Vergil Cola
Added mutex for multiple SPI devices on the same SPI bus
Fork of
cc3000_hostdriver_mbedsocket
by 
Martin Kojtal
cc3000.h
- Committer:
- Kojto
- Date:
- 2013-10-13
- Revision:
- 44:960b73df5981
- Parent:
- 43:864437b6c058
- Child:
- 45:50ab13d8f2dc
File content as of revision 44:960b73df5981:
/*****************************************************************************
*
* C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
* Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
* provided help.
*
* This version of "host driver" uses CC3000 Host Driver Implementation. Thus
* read the following copyright:
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef CC3000_H
#define CC3000_H
#include "mbed.h"
#include "cc3000_common.h"
#include "cc3000_spi.h"
#include "cc3000_simplelink.h"
#include "cc3000_netapp.h"
#include "cc3000_nvmem.h"
#include "cc3000_socket.h"
#define MAX_SOCKETS 4
// cc3000 Ethernet Interface - enabled by default
#define CC3000_ETH_COMPAT 1
/** Enable debug messages - set 1 */
// Debug - Socket interface messages
#define CC3000_DEBUG_SOCKET 0
// Debug - HCI TX messages
#define CC3000_DEBUG_HCI_TX 0
// Debug - HCI Rx messages
#define CC3000_DEBUG_HCI_RX 0
// Debug - General Debug
#define CC3000_DEBUG 0
// Add colour to the debug messages, requires a VT100 terminal like putty, comment out to remove
#define VT100_COLOUR 0
#if (CC3000_DEBUG_SOCKET == 1)
#if (VT100_COLOUR == 1)
#define DBG_SOCKET(x, ...) std::printf("\x1b[2;32;40m[CC3000 : SOCKET] "x"\x1b[0;37;40m\r\n", ##__VA_ARGS__);
#else
#define DBG_SOCKET(x, ...) std::printf("[CC3000 : SOCKET] "x"\r\n", ##__VA_ARGS__);
#endif
#else
#define DBG_SOCKET(x, ...)
#endif
#if (CC3000_DEBUG_HCI_TX == 1)
#if (VT100_COLOUR == 1)
#define DBG_HCI(x, ...) std::printf("\x1b[2;35;40m[CC3000 : HCI RX] "x"\x1b[0;37;40m\r\n", ##__VA_ARGS__);
#else
#define DBG_HCI(x, ...) std::printf("[CC3000 : HCI RX] "x"\r\n", ##__VA_ARGS__);
#endif
#else
#define DBG_HCI(x, ...)
#endif
#if (CC3000_DEBUG_HCI_RX == 1)
#if (VT100_COLOUR == 1)
#define DBG_HCI_CMD(x, ...) std::printf("\x1b[2;36;40m[CC3000 : HCI TX] "x"\x1b[0;37;40m\r\n", ##__VA_ARGS__);
#else
#define DBG_HCI_CMD(x, ...) std::printf("[CC3000 : HCI TX] "x"\r\n", ##__VA_ARGS__);
#endif
#else
#define DBG_HCI_CMD(x, ...)
#endif
#if (CC3000_DEBUG == 1)
#if (VT100_COLOUR == 1)
#define DBG_CC(x, ...) std::printf("\x1b[2;32;40m[CC3000] "x"\x1b[0;37;40m\r\n", ##__VA_ARGS__);
#else
#define DBG_CC(x, ...) std::printf("[CC3000] "x"\r\n", ##__VA_ARGS__);
#endif
#else
#define DBG_CC(x, ...)
#endif
namespace mbed_cc3000 {
/** User info structure
*/
typedef struct {
uint8_t FTC; // First time config performed
uint8_t PP_version[2]; // Patch Programmer version
uint8_t SERV_PACK[2]; // Service Pack Version
uint8_t DRV_VER[3]; // Driver Version
uint8_t FW_VER[3]; // Firmware Version
uint8_t validCIK; // CIK[] is valid (Client Interface Key)
uint8_t CIK[40];
} tUserFS;
/** Function pointers which are not yet implemented
*/
enum FunctionNumber {
FW_PATCHES = 0,
DRIVER_PATCHES = 1,
BOOTLOADER_PATCHES = 2,
};
/** CC3000 Simple Link class which contains status of cc3000.
*/
class cc3000_simple_link {
public:
/**
* \brief ctor - sets magic number in the buffers (overflow mark).
* \param none
* \return none
*/
cc3000_simple_link();
/**
* \brief dtor
* \param none
* \return none
*/
~cc3000_simple_link();
/**
* \brief Returns data received flag.
* \return Data received flag.
*/
uint8_t get_data_received_flag();
/**
* \brief Set data received flag.
* \param value The value to be set.
*/
void set_data_received_flag(uint8_t value);
/** Returns if tx was completed.
* \return
* true if tx was completed,
* false otherwise.
*/
bool get_tx_complete_signal();
/**
* \brief Sets flag that tx was completed.
* \param value Value to be set
* \return none
*/
void set_tx_complete_signal(bool value);
/**
* \brief Get receive buffer.
* \param none
* \return Pointer to the receive buffer.
*/
uint8_t *get_received_buffer();
/**
* \brief Get transmit buffer.
* \param none
* \return Pointer to the transmit buffer.
*/
uint8_t *get_transmit_buffer();
/**
* \brief Get number of free buffers.
* \param none
* \return
* Number of free buffers.
*/
uint16_t get_number_free_buffers();
/**
* \brief Set number of free buffers.
* \param value Number of free buffers.
* \return none
*/
void set_number_free_buffers(uint16_t value);
/**
* \brief Retrieve buffer length.
* \param none
* \return Buffer length
*/
uint16_t get_buffer_length();
/**
* \brief Set buffer length
* \param value The length
* \return none
*/
void set_buffer_length(uint16_t value);
/**
* \brief Retrieve pending data flag.
* \param none
* \return Pending data flag
*/
uint16_t get_pending_data();
/**
* \brief Set pending data flag.
* \param value Pending data value.
* \return none
*/
void set_pending_data(uint16_t value);
/**
* \brief Retreive op code.
* \param none
* \return Op code
*/
uint16_t get_op_code();
/**
* \brief Set op code.
* \param code op code.
* \return none
*/
void set_op_code(uint16_t code);
/**
* \brief Get number of released packets.
* \param none
* \return Number of released packets.
*/
uint16_t get_released_packets();
/**
* \brief Set number of released packets.
* \param value Number of released packets.
* \return none
*/
void set_number_of_released_packets(uint16_t value);
/**
* \brief Get number of sent packats
* \param none
* \return Number of sent packets.
*/
uint16_t get_sent_packets();
/**
* \brief Set number of sent packets
* \param value Number of sent packets.
* \return none
*/
void set_sent_packets(uint16_t value);
/**
* \brief Retrieve transmit error
* \param none
* \return Transmit error
*/
int32_t get_transmit_error();
/**
* \brief Set transmit error.
* \param value Error to be set.
* \return none
*/
void set_transmit_error(int32_t value);
/**
* \brief Get buffer size.
* \param none
* \return Size of buffer.
*/
uint16_t get_buffer_size();
/**
* \brief Set buffer size.
* \param value Buffer size.
* \return none
*/
void set_buffer_size(uint16_t value);
/**
* \brief Not used currently.
* \param function Number of desired function.
* \return void pointer to the function (need to recast).
*/
void *get_func_pointer(FunctionNumber function);
/**
* \brief Retreive pointer to the received data.
* \param none
* \return Pointer to the received data buffer.
*/
uint8_t *get_received_data();
/**
* \brief Set received data pointer.
* \param pointer Pointer to the buffer.
