| whismanoid | 53:3d5a3d241a5e | 278 | * #warning "target not previously tested; guess serial pins are USBTX, USBRX..." |
| whismanoid | 53:3d5a3d241a5e | 279 | * Serial serial(USBTX, USBRX); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 280 | * #elif defined(UART_TX) |
| whismanoid | 53:3d5a3d241a5e | 281 | * #warning "target not previously tested; guess serial pins are UART_TX, UART_RX..." |
| whismanoid | 53:3d5a3d241a5e | 282 | * Serial serial(UART_TX, UART_RX); // tx, rx |
| whismanoid | 53:3d5a3d241a5e | 283 | * #else |
| whismanoid | 53:3d5a3d241a5e | 284 | * #warning "target not previously tested; need to define serial pins..." |
| whismanoid | 53:3d5a3d241a5e | 285 | * #endif |
| whismanoid | 53:3d5a3d241a5e | 286 | * #endif |
| whismanoid | 53:3d5a3d241a5e | 287 | * // |
| whismanoid | 53:3d5a3d241a5e | 288 | * #include "CmdLine.h" |
| whismanoid | 53:3d5a3d241a5e | 289 | * CmdLine cmdLine(serial, "serial"); |
| whismanoid | 53:3d5a3d241a5e | 290 | * |
| whismanoid | 53:3d5a3d241a5e | 291 | * // example code main function |
| whismanoid | 53:3d5a3d241a5e | 292 | * int main() |
| whismanoid | 53:3d5a3d241a5e | 293 | * { |
| whismanoid | 53:3d5a3d241a5e | 294 | * // CODE GENERATOR: example code: member function Init |
| whismanoid | 53:3d5a3d241a5e | 295 | * g_MAX11043_device.Init(); |
| whismanoid | 53:3d5a3d241a5e | 296 | * |
| whismanoid | 53:3d5a3d241a5e | 297 | * while (1) |
| whismanoid | 53:3d5a3d241a5e | 298 | * { |
| whismanoid | 53:3d5a3d241a5e | 299 | * // CODE GENERATOR: example code: has no member function REF |
| whismanoid | 53:3d5a3d241a5e | 300 | * // CODE GENERATOR: example code for ADC: repeat-forever convert and print conversion result, one record per line |
| whismanoid | 53:3d5a3d241a5e | 301 | * // CODE GENERATOR: ResolutionBits = 24 |
| whismanoid | 53:3d5a3d241a5e | 302 | * // CODE GENERATOR: FScode = None |
| whismanoid | 53:3d5a3d241a5e | 303 | * // CODE GENERATOR: NumChannels = 4 |
| whismanoid | 53:3d5a3d241a5e | 304 | * while(1) { // this code repeats forever |
| whismanoid | 53:3d5a3d241a5e | 305 | * // this code repeats forever |
| whismanoid | 53:3d5a3d241a5e | 306 | * // CODE GENERATOR: example code: has no member function ScanStandardExternalClock |
| whismanoid | 53:3d5a3d241a5e | 307 | * // CODE GENERATOR: example code: has no member function ReadAINcode |
| whismanoid | 53:3d5a3d241a5e | 308 | * // wait(3.0); |
| whismanoid | 53:3d5a3d241a5e | 309 | * // CODE GENERATOR: print conversion result |
| whismanoid | 53:3d5a3d241a5e | 310 | * // Use Arduino Serial Plotter to view output: Tools | Serial Plotter |
| whismanoid | 53:3d5a3d241a5e | 311 | * cmdLine.serial().printf("%d", g_MAX11043_device.AINcode[0]); |
| whismanoid | 53:3d5a3d241a5e | 312 | * for (int index = 1; index <= channelId_0_3; index++) { |
| whismanoid | 53:3d5a3d241a5e | 313 | * cmdLine.serial().printf(",%d", g_MAX11043_device.AINcode[index]); |
| whismanoid | 53:3d5a3d241a5e | 314 | * } |
| whismanoid | 53:3d5a3d241a5e | 315 | * cmdLine.serial().printf("\r\n"); |
| whismanoid | 53:3d5a3d241a5e | 316 | * |
| whismanoid | 53:3d5a3d241a5e | 317 | * } // this code repeats forever |
| whismanoid | 53:3d5a3d241a5e | 318 | * } |
| whismanoid | 53:3d5a3d241a5e | 319 | * } |
| whismanoid | 53:3d5a3d241a5e | 320 | * @endcode |
| whismanoid | 53:3d5a3d241a5e | 321 | * //---------- CODE GENERATOR: end helloCppCodeList |
| whismanoid | 53:3d5a3d241a5e | 322 | */ |
| whismanoid | 53:3d5a3d241a5e | 323 | class MAX11043 { |
| whismanoid | 53:3d5a3d241a5e | 324 | public: |
| whismanoid | 53:3d5a3d241a5e | 325 | // CODE GENERATOR: TypedefEnum EnumItem declarations |
| whismanoid | 57:1c9da8e90737 | 326 | // CODE GENERATOR: TypedefEnum MAX11043_CMDOP_enum_t |
| whismanoid | 57:1c9da8e90737 | 327 | //---------------------------------------- |
| whismanoid | 57:1c9da8e90737 | 328 | /// Command Operation Format (see function DecodeCommand) |
| whismanoid | 57:1c9da8e90737 | 329 | /// |
| whismanoid | 57:1c9da8e90737 | 330 | /// Naming convention is CMDOP_bitstream_OPERATION_NAME |
| whismanoid | 57:1c9da8e90737 | 331 | /// - 0aaa_aax0 = 5-bit register address field |
| whismanoid | 57:1c9da8e90737 | 332 | /// - 0xxx_xxr0 = read/write bit (1=read, 0=write) |
| whismanoid | 57:1c9da8e90737 | 333 | /// - xxxx = don't care |
| whismanoid | 57:1c9da8e90737 | 334 | typedef enum MAX11043_CMDOP_enum_t { |
| whismanoid | 57:1c9da8e90737 | 335 | CMDOP_0aaa_aa00_WriteRegister = 0x00, //!< 8'b00000000 |
| whismanoid | 57:1c9da8e90737 | 336 | CMDOP_0aaa_aa10_ReadRegister = 0x02, //!< 8'b00000010 |
| whismanoid | 57:1c9da8e90737 | 337 | CMDOP_1111_1111_NoOperationMOSIidleHigh = 0xff, //!< 8'b11111111 |
| whismanoid | 57:1c9da8e90737 | 338 | } MAX11043_CMDOP_enum_t; |
| whismanoid | 57:1c9da8e90737 | 339 | |
| whismanoid | 53:3d5a3d241a5e | 340 | // CODE GENERATOR: TypedefEnum MAX11043_CMD_enum_t |
| whismanoid | 53:3d5a3d241a5e | 341 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 342 | /// Register Addresses |
| whismanoid | 53:3d5a3d241a5e | 343 | /// |
| whismanoid | 53:3d5a3d241a5e | 344 | /// Naming convention is CMD_bitstream_WrAddr_FunctionName |
| whismanoid | 53:3d5a3d241a5e | 345 | /// - first byte format is 0aaa_aar0 |
| whismanoid | 53:3d5a3d241a5e | 346 | /// - 0 = bitstream required 0 bit |
| whismanoid | 53:3d5a3d241a5e | 347 | /// - aaa_aa = bitstream 5-bit register address field |
| whismanoid | 53:3d5a3d241a5e | 348 | /// - r = bitstream read/write bit (1=read, 0=write) |
| whismanoid | 53:3d5a3d241a5e | 349 | /// - WrAddr = Write operation to address Addr |
| whismanoid | 53:3d5a3d241a5e | 350 | /// - RdAddr = Read operation from address Addr |
| whismanoid | 53:3d5a3d241a5e | 351 | /// - d8 = 8-bit register data field |
| whismanoid | 53:3d5a3d241a5e | 352 | /// - d16 = 16-bit register data field |
| whismanoid | 59:47538bcf6cda | 353 | /// - d16o8 = 16-bit or 24-bit register data field |
| whismanoid | 53:3d5a3d241a5e | 354 | /// - d24 = 24-bit register data field |
| whismanoid | 53:3d5a3d241a5e | 355 | /// - d32 = 32-bit register data field |
| whismanoid | 53:3d5a3d241a5e | 356 | /// - x = don't care |
| whismanoid | 53:3d5a3d241a5e | 357 | typedef enum MAX11043_CMD_enum_t { |
