Supachai Vorapojpisut
Example code for modbus serial
Revision 1:0007712e84a8, committed 2018-03-16
- Comitter:
- vsupacha
- Date:
- Fri Mar 16 04:34:08 2018 +0000
- Parent:
- 0:f306cb0263a6
- Commit message:
- Draft of complete solution
Changed in this revision
diff -r f306cb0263a6 -r 0007712e84a8 main.cpp
--- a/main.cpp Wed Mar 14 06:17:48 2018 +0000
+++ b/main.cpp Fri Mar 16 04:34:08 2018 +0000
@@ -1,29 +1,84 @@
#include "mbed.h"
#include "modbus.h"
+#include "RawSerial.h"
DigitalOut myled(LED1);
RawSerial pc(USBTX, USBRX);
+InterruptIn button(USER_BUTTON);
+Ticker timebase;
+
+uint32_t Tick = 0;
+uint32_t pressedTick = 0;
+uint32_t releasedTick = 0;
void serial_callback()
{
uint8_t frame[6];
+ uint16_t offset, count;
+ uint8_t reg_map;
char ch = pc.getc();
if (modbus_parser(ch, frame)) {
-
+ offset = (frame[2] << 8) | (frame[3]);
+ count = (frame[4] << 8) | (frame[5]);
+ reg_map = modbus_check(offset, count);
+ modbus_response(reg_map);
+ }
+}
+
+void pressed_callback()
+{
+ uint16_t skipCount;
+
+ if ((Tick > pressedTick) && (Tick > releasedTick)) {
+ skipCount = Tick - releasedTick;
+ modbus_update(0x0000, skipCount);
+ pressedTick = Tick;
+ // printf("Pressed: %d - %d - %d\r\n", pressedTick, releasedTick, skipCount);
}
}
+void released_callback()
+{
+ uint16_t widthCount;
+
+ if ((Tick > pressedTick) && (Tick > releasedTick)) {
+ widthCount = Tick - pressedTick;
+ modbus_update(0x0001, widthCount);
+ releasedTick = Tick;
+ // printf("Released: %d - %d - %d\r\n", pressedTick, releasedTick, widthCount);
+ }
+}
+
+void ticker_callback()
+{
+ Tick++;
+}
+
int main() {
// setup code
- pc.attach(serial_callback);
+ pc.attach(&serial_callback);
+
// 1. button code
+ button.rise(&pressed_callback);
+ button.fall(&released_callback);
+
// 2. timer code
+ timebase.attach(&ticker_callback, 0.1);
+ printf("Starting\n");
+ printf("Test: %02X\r\n", modbus_check(0x0000, 0x0001));
+ printf("Test: %02X\r\n", modbus_check(0x0001, 0x0001));
+ printf("Test: %02X\r\n", modbus_check(0x0000, 0x0002));
+ printf("Test: %02X\r\n", modbus_check(0x0000, 0x0003));
+ printf("Test: %02X\r\n", modbus_check(0x0001, 0x0002));
+ printf("Test: %02X\r\n", modbus_check(0x0002, 0x0002));
while(1) {
- // loop code
- myled = 1; // LED is ON
- wait(0.2); // 200 ms
- myled = 0; // LED is OFF
- wait(1.0); // 1 sec
+ // blinking LED
+ myled = !myled;
+ wait(2.5);
+ printf("Detection: %d - %d\r\n", pressedTick, releasedTick);
+ modbus_response(0x01);
+ modbus_response(0x02);
+ modbus_response(0x03);
}
}
diff -r f306cb0263a6 -r 0007712e84a8 modbus.cpp
--- a/modbus.cpp Wed Mar 14 06:17:48 2018 +0000
+++ b/modbus.cpp Fri Mar 16 04:34:08 2018 +0000
@@ -24,7 +24,8 @@
for (i = 0; i < 6; i++) {
sum += frame[i];
}
- if ((sum + lrc) == 0) {
+ sum = sum + lrc;
+ if (sum == 0) {
status = 1;
}
}
@@ -34,15 +35,20 @@
void modbus_init(uint8_t id)
{
+ int i;
+
nodeId = id;
+ for (i = 0; i < ADDR_RANGE; i++) {
+ regValue[i] = 0;
+ }
}
uint16_t modbus_read(uint16_t offset)
-{
+{
if (offset < ADDR_RANGE) {
return regValue[offset];
}
- return 0xFFFF;
+ return 0;
}
uint16_t modbus_update(uint8_t offset, uint16_t val)
@@ -54,7 +60,23 @@
regValue[offset] = val;
return tmp;
}
- return 0xFFFF;
+ return 0;
+}
+
+uint8_t modbus_check(uint16_t offset, uint16_t count)
+{
+ uint8_t reg_map = 0x00;
+ int i, j;
+
+ for (i = 0; i < ADDR_RANGE; i++) {
+ for (j = offset; j < (offset+count); j++) {
+ if (j == (ADDR_BASE + i)) {
+ reg_map |= (1 << i);
+ }
+ }
+ }
+
+ return reg_map;
}
int modbus_parser(char ch, uint8_t *frame)
@@ -72,6 +94,7 @@
}
break;
case RECEPTION:
+ printf("%c", ch);
if ((ch >= '0') && (ch <= '9')) {
buf[idx++] = ch;
} else if ((ch >= 'a') && (ch <= 'f')) {
@@ -101,3 +124,66 @@
return status;
}
+
+uint8_t calc_lrc(uint8_t *frame, int count)
+{
+ int8_t lrc = 0;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ lrc += frame[i];
+ }
+ return -lrc;
+}
+
+void modbus_response(uint8_t reg_map)
+{
+ char fmt00[] = ":%02X%02X%02X\r\n";
+ char fmt01[] = ":%02X%02X%02X%02X%02X\r\n";
+ char fmt02[] = ":%02X%02X%02X%02X%02X\r\n";
+ char fmt03[] = ":%02X%02X%02X%02X%02X%02X%02X\r\n";
+ char *fmtstr;
+ char str[20];
+ uint8_t frame[ADDR_RANGE*2 + 3];
+ uint16_t tmp;
+
+ frame[0] = nodeId;
+ frame[1] = FUNC_CODE;
+ switch(reg_map) {
+ case 1:
+ tmp = modbus_read(0);
+ frame[2] = tmp >> 8;
+ frame[3] = tmp & 0xFF;
+ frame[4] = calc_lrc(frame, 4);
+ fmtstr = fmt01;
+ sprintf(str, fmtstr, frame[0], frame[1], frame[2], frame[3], frame[4]);
+ printf("Response: %s", str);
+ break;
+ case 2:
+ tmp = modbus_read(1);
+ frame[2] = tmp >> 8;
+ frame[3] = tmp & 0xFF;
+ frame[4] = calc_lrc(frame, 4);
+ fmtstr = fmt02;
+ sprintf(str, fmtstr, frame[0], frame[1], frame[2], frame[3], frame[4]);
+ printf("Response: %s", str);
+ break;
+ case 3:
+ tmp = modbus_read(0);
+ frame[2] = tmp >> 8;
+ frame[3] = tmp & 0xFF;
+ tmp = modbus_read(1);
+ frame[4] = tmp >> 8;
+ frame[5] = tmp & 0xFF;
+ frame[6] = calc_lrc(frame, 6);
+ fmtstr = fmt03;
+ sprintf(str, fmtstr, frame[0], frame[1], frame[2], frame[3], frame[4], frame[5], frame[6]);
+ printf("Response: %s", str);
+ break;
+ default:
+ fmtstr = fmt00;
+ frame[2] = calc_lrc(frame, 2);
+ sprintf(str, fmtstr, frame[0], frame[1], frame[2]);
+ printf("Response: %s", str);
+ }
+}
diff -r f306cb0263a6 -r 0007712e84a8 modbus.h --- a/modbus.h Wed Mar 14 06:17:48 2018 +0000 +++ b/modbus.h Fri Mar 16 04:34:08 2018 +0000 @@ -10,5 +10,7 @@ uint16_t modbus_read(uint16_t offset); uint16_t modbus_update(uint8_t offset, uint16_t val); int modbus_parser(char ch, uint8_t *frame); +uint8_t modbus_check(uint16_t offset, uint16_t count); +void modbus_response(uint8_t reg_map); #endif // MODBUS_H