* \return none
*/
void set_received_data(uint8_t *pointer);
private:
uint8_t _data_received_flag;
bool _tx_complete_signal;
uint16_t _rx_event_opcode;
uint16_t _free_buffers;
uint16_t _buffer_length;
uint16_t _buffer_size;
uint16_t _rx_data_pending;
uint16_t _sent_packets;
uint16_t _released_packets;
int32_t _transmit_data_error;
uint8_t *_received_data;
uint8_t _rx_buffer[CC3000_RX_BUFFER_SIZE];
uint8_t _tx_buffer[CC3000_TX_BUFFER_SIZE];
private:
/* Not used currently */
int8_t *(* _fFWPatches)(uint32_t *length);
int8_t *(* _fDriverPatches)(uint32_t *length);
int8_t *(* _fBootLoaderPatches)(uint32_t *length);
};
/** Forward declaration classes
*/
class cc3000_hci;
class cc3000_nvmem;
class cc3000_spi;
class cc3000;
/** Event layer
*/
class cc3000_event {
public:
/**
* \brief
* \param simplelink Reference to simple link object.
* \param hci Reference to hci object.
* \param spi Reference to spi object.
* \param cc3000 Reference to cc3000 object.
* \return none
*/
cc3000_event(cc3000_simple_link &simplelink, cc3000_hci &hci, cc3000_spi &spi, cc3000 &cc3000);
/**
* \brief Ctor
* \param none
* \return none
*/
~cc3000_event();
/**
* \brief Handle unsolicited event from type patch request.
* \param event_hdr event header
* \return none
*/
void hci_unsol_handle_patch_request(uint8_t *event_hdr);
/**
* \brief Parse the incoming event packets and issue corresponding event handler from global array of handlers pointers.
* \param ret_param incoming data buffer
* \param from from information (in case of data received)
* \param fromlen from information length (in case of data received)
* \return none
*/
uint8_t *hci_event_handler(void *ret_param, uint8_t *from, uint8_t *fromlen);
/**
* \brief Handle unsolicited events.
* \param event_hdr Event header
* \return 1 if event supported and handled
* \return 0 if event is not supported
*/
int32_t hci_unsol_event_handler(uint8_t *event_hdr);
/**
* \brief Parse the incoming unsolicited event packets and start corresponding event handler.
* \param None
* \return ESUCCESS if successful, EFAIL if an error occurred.
*/
int32_t hci_unsolicited_event_handler(void);
/**
* \brief Get the socket status.
* \param Sd Socket IS
* \return Current status of the socket.
*/
int32_t get_socket_active_status(int32_t sd);
/**
* \brief Check if the socket ID and status are valid and set the global socket status accordingly.
* \param Sd Sock descr
* \param Status status to be set
* \return none
*/
void set_socket_active_status(int32_t sd, int32_t status);
/**
* \brief Keep track on the number of packets transmitted and update the number of free buffer in the SL device.
* \brief Called when unsolicited event = HCI_EVNT_DATA_UNSOL_FREE_BUFF has received.
* \param event pointer to the string contains parameters for IPERF.
* \return ESUCCESS if successful, EFAIL if an error occurred.
*/
int32_t hci_event_unsol_flowcontrol_handler(uint8_t *event);
/**
* \brief Update the socket status.
* \param resp_params Socket IS
* \return Current status of the socket.
*/
void update_socket_active_status(uint8_t *resp_params);
/**
* \brief Wait for event, pass it to the hci_event_handler and update the event opcode in a global variable.
* \param op_code Command operation code
* \param ret_param Command return parameters
* \return none
*/
void simplelink_wait_event(uint16_t op_code, void *ret_param);
/**
* \brief Wait for data, pass it to the hci_event_handler and set the data available flag.
* \param buffer Data buffer
* \param from From information
* \param fromlen From information length
* \return none
*/
void simplelink_wait_data(uint8_t *buffer, uint8_t *from, uint8_t *fromlen);
/**
* \brief Trigger Received event/data processing - called from the SPI library to receive the data
* \param buffer pointer to the received data buffer\n
* The function triggers Received event/data processing\n
* \return none
*/
void received_handler(uint8_t *buffer);
private:
uint32_t socket_active_status;
cc3000_simple_link &_simple_link;
cc3000_hci &_hci;
cc3000_spi &_spi;
cc3000 &_cc3000;
};
/** Netapp layer
*/
class cc3000_netapp {
public:
/**
* \brief Ctor
* \param simple_link Reference to the simple link object.
* \param nvmem Reference to the nvmem object.
* \param hci Reference to the hci object.
* \param event Reference to the event object.
* \return none
*/
cc3000_netapp(cc3000_simple_link &simple_link, cc3000_nvmem &nvmem, cc3000_hci &hci, cc3000_event &event);
/**
* \brief Dtor
* \param none
* \return none
*/
~cc3000_netapp();
/**
* \brief Configure device MAC address and store it in NVMEM.
* The value of the MAC address configured through the API will be\n
* stored in CC3000 non volatile memory, thus preserved over resets.\n
* \param mac device mac address, 6 bytes. Saved: yes
* \return return on success 0, otherwise error.
*/
int32_t config_mac_adrress(uint8_t *mac);
/**
* \brief Configure the network interface, static or dynamic (DHCP).
* In order to activate DHCP mode, ip, subnet_mask, default_gateway must be 0.\n
* The default mode of CC3000 is DHCP mode. The configuration is saved in non volatile memory\n
* and thus preserved over resets.\n
* \param ip device mac address, 6 bytes. Saved: yes
* \param subnet_mask device mac address, 6 bytes. Saved: yes
* \param default_gateway device mac address, 6 bytes. Saved: yes
* \param dns_server device mac address, 6 bytes. Saved: yes
* \return 0 on success, otherwise error.
* \note If the mode is altered, a reset of CC3000 device is required to apply the changes.\n
* Also note that an asynchronous event of type 'DHCP_EVENT' is generated only when\n
* a connection to the AP was established. This event is generated when an IP address\n
* is allocated either by the DHCP server or by static allocation.\n
*/
int32_t dhcp(uint32_t *ip, uint32_t *subnet_mask,uint32_t *default_gateway, uint32_t *dns_server);
#ifndef CC3000_TINY_DRIVER
/**
* \brief Get the CC3000 Network interface information.
* This information is only available after establishing a WLAN connection.\n
* Undefined values are returned when this function is called before association.\n
* \param ipconfig pointer to a tNetappIpconfigRetArgs structure for storing the network interface configuration.\n
* tNetappIpconfigRetArgs: aucIP - ip address,\n
* aucSubnetMask - mask
* aucDefaultGateway - default gateway address\n
* aucDHCPServer - dhcp server address\n
* aucDNSServer - dns server address\n
* uaMacAddr - mac address\n
* uaSSID - connected AP ssid\n
* \return none
* \note This function is useful for figuring out the IP Configuration of\n
* the device when DHCP is used and for figuring out the SSID of\n
* the Wireless network the device is associated with.\n
*/
void ipconfig(tNetappIpconfigRetArgs *ipconfig);
/**
* \brief Set new timeout values for DHCP lease timeout, ARP refresh timeout, keepalive event timeout and socket inactivity timeout
* \param dhcp DHCP lease time request, also impact\n
* the DHCP renew timeout.\n
* Range: [0-0xffffffff] seconds,\n
* 0 or 0xffffffff = infinite lease timeout.\n
* Resolution: 10 seconds.\n
* Influence: only after reconnecting to the AP. \n
* Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds.\n
* The parameter is saved into the CC3000 NVMEM.\n
* The default value on CC3000 is 14400 seconds.\n
*
* \param arp ARP refresh timeout, if ARP entry is not updated by\n
* incoming packet, the ARP entry will be deleted by\n
* the end of the timeout. \n
* Range: [0-0xffffffff] seconds, 0 = infinite ARP timeout\n
* Resolution: 10 seconds.\n
* Influence: at runtime.\n
* Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 seconds\n
* The parameter is saved into the CC3000 NVMEM.\n
* The default value on CC3000 is 3600 seconds.\n
*
* \param keep_alive Keepalive event sent by the end of keepalive timeout\n
* Range: [0-0xffffffff] seconds, 0 == infinite timeout\n
* Resolution: 10 seconds.\n
* Influence: at runtime.\n
* Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec\n
* The parameter is saved into the CC3000 NVMEM. \n
* The default value on CC3000 is 10 seconds.\n
*
* \param inactivity Socket inactivity timeout, socket timeout is\n
* refreshed by incoming or outgoing packet, by the\n
* end of the socket timeout the socket will be closed\n
* Range: [0-0xffffffff] sec, 0 == infinite timeout.\n
* Resolution: 10 seconds.\n
* Influence: at runtime.\n
* Minimal bound value: MIN_TIMER_VAL_SECONDS - 20 sec\n
* The parameter is saved into the CC3000 NVMEM.\n
* The default value on CC3000 is 60 seconds.\n
*
* \return 0 on success,otherwise error.
*
* \note A parameter set to a non zero value less than 20s automatically changes to 20s.
*/
int32_t timeout_values(uint32_t *dhcp, uint32_t *arp,uint32_t *keep_alive, uint32_t *inactivity);
/**
* \brief send ICMP ECHO_REQUEST to network hosts
* \param ip destination IP address
* \param ping_attempts number of echo requests to send
* \param ping_size send buffer size which may be up to 1400 bytes
* \param ping_timeout Time to wait for a response,in milliseconds.
* \return 0 on success, otherwise error.
*
* \note A succesful operation will generate an asynchronous ping report event.\n
* The report structure is defined by structure netapp_pingreport_args_t.\n
* \warning Calling this function while a Ping Request is in progress will kill the ping request in progress.
*/
int32_t ping_send(uint32_t *ip, uint32_t ping_attempts, uint32_t ping_size, uint32_t ping_timeout);
/**
* \brief Ping status request.
* This API triggers the CC3000 to send asynchronous events: HCI_EVNT_WLAN_ASYNC_PING_REPORT.\n
* This event will create the report structure in netapp_pingreport_args_t.\n
* This structure is filled with ping results until the API is triggered.\n
* netapp_pingreport_args_t: packets_sent - echo sent\n
* packets_received - echo reply\n
* min_round_time - minimum round time\n
* max_round_time - max round time\n
* avg_round_time - average round time\n
*
* \param none
* \return none
* \note When a ping operation is not active, the returned structure fields are 0.
*/
void ping_report();
/**
* \brief Stop any ping request.
* \param none
* \return 0 on success
* -1 on error
*/
int32_t ping_stop();
/**
* \brief Flush ARP table
* \param none
* \return none
*/
int32_t arp_flush();
#endif
private:
cc3000_simple_link &_simple_link;
cc3000_nvmem &_nvmem;
cc3000_hci &_hci;
cc3000_event &_event;
};
#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
/** Security class used only if encrypted smart config is set
*/
class cc3000_security {
public:
/**
* \brief Expand a 16 bytes key for AES128 implementation.
* \param expanded_key expanded AES128 key
* \param key AES128 key - 16 bytes
* \return none
*/
void expandKey(uint8_t *expanded_key, uint8_t *key);
/**
* \brief multiply by 2 in the galois field.
* \param value Argument to multiply
* \return multiplied argument
*/
uint8_t galois_mul2(uint8_t value);
/**
* \brief internal implementation of AES128 encryption.
* straight forward aes encryption implementation\n
* first the group of operations
* - addRoundKey
* - subbytes
* - shiftrows
* - mixcolums\n
*
* is executed 9 times, after this addroundkey to finish the 9th\n
* round, after that the 10th round without mixcolums\n
* no further subfunctions to save cycles for function calls\n
* no structuring with "for (....)" to save cycles.\n
* \param[in] expanded_key expanded AES128 key
* \param[in/out] state 16 bytes of plain text and cipher text
* \return none
*/
void aes_encr(uint8_t *state, uint8_t *expanded_key);
/**
* \brief internal implementation of AES128 decryption.
* straightforward aes decryption implementation\n
* the order of substeps is the exact reverse of decryption\n
* inverse functions:
* - addRoundKey is its own inverse
* - rsbox is inverse of sbox
* - rightshift instead of leftshift
* - invMixColumns = barreto + mixColumns\n
*
* no further subfunctions to save cycles for function calls\n
* no structuring with "for (....)" to save cycles\n
* \param[in] expanded_key expanded AES128 key
* \param[in\out] state 16 bytes of cipher text and plain text
* \return none
*/
void aes_decr(uint8_t *state, uint8_t *expanded_key);
/**
* \brief AES128 encryption.
* Given AES128 key and 16 bytes plain text, cipher text of 16 bytes is computed.\n
* The AES implementation is in mode ECB (Electronic Code Book).\n
* \param[in] key AES128 key of size 16 bytes
* \param[in\out] state 16 bytes of plain text and cipher text
* \return none
*/
void aes_encrypt(uint8_t *state, uint8_t *key);
/**
* \brief AES128 decryption.
* Given AES128 key and 16 bytes cipher text, plain text of 16 bytes is computed.\n
* The AES implementation is in mode ECB (Electronic Code Book).\n
* \param[in] key AES128 key of size 16 bytes
* \param[in\out] state 16 bytes of cipher text and plain text
* \return none
*/
void aes_decrypt(uint8_t *state, uint8_t *key);
/**
* \brief Read the AES128 key from fileID #12 in EEPROM.
* \param[out] key AES128 key of size 16 bytes
* \return 0 on success, error otherwise.
*/
int32_t aes_read_key(uint8_t *key);
/**
* \brief Write the AES128 key to fileID #12 in EEPROM.
* \param[out] key AES128 key of size 16 bytes
* \return on success 0, error otherwise.
*/
int32_t aes_write_key(uint8_t *key);
private:
uint8_t _expanded_key[176];
};
#endif
/** Socket layer
*/
class cc3000_socket {
public:
/**
* \brief Ctor
* \param simplelink Reference to simple link object.
* \param hci Reference to hci object.
* \param event Reference to event object.
* \return none
*/
cc3000_socket(cc3000_simple_link &simplelink, cc3000_hci &hci, cc3000_event &event);
/**
* \brief Dtor
* \param
* \return none
*/
~cc3000_socket();
/**
* \brief create an endpoint for communication.
* The socket function creates a socket that is bound to a specific transport service provider.\n
* This function is called by the application layer to obtain a socket handle.\n
*
* \param domain selects the protocol family which will be used for\n
* communication. On this version only AF_INET is supported\n
* \param type specifies the communication semantics. On this version\n
* only SOCK_STREAM, SOCK_DGRAM, SOCK_RAW are supported\n
* \param protocol specifies a particular protocol to be used with the\n
* socket IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW are supported.\n
* \return On success, socket handle that is used for consequent socket operations\n
* On error, -1 is returned.\n
*/
int32_t socket(int32_t domain, int32_t type, int32_t protocol);
/**
* \brief accept a connection on a socket.
