Vergil Cola
Fork of my MQTTGateway
Diff: easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_gpio.h
- Revision:
- 0:f1d3878b8dd9
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_gpio.h Sat Apr 08 14:45:51 2017 +0000
@@ -0,0 +1,224 @@
+/**
+******************************************************************************
+* @file radio_gpio.h
+* @author System Lab - NOIDA
+* @version V1.0.0
+* @date 15-May-2014
+* @brief This file contains all the functions prototypes for the gpio
+******************************************************************************
+* @attention
+*
+* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+* 1. Redistributions of source code must retain the above copyright notice,
+* this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright notice,
+* this list of conditions and the following disclaimer in the documentation
+* and/or other materials provided with the distribution.
+* 3. Neither the name of STMicroelectronics nor the names of its contributors
+* may be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported Variables ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __RADIO_GPIO_H
+#define __RADIO_GPIO_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#ifdef USE_STM32L1XX_NUCLEO
+#include "stm32l1xx_hal.h"
+#endif
+
+#ifdef USE_STM32F4XX_NUCLEO
+#include "stm32f4xx_hal.h"
+#endif
+#include "SPIRIT_Types.h"
+
+/**
+ * @addtogroup BSP
+ * @{
+ */
+
+
+/* Exported types ------------------------------------------------------------*/
+ /* MCU GPIO pin working mode for GPIO */
+typedef enum
+{
+ RADIO_MODE_GPIO_IN = 0x00, /*!< Work as GPIO input */
+ RADIO_MODE_EXTI_IN, /*!< Work as EXTI */
+ RADIO_MODE_GPIO_OUT, /*!< Work as GPIO output */
+}RadioGpioMode;
+
+ /* MCU GPIO pin enumeration for GPIO */
+typedef enum
+{
+ RADIO_GPIO_0 = 0x00, /*!< GPIO_0 selected */
+ RADIO_GPIO_1 = 0x01, /*!< GPIO_1 selected */
+ RADIO_GPIO_2 = 0x02, /*!< GPIO_2 selected */
+ RADIO_GPIO_3 = 0x03, /*!< GPIO_3 selected */
+ RADIO_GPIO_SDN = 0x04, /*!< GPIO_SDN selected */
+}
+RadioGpioPin;
+
+
+/* Exported constants --------------------------------------------------------*/
+
+
+/* Exported macro ------------------------------------------------------------*/
+ /* MCU GPIO pin working mode for GPIO */
+#define IS_RADIO_GPIO_MODE(MODE) (((MODE) == RADIO_MODE_GPIO_IN) || \
+ ((MODE) == RADIO_MODE_EXTI_IN) || \
+ ((MODE) == RADIO_MODE_GPIO_OUT))
+
+/* Number of Arduino pins used for RADIO GPIO interface */
+#define RADIO_GPIO_NUMBER ((uint8_t)5)
+
+/* MCU GPIO pin enumeration for GPIO */
+#define IS_RADIO_GPIO_PIN(PIN) (((PIN) == RADIO_GPIO_0) || \
+ ((PIN) == RADIO_GPIO_1) || \
+ ((PIN) == RADIO_GPIO_2) || \
+ ((PIN) == RADIO_GPIO_3) || \
+ ((PIN) == RADIO_GPIO_SDN))
+
+/* Define for RADIO board */
+#if !defined (USE_SPIRIT1_DEFAULT)
+ #define USE_SPIRIT1_DEFAULT
+#endif
+
+/* @defgroup Radio_Gpio_config_Define */
+/*NOTE: GPIO0, GPIO1, GPIO2 of SPIRIT1 is not used in the shield*/
+
+#define RADIO_GPIO_0_PORT GPIOC
+#define RADIO_GPIO_0_PIN GPIO_PIN_1
+#define RADIO_GPIO_0_CLOCK_ENABLE() __GPIOC_CLK_ENABLE()
+#define RADIO_GPIO_0_CLOCK_DISABLE() __GPIOC_CLK_ENABLE()
+#define RADIO_GPIO_0_SPEED GPIO_SPEED_HIGH
+#define RADIO_GPIO_0_PUPD GPIO_NOPULL
+#define RADIO_GPIO_0_EXTI_LINE GPIO_PIN_1
+#define RADIO_GPIO_0_EXTI_MODE GPIO_MODE_IT_FALLING
+#define RADIO_GPIO_0_EXTI_IRQN EXTI1_IRQn
+#define RADIO_GPIO_0_EXTI_PREEMPTION_PRIORITY 2
+#define RADIO_GPIO_0_EXTI_SUB_PRIORITY 2