| whismanoid | 59:47538bcf6cda | 358 | CMD_0000_0010_d16o8_Rd00_ADCa = 0x02, //!< 8'b00000010 |
| whismanoid | 59:47538bcf6cda | 359 | CMD_0000_0110_d16o8_Rd01_ADCb = 0x06, //!< 8'b00000110 |
| whismanoid | 59:47538bcf6cda | 360 | CMD_0000_1010_d16o8_Rd02_ADCc = 0x0a, //!< 8'b00001010 |
| whismanoid | 59:47538bcf6cda | 361 | CMD_0000_1110_d16o8_Rd03_ADCd = 0x0e, //!< 8'b00001110 |
| whismanoid | 63:8f39d21d6157 | 362 | CMD_0001_0010_d16o8_d16o8_Rd04_ADCab = 0x12, //!< 8'b00010010 |
| whismanoid | 63:8f39d21d6157 | 363 | CMD_0001_0110_d16o8_d16o8_Rd05_ADCcd = 0x16, //!< 8'b00010110 |
| whismanoid | 63:8f39d21d6157 | 364 | CMD_0001_1010_d16o8_d16o8_d16o8_d16o8_Rd06_ADCabcd = 0x1a, //!< 8'b00011010 |
| whismanoid | 53:3d5a3d241a5e | 365 | CMD_0001_1110_d8_Rd07_Status = 0x1e, //!< 8'b00011110 |
| whismanoid | 53:3d5a3d241a5e | 366 | CMD_0010_0000_d16_Wr08_Configuration = 0x20, //!< 8'b00100000 |
| whismanoid | 53:3d5a3d241a5e | 367 | CMD_0010_0010_d16_Rd08_Configuration = 0x22, //!< 8'b00100010 |
| whismanoid | 53:3d5a3d241a5e | 368 | CMD_0010_0100_d16_Wr09_DAC = 0x24, //!< 8'b00100100 |
| whismanoid | 53:3d5a3d241a5e | 369 | CMD_0010_0110_d16_Rd09_DAC = 0x26, //!< 8'b00100110 |
| whismanoid | 53:3d5a3d241a5e | 370 | CMD_0010_1000_d16_Wr0A_DACStep = 0x28, //!< 8'b00101000 |
| whismanoid | 53:3d5a3d241a5e | 371 | CMD_0010_1010_d16_Rd0A_DACStep = 0x2a, //!< 8'b00101010 |
| whismanoid | 53:3d5a3d241a5e | 372 | CMD_0010_1100_d16_Wr0B_DACHDACL = 0x2c, //!< 8'b00101100 |
| whismanoid | 53:3d5a3d241a5e | 373 | CMD_0010_1110_d16_Rd0B_DACHDACL = 0x2e, //!< 8'b00101110 |
| whismanoid | 53:3d5a3d241a5e | 374 | CMD_0011_0000_d16_Wr0C_ConfigA = 0x30, //!< 8'b00110000 |
| whismanoid | 53:3d5a3d241a5e | 375 | CMD_0011_0010_d16_Rd0C_ConfigA = 0x32, //!< 8'b00110010 |
| whismanoid | 53:3d5a3d241a5e | 376 | CMD_0011_0100_d16_Wr0D_ConfigB = 0x34, //!< 8'b00110100 |
| whismanoid | 53:3d5a3d241a5e | 377 | CMD_0011_0110_d16_Rd0D_ConfigB = 0x36, //!< 8'b00110110 |
| whismanoid | 53:3d5a3d241a5e | 378 | CMD_0011_1000_d16_Wr0E_ConfigC = 0x38, //!< 8'b00111000 |
| whismanoid | 53:3d5a3d241a5e | 379 | CMD_0011_1010_d16_Rd0E_ConfigC = 0x3a, //!< 8'b00111010 |
| whismanoid | 53:3d5a3d241a5e | 380 | CMD_0011_1100_d16_Wr0F_ConfigD = 0x3c, //!< 8'b00111100 |
| whismanoid | 53:3d5a3d241a5e | 381 | CMD_0011_1110_d16_Rd0F_ConfigD = 0x3e, //!< 8'b00111110 |
| whismanoid | 53:3d5a3d241a5e | 382 | CMD_0100_0000_d16_Wr10_Reference = 0x40, //!< 8'b01000000 |
| whismanoid | 53:3d5a3d241a5e | 383 | CMD_0100_0010_d16_Rd10_Reference = 0x42, //!< 8'b01000010 |
| whismanoid | 53:3d5a3d241a5e | 384 | CMD_0100_0100_d16_Wr11_AGain = 0x44, //!< 8'b01000100 |
| whismanoid | 53:3d5a3d241a5e | 385 | CMD_0100_0110_d16_Rd11_AGain = 0x46, //!< 8'b01000110 |
| whismanoid | 53:3d5a3d241a5e | 386 | CMD_0100_1000_d16_Wr12_BGain = 0x48, //!< 8'b01001000 |
| whismanoid | 53:3d5a3d241a5e | 387 | CMD_0100_1010_d16_Rd12_BGain = 0x4a, //!< 8'b01001010 |
| whismanoid | 53:3d5a3d241a5e | 388 | CMD_0100_1100_d16_Wr13_CGain = 0x4c, //!< 8'b01001100 |
| whismanoid | 53:3d5a3d241a5e | 389 | CMD_0100_1110_d16_Rd13_CGain = 0x4e, //!< 8'b01001110 |
| whismanoid | 53:3d5a3d241a5e | 390 | CMD_0101_0000_d16_Wr14_DGain = 0x50, //!< 8'b01010000 |
| whismanoid | 53:3d5a3d241a5e | 391 | CMD_0101_0010_d16_Rd14_DGain = 0x52, //!< 8'b01010010 |
| whismanoid | 53:3d5a3d241a5e | 392 | CMD_0101_0100_d8_Wr15_FilterCAddress = 0x54, //!< 8'b01010100 |
| whismanoid | 53:3d5a3d241a5e | 393 | CMD_0101_0110_d8_Rd15_FilterCAddress = 0x56, //!< 8'b01010110 |
| whismanoid | 53:3d5a3d241a5e | 394 | CMD_0101_1000_d32_Wr16_FilterCDataOut = 0x58, //!< 8'b01011000 |
| whismanoid | 53:3d5a3d241a5e | 395 | CMD_0101_1010_d32_Rd16_FilterCDataOut = 0x5a, //!< 8'b01011010 |
| whismanoid | 53:3d5a3d241a5e | 396 | CMD_0101_1100_d32_Wr17_FilterCDataIn = 0x5c, //!< 8'b01011100 |
| whismanoid | 53:3d5a3d241a5e | 397 | CMD_0101_1110_d32_Rd17_FilterCDataIn = 0x5e, //!< 8'b01011110 |
| whismanoid | 53:3d5a3d241a5e | 398 | CMD_0110_0000_d8_Wr18_FlashMode = 0x60, //!< 8'b01100000 |
| whismanoid | 53:3d5a3d241a5e | 399 | CMD_0110_0010_d8_Rd18_FlashMode = 0x62, //!< 8'b01100010 |
| whismanoid | 53:3d5a3d241a5e | 400 | CMD_0110_0100_d16_Wr19_FlashAddr = 0x64, //!< 8'b01100100 |
| whismanoid | 53:3d5a3d241a5e | 401 | CMD_0110_0110_d16_Rd19_FlashAddr = 0x66, //!< 8'b01100110 |
| whismanoid | 53:3d5a3d241a5e | 402 | CMD_0110_1000_d16_Wr1A_FlashDataIn = 0x68, //!< 8'b01101000 |
| whismanoid | 53:3d5a3d241a5e | 403 | CMD_0110_1010_d16_Rd1A_FlashDataIn = 0x6a, //!< 8'b01101010 |
| whismanoid | 53:3d5a3d241a5e | 404 | CMD_0110_1110_d16_Rd1B_FlashDataOut = 0x6e, //!< 8'b01101110 |
| whismanoid | 53:3d5a3d241a5e | 405 | } MAX11043_CMD_enum_t; |
| whismanoid | 53:3d5a3d241a5e | 406 | |
| whismanoid | 53:3d5a3d241a5e | 407 | // CODE GENERATOR: TypedefEnum MAX11043_STATUS_enum_t |
| whismanoid | 53:3d5a3d241a5e | 408 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 409 | /// CMD_0001_1110_d8_Rd_Status |
| whismanoid | 53:3d5a3d241a5e | 410 | /// regAddr=07h |
| whismanoid | 53:3d5a3d241a5e | 411 | /// Status: x x FlashBusy BOOT OFLGA OFLGB OFLGC OFLGD |
| whismanoid | 53:3d5a3d241a5e | 412 | typedef enum MAX11043_STATUS_enum_t { |
| whismanoid | 53:3d5a3d241a5e | 413 | STATUS_xxxx_xxx1_OverflowFlagOFLGD = 0x01, //!< 8'b00000001 |
| whismanoid | 53:3d5a3d241a5e | 414 | STATUS_xxxx_xx1x_OverflowFlagOFLGC = 0x02, //!< 8'b00000010 |
| whismanoid | 53:3d5a3d241a5e | 415 | STATUS_xxxx_x1xx_OverflowFlagOFLGB = 0x04, //!< 8'b00000100 |
| whismanoid | 53:3d5a3d241a5e | 416 | STATUS_xxxx_1xxx_OverflowFlagOFLGA = 0x08, //!< 8'b00001000 |
| whismanoid | 53:3d5a3d241a5e | 417 | STATUS_xxx1_xxxx_PowerOnResetBOOT = 0x10, //!< 8'b00010000 |
| whismanoid | 53:3d5a3d241a5e | 418 | STATUS_xx1x_xxxx_FlashBusy = 0x20, //!< 8'b00100000 |
| whismanoid | 53:3d5a3d241a5e | 419 | STATUS_x1xx_xxxx_RESERVED = 0x40, //!< 8'b01000000 |
| whismanoid | 53:3d5a3d241a5e | 420 | STATUS_1xxx_xxxx_RESERVED = 0x80, //!< 8'b10000000 |
| whismanoid | 53:3d5a3d241a5e | 421 | } MAX11043_STATUS_enum_t; |
| whismanoid | 53:3d5a3d241a5e | 422 | |
| whismanoid | 53:3d5a3d241a5e | 423 | // CODE GENERATOR: TypedefEnum MAX11043_CONFIG_enum_t |