* This function is used with connection-based socket types\n
* (SOCK_STREAM). It extracts the first connection request on the\n
* queue of pending connections, creates a new connected socket, and\n
* returns a new file descriptor referring to that socket.\n
* The newly created socket is not in the listening state.\n
* The original socket sd is unaffected by this call.\n
* The argument sd is a socket that has been created with socket(),\n
* bound to a local address with bind(), and is listening for \n
* connections after a listen(). The argument addr is a pointer \n
* to a sockaddr structure. This structure is filled in with the \n
* address of the peer socket, as known to the communications layer.\n
* The exact format of the address returned addr is determined by the \n
* socket's address family. The addrlen argument is a value-result\n
* argument: it should initially contain the size of the structure\n
* pointed to by addr, on return it will contain the actual\n
* length (in bytes) of the address returned.\n
*
* \param[in] sd socket descriptor (handle)\n
* \param[out] addr the argument addr is a pointer to a sockaddr structure\n
* This structure is filled in with the address of the \n
* peer socket, as known to the communications layer. \n
* determined. The exact format of the address returned \n
* addr is by the socket's address sockaddr. \n
* On this version only AF_INET is supported.\n
* This argument returns in network order.\n
* \param[out] addrlen the addrlen argument is a value-result argument: \n
* it should initially contain the size of the structure\n
* pointed to by addr.\n
* \return For socket in blocking mode:\n
* - On success, socket handle. on failure negative\n
* For socket in non-blocking mode:\n
* - On connection establishment, socket handle\n
* - On connection pending, SOC_IN_PROGRESS (-2)\n
* - On failure, SOC_ERROR (-1)\n
* \sa socket ; bind ; listen
*/
int32_t accept(int32_t sd, sockaddr *addr, socklen_t *addrlen);
/**
* \brief assign a name to a socket.
* This function gives the socket the local address addr.\n
* addr is addrlen bytes long. Traditionally, this is called when a \n
* socket is created with socket, it exists in a name space (address \n
* family) but has no name assigned.\n
* It is necessary to assign a local address before a SOCK_STREAM\n
* socket may receive connections.\n
*
* \param[in] sd socket descriptor (handle)
* \param[out] addr specifies the destination address. On this version\n
* only AF_INET is supported.\n
* \param[out] addrlen contains the size of the structure pointed to by addr.\n
* \return On success, zero is returned.\n
* On error, -1 is returned.\n
* \sa socket ; accept ; listen
*/
int32_t bind(int32_t sd, const sockaddr *addr, int32_t addrlen);
/**
* \brief HostFlowControlConsumeBuff.
* if SEND_NON_BLOCKING is not defined - block until a free buffer is available,\n
* otherwise return the status of the available buffers.\n
*
* \param sd socket descriptor
* \return 0 in case there are buffers available, \n
* -1 in case of bad socket\n
* -2 if there are no free buffers present (only when SEND_NON_BLOCKING is enabled)\n
*/
int32_t HostFlowControlConsumeBuff(int32_t sd);
/**
* \brief The socket function closes a created socket.
* \param sd socket handle.
* \return On success, zero is returned. On error, -1 is returned.
*/
int32_t closesocket(int32_t sd);
/**
* \brief listen for connections on a socket.
* The willingness to accept incoming connections and a queue\n
* limit for incoming connections are specified with listen(),\n
* and then the connections are accepted with accept.\n
* The listen() call applies only to sockets of type SOCK_STREAM\n
* The backlog parameter defines the maximum length the queue of\n
* pending connections may grow to. \n
*
* \param[in] sd socket descriptor (handle)
* \param[in] backlog specifies the listen queue depth. On this version\n
* backlog is not supported.\n
* \return On success, zero is returned.\n
* On error, -1 is returned.\n
* \sa socket ; accept ; bind
* \note On this version, backlog is not supported
*/
int32_t listen(int32_t sd, int32_t backlog);
/**
* \brief initiate a connection on a socket.
* Function connects the socket referred to by the socket descriptor\n
* sd, to the address specified by addr. The addrlen argument \n
* specifies the size of addr. The format of the address in addr is \n
* determined by the address space of the socket. If it is of type \n
* SOCK_DGRAM, this call specifies the peer with which the socket is \n
* to be associated; this address is that to which datagrams are to be\n
* sent, and the only address from which datagrams are to be received. \n
* If the socket is of type SOCK_STREAM, this call attempts to make a \n
* connection to another socket. The other socket is specified by \n
* address, which is an address in the communications space of the\n
* socket. Note that the function implements only blocking behavior \n
* thus the caller will be waiting either for the connection \n
* establishment or for the connection establishment failure.\n
*
* \param[in] sd socket descriptor (handle)
* \param[in] addr specifies the destination addr. On this version\n
* only AF_INET is supported.\n
* \param[out] addrlen contains the size of the structure pointed to by addr
* \return On success, zero is returned.\n
On error, -1 is returned\n
* \sa socket
*/
int32_t connect(int32_t sd, const sockaddr *addr, int32_t addrlen);
/**
* \brief Monitor socket activity.
* Select allow a program to monitor multiple file descriptors,\n
* waiting until one or more of the file descriptors become \n
* "ready" for some class of I/O operation \n
*
* \param[in] nfds the highest-numbered file descriptor in any of the\n
* three sets, plus 1. \n
* \param[out] readsds socket descriptors list for read monitoring\n
* \param[out] writesds socket descriptors list for write monitoring\n
* \param[out] exceptsds socket descriptors list for exception monitoring\n
* \param[in] timeout is an upper bound on the amount of time elapsed\n
* before select() returns. Null means infinity \n
* timeout. The minimum timeout is 5 milliseconds,\n
* less than 5 milliseconds will be set\n
* automatically to 5 milliseconds.\n
* \return On success, select() returns the number of file descriptors\n
* contained in the three returned descriptor sets (that is, the\n
* total number of bits that are set in readfds, writefds,\n
* exceptfds) which may be zero if the timeout expires before\n
* anything interesting happens.\n
* On error, -1 is returned.\n
* *readsds - return the sockets on which Read request will\n
* return without delay with valid data.\n
* *writesds - return the sockets on which Write request \n
* will return without delay.\n
* *exceptsds - return the sockets which closed recently.\n
* \Note If the timeout value set to less than 5ms it will automatically\n
* change to 5ms to prevent overload of the system\n
* \sa socket
*/
int32_t select(int32_t nfds, fd_set *readsds, fd_set *writesds, fd_set *exceptsds, struct timeval *timeout);
/**
* \brief get socket options.
* This function manipulate the options associated with a socket.\n
* Options may exist at multiple protocol levels; they are always\n
* present at the uppermost socket level.\n
* When manipulating socket options the level at which the option \n
* resides and the name of the option must be specified. \n
* To manipulate options at the socket level, level is specified as \n
* SOL_SOCKET. To manipulate options at any other level the protocol \n
* number of the appropriate protocol controlling the option is \n
* supplied. For example, to indicate that an option is to be \n
* interpreted by the TCP protocol, level should be set to the \n
* protocol number of TCP; \n
* The parameters optval and optlen are used to access optval -\n
* use for setsockopt(). For getsockopt() they identify a buffer\n
* in which the value for the requested option(s) are to \n
* be returned. For getsockopt(), optlen is a value-result \n
* parameter, initially containing the size of the buffer \n
* pointed to by option_value, and modified on return to \n
* indicate the actual size of the value returned. If no option \n
* value is to be supplied or returned, option_value may be NULL.\n
*
* \param[in] sd socket handle
* \param[in] level defines the protocol level for this option
* \param[in] optname defines the option name to Interrogate
* \param[out] optval specifies a value for the option
* \param[out] optlen specifies the length of the option value
* \return On success, zero is returned. On error, -1 is returned
*
* \Note On this version the following two socket options are enabled:\n
* The only protocol level supported in this version is SOL_SOCKET (level).\n
* 1. SOCKOPT_RECV_TIMEOUT (optname)\n
* SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout in milliseconds.\n
* In that case optval should be pointer to unsigned long.\n
* 2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on or off.\n
* In that case optval should be SOCK_ON or SOCK_OFF (optval).\n
* \sa setsockopt
*/
int32_t getsockopt (int32_t sd, int32_t level, int32_t optname, void *optval, socklen_t *optlen);
/**
* \brief Read data from socket (simple_link_recv).
* Return the length of the message on successful completion.\n
* If a message is too long to fit in the supplied buffer, excess bytes may\n
* be discarded depending on the type of socket the message is received from.\n
*
* \param sd socket handle
* \param buf read buffer
* \param len buffer length
* \param flags indicates blocking or non-blocking operation
* \param from pointer to an address structure indicating source address
* \param fromlen source address structure size
* \return Return the number of bytes received, or -1 if an error occurred
*/
int32_t simple_link_recv(int32_t sd, void *buf, int32_t len, int32_t flags, sockaddr *from, socklen_t *fromlen, int32_t opcode);
/**
* \brief Transmit a message to another socket (simple_link_send).
* \param sd socket handle
* \param buf write buffer
* \param len buffer length
* \param flags On this version, this parameter is not supported
* \param to pointer to an address structure indicating destination address
* \param tolen destination address structure size
* \return Return the number of bytes transmitted, or -1 if an error\n
* occurred, or -2 in case there are no free buffers available\n
* (only when SEND_NON_BLOCKING is enabled)\n
*/
int32_t simple_link_send(int32_t sd, const void *buf, int32_t len, int32_t flags, const sockaddr *to, int32_t tolen, int32_t opcode);
/**
* \brief Receive a message from a connection-mode socket.
* \param[in] sd socket handle
* \param[out] buf Points to the buffer where the message should be stored
* \param[in] len Specifies the length in bytes of the buffer pointed to \n
* by the buffer argument.\n
* \param[in] flags Specifies the type of message reception. \n
* On this version, this parameter is not supported.\n
* \return Return the number of bytes received, or -1 if an error occurred
* \sa recvfrom
* \Note On this version, only blocking mode is supported.
*/
int32_t recv(int32_t sd, void *buf, int32_t len, int32_t flags);
/**
* \brief read data from socket (recvfrom).
* Receives a message from a connection-mode or connectionless-mode socket.\n
* Note that raw sockets are not supported.\n
*
* \param[in] sd socket handle
* \param[out] buf Points to the buffer where the message should be stored
* \param[in] len Specifies the length in bytes of the buffer pointed to \n
* by the buffer argument.\n
* \param[in] flags Specifies the type of message reception.\n
* On this version, this parameter is not supported.\n
* \param[in] from pointer to an address structure indicating the source\n
* address: sockaddr. On this version only AF_INET is\n
* supported.\n
* \param[in] fromlen source address structure size
* \return Return the number of bytes received, or -1 if an error occurred
* \sa recv
* \Note On this version, only blocking mode is supported.
*/
int32_t recvfrom(int32_t sd, void *buf, int32_t len, int32_t flags, sockaddr *from, socklen_t *fromlen);
/**
* \brief Transmit a message to another socket (send).
* \param sd socket handle
* \param buf Points to a buffer containing the message to be sent
* \param len message size in bytes
* \param flags On this version, this parameter is not supported
* \return Return the number of bytes transmitted, or -1 if an\n
* error occurred\n
* \Note On this version, only blocking mode is supported.
* \sa sendto
*/
int32_t send(int32_t sd, const void *buf, int32_t len, int32_t flags);
/**
* \brief Transmit a message to another socket (sendto).
* \param sd socket handle
* \param buf Points to a buffer containing the message to be sent
* \param len message size in bytes
* \param flags On this version, this parameter is not supported
* \param to pointer to an address structure indicating the destination\n
* address: sockaddr. On this version only AF_INET is\n
* supported.\n
* \param tolen destination address structure size
* \return Return the number of bytes transmitted, or -1 if an error occurred
* \Note On this version, only blocking mode is supported.
* \sa send
*/
int32_t sendto(int32_t sd, const void *buf, int32_t len, int32_t flags, const sockaddr *to, socklen_t tolen);
/**
* \brief Set CC3000 in mDNS advertiser mode in order to advertise itself.
* \param[in] mdns_enabled flag to enable/disable the mDNS feature
* \param[in] device_service_name Service name as part of the published\n
* canonical domain name\n
* \param[in] device_service_name_length Length of the service name
* \return On success, zero is returned,\n
* return SOC_ERROR if socket was not opened successfully, or if an error occurred.\n
*/
int32_t mdns_advertiser(uint16_t mdns_enabled, uint8_t * device_service_name, uint16_t device_service_name_length);
/**
* \brief
* \param[in] s_addr in host format ( little endian )
* \param[in] *buf buffer to write too
* \param[in] buflen length of supplied buffer
* \return pointer to buf \n
*/
char * inet_ntoa_r(uint32_t s_addr, char *buf, int buflen);
#ifndef CC3000_TINY_DRIVER
/**
* \brief Get host IP by name.\n
* Obtain the IP Address of machine on network\n
*
* \param[in] hostname host name
* \param[in] name_length name length
* \param[out] out_ip_addr This parameter is filled in with host IP address.\n
* In case that host name is not resolved, \n
* out_ip_addr is zero.\n
* \return On success, positive is returned.\n
* On error, negative is returned by its name.\n
* \note On this version, only blocking mode is supported. Also note that\n
* The function requires DNS server to be configured prior to its usage.\n
*/
int32_t gethostbyname(uint8_t *hostname, uint16_t name_length, uint32_t *out_ip_addr);
/**
* \brief set socket options.
* This function manipulate the options associated with a socket.\n
* Options may exist at multiple protocol levels; they are always\n
* present at the uppermost socket level.\n
* When manipulating socket options the level at which the option \n
* resides and the name of the option must be specified.\n
* To manipulate options at the socket level, level is specified as\n
* SOL_SOCKET. To manipulate options at any other level the protocol \n
* number of the appropriate protocol controlling the option is \n
* supplied. For example, to indicate that an option is to be \n
* interpreted by the TCP protocol, level should be set to the \n
* protocol number of TCP; \n
* The parameters optval and optlen are used to access optval - \n
* use for setsockopt(). For getsockopt() they identify a buffer\n
* in which the value for the requested option(s) are to \n
* be returned. For getsockopt(), optlen is a value-result \n
* parameter, initially containing the size of the buffer \n
* pointed to by option_value, and modified on return to \n
* indicate the actual size of the value returned. If no option \n
* value is to be supplied or returned, option_value may be NULL.\n
*
* \param[in] sd socket handle
* \param[in] level defines the protocol level for this option
* \param[in] optname defines the option name to Interrogate
* \param[in] optval specifies a value for the option
* \param[in] optlen specifies the length of the option value
* \return On success, zero is returned.\n
* On error, -1 is returned\n
*
* \Note On this version the following two socket options are enabled:\n
* The only protocol level supported in this version is SOL_SOCKET (level).\n
* 1. SOCKOPT_RECV_TIMEOUT (optname)\n
* SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout in milliseconds.\n
* In that case optval should be pointer to unsigned long.\n
* 2. SOCKOPT_NONBLOCK (optname). sets the socket non-blocking mode on or off.\n
* In that case optval should be SOCK_ON or SOCK_OFF (optval).\n
* \sa getsockopt
*/
int32_t setsockopt(int32_t sd, int32_t level, int32_t optname, const void *optval, socklen_t optlen);
#endif
private:
cc3000_simple_link &_simple_link;
cc3000_hci &_hci;
cc3000_event &_event;
};
/** SPI communication layer
*/
class cc3000_spi {
public:
/**
* \brief Ctor
* \param irq IRQ pin
* \param cc3000_en Enable pin
* \param cc3000_cs Chip select pin
* \param cc3000_spi SPI object
* \param irq_port Port for IRQ pin (needed for enable/disable interrupts)
* \param event Reference to the event object.
* \param simple_link Reference to the simple link object.
* \return none
*/
cc3000_spi(PinName cc3000_irq, PinName cc3000_en, PinName cc3000_cs, SPI cc3000_spi, IRQn_Type irq_port, cc3000_event &event, cc3000_simple_link &simple_link);
/**
* \brief Dtor
* \param none
* \return none
*/
~cc3000_spi();
/**
* \brief Close SPI - disables IRQ and set received buffer to 0
* \param none
* \return none
*/
void close();
/**
* \brief Open the SPI interface
* \param none
* \return none
*/
void open();
/**
* \brief First SPI write after powerup (delay needed between SPI header and body)
* \param buffer pointer to write buffer
* \param length buffer length
* \return 0
*/
uint32_t first_write(uint8_t *buffer, uint16_t length);
/**
* \brief SPI Write function
* \param buffer pointer to write buffer
* \param length buffer length
* \return 0
*/
uint32_t write(uint8_t *buffer, uint16_t length);
/**
* \brief Low level SPI write
* \param data pointer to data buffer
* \param size number of bytes
* \return none
*/
void write_synchronous(uint8_t *data, uint16_t size);
/**
* \brief Low level SPI read
* \param data pointer to data buffer
* \param size number of bytes
* \return none
*/
void read_synchronous(uint8_t *data, uint16_t size);
/**
* \brief Process the received SPI Header and in accordance with it - continue reading the packet
* \param None
* \return 0
*/
uint32_t read_data_cont();
/**
* \brief Enable WLAN interrutp
* \param None
* \return None
*/
void wlan_irq_enable();
/**
* \brief Disable WLAN interrutp
* \param None
* \return None
*/
void wlan_irq_disable();
/**
* \brief Get WLAN interrupt status
* \param None
* \return 0 : No interrupt occured
* 1 : Interrupt occured
*/
uint32_t wlan_irq_read();
/**
* \brief SPI interrupt Handler.
* The external WLAN device asserts the IRQ line when data is ready.\n
* The host CPU needs to acknowledges the IRQ by asserting CS.\n
*
* \param none
* \return none
*/
void WLAN_IRQHandler();
/**
* \brief Enable/Disable the WLAN module
* \param value 1 : Enable
* 0 : Disable
* \return None
*/
void set_wlan_en(uint8_t value);
private:
tSpiInfo _spi_info;
InterruptIn _wlan_irq;
DigitalOut _wlan_en;
DigitalOut _wlan_cs;
SPI _wlan_spi;
IRQn_Type _irq_port;
pFunctionPointer_t _function_pointer;
cc3000_event &_event;
cc3000_simple_link &_simple_link;
};
/** HCI layer
*/
class cc3000_hci {
public:
/**
* \brief Ctor
* \param spi Reference to the spi object.
* \return none
*/
cc3000_hci(cc3000_spi &spi);
/**
* \brief Dtor
* \param none
* \return none
*/
~cc3000_hci();
/**
* \brief Initiate an HCI command.
* \param op_code command operation code
* \param buffer pointer to the command's arguments buffer
* \param length length of the arguments
* \return 0
*/
uint16_t command_send(uint16_t op_code, uint8_t *buffer, uint8_t length);
/**
* \brief Initiate an HCI data write operation
* \param op_code command operation code
* \param args pointer to the command's arguments buffer
* \param arg_length length of the arguments
* \param data_length length od data
* \param tail pointer to the data buffer
* \param tail_length buffer length
* \return ESUCCESS
*/
uint32_t data_send(uint8_t op_code, uint8_t *args, uint16_t arg_length,
uint16_t data_length, const uint8_t *tail, uint16_t tail_length);
/**
* \brief Prepare HCI header and initiate an HCI data write operation.
* \param op_code command operation code
* \param buffer pointer to the data buffer
* \param arg_length arguments length
* \param data_length data length
* \return none
*/
void data_command_send(uint16_t op_code, uint8_t *buffer, uint8_t arg_length,
uint16_t data_length);
/**
* \brief Prepare HCI header and initiate an HCI patch write operation.
* \param op_code command operation code
* \param buffer pointer to the command's arguments buffer
* \param patch pointer to patch content buffer
* \param data_length data length
* \return none
*/
void patch_send(uint8_t op_code, uint8_t *buffer, uint8_t *patch, uint16_t data_length);
private:
cc3000_spi &_spi;
};
/** NVMEM layer
*/
class cc3000_nvmem {
public:
/**
* \brief Ctor
* \param hci Reference to the hci object.
* \param event Reference to the event object.
* \param simple_link Reference to the simple link object.
* \return none
*/
cc3000_nvmem(cc3000_hci &hci, cc3000_event &event, cc3000_simple_link &simple_link);
/**
* \brief Dtor
* \param none
* \return none
*/
~cc3000_nvmem();
/**
* \brief Reads data from the file referred by the file_id parameter.
* Reads data from file offset till length. Err if the file can't be used,
* is invalid, or if the read is out of bounds.
* \param file_id nvmem file id.
* \param length number of bytes to read.
* \param offset offset in file from where to read.
* \param buff output buffer pointer.
* \return
* Number of bytes read, otherwise error.
*/
int32_t read(uint32_t file_id, uint32_t length, uint32_t offset, uint8_t *buff);
/**
* \brief Write data to nvmem.
* \param file_id Nvmem file id
* \param length number of bytes to write
* \param entry_offset offset in file to start write operation from
* \param buff data to write
* \return
* On success 0, error otherwise.
*/
int32_t write(uint32_t file_id, uint32_t length, uint32_t entry_offset, uint8_t *buff);
/**
* \brief Write MAC address to EEPROM.
* \param mac Mac address to be set
* \return
* On success 0, error otherwise.
*/
uint8_t set_mac_address(uint8_t *mac);
/**
* \brief Read MAC address from EEPROM.
* \param mac Mac address
* \return
* On success 0, error otherwise.
*/
uint8_t get_mac_address(uint8_t *mac);
/**
* \brief Program a patch to a specific file ID. The SP data is assumed to be organized in 2-dimensional.
* Each line is SP_PORTION_SIZE bytes long.
* \param file_id nvmem file id/
* \param length number of bytes to write
* \param data SP data to write
* \return
* On success 0, error otherwise.
*/
uint8_t write_patch(uint32_t file_id, uint32_t length, const uint8_t *data);
/**
* \brief Create new file entry and allocate space on the NVMEM. Applies only to user files.
* \param file_id nvmem file Id
* \param new_len entry ulLength
* \return
*/
int32_t create_entry(uint32_t file_id, uint32_t new_len);
#ifndef CC3000_TINY_DRIVER
/**
* \brief Read patch version. read package version (WiFi FW patch, river-supplicant-NS patch,
* bootloader patch)
* \param patch_ver First number indicates package ID and the second number indicates
* package build number
* \return
* On success 0, error otherwise.
*/
uint8_t read_sp_version(uint8_t* patch_ver);
#endif
private:
cc3000_hci &_hci;
cc3000_event &_event;
cc3000_simple_link &_simple_link;
};
/** WLAN layer
*/
class cc3000_wlan {
public:
/**
* \brief Ctor
* \param simple_link Reference to the simple link object.
* \param event Reference to the event object.
* \param spi Reference to the spi object.
* \param hci Reference to the hci object.
* \return none
*/
cc3000_wlan(cc3000_simple_link &simple_link, cc3000_event &event, cc3000_spi &spi, cc3000_hci &hci);
/**
* \brief Dtor
* \param none
* \return none
*/
~cc3000_wlan();
/**
* \brief Send SIMPLE LINK START to cc3000.
* \param patches_available_host Flag to indicate if patches are available.
* \return none
*/
void simpleLink_init_start(uint16_t patches_available_host);
/**
* \brief Start wlan device. Blocking call until init is completed.
* \param patches_available_host Flag to indicate if patches are available.
* \return none
*/
void start(uint16_t patches_available_host);
/**
* \brief Stop wlan device
* \param none
* \return none
*/
void stop(void);
#ifndef CC3000_TINY_DRIVER
/**
* \brief Connect to AP.
* \param sec_type Security option.
* \param ssid up to 32 bytes, ASCII SSID
* \param ssid_length length of SSID
* \param b_ssid 6 bytes specified the AP bssid
* \param key up to 16 bytes specified the AP security key
* \param key_len key length
* \return
* On success, zero is returned. On error, negative is returned.
*/
int32_t connect(uint32_t sec_type, const uint8_t *ssid, int32_t ssid_length, uint8_t *b_ssid, uint8_t *key, int32_t key_len);
/**
* \brief Add profile. Up to 7 profiles are supported.
* \param sec_type Security option.
* \param ssid Up to 32 bytes, ASCII SSID
* \param ssid_length Length of SSID
* \param b_ssid 6 bytes specified the AP bssid
* \param priority Up to 16 bytes specified the AP security key
* \param pairwise_cipher_or_tx_key_len Key length
* \param group_cipher_tx_key_index Key length for WEP security
* \param key_mgmt KEY management
* \param pf_or_key Security key
* \param pass_phrase_length Security key length for WPA\WPA2
* \return
* On success, zero is returned. On error, negative is returned.
*/
int32_t add_profile(uint32_t sec_type, uint8_t* ssid, uint32_t ssid_length, uint8_t *b_ssid, uint32_t priority, uint32_t pairwise_cipher_or_tx_key_len, uint32_t group_cipher_tx_key_index,
uint32_t key_mgmt, uint8_t* pf_or_key, uint32_t pass_phrase_length);
/**
* \brief Gets entry from scan result table. The scan results are returned
* one by one, and each entry represents a single AP found in the area.
* \param scan_timeout Not supported yet
* \param results Scan result
* \return
* On success, zero is returned. On error, -1 is returned
*/
int32_t ioctl_get_scan_results(uint32_t scan_timeout, uint8_t *results);
/**
* \brief Start and stop scan procedure. Set scan parameters.
* \param enable Start/stop application scan
* \param min_dwell_time Minimum dwell time value to be used for each channel, in ms. (Default: 20)
* \param max_dwell_time Maximum dwell time value to be used for each channel, in ms. (Default: 30)
* \param num_probe_requests Max probe request between dwell time. (Default:2)
* \param channel_mask Bitwise, up to 13 channels (0x1fff).
* \param rssi_threshold RSSI threshold. Saved: yes (Default: -80)
* \param snr_threshold NSR threshold. Saved: yes (Default: 0)
* \param default_tx_power probe Tx power. Saved: yes (Default: 205)
* \param interval_list Pointer to array with 16 entries (16 channels)
* \return
* On success, zero is returned. On error, -1 is returned.
*/
int32_t ioctl_set_scan_params(uint32_t enable, uint32_t min_dwell_time, uint32_t max_dwell_time, uint32_t num_probe_requests,
uint32_t channel_mask, int32_t rssi_threshold, uint32_t snr_threshold, uint32_t default_tx_power, uint32_t *interval_list);
/**
* \brief Get wlan status: disconnected, scanning, connecting or connected
* \param none
* \return
* WLAN_STATUS_DISCONNECTED, WLAN_STATUS_SCANING, STATUS_CONNECTING or WLAN_STATUS_CONNECTED
*/
int32_t ioctl_statusget(void);
#else
/**
* \brief Connect to AP
* \param ssid Up to 32 bytes and is ASCII SSID of the AP
* \param ssid_length Length of the SSID
* \return
* On success, zero is returned. On error, negative is returned.
*/
int32_t connect(const uint8_t *ssid, int32_t ssid_length);
/**
* \brief When auto start is enabled, the device connects to station from the profiles table.
* If several profiles configured the device choose the highest priority profile.
* \param sec_type WLAN_SEC_UNSEC,WLAN_SEC_WEP,WLAN_SEC_WPA,WLAN_SEC_WPA2
* \param ssid SSID up to 32 bytes
* \param ssid_length SSID length
* \param b_ssid bssid 6 bytes
* \param priority Profile priority. Lowest priority:0.
* \param pairwise_cipher_or_tx_key_len Key length for WEP security
* \param group_cipher_tx_key_index Key index
* \param key_mgmt KEY management
* \param pf_or_key Security key
* \param pass_phrase_length Security key length for WPA\WPA2
* \return
* On success, zero is returned. On error, -1 is returned
*/
int32_t add_profile(uint32_t sec_type, uint8_t *ssid, uint32_t ssid_length, uint8_t *b_ssid, uint32_t priority,
uint32_t pairwise_cipher_or_tx_key_len, uint32_t group_cipher_tx_key_index, uint32_t key_mgmt,
uint8_t* pf_or_key, uint32_t pass_phrase_length);
#endif
#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
/**
* \brief Process the acquired data and store it as a profile.
* \param none
* \return
* On success, zero is returned. On error, -1 is returned.
*/
int32_t smart_config_process(void);
#endif
/**
* \brief Disconnect connection from AP.
* \param none
* \return
* 0 if disconnected done, other CC3000 already disconnected.
*/
int32_t disconnect();
/**
* \brief When auto is enabled, the device tries to connect according the following policy:
* 1) If fast connect is enabled and last connection is valid, the device will try to
* connect to it without the scanning procedure (fast). The last connection will be
* marked as invalid, due to adding/removing profile.
* 2) If profile exists, the device will try to connect it (Up to seven profiles).
* 3) If fast and profiles are not found, and open mode is enabled, the device
* will try to connect to any AP.
* Note that the policy settings are stored in the CC3000 NVMEM.
* \param should_connect_to_open_ap Enable(1), disable(0) connect to any available AP.
* \param use_fast_connect Enable(1), disable(0). if enabled, tries to
* connect to the last connected AP.
* \param use_profiles Enable(1), disable(0) auto connect after reset.
* and periodically reconnect if needed.
* \return
* On success, zero is returned. On error, -1 is returned
*/
int32_t ioctl_set_connection_policy(uint32_t should_connect_to_open_ap, uint32_t use_fast_connect, uint32_t use_profiles);
/**
* \brief Delete WLAN profile
* \param index Number of profile to delete
* \return
* On success, zero is returned. On error, -1 is returned
*/
int32_t ioctl_del_profile(uint32_t index);
/**
* \brief Mask event according to bit mask. In case that event is
* masked (1), the device will not send the masked event to host.
* \param mask event mask
* \return
* On success, zero is returned. On error, -1 is returned
*/
int32_t set_event_mask(uint32_t mask);
/**
* \brief Start to acquire device profile. The device acquire its own
* profile, if profile message is found.
* \param encrypted_flag Indicates whether the information is encrypted
* \return
* On success, zero is returned. On error, -1 is returned.
*/
int32_t smart_config_start(uint32_t encrypted_flag);
/**
* \brief Stop the acquire profile procedure.
* \param none
* \return
* On success, zero is returned. On error, -1 is returned
*/
int32_t smart_config_stop(void);
/**
* \brief Configure station ssid prefix.
* \param new_prefix 3 bytes identify the SSID prefix for the Smart Config.
* \return
* On success, zero is returned. On error, -1 is returned.
*/
int32_t smart_config_set_prefix(uint8_t *new_prefix);
private:
cc3000_simple_link &_simple_link;
cc3000_event &_event;
cc3000_spi &_spi;
cc3000_hci &_hci;
};
/** The main object of cc3000 implementation
*/
class cc3000 {
public:
/** status structure */
typedef struct {
bool dhcp;
bool connected;
uint8_t socket;
bool smart_config_complete;
bool stop_smart_config;
bool dhcp_configured;
bool ok_to_shut_down;
bool enabled;
} tStatus;
/**
* \brief Ctor.
* \param cc3000_irq IRQ pin
* \param cc3000_en Enable pin
* \param cc3000_cs Chip select pin
* \param cc3000_spi SPI interface
* \param irq_port IRQ pin's port
*/
cc3000(PinName cc3000_irq, PinName cc3000_en, PinName cc3000_cs, SPI cc3000_spi, IRQn_Type irq_port);
/**
* \brief Dtor.
*/
~cc3000();
/**
* \brief Initiate cc3000. It starts the wlan communication and deletes profiles.
* \param patch Patch
*/
void start(uint8_t patch);
/**
* \brief Stops the wlan communication.
*/
void stop();
/**
* \brief Restarts the wlan communication.
*/
void restart(uint8_t patch);
/**
* \brief Disconnect wlan device
*
*/
bool disconnect(void);
/**
* \brief Callback which is called from the event class. This updates status of cc3000.
* \param event_type Type of the event
* \param data Pointer to data
* \param length Length of data
* \return none
*/
void usync_callback(int32_t event_type, uint8_t *data, uint8_t length);
/**
* \brief Start connection to SSID (open/secured) non-blocking
* \param ssid SSID name
* \param key Security key (if key = 0, open connection)
* \param security_mode Security mode
* \return true if connection was established, false otherwise.
*/
bool connect_non_blocking(const uint8_t *ssid, const uint8_t *key, int32_t security_mode);
/**
* \brief Connect to SSID (open/secured) with timeout (10s).
* \param ssid SSID name
* \param key Security key (if key = 0, open connection)
* \param security_mode Security mode
* \return true if connection was established, false otherwise.
*/
bool connect_to_AP(const uint8_t *ssid, const uint8_t *key, int32_t security_mode);
/**
* \brief Connect to SSID which is secured
* \param ssid SSID name
* \param key Security key
* \param security_mode Security mode
* \return true if connection was established, false otherwise.
*/
bool connect_secure(const uint8_t *ssid, const uint8_t *key, int32_t security_mode);
/**
* \brief Connect to SSID which is open (no security)
* \param ssid SSID name
* \return true if connection was established, false otherwise.
*/
bool connect_open(const uint8_t *ssid);
/**
* \brief Status of the cc3000 module.
* \return true if it's enabled, false otherwise.
*/
bool is_enabled();
/**
* \brief Status of the cc3000 connection.
* \return true if it's connected, false otherwise.
*/
bool is_connected();
/**
* \brief Status of DHCP.
* \param none
* \return true if DCHP is configured, false otherwise.
*/
bool is_dhcp_configured();
/**
* \brief Status of smart confing completation.
* \param none
* \return smart config was set, false otherwise.
*/
bool is_smart_confing_completed();
/**
* \brief Return the cc3000's mac address.
* \param address Retreived mac address.
* \return
*/
uint8_t get_mac_address(uint8_t address[6]);
/**
* \brief Set the cc3000's mac address.
* \param address Mac address to be set.
* \return
*/
uint8_t set_mac_address(uint8_t address[6]);
/**
* \brief Get user file info.
* \param info_file Pointer where info will be stored.
* \param size Available size.
* \return none
*/
void get_user_file_info(uint8_t *info_file, size_t size);
/**
* \brief Set user filo info.
* \param info_file Pointer to user's info.
* \return none
*/
void set_user_file_info(uint8_t *info_file, size_t size);
/**
* \brief Start smart config.
* \param smart_config_key Pointer to smart config key.
* \return none
*/
void start_smart_config(const uint8_t *smart_config_key); /* TODO enable AES ? */
#ifndef CC3000_TINY_DRIVER
/**
* \brief Return ip configuration.
* \param ip_config Pointer to ipconfig data.
* \return true if it's connected and info was retrieved, false otherwise.
*/
bool get_ip_config(tNetappIpconfigRetArgs *ip_config);
#endif
/**
* \brief Delete all stored profiles.
* \param none
* \return none
*/
void delete_profiles(void);
/**
* \brief Ping an ip address.
* \param ip Destination IP address
* \param attempts Number of attempts
* \param timeout Time to wait for a response,in milliseconds.
* \param size Send buffer size which may be up to 1400 bytes
*/
uint32_t ping(uint32_t ip, uint8_t attempts, uint16_t timeout, uint8_t size);
/**
* \brief Returns cc3000 instance. Used in Socket interface.
* \param none
* \return Pointer to cc3000 object
*/
static cc3000 *get_instance() {
return _inst;
}
#if (CC3000_ETH_COMPAT == 1)
/**
* \brief Get the MAC address of your Ethernet interface.
* \param none
* \return
* Pointer to a string containing the MAC address.
*/
char* getMACAddress();
/**
* \brief Get the IP address of your Ethernet interface.
* \param none
* \return
* Pointer to a string containing the IP address.
*/
char* getIPAddress();
/**
* \brief Get the Gateway address of your Ethernet interface
* \param none
* \return
* Pointer to a string containing the Gateway address
*/
char* getGateway();
/**
* \brief Get the Network mask of your Ethernet interface
* \param none
* \return
* Pointer to a string containing the Network mask
*/
char* getNetworkMask();
#endif
public:
cc3000_simple_link _simple_link;
cc3000_event _event;
#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
cc3000_security _security;
#endif
cc3000_socket _socket;
cc3000_spi _spi;
cc3000_hci _hci;
cc3000_nvmem _nvmem;
cc3000_netapp _netapp;
cc3000_wlan _wlan;
protected:
static cc3000 *_inst;
private:
tStatus _status;
netapp_pingreport_args_t _ping_report;
bool _closed_sockets[MAX_SOCKETS];
};
/**
* Copy 32 bit to stream while converting to little endian format.
* @param p pointer to the new stream
* @param u32 pointer to the 32 bit
* @return pointer to the new stream
*/
uint8_t *UINT32_TO_STREAM_f (uint8_t *p, uint32_t u32);
/**
* Copy 16 bit to stream while converting to little endian format.
* @param p pointer to the new stream
* @param u32 pointer to the 16 bit
* @return pointer to the new stream
*/
uint8_t *UINT16_TO_STREAM_f (uint8_t *p, uint16_t u16);
/**
* Copy received stream to 16 bit in little endian format.
* @param p pointer to the stream
* @param offset offset in the stream
* @return pointer to the new 16 bit
*/
uint16_t STREAM_TO_UINT16_f(uint8_t* p, uint16_t offset);
/**
* Copy received stream to 32 bit in little endian format.
* @param p pointer to the stream
* @param offset offset in the stream
* @return pointer to the new 32 bit
*/
uint32_t STREAM_TO_UINT32_f(uint8_t* p, uint16_t offset);
} /* end of mbed_cc3000 namespace */
#endif