+#define RADIO_GPIO_0_EXTI_IRQ_HANDLER EXTI1_IRQHandler
+
+#define RADIO_GPIO_1_PORT GPIOB
+#define RADIO_GPIO_1_PIN GPIO_PIN_0
+#define RADIO_GPIO_1_CLOCK_ENABLE() __GPIOB_CLK_ENABLE()
+#define RADIO_GPIO_1_CLOCK_DISABLE() __GPIOB_CLK_ENABLE()
+#define RADIO_GPIO_1_SPEED GPIO_SPEED_HIGH
+#define RADIO_GPIO_1_PUPD GPIO_NOPULL
+#define RADIO_GPIO_1_EXTI_LINE GPIO_PIN_0
+#define RADIO_GPIO_1_EXTI_MODE GPIO_MODE_IT_FALLING
+#define RADIO_GPIO_1_EXTI_IRQN EXTI0_IRQn
+#define RADIO_GPIO_1_EXTI_PREEMPTION_PRIORITY 2
+#define RADIO_GPIO_1_EXTI_SUB_PRIORITY 2
+#define RADIO_GPIO_1_EXTI_IRQ_HANDLER EXTI0_IRQHandler
+
+#define RADIO_GPIO_2_PORT GPIOA
+#define RADIO_GPIO_2_PIN GPIO_PIN_4
+#define RADIO_GPIO_2_CLOCK_ENABLE() __GPIOA_CLK_ENABLE()
+#define RADIO_GPIO_2_CLOCK_DISABLE() __GPIOA_CLK_ENABLE()
+#define RADIO_GPIO_2_SPEED GPIO_SPEED_HIGH
+#define RADIO_GPIO_2_PUPD GPIO_NOPULL
+#define RADIO_GPIO_2_EXTI_LINE GPIO_PIN_4
+#define RADIO_GPIO_2_EXTI_MODE GPIO_MODE_IT_FALLING
+#define RADIO_GPIO_2_EXTI_IRQN EXTI4_IRQn
+#define RADIO_GPIO_2_EXTI_PREEMPTION_PRIORITY 2
+#define RADIO_GPIO_2_EXTI_SUB_PRIORITY 2
+#define RADIO_GPIO_2_EXTI_IRQ_HANDLER EXTI4_IRQHandler
+
+
+#if defined (USE_SPIRIT1_DEFAULT)
+
+
+#define RADIO_GPIO_3_PORT GPIOC
+#define RADIO_GPIO_3_PIN GPIO_PIN_7
+#define RADIO_GPIO_3_CLOCK_ENABLE() __GPIOC_CLK_ENABLE()
+#define RADIO_GPIO_3_CLOCK_DISABLE() __GPIOC_CLK_DISABLE()
+#define RADIO_GPIO_3_SPEED GPIO_SPEED_HIGH
+#define RADIO_GPIO_3_PUPD GPIO_NOPULL
+#define RADIO_GPIO_3_EXTI_LINE GPIO_PIN_7
+#define RADIO_GPIO_3_EXTI_MODE GPIO_MODE_IT_FALLING
+#define RADIO_GPIO_3_EXTI_IRQN EXTI9_5_IRQn
+#define RADIO_GPIO_3_EXTI_PREEMPTION_PRIORITY 2
+#define RADIO_GPIO_3_EXTI_SUB_PRIORITY 2
+#define RADIO_GPIO_3_EXTI_IRQ_HANDLER EXTI9_5_IRQHandler
+
+#else
+
+#define RADIO_GPIO_3_PORT GPIOA
+#define RADIO_GPIO_3_PIN GPIO_PIN_0
+#define RADIO_GPIO_3_CLOCK_ENABLE() __GPIOA_CLK_ENABLE()
+#define RADIO_GPIO_3_CLOCK_DISABLE() __GPIOA_CLK_DISABLE()
+#define RADIO_GPIO_3_SPEED GPIO_SPEED_HIGH
+#define RADIO_GPIO_3_PUPD GPIO_NOPULL
+#define RADIO_GPIO_3_EXTI_LINE GPIO_PIN_0
+#define RADIO_GPIO_3_EXTI_MODE GPIO_MODE_IT_FALLING
+#define RADIO_GPIO_3_EXTI_IRQN EXTI0_IRQn
+#define RADIO_GPIO_3_EXTI_PREEMPTION_PRIORITY 2
+#define RADIO_GPIO_3_EXTI_SUB_PRIORITY 2
+#define RADIO_GPIO_3_EXTI_IRQ_HANDLER EXTI0_IRQHandler
+
+#endif
+
+#define RADIO_GPIO_SDN_PORT GPIOA
+#define RADIO_GPIO_SDN_PIN GPIO_PIN_10
+#define RADIO_GPIO_SDN_CLOCK_ENABLE() __GPIOA_CLK_ENABLE()
+#define RADIO_GPIO_SDN_CLOCK_DISABLE() __GPIOA_CLK_DISABLE()
+#define RADIO_GPIO_SDN_SPEED GPIO_SPEED_HIGH
+#define RADIO_GPIO_SDN_PUPD GPIO_PULLUP
+
+
+#define RADIO_GPIO_IRQ RADIO_GPIO_3
+#define SPIRIT_GPIO_IRQ SPIRIT_GPIO_3
+
+/* Exported Variables ------------------------------------------------------------*/
+
+
+/* Exported functions ------------------------------------------------------- */
+FlagStatus RadioGpioGetLevel(RadioGpioPin xGpio);
+void RadioGpioSetLevel(RadioGpioPin xGpio, GPIO_PinState xState);
+void SdkEvalEnterShutdown(void);
+void SdkEvalExitShutdown(void);
+SpiritFlagStatus SdkEvalCheckShutdown(void);
+void RadioGpioInit(RadioGpioPin xGpio, RadioGpioMode xGpioMode);
+void RadioGpioInterruptCmd(RadioGpioPin xGpio, uint8_t nPreemption, uint8_t nSubpriority, FunctionalState xNewState);
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__RADIO_GPIO_H */
+
+/**
+* @}
+*/
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/