| whismanoid | 53:3d5a3d241a5e | 424 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 425 | /// CMD_0010_0000_d16_Wr_Configuration |
| whismanoid | 53:3d5a3d241a5e | 426 | /// regAddr=08h |
| whismanoid | 53:3d5a3d241a5e | 427 | /// Config: EXTCLK CLKDIV1 CLKDIV0 PD PDA PDB PDC PDD PDDAC PDOSC 24BIT SCHANA SCHANB SCHANC SCHAND DECSEL |
| whismanoid | 53:3d5a3d241a5e | 428 | typedef enum MAX11043_CONFIG_enum_t { |
| whismanoid | 53:3d5a3d241a5e | 429 | CONFIG_xxxx_xxxx_xxxx_xxx1_DECSEL12 = 0x0001, //!< 16'b0000000000000001 |
| whismanoid | 53:3d5a3d241a5e | 430 | CONFIG_xxxx_xxxx_xxxx_xx1x_SCHAND = 0x0002, //!< 16'b0000000000000010 |
| whismanoid | 53:3d5a3d241a5e | 431 | CONFIG_xxxx_xxxx_xxxx_x1xx_SCHANC = 0x0004, //!< 16'b0000000000000100 |
| whismanoid | 53:3d5a3d241a5e | 432 | CONFIG_xxxx_xxxx_xxxx_1xxx_SCHANB = 0x0008, //!< 16'b0000000000001000 |
| whismanoid | 53:3d5a3d241a5e | 433 | CONFIG_xxxx_xxxx_xxx1_xxxx_SCHANA = 0x0010, //!< 16'b0000000000010000 |
| whismanoid | 53:3d5a3d241a5e | 434 | CONFIG_xxxx_xxxx_xx1x_xxxx_24BIT = 0x0020, //!< 16'b0000000000100000 |
| whismanoid | 53:3d5a3d241a5e | 435 | CONFIG_xxxx_xxxx_x1xx_xxxx_PDOSC = 0x0040, //!< 16'b0000000001000000 |
| whismanoid | 53:3d5a3d241a5e | 436 | CONFIG_xxxx_xxxx_1xxx_xxxx_PDDAC = 0x0080, //!< 16'b0000000010000000 |
| whismanoid | 53:3d5a3d241a5e | 437 | CONFIG_xxxx_xxx1_xxxx_xxxx_PDD = 0x0100, //!< 16'b0000000100000000 |
| whismanoid | 53:3d5a3d241a5e | 438 | CONFIG_xxxx_xx1x_xxxx_xxxx_PDC = 0x0200, //!< 16'b0000001000000000 |
| whismanoid | 53:3d5a3d241a5e | 439 | CONFIG_xxxx_x1xx_xxxx_xxxx_PDB = 0x0400, //!< 16'b0000010000000000 |
| whismanoid | 53:3d5a3d241a5e | 440 | CONFIG_xxxx_1xxx_xxxx_xxxx_PDA = 0x0800, //!< 16'b0000100000000000 |
| whismanoid | 53:3d5a3d241a5e | 441 | CONFIG_xxx1_xxxx_xxxx_xxxx_PD = 0x1000, //!< 16'b0001000000000000 |
| whismanoid | 53:3d5a3d241a5e | 442 | CONFIG_xx1x_xxxx_xxxx_xxxx_CLKDIV0 = 0x2000, //!< 16'b0010000000000000 |
| whismanoid | 53:3d5a3d241a5e | 443 | CONFIG_x1xx_xxxx_xxxx_xxxx_CLKDIV1 = 0x4000, //!< 16'b0100000000000000 |
| whismanoid | 53:3d5a3d241a5e | 444 | CONFIG_1xxx_xxxx_xxxx_xxxx_EXTCLK = 0x8000, //!< 16'b1000000000000000 |
| whismanoid | 53:3d5a3d241a5e | 445 | } MAX11043_CONFIG_enum_t; |
| whismanoid | 52:607010f0c54e | 446 | |
| whismanoid | 53:3d5a3d241a5e | 447 | // CODE GENERATOR: TypedefEnum MAX11043_CONFIGABCD_enum_t |
| whismanoid | 53:3d5a3d241a5e | 448 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 449 | /// CMD_0011_0000_d16_Wr_CONFIGa |
| whismanoid | 53:3d5a3d241a5e | 450 | /// CMD_0011_0100_d16_Wr_CONFIGb |
| whismanoid | 53:3d5a3d241a5e | 451 | /// CMD_0011_1000_d16_Wr_CONFIGc |
| whismanoid | 53:3d5a3d241a5e | 452 | /// CMD_0011_1100_d16_Wr_CONFIGd |
| whismanoid | 53:3d5a3d241a5e | 453 | /// regAddr=0Ch |
| whismanoid | 53:3d5a3d241a5e | 454 | /// regAddr=0Dh |
| whismanoid | 53:3d5a3d241a5e | 455 | /// regAddr=0Eh |
| whismanoid | 53:3d5a3d241a5e | 456 | /// regAddr=0Fh |
| whismanoid | 53:3d5a3d241a5e | 457 | /// ConfigABCD: x x x BDAC[3:0] DIFF EQ MODG[1:0] PDPGA FILT PGAG ENBIASP ENBIASN |
| whismanoid | 53:3d5a3d241a5e | 458 | typedef enum MAX11043_CONFIGABCD_enum_t { |
| whismanoid | 53:3d5a3d241a5e | 459 | CONFIGABCD_xxxx_xxxx_xxxx_xxx1_ENBIASN = 0x0001, //!< 16'b0000000000000001 |
| whismanoid | 53:3d5a3d241a5e | 460 | CONFIGABCD_xxxx_xxxx_xxxx_xx1x_ENBIASP = 0x0002, //!< 16'b0000000000000010 |
| whismanoid | 53:3d5a3d241a5e | 461 | CONFIGABCD_xxxx_xxxx_xxxx_x1xx_PGAG16 = 0x0004, //!< 16'b0000000000000100 |
| whismanoid | 53:3d5a3d241a5e | 462 | CONFIGABCD_xxxx_xxxx_xxxx_1xxx_FILTLP = 0x0008, //!< 16'b0000000000001000 |
| whismanoid | 53:3d5a3d241a5e | 463 | CONFIGABCD_xxxx_xxxx_xxx1_xxxx_PDPGA = 0x0010, //!< 16'b0000000000010000 |
| whismanoid | 53:3d5a3d241a5e | 464 | CONFIGABCD_xxxx_xxxx_xx1x_xxxx_MODG0 = 0x0020, //!< 16'b0000000000100000 |
| whismanoid | 53:3d5a3d241a5e | 465 | CONFIGABCD_xxxx_xxxx_x1xx_xxxx_MODG1 = 0x0040, //!< 16'b0000000001000000 |
| whismanoid | 53:3d5a3d241a5e | 466 | CONFIGABCD_xxxx_xxxx_1xxx_xxxx_EQ = 0x0080, //!< 16'b0000000010000000 |
| whismanoid | 53:3d5a3d241a5e | 467 | CONFIGABCD_xxxx_xxx1_xxxx_xxxx_DIFF = 0x0100, //!< 16'b0000000100000000 |
| whismanoid | 53:3d5a3d241a5e | 468 | CONFIGABCD_xxxx_xx1x_xxxx_xxxx_BDAC0 = 0x0200, //!< 16'b0000001000000000 |
| whismanoid | 53:3d5a3d241a5e | 469 | CONFIGABCD_xxxx_x1xx_xxxx_xxxx_BDAC1 = 0x0400, //!< 16'b0000010000000000 |
| whismanoid | 53:3d5a3d241a5e | 470 | CONFIGABCD_xxxx_1xxx_xxxx_xxxx_BDAC2 = 0x0800, //!< 16'b0000100000000000 |
| whismanoid | 53:3d5a3d241a5e | 471 | CONFIGABCD_xxx1_xxxx_xxxx_xxxx_BDAC3 = 0x1000, //!< 16'b0001000000000000 |
| whismanoid | 53:3d5a3d241a5e | 472 | CONFIGABCD_xx1x_xxxx_xxxx_xxxx_RESERVED = 0x2000, //!< 16'b0010000000000000 |
| whismanoid | 53:3d5a3d241a5e | 473 | CONFIGABCD_x1xx_xxxx_xxxx_xxxx_RESERVED = 0x4000, //!< 16'b0100000000000000 |
| whismanoid | 53:3d5a3d241a5e | 474 | CONFIGABCD_1xxx_xxxx_xxxx_xxxx_RESERVED = 0x8000, //!< 16'b1000000000000000 |
| whismanoid | 53:3d5a3d241a5e | 475 | } MAX11043_CONFIGABCD_enum_t; |
| whismanoid | 53:3d5a3d241a5e | 476 | |
| whismanoid | 53:3d5a3d241a5e | 477 | // CODE GENERATOR: TypedefEnum MAX11043_BDAC_enum_t |
| whismanoid | 53:3d5a3d241a5e | 478 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 479 | /// CMD_0011_0000_d16_Wr_CONFIGa |
| whismanoid | 53:3d5a3d241a5e | 480 | /// CMD_0011_0100_d16_Wr_CONFIGb |
| whismanoid | 53:3d5a3d241a5e | 481 | /// CMD_0011_1000_d16_Wr_CONFIGc |
| whismanoid | 53:3d5a3d241a5e | 482 | /// CMD_0011_1100_d16_Wr_CONFIGd |
| whismanoid | 53:3d5a3d241a5e | 483 | /// CONFIGABCD_xxx1_xxxx_xxxx_xxxx_BDAC3 |
| whismanoid | 53:3d5a3d241a5e | 484 | /// CONFIGABCD_xxxx_1xxx_xxxx_xxxx_BDAC2 |
| whismanoid | 53:3d5a3d241a5e | 485 | /// CONFIGABCD_xxxx_x1xx_xxxx_xxxx_BDAC1 |
| whismanoid | 53:3d5a3d241a5e | 486 | /// CONFIGABCD_xxxx_xx1x_xxxx_xxxx_BDAC0 |
| whismanoid | 53:3d5a3d241a5e | 487 | /// Sets the input bias voltage for AC-coupled signals when ENBIAS_ is set to 1. |
| whismanoid | 53:3d5a3d241a5e | 488 | /// regAddr=0Ch |
| whismanoid | 53:3d5a3d241a5e | 489 | /// regAddr=0Dh |
| whismanoid | 53:3d5a3d241a5e | 490 | /// regAddr=0Eh |
| whismanoid | 53:3d5a3d241a5e | 491 | /// regAddr=0Fh |
| whismanoid | 53:3d5a3d241a5e | 492 | /// ConfigABCD: x x x BDAC[3:0] DIFF EQ MODG[1:0] PDPGA FILT PGAG ENBIASP ENBIASN |
| whismanoid | 53:3d5a3d241a5e | 493 | typedef enum MAX11043_BDAC_enum_t { |
| whismanoid | 53:3d5a3d241a5e | 494 | BDAC_0000_033pctAVDD = 0x00, //!< 8'b00000000 |
| whismanoid | 53:3d5a3d241a5e | 495 | BDAC_0001_035pctAVDD = 0x01, //!< 8'b00000001 |
| whismanoid | 53:3d5a3d241a5e | 496 | BDAC_0010_038pctAVDD = 0x02, //!< 8'b00000010 |
| whismanoid | 53:3d5a3d241a5e | 497 | BDAC_0011_040pctAVDD = 0x03, //!< 8'b00000011 |
| whismanoid | 53:3d5a3d241a5e | 498 | BDAC_0100_042pctAVDD = 0x04, //!< 8'b00000100 |
| whismanoid | 53:3d5a3d241a5e | 499 | BDAC_0101_044pctAVDD = 0x05, //!< 8'b00000101 |
| whismanoid | 53:3d5a3d241a5e | 500 | BDAC_0110_046pctAVDD = 0x06, //!< 8'b00000110 |
| whismanoid | 53:3d5a3d241a5e | 501 | BDAC_0111_048pctAVDD = 0x07, //!< 8'b00000111 |
| whismanoid | 53:3d5a3d241a5e | 502 | BDAC_1000_050pctAVDD = 0x08, //!< 8'b00001000 |
| whismanoid | 53:3d5a3d241a5e | 503 | BDAC_1001_052pctAVDD = 0x09, //!< 8'b00001001 |
| whismanoid | 53:3d5a3d241a5e | 504 | BDAC_1010_054pctAVDD = 0x0a, //!< 8'b00001010 |
| whismanoid | 53:3d5a3d241a5e | 505 | BDAC_1011_056pctAVDD = 0x0b, //!< 8'b00001011 |
| whismanoid | 53:3d5a3d241a5e | 506 | BDAC_1100_058pctAVDD = 0x0c, //!< 8'b00001100 |
| whismanoid | 53:3d5a3d241a5e | 507 | BDAC_1101_060pctAVDD = 0x0d, //!< 8'b00001101 |
| whismanoid | 53:3d5a3d241a5e | 508 | BDAC_1110_062pctAVDD = 0x0e, //!< 8'b00001110 |
| whismanoid | 53:3d5a3d241a5e | 509 | BDAC_1111_065pctAVDD = 0x0f, //!< 8'b00001111 |
| whismanoid | 53:3d5a3d241a5e | 510 | } MAX11043_BDAC_enum_t; |
| whismanoid | 53:3d5a3d241a5e | 511 | |
| whismanoid | 53:3d5a3d241a5e | 512 | // CODE GENERATOR: TypedefEnum MAX11043_REFERENCE_enum_t |
| whismanoid | 53:3d5a3d241a5e | 513 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 514 | /// CMD_0100_0000_d16_Wr_Reference |
| whismanoid | 53:3d5a3d241a5e | 515 | /// regAddr=10h |
| whismanoid | 53:3d5a3d241a5e | 516 | /// ReferenceDelay: 0 0 0 PURGE[4:0] EXTREF EXBUFA EXBUFB EXBUFC EXBUFD EXBUFDAC EXBUFDACH EXBUFDACL |
| whismanoid | 53:3d5a3d241a5e | 517 | typedef enum MAX11043_REFERENCE_enum_t { |
| whismanoid | 53:3d5a3d241a5e | 518 | REFERENCE_xxxx_xxxx_xxxx_xxx1_EXBUFDACL = 0x0001, //!< 16'b0000000000000001 |
| whismanoid | 53:3d5a3d241a5e | 519 | REFERENCE_xxxx_xxxx_xxxx_xx1x_EXBUFDACH = 0x0002, //!< 16'b0000000000000010 |
| whismanoid | 53:3d5a3d241a5e | 520 | REFERENCE_xxxx_xxxx_xxxx_x1xx_EXBUFDAC = 0x0004, //!< 16'b0000000000000100 |
| whismanoid | 53:3d5a3d241a5e | 521 | REFERENCE_xxxx_xxxx_xxxx_1xxx_EXBUFD = 0x0008, //!< 16'b0000000000001000 |
| whismanoid | 53:3d5a3d241a5e | 522 | REFERENCE_xxxx_xxxx_xxx1_xxxx_EXBUFC = 0x0010, //!< 16'b0000000000010000 |
| whismanoid | 53:3d5a3d241a5e | 523 | REFERENCE_xxxx_xxxx_xx1x_xxxx_EXBUFB = 0x0020, //!< 16'b0000000000100000 |
| whismanoid | 53:3d5a3d241a5e | 524 | REFERENCE_xxxx_xxxx_x1xx_xxxx_EXBUFA = 0x0040, //!< 16'b0000000001000000 |
| whismanoid | 53:3d5a3d241a5e | 525 | REFERENCE_xxxx_xxxx_1xxx_xxxx_EXTREF = 0x0080, //!< 16'b0000000010000000 |
| whismanoid | 53:3d5a3d241a5e | 526 | REFERENCE_xxxx_xxx1_xxxx_xxxx_PURGE0 = 0x0100, //!< 16'b0000000100000000 |
| whismanoid | 53:3d5a3d241a5e | 527 | REFERENCE_xxxx_xx1x_xxxx_xxxx_PURGE1 = 0x0200, //!< 16'b0000001000000000 |
| whismanoid | 53:3d5a3d241a5e | 528 | REFERENCE_xxxx_x1xx_xxxx_xxxx_PURGE2 = 0x0400, //!< 16'b0000010000000000 |
| whismanoid | 53:3d5a3d241a5e | 529 | REFERENCE_xxxx_1xxx_xxxx_xxxx_PURGE3 = 0x0800, //!< 16'b0000100000000000 |
| whismanoid | 53:3d5a3d241a5e | 530 | REFERENCE_xxx1_xxxx_xxxx_xxxx_PURGE4 = 0x1000, //!< 16'b0001000000000000 |
| whismanoid | 53:3d5a3d241a5e | 531 | REFERENCE_xx1x_xxxx_xxxx_xxxx_RESERVED = 0x2000, //!< 16'b0010000000000000 |
| whismanoid | 53:3d5a3d241a5e | 532 | REFERENCE_x1xx_xxxx_xxxx_xxxx_RESERVED = 0x4000, //!< 16'b0100000000000000 |
| whismanoid | 53:3d5a3d241a5e | 533 | REFERENCE_1xxx_xxxx_xxxx_xxxx_RESERVED = 0x8000, //!< 16'b1000000000000000 |
| whismanoid | 53:3d5a3d241a5e | 534 | } MAX11043_REFERENCE_enum_t; |
| whismanoid | 53:3d5a3d241a5e | 535 | |
| whismanoid | 53:3d5a3d241a5e | 536 | // TODO1: CODE GENERATOR: ic_variant -- IC's supported with this driver |
| whismanoid | 53:3d5a3d241a5e | 537 | /** |
| whismanoid | 53:3d5a3d241a5e | 538 | * @brief IC's supported with this driver |
| whismanoid | 53:3d5a3d241a5e | 539 | * @details MAX11043 |
| whismanoid | 53:3d5a3d241a5e | 540 | */ |
| whismanoid | 53:3d5a3d241a5e | 541 | typedef enum |
| whismanoid | 53:3d5a3d241a5e | 542 | { |
| whismanoid | 53:3d5a3d241a5e | 543 | MAX11043_IC = 0, |
| whismanoid | 53:3d5a3d241a5e | 544 | //MAX11043_IC = 1 |
| whismanoid | 53:3d5a3d241a5e | 545 | } MAX11043_ic_t; |
| whismanoid | 53:3d5a3d241a5e | 546 | |
| whismanoid | 53:3d5a3d241a5e | 547 | // TODO1: CODE GENERATOR: class constructor declaration |
| whismanoid | 53:3d5a3d241a5e | 548 | /**********************************************************//** |
| whismanoid | 53:3d5a3d241a5e | 549 | * @brief Constructor for MAX11043 Class. |
| whismanoid | 53:3d5a3d241a5e | 550 | * |
| whismanoid | 53:3d5a3d241a5e | 551 | * @details Requires an existing SPI object as well as a DigitalOut object. |
| whismanoid | 53:3d5a3d241a5e | 552 | * The DigitalOut object is used for a chip enable signal |
| whismanoid | 53:3d5a3d241a5e | 553 | * |
| whismanoid | 53:3d5a3d241a5e | 554 | * On Entry: |
| whismanoid | 53:3d5a3d241a5e | 555 | * @param[in] spi - pointer to existing SPI object |
| whismanoid | 53:3d5a3d241a5e | 556 | * @param[in] cs_pin - pointer to a DigitalOut pin object |
| whismanoid | 53:3d5a3d241a5e | 557 | * CODE GENERATOR: class constructor docstrings gpio InputPin pins |
| whismanoid | 53:3d5a3d241a5e | 558 | * @param[in] CONVRUN_pin - pointer to a DigitalOut pin object |
| whismanoid | 53:3d5a3d241a5e | 559 | * @param[in] SHDN_pin - pointer to a DigitalOut pin object |
| whismanoid | 53:3d5a3d241a5e | 560 | * @param[in] DACSTEP_pin - pointer to a DigitalOut pin object |
| whismanoid | 53:3d5a3d241a5e | 561 | * @param[in] UP_slash_DWNb_pin - pointer to a DigitalOut pin object |
| whismanoid | 53:3d5a3d241a5e | 562 | * CODE GENERATOR: class constructor docstrings gpio OutputPin pins |
| whismanoid | 53:3d5a3d241a5e | 563 | * @param[in] EOC_pin - pointer to a DigitalIn pin object |
| whismanoid | 53:3d5a3d241a5e | 564 | * @param[in] ic_variant - which type of MAX11043 is used |
| whismanoid | 53:3d5a3d241a5e | 565 | * |
| whismanoid | 53:3d5a3d241a5e | 566 | * On Exit: |
| whismanoid | 53:3d5a3d241a5e | 567 | * |
| whismanoid | 53:3d5a3d241a5e | 568 | * @return None |
| whismanoid | 53:3d5a3d241a5e | 569 | **************************************************************/ |
| whismanoid | 53:3d5a3d241a5e | 570 | MAX11043(SPI &spi, DigitalOut &cs_pin, // SPI interface |
| whismanoid | 53:3d5a3d241a5e | 571 | // CODE GENERATOR: class constructor declaration gpio InputPin pins |
| whismanoid | 53:3d5a3d241a5e | 572 | DigitalOut &CONVRUN_pin, // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 573 | DigitalOut &SHDN_pin, // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 574 | DigitalOut &DACSTEP_pin, // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 575 | DigitalOut &UP_slash_DWNb_pin, // Digital Configuration Input to MAX11043 device |
| whismanoid | 53:3d5a3d241a5e | 576 | // CODE GENERATOR: class constructor declaration gpio OutputPin pins |
| whismanoid | 69:989e392cf635 | 577 | // MAX11043 ADC Read operations must be synchronized to EOC End Of Conversion |
| whismanoid | 69:989e392cf635 | 578 | #if MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 579 | // MAX11043 EOC End Of Conversion input should be InterruptIn(PinName:EOC_pin).fall(onEOCFallingEdge); |
| whismanoid | 69:989e392cf635 | 580 | // Workaround using DigitalIn(PinName:EOC_pin) polled to sync with EOC falling edge for ADC reads |
| whismanoid | 69:989e392cf635 | 581 | // TODO: onEOCFallingEdge: replace DigitalIn &EOC_pin with PinName EOC_pin, so that I can create an InterruptIn(PinName:EOC_pin) |
| whismanoid | 53:3d5a3d241a5e | 582 | DigitalIn &EOC_pin, // Digital Event Output from MAX11043 device |
| whismanoid | 69:989e392cf635 | 583 | #else // MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 69:989e392cf635 | 584 | // MAX11043 EOC End Of Conversion input is InterruptIn(PinName:EOC_pin).fall(onEOCFallingEdge); |
| whismanoid | 69:989e392cf635 | 585 | InterruptIn &EOC_pin, // Digital Event Output from MAX11043 device |
| whismanoid | 69:989e392cf635 | 586 | #endif // MAX11043_EOC_INTERRUPT_POLLING |
| whismanoid | 53:3d5a3d241a5e | 587 | MAX11043_ic_t ic_variant); |
| whismanoid | 53:3d5a3d241a5e | 588 | |
| whismanoid | 53:3d5a3d241a5e | 589 | // CODE GENERATOR: class destructor declaration |
| whismanoid | 53:3d5a3d241a5e | 590 | /************************************************************ |
| whismanoid | 53:3d5a3d241a5e | 591 | * @brief Default destructor for MAX11043 Class. |
| whismanoid | 53:3d5a3d241a5e | 592 | * |
| whismanoid | 53:3d5a3d241a5e | 593 | * @details Destroys SPI object if owner |
| whismanoid | 53:3d5a3d241a5e | 594 | * |
| whismanoid | 53:3d5a3d241a5e | 595 | * On Entry: |
| whismanoid | 53:3d5a3d241a5e | 596 | * |
| whismanoid | 53:3d5a3d241a5e | 597 | * On Exit: |
| whismanoid | 53:3d5a3d241a5e | 598 | * |
| whismanoid | 53:3d5a3d241a5e | 599 | * @return None |
| whismanoid | 53:3d5a3d241a5e | 600 | **************************************************************/ |
| whismanoid | 53:3d5a3d241a5e | 601 | ~MAX11043(); |
| whismanoid | 53:3d5a3d241a5e | 602 | |
| whismanoid | 53:3d5a3d241a5e | 603 | // CODE GENERATOR: Declare SPI diagnostic function pointer void onSPIprint() |
| whismanoid | 53:3d5a3d241a5e | 604 | /// Function pointer void f(size_t byteCount, uint8_t mosiData[], uint8_t misoData[]) |
| whismanoid | 53:3d5a3d241a5e | 605 | Callback<void(size_t, uint8_t*, uint8_t*)> onSPIprint; //!< optional @ref onSPIprint SPI diagnostic function |
| whismanoid | 53:3d5a3d241a5e | 606 | |
| whismanoid | 53:3d5a3d241a5e | 607 | // CODE GENERATOR: spi_frequency setter declaration |
| whismanoid | 53:3d5a3d241a5e | 608 | /// set SPI SCLK frequency |
| whismanoid | 53:3d5a3d241a5e | 609 | void spi_frequency(int spi_sclk_Hz); |
| whismanoid | 53:3d5a3d241a5e | 610 | |
| whismanoid | 53:3d5a3d241a5e | 611 | // CODE GENERATOR: spi_frequency getter declaration and definition |
| whismanoid | 53:3d5a3d241a5e | 612 | /// get SPI SCLK frequency |
| whismanoid | 53:3d5a3d241a5e | 613 | int get_spi_frequency() const { return m_SPI_SCLK_Hz; } |
| whismanoid | 53:3d5a3d241a5e | 614 | |
| whismanoid | 53:3d5a3d241a5e | 615 | // CODE GENERATOR: spi_dataMode getter declaration and definition |
| whismanoid | 53:3d5a3d241a5e | 616 | /// get SPI mode |
| whismanoid | 53:3d5a3d241a5e | 617 | int get_spi_dataMode() const { return m_SPI_dataMode; } |
| whismanoid | 53:3d5a3d241a5e | 618 | |
| whismanoid | 53:3d5a3d241a5e | 619 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 620 | // CODE GENERATOR: omit typedef enum MAX11043_device_t, class members instead of global device object |
| whismanoid | 53:3d5a3d241a5e | 621 | public: |
| whismanoid | 53:3d5a3d241a5e | 622 | |
| whismanoid | 59:47538bcf6cda | 623 | /// reference voltage, in Volts |
| whismanoid | 59:47538bcf6cda | 624 | double VRef; |
| whismanoid | 53:3d5a3d241a5e | 625 | |
| whismanoid | 59:47538bcf6cda | 626 | /// shadow of register config CMD_0010_0010_d16_Rd08_Configuration |
| whismanoid | 59:47538bcf6cda | 627 | uint16_t config; |
| whismanoid | 53:3d5a3d241a5e | 628 | |
| whismanoid | 59:47538bcf6cda | 629 | /// shadow of register status CMD_0001_1110_d8_Rd07_Status |
| whismanoid | 53:3d5a3d241a5e | 630 | uint32_t status; |
| whismanoid | 53:3d5a3d241a5e | 631 | |
| whismanoid | 59:47538bcf6cda | 632 | /// shadow of register ADCa CMD_0000_0010_d16o8_Rd00_ADCa |
| whismanoid | 59:47538bcf6cda | 633 | uint32_t adca; |
| whismanoid | 59:47538bcf6cda | 634 | |
| whismanoid | 59:47538bcf6cda | 635 | /// shadow of register ADCb CMD_0000_0110_d16o8_Rd01_ADCb |
| whismanoid | 59:47538bcf6cda | 636 | uint32_t adcb; |
| whismanoid | 53:3d5a3d241a5e | 637 | |
| whismanoid | 59:47538bcf6cda | 638 | /// shadow of register ADCc CMD_0000_1010_d16o8_Rd02_ADCc |
| whismanoid | 59:47538bcf6cda | 639 | uint32_t adcc; |
| whismanoid | 59:47538bcf6cda | 640 | |
| whismanoid | 59:47538bcf6cda | 641 | /// shadow of register ADCd CMD_0000_1110_d16o8_Rd03_ADCd |
| whismanoid | 59:47538bcf6cda | 642 | uint32_t adcd; |
| whismanoid | 53:3d5a3d241a5e | 643 | |
| whismanoid | 53:3d5a3d241a5e | 644 | // CODE GENERATOR: omit global g_MAX11043_device |
| whismanoid | 53:3d5a3d241a5e | 645 | |
| whismanoid | 53:3d5a3d241a5e | 646 | // CODE GENERATOR: extern function declarations |
| whismanoid | 53:3d5a3d241a5e | 647 | // CODE GENERATOR: extern function declaration SPIoutputCS |
| whismanoid | 53:3d5a3d241a5e | 648 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 649 | // Assert SPI Chip Select |
| whismanoid | 53:3d5a3d241a5e | 650 | // SPI chip-select for MAX11043 |
| whismanoid | 53:3d5a3d241a5e | 651 | // |
| whismanoid | 53:3d5a3d241a5e | 652 | void SPIoutputCS(int isLogicHigh); |
| whismanoid | 53:3d5a3d241a5e | 653 | |
| whismanoid | 62:8223a7253c90 | 654 | // CODE GENERATOR: extern function declaration SPIreadWriteWithLowCS |
| whismanoid | 62:8223a7253c90 | 655 | //---------------------------------------- |
| whismanoid | 62:8223a7253c90 | 656 | // SPI read and write arbitrary number of 8-bit bytes |
| whismanoid | 62:8223a7253c90 | 657 | // SPI interface to MAX11043 shift mosiData into MAX11043 DIN |
| whismanoid | 62:8223a7253c90 | 658 | // while simultaneously capturing miso data from MAX11043 DOUT |
| whismanoid | 62:8223a7253c90 | 659 | // |
| whismanoid | 62:8223a7253c90 | 660 | int SPIreadWriteWithLowCS(size_t byteCount, uint8_t mosiData[], uint8_t misoData[]); |
| whismanoid | 62:8223a7253c90 | 661 | |
| whismanoid | 53:3d5a3d241a5e | 662 | // CODE GENERATOR: extern function declaration SHDNoutputValue |
| whismanoid | 53:3d5a3d241a5e | 663 | //---------------------------------------- |
| whismanoid | 58:2fea32db466b | 664 | // Assert MAX11043 SHDN pin : High = Shut Down, Low = Normal Operation. |
| whismanoid | 53:3d5a3d241a5e | 665 | // |
| whismanoid | 53:3d5a3d241a5e | 666 | void SHDNoutputValue(int isLogicHigh); |
| whismanoid | 53:3d5a3d241a5e | 667 | |
| whismanoid | 53:3d5a3d241a5e | 668 | // CODE GENERATOR: extern function declaration CONVRUNoutputValue |
| whismanoid | 53:3d5a3d241a5e | 669 | //---------------------------------------- |
| whismanoid | 58:2fea32db466b | 670 | // Assert MAX11043 CONVRUN pin : High = start continuous conversions on all 4 channels, Low = Idle. |
| whismanoid | 53:3d5a3d241a5e | 671 | // |
| whismanoid | 53:3d5a3d241a5e | 672 | void CONVRUNoutputValue(int isLogicHigh); |
| whismanoid | 53:3d5a3d241a5e | 673 | |
| whismanoid | 53:3d5a3d241a5e | 674 | // CODE GENERATOR: extern function declaration DACSTEPoutputValue |
| whismanoid | 53:3d5a3d241a5e | 675 | //---------------------------------------- |
| whismanoid | 58:2fea32db466b | 676 | // Assert MAX11043 DACSTEP pin : High = Active, Low = Idle. |
| whismanoid | 53:3d5a3d241a5e | 677 | // |
| whismanoid | 53:3d5a3d241a5e | 678 | void DACSTEPoutputValue(int isLogicHigh); |
| whismanoid | 53:3d5a3d241a5e | 679 | |
| whismanoid | 53:3d5a3d241a5e | 680 | // CODE GENERATOR: extern function declaration UP_slash_DWNboutputValue |
| whismanoid | 53:3d5a3d241a5e | 681 | //---------------------------------------- |
| whismanoid | 58:2fea32db466b | 682 | // Assert MAX11043 UP_slash_DWNb pin : High = Up, Low = Down. |
| whismanoid | 53:3d5a3d241a5e | 683 | // |
| whismanoid | 53:3d5a3d241a5e | 684 | void UP_slash_DWNboutputValue(int isLogicHigh); |
| whismanoid | 53:3d5a3d241a5e | 685 | |
| whismanoid | 53:3d5a3d241a5e | 686 | // CODE GENERATOR: extern function declaration EOCinputWaitUntilLow |
| whismanoid | 53:3d5a3d241a5e | 687 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 688 | // Wait for MAX11043 EOC pin low, indicating end of conversion. |
| whismanoid | 53:3d5a3d241a5e | 689 | // Required when using any of the InternalClock modes. |
| whismanoid | 53:3d5a3d241a5e | 690 | // |
| whismanoid | 53:3d5a3d241a5e | 691 | void EOCinputWaitUntilLow(); |
| whismanoid | 53:3d5a3d241a5e | 692 | |
| whismanoid | 53:3d5a3d241a5e | 693 | // CODE GENERATOR: extern function declaration EOCinputValue |
| whismanoid | 53:3d5a3d241a5e | 694 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 695 | // Return the status of the MAX11043 EOC pin. |
| whismanoid | 53:3d5a3d241a5e | 696 | // |
| whismanoid | 53:3d5a3d241a5e | 697 | int EOCinputValue(); |
| whismanoid | 53:3d5a3d241a5e | 698 | |
| whismanoid | 53:3d5a3d241a5e | 699 | // CODE GENERATOR: class member data |
| whismanoid | 53:3d5a3d241a5e | 700 | private: |
| whismanoid | 53:3d5a3d241a5e | 701 | // CODE GENERATOR: class member data for SPI interface |
| whismanoid | 53:3d5a3d241a5e | 702 | // SPI object |
| whismanoid | 53:3d5a3d241a5e | 703 | SPI &m_spi; |
| whismanoid | 53:3d5a3d241a5e | 704 | int m_SPI_SCLK_Hz; |
| whismanoid | 53:3d5a3d241a5e | 705 | int m_SPI_dataMode; |
| whismanoid | 53:3d5a3d241a5e | 706 | int m_SPI_cs_state; |
| whismanoid | 53:3d5a3d241a5e | 707 | |
| whismanoid | 53:3d5a3d241a5e | 708 | // Selector pin object |
| whismanoid | 53:3d5a3d241a5e | 709 | DigitalOut &m_cs_pin; |
| whismanoid | 53:3d5a3d241a5e | 710 | |
| whismanoid | 53:3d5a3d241a5e | 711 | // CODE GENERATOR: class member data for gpio InputPin pins |
| whismanoid | 53:3d5a3d241a5e | 712 | // InputPin Name = CONVRUN |
| whismanoid | 53:3d5a3d241a5e | 713 | // InputPin Description = CONVRUN (digital input). Convert Run. Drive high to start continuous conversions on all 4 channels. The device is idle when |
| whismanoid | 53:3d5a3d241a5e | 714 | // CONVRUN is low. |
| whismanoid | 53:3d5a3d241a5e | 715 | // InputPin Function = Configuration |
| whismanoid | 53:3d5a3d241a5e | 716 | DigitalOut &m_CONVRUN_pin; |
| whismanoid | 53:3d5a3d241a5e | 717 | // |
| whismanoid | 53:3d5a3d241a5e | 718 | // InputPin Name = SHDN |
| whismanoid | 53:3d5a3d241a5e | 719 | // InputPin Description = Shutdown (digital input). Active-High Shutdown Input. Drive high to shut down the MAX11043. |
| whismanoid | 53:3d5a3d241a5e | 720 | // InputPin Function = Configuration |
| whismanoid | 53:3d5a3d241a5e | 721 | DigitalOut &m_SHDN_pin; |
| whismanoid | 53:3d5a3d241a5e | 722 | // |
| whismanoid | 53:3d5a3d241a5e | 723 | // InputPin Name = DACSTEP |
| whismanoid | 53:3d5a3d241a5e | 724 | // InputPin Description = DACSTEP (digital input). DAC Step Input. Drive high to move the DAC output in the direction of UP/DWN on the next rising |
| whismanoid | 53:3d5a3d241a5e | 725 | // edge of the system clock. |
| whismanoid | 53:3d5a3d241a5e | 726 | // InputPin Function = Configuration |
| whismanoid | 53:3d5a3d241a5e | 727 | DigitalOut &m_DACSTEP_pin; |
| whismanoid | 53:3d5a3d241a5e | 728 | // |
| whismanoid | 53:3d5a3d241a5e | 729 | // InputPin Name = UP/DWN# |
| whismanoid | 53:3d5a3d241a5e | 730 | // InputPin Description = UP/DWN# (digital input). DAC Step Direction Select. Drive high to step up, drive low to step down when DACSTEP is toggled. |
| whismanoid | 53:3d5a3d241a5e | 731 | // InputPin Function = Configuration |
| whismanoid | 53:3d5a3d241a5e | 732 | DigitalOut &m_UP_slash_DWNb_pin; |
| whismanoid | 53:3d5a3d241a5e | 733 | // |
| whismanoid | 53:3d5a3d241a5e | 734 | // CODE GENERATOR: class member data for gpio OutputPin pins |
| whismanoid | 53:3d5a3d241a5e | 735 | // OutputPin Name = EOC |
| whismanoid | 53:3d5a3d241a5e | 736 | // OutputPin Description = End of Conversion Output. Active-Low End-of-Conversion Indicator. EOC asserts low to indicate that new data is ready. |
| whismanoid | 53:3d5a3d241a5e | 737 | // OutputPin Function = Event |
| whismanoid | 53:3d5a3d241a5e | 738 | DigitalIn &m_EOC_pin; |
| whismanoid | 53:3d5a3d241a5e | 739 | // |
| whismanoid | 53:3d5a3d241a5e | 740 | |
| whismanoid | 53:3d5a3d241a5e | 741 | // Identifies which IC variant is being used |
| whismanoid | 53:3d5a3d241a5e | 742 | MAX11043_ic_t m_ic_variant; |
| whismanoid | 53:3d5a3d241a5e | 743 | |
| whismanoid | 53:3d5a3d241a5e | 744 | public: |
| whismanoid | 53:3d5a3d241a5e | 745 | |
| whismanoid | 53:3d5a3d241a5e | 746 | // CODE GENERATOR: class member function declarations |
| whismanoid | 53:3d5a3d241a5e | 747 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 748 | /// Menu item '!' |
| whismanoid | 53:3d5a3d241a5e | 749 | /// Initialize device |
| whismanoid | 53:3d5a3d241a5e | 750 | /// @return 1 on success; 0 on failure |
| whismanoid | 53:3d5a3d241a5e | 751 | uint8_t Init(void); |
| whismanoid | 53:3d5a3d241a5e | 752 | |
| whismanoid | 53:3d5a3d241a5e | 753 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 53:3d5a3d241a5e | 754 | // CODE GENERATOR: looks like this is a 'write' register access function |
| whismanoid | 53:3d5a3d241a5e | 755 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 756 | /// Write a MAX11043 register. |
| whismanoid | 53:3d5a3d241a5e | 757 | /// |
| whismanoid | 57:1c9da8e90737 | 758 | /// CMDOP_1aaa_aaaa_ReadRegister bit is cleared 0 indicating a write operation. |
| whismanoid | 53:3d5a3d241a5e | 759 | /// |
| whismanoid | 53:3d5a3d241a5e | 760 | /// MAX11043 register length can be determined by function RegSize. |
| whismanoid | 53:3d5a3d241a5e | 761 | /// |
| whismanoid | 53:3d5a3d241a5e | 762 | /// For 8-bit register size: |
| whismanoid | 53:3d5a3d241a5e | 763 | /// |
| whismanoid | 53:3d5a3d241a5e | 764 | /// SPI 16-bit transfer |
| whismanoid | 53:3d5a3d241a5e | 765 | /// |
| whismanoid | 53:3d5a3d241a5e | 766 | /// SPI MOSI = 0aaa_aaaa_dddd_dddd |
| whismanoid | 53:3d5a3d241a5e | 767 | /// |
| whismanoid | 53:3d5a3d241a5e | 768 | /// SPI MISO = xxxx_xxxx_xxxx_xxxx |
| whismanoid | 53:3d5a3d241a5e | 769 | /// |
| whismanoid | 53:3d5a3d241a5e | 770 | /// For 16-bit register size: |
| whismanoid | 53:3d5a3d241a5e | 771 | /// |
| whismanoid | 53:3d5a3d241a5e | 772 | /// SPI 24-bit or 32-bit transfer |
| whismanoid | 53:3d5a3d241a5e | 773 | /// |
| whismanoid | 53:3d5a3d241a5e | 774 | /// SPI MOSI = 0aaa_aaaa_dddd_dddd_dddd_dddd |
| whismanoid | 53:3d5a3d241a5e | 775 | /// |
| whismanoid | 53:3d5a3d241a5e | 776 | /// SPI MISO = xxxx_xxxx_xxxx_xxxx_xxxx_xxxx |
| whismanoid | 53:3d5a3d241a5e | 777 | /// |
| whismanoid | 53:3d5a3d241a5e | 778 | /// For 24-bit register size: |
| whismanoid | 53:3d5a3d241a5e | 779 | /// |
| whismanoid | 53:3d5a3d241a5e | 780 | /// SPI 32-bit transfer |
| whismanoid | 53:3d5a3d241a5e | 781 | /// |
| whismanoid | 53:3d5a3d241a5e | 782 | /// SPI MOSI = 0aaa_aaaa_dddd_dddd_dddd_dddd_dddd_dddd |
| whismanoid | 53:3d5a3d241a5e | 783 | /// |
| whismanoid | 53:3d5a3d241a5e | 784 | /// SPI MISO = xxxx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx_xxxx |
| whismanoid | 53:3d5a3d241a5e | 785 | /// |
| whismanoid | 53:3d5a3d241a5e | 786 | /// @return 1 on success; 0 on failure |
| whismanoid | 53:3d5a3d241a5e | 787 | uint8_t RegWrite(MAX11043_CMD_enum_t commandByte, uint32_t regData); |
| whismanoid | 53:3d5a3d241a5e | 788 | |
| whismanoid | 53:3d5a3d241a5e | 789 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 53:3d5a3d241a5e | 790 | // CODE GENERATOR: looks like this is a 'read' register access function |
| whismanoid | 53:3d5a3d241a5e | 791 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 792 | /// Read an 8-bit MAX11043 register |
| whismanoid | 53:3d5a3d241a5e | 793 | /// |
| whismanoid | 57:1c9da8e90737 | 794 | /// CMDOP_1aaa_aaaa_ReadRegister bit is set 1 indicating a read operation. |
| whismanoid | 53:3d5a3d241a5e | 795 | /// |
| whismanoid | 53:3d5a3d241a5e | 796 | /// MAX11043 register length can be determined by function RegSize. |
| whismanoid | 53:3d5a3d241a5e | 797 | /// |
| whismanoid | 53:3d5a3d241a5e | 798 | /// For 8-bit register size: |
| whismanoid | 53:3d5a3d241a5e | 799 | /// |
| whismanoid | 53:3d5a3d241a5e | 800 | /// SPI 16-bit transfer |
| whismanoid | 53:3d5a3d241a5e | 801 | /// |
| whismanoid | 53:3d5a3d241a5e | 802 | /// SPI MOSI = 1aaa_aaaa_0000_0000 |
| whismanoid | 53:3d5a3d241a5e | 803 | /// |
| whismanoid | 53:3d5a3d241a5e | 804 | /// SPI MISO = xxxx_xxxx_dddd_dddd |
| whismanoid | 53:3d5a3d241a5e | 805 | /// |
| whismanoid | 53:3d5a3d241a5e | 806 | /// For 16-bit register size: |
| whismanoid | 53:3d5a3d241a5e | 807 | /// |
| whismanoid | 53:3d5a3d241a5e | 808 | /// SPI 24-bit or 32-bit transfer |
| whismanoid | 53:3d5a3d241a5e | 809 | /// |
| whismanoid | 53:3d5a3d241a5e | 810 | /// SPI MOSI = 1aaa_aaaa_0000_0000_0000_0000 |
| whismanoid | 53:3d5a3d241a5e | 811 | /// |
| whismanoid | 53:3d5a3d241a5e | 812 | /// SPI MISO = xxxx_xxxx_dddd_dddd_dddd_dddd |
| whismanoid | 53:3d5a3d241a5e | 813 | /// |
| whismanoid | 53:3d5a3d241a5e | 814 | /// For 24-bit register size: |
| whismanoid | 53:3d5a3d241a5e | 815 | /// |
| whismanoid | 53:3d5a3d241a5e | 816 | /// SPI 32-bit transfer |
| whismanoid | 53:3d5a3d241a5e | 817 | /// |
| whismanoid | 53:3d5a3d241a5e | 818 | /// SPI MOSI = 1aaa_aaaa_0000_0000_0000_0000_0000_0000 |
| whismanoid | 53:3d5a3d241a5e | 819 | /// |
| whismanoid | 53:3d5a3d241a5e | 820 | /// SPI MISO = xxxx_xxxx_dddd_dddd_dddd_dddd_dddd_dddd |
| whismanoid | 53:3d5a3d241a5e | 821 | /// |
| whismanoid | 53:3d5a3d241a5e | 822 | /// |
| whismanoid | 53:3d5a3d241a5e | 823 | /// @return 1 on success; 0 on failure |
| whismanoid | 53:3d5a3d241a5e | 824 | uint8_t RegRead(MAX11043_CMD_enum_t commandByte, uint32_t* ptrRegData); |
| whismanoid | 53:3d5a3d241a5e | 825 | |
| whismanoid | 53:3d5a3d241a5e | 826 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 53:3d5a3d241a5e | 827 | // CODE GENERATOR: looks like this is a 'size' register access function |
| whismanoid | 53:3d5a3d241a5e | 828 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 829 | /// Return the size of a MAX11043 register |
| whismanoid | 53:3d5a3d241a5e | 830 | /// |
| whismanoid | 53:3d5a3d241a5e | 831 | /// @return 8 for 8-bit, 16 for 16-bit, 24 for 24-bit, else 0 for undefined register size |
| whismanoid | 53:3d5a3d241a5e | 832 | uint8_t RegSize(MAX11043_CMD_enum_t commandByte); |
| whismanoid | 53:3d5a3d241a5e | 833 | |
| whismanoid | 53:3d5a3d241a5e | 834 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 53:3d5a3d241a5e | 835 | //---------------------------------------- |
| whismanoid | 57:1c9da8e90737 | 836 | /// Decode operation from commandByte |
| whismanoid | 57:1c9da8e90737 | 837 | /// |
| whismanoid | 57:1c9da8e90737 | 838 | /// @return operation such as idle, read register, write register, etc. |
| whismanoid | 57:1c9da8e90737 | 839 | MAX11043::MAX11043_CMDOP_enum_t DecodeCommand(MAX11043_CMD_enum_t commandByte); |
| whismanoid | 57:1c9da8e90737 | 840 | |
| whismanoid | 57:1c9da8e90737 | 841 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 57:1c9da8e90737 | 842 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 843 | /// Return the address field of a MAX11043 register |
| whismanoid | 53:3d5a3d241a5e | 844 | /// |
| whismanoid | 53:3d5a3d241a5e | 845 | /// @return register address field as given in datasheet |
| whismanoid | 53:3d5a3d241a5e | 846 | uint8_t RegAddrOfCommand(MAX11043_CMD_enum_t commandByte); |
| whismanoid | 53:3d5a3d241a5e | 847 | |
| whismanoid | 53:3d5a3d241a5e | 848 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 53:3d5a3d241a5e | 849 | // CODE GENERATOR: looks like this is a 'read' register access function |
| whismanoid | 53:3d5a3d241a5e | 850 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 851 | /// Test whether a command byte is a register read command |
| whismanoid | 53:3d5a3d241a5e | 852 | /// |
| whismanoid | 53:3d5a3d241a5e | 853 | /// @return true if command byte is a register read command |
| whismanoid | 53:3d5a3d241a5e | 854 | uint8_t IsRegReadCommand(MAX11043_CMD_enum_t commandByte); |
| whismanoid | 53:3d5a3d241a5e | 855 | |
| whismanoid | 53:3d5a3d241a5e | 856 | // CODE GENERATOR: looks like this is a register access function because 'regAdd' |
| whismanoid | 53:3d5a3d241a5e | 857 | // CODE GENERATOR: looks like this is a 'name' register access function |
| whismanoid | 53:3d5a3d241a5e | 858 | //---------------------------------------- |
| whismanoid | 53:3d5a3d241a5e | 859 | /// Return the name of a MAX11043 register |
| whismanoid | 53:3d5a3d241a5e | 860 | /// |
| whismanoid | 53:3d5a3d241a5e | 861 | /// @return null-terminated constant C string containing register name or empty string |
| whismanoid | 53:3d5a3d241a5e | 862 | const char* RegName(MAX11043_CMD_enum_t commandByte); |
| whismanoid | 53:3d5a3d241a5e | 863 | |
| whismanoid | 59:47538bcf6cda | 864 | //---------------------------------------- |
| whismanoid | 64:a667cfd83492 | 865 | /// Menu item '$' -> adca, adcb, adcc, adcd |
| whismanoid | 64:a667cfd83492 | 866 | /// Read ADCabcd |
| whismanoid | 64:a667cfd83492 | 867 | /// |
| whismanoid | 64:a667cfd83492 | 868 | /// @return 1 on success; 0 on failure |
| whismanoid | 64:a667cfd83492 | 869 | uint8_t Read_ADCabcd(void); |
| whismanoid | 64:a667cfd83492 | 870 | |
| whismanoid | 64:a667cfd83492 | 871 | //---------------------------------------- |
| whismanoid | 66:3fe92f6f1cfa | 872 | /// Menu item 'GA' |
| whismanoid | 64:a667cfd83492 | 873 | /// Write AGain register |
| whismanoid | 64:a667cfd83492 | 874 | /// |
| whismanoid | 64:a667cfd83492 | 875 | /// @param[in] gain 2's complement, 0x800=0.25V/V, 0x1000=0.5V/V, 0x2000=1VV/V, 0x4000=2V/V, default=0x2000 |
| whismanoid | 64:a667cfd83492 | 876 | /// |
| whismanoid | 64:a667cfd83492 | 877 | /// @return 1 on success; 0 on failure |
| whismanoid | 64:a667cfd83492 | 878 | uint8_t Write_AGain(uint32_t gain); |
| whismanoid | 64:a667cfd83492 | 879 | |
| whismanoid | 64:a667cfd83492 | 880 | //---------------------------------------- |
| whismanoid | 59:47538bcf6cda | 881 | /// Menu item 'XX' |
| whismanoid | 59:47538bcf6cda | 882 | /// |
| whismanoid | 59:47538bcf6cda | 883 | /// @return 1 on success; 0 on failure |
| whismanoid | 59:47538bcf6cda | 884 | uint8_t Configure_XXXXX(uint8_t linef, uint8_t rate); |
| whismanoid | 59:47538bcf6cda | 885 | |
| whismanoid | 59:47538bcf6cda | 886 | //---------------------------------------- |
| whismanoid | 59:47538bcf6cda | 887 | /// Menu item 'XY' |
| whismanoid | 59:47538bcf6cda | 888 | /// |
| whismanoid | 59:47538bcf6cda | 889 | /// @return 1 on success; 0 on failure |
| whismanoid | 59:47538bcf6cda | 890 | uint8_t Configure_XXXXY(uint8_t linef, uint8_t rate); |
| whismanoid | 59:47538bcf6cda | 891 | |
| whismanoid | 53:3d5a3d241a5e | 892 | }; // end of class MAX11043 |
| whismanoid | 53:3d5a3d241a5e | 893 | |
| whismanoid | 53:3d5a3d241a5e | 894 | #endif // __MAX11043_H__ |
| whismanoid | 53:3d5a3d241a5e | 895 | |
| whismanoid | 53:3d5a3d241a5e | 896 | // End of file |