Diff: easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Calibration.c

Revision:

0:f1d3878b8dd9

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/stm-spirit1-rf-driver/source/libs/spirit1/SPIRIT1_Library/Src/SPIRIT_Calibration.c	Sat Apr 08 14:45:51 2017 +0000
@@ -0,0 +1,491 @@
+/**
+  ******************************************************************************
+ * @file    SPIRIT_Calibration.c
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+ * @brief   Configuration and management of SPIRIT VCO-RCO calibration.
+ *
+  * @attention
+ *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "SPIRIT_Calibration.h"
+#include "MCU_Interface.h"
+
+
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @addtogroup SPIRIT_Calibration
+ * @{
+ */
+
+
+/**
+ * @defgroup Calibration_Private_TypesDefinitions       Calibration Private Types Definitions
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Calibration_Private_Defines                Calibration Private Defines
+ * @{
+ */
+
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Calibration_Private_Macros                 Calibration Private Macros
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Calibration_Private_Variables              Calibration Private Variables
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+
+/**
+ * @defgroup Calibration_Private_FunctionPrototypes     Calibration Private Function Prototypes
+ * @{
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ * @defgroup Calibration_Private_Functions              Calibration Private Functions
+ * @{
+ */
+
+/**
+ * @brief  Enables or Disables the RCO calibration.
+ * @param  xNewState new state for RCO calibration.
+           This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+void SpiritCalibrationRco(SpiritFunctionalState xNewState)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(PROTOCOL2_BASE, 1, &tempRegValue);
+
+  /* Build new value for the register */
+  if(xNewState==S_ENABLE)
+  {
+    tempRegValue |= PROTOCOL2_RCO_CALIBRATION_MASK;
+  }
+  else
+  {
+    tempRegValue &= ~PROTOCOL2_RCO_CALIBRATION_MASK;
+  }
+
+  /* Writes register to enable or disable the RCO calibration */
+  g_xStatus = SpiritSpiWriteRegisters(PROTOCOL2_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Enables or Disables the VCO calibration.
+ * @param  xNewState new state for VCO calibration.
+           This parameter can be S_ENABLE or S_DISABLE.
+ * @retval None.
+ */
+void SpiritCalibrationVco(SpiritFunctionalState xNewState)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_SPIRIT_FUNCTIONAL_STATE(xNewState));
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(PROTOCOL2_BASE, 1, &tempRegValue);
+
+   /* Build new value for the register */
+  if(xNewState==S_ENABLE)
+    tempRegValue |= PROTOCOL2_VCO_CALIBRATION_MASK;
+  else
+    tempRegValue &= ~PROTOCOL2_VCO_CALIBRATION_MASK;
+
+  /* Writes register to enable or disable the VCO calibration */
+  g_xStatus = SpiritSpiWriteRegisters(PROTOCOL2_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Sets the RCO calibration words.
+ * @param  cRwt RWT word for RCO calibration.
+ *         This parameter can be a value of uint8_t.
+ * @param  cRfb RFB word for RCO calibration.
+ *         This parameter can be a value of uint8_t.
+ * @retval None.
+ */
+void SpiritCalibrationSetRcoCalWords(uint8_t cRwt, uint8_t cRfb)
+{
+  uint8_t tempRegValue[2];
+
+  /* Build the value of RWT and the MSbits of the RFB word */
+  tempRegValue[0] = (cRwt << 4) | (cRfb >> 1);
+
+  /* Reads the register value to update the LSbit of RFB */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_IN1_BASE, 1, &tempRegValue[1]);
+
+  /* Build new value for the register */
+  tempRegValue[1] = (tempRegValue[1] & 0x7F) | (cRfb<<7);
+
+  /* Writes the new value for RCO calibration words */
+  g_xStatus = SpiritSpiWriteRegisters(RCO_VCO_CALIBR_IN2_BASE, 2, tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the RCO calibration words.
+ * @param  pcRwt pointer to the variable in which the RWT word has to be stored.
+ *         This parameter is a variable of uint8_t*.
+ * @param  pcRfb pointer to the variable in which the RFB word has to be stored.
+ *         This parameter is a variable of uint8_t*.
+ * @retval None.
+ */
+void SpiritCalibrationGetRcoCalWords(uint8_t* pcRwt, uint8_t* pcRfb)
+{
+  uint8_t tempRegValue[2];
+
+  /* Reads the registers values */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_OUT1_BASE, 2, tempRegValue);
+
+  /* Build the RWT value */
+  (*pcRwt) = tempRegValue[0] >> 4;
+  /* Build the RFB value */
+  (*pcRfb) = (tempRegValue[0] & 0x0F)<<1 | (tempRegValue[1]>>7);
+
+}
+
+
+/**
+ * @brief  Returns the VCO calibration data from internal VCO calibrator.
+ * @param  None.
+ * @retval uint8_t VCO calibration data word.
+ */
+uint8_t SpiritCalibrationGetVcoCalData(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_OUT0_BASE, 1, &tempRegValue);
+
+  /* Build and returns the VCO calibration data value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the VCO calibration data to be used in TX mode.
+ * @param  cVcoCalData calibration data word to be set.
+ *         This parameter is a variable of uint8_t.
+ * @retval None.
+ */
+void SpiritCalibrationSetVcoCalDataTx(uint8_t cVcoCalData)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_IN1_BASE, 1, &tempRegValue);
+
+  /* Build the value to be written */
+  tempRegValue &= 0x80;
+  tempRegValue |= cVcoCalData;
+
+  /* Writes the new value of calibration data in TX */
+  g_xStatus = SpiritSpiWriteRegisters(RCO_VCO_CALIBR_IN1_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the actual VCO calibration data used in TX mode.
+ * @param  None.
+ * @retval uint8_t Calibration data word used in TX mode.
+ */
+uint8_t SpiritCalibrationGetVcoCalDataTx(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register containing the calibration data word used in TX mode */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_IN1_BASE, 1, &tempRegValue);
+
+  /* Mask the VCO_CALIBR_TX field and returns the value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the VCO calibration data to be used in RX mode.
+ * @param  cