Diff: cpp/Serial.h

Revision:

2:143cac498751

Parent:

0:fd0d7bdfcdc2

diff -r 62685faffa05 -r 143cac498751 cpp/Serial.h
--- a/cpp/Serial.h	Thu Nov 29 15:41:14 2012 +0000
+++ b/cpp/Serial.h	Mon Feb 18 11:44:18 2013 +0000
@@ -1,23 +1,17 @@
 /* mbed Microcontroller Library
- * Copyright (c) 2006-2012 ARM Limited
+ * Copyright (c) 2006-2013 ARM Limited
  *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
  *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
+ *     http://www.apache.org/licenses/LICENSE-2.0
  *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
  */
 #ifndef MBED_SERIAL_H
 #define MBED_SERIAL_H
@@ -34,7 +28,7 @@
 
 /** A serial port (UART) for communication with other serial devices
  *
- * Can be used for Full Duplex communication, or Simplex by specifying 
+ * Can be used for Full Duplex communication, or Simplex by specifying
  * one pin as NC (Not Connected)
  *
  * Example:
@@ -53,27 +47,34 @@
 class Serial : public Stream {
 
 public:
-
     /** Create a Serial port, connected to the specified transmit and receive pins
      *
-     *  @param tx Transmit pin 
+     *  @param tx Transmit pin
      *  @param rx Receive pin
      *
      *  @note
      *    Either tx or rx may be specified as NC if unused
      */
-    Serial(PinName tx, PinName rx) {
-        serial_init(&_serial, tx, rx);
-        serial_irq_handler(&_serial, Serial::_irq_handler, (uint32_t)this);
-    }
+    Serial(PinName tx, PinName rx, const char *name=NULL);
 
     /** Set the baud rate of the serial port
-     *  
+     *
      *  @param baudrate The baudrate of the serial port (default = 9600).
      */
-    void baud(int baudrate) {
-        serial_baud(&_serial, baudrate);
-    }
+    void baud(int baudrate);
+
+    enum Parity {
+        None = 0,
+        Odd,
+        Even,
+        Forced1,
+        Forced0
+    };
+
+    enum IrqType {
+        RxIrq = 0,
+        TxIrq
+    };
 
     /** Set the transmission format used by the Serial port
      *
@@ -81,9 +82,7 @@
      *  @param parity The parity used (Serial::None, Serial::Odd, Serial::Even, Serial::Forced1, Serial::Forced0; default = Serial::None)
      *  @param stop The number of stop bits (1 or 2; default = 1)
      */
-    void format(int bits = 8, SerialParity parity=ParityNone, int stop_bits=1) {
-        serial_format(&_serial, bits, parity, stop_bits);
-    }
+    void format(int bits = 8, Parity parity=Serial::None, int stop_bits=1);
 
     /** Determine if there is a character available to read
      *
@@ -91,64 +90,44 @@
      *    1 if there is a character available to read,
      *    0 otherwise
      */
-    int readable() {
-        return serial_readable(&_serial);
-    }
+    int readable();
 
     /** Determine if there is space available to write a character
-     * 
+     *
      *  @returns
      *    1 if there is space to write a character,
      *    0 otherwise
      */
-    int writeable() {
-        return serial_writable(&_serial);
-    }
+    int writeable();
 
     /** Attach a function to call whenever a serial interrupt is generated
      *
      *  @param fptr A pointer to a void function, or 0 to set as none
      *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
      */
-    void attach(void (*fptr)(void), SerialIrq type=RxIrq) {
-        if (fptr) {
-            _irq[type].attach(fptr);
-            serial_irq_set(&_serial, type, 1);
-        } else {
-            serial_irq_set(&_serial, type, 0);
-        }
-    }
+    void attach(void (*fptr)(void), IrqType type=RxIrq);
 
     /** Attach a member function to call whenever a serial interrupt is generated
-     *     
+     *
      *  @param tptr pointer to the object to call the member function on
      *  @param mptr pointer to the member function to be called
      *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
      */
     template<typename T>
-    void attach(T* tptr, void (T::*mptr)(void), SerialIrq type=RxIrq) {
+    void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
         if((mptr != NULL) && (tptr != NULL)) {
             _irq[type].attach(tptr, mptr);
-            serial_irq_set(&_serial, type, 1);
+            serial_irq_set(&_serial, (SerialIrq)type, 1);
         }
     }
-    
-    static void _irq_handler(uint32_t id, SerialIrq irq_type) {
-        Serial *handler = (Serial*)id;
-        handler->_irq[irq_type].call();
-    }
 
+    static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
 protected:
-    virtual int _getc() {
-        return serial_getc(&_serial);
-    }
-    
-    virtual int _putc(int c) {
-        serial_putc(&_serial, c);
-        return c;
-    }
-    
-    serial_t   _serial;
+    virtual int _getc();
+    virtual int _putc(int c);
+
+    serial_t        _serial;
     FunctionPointer _irq[2];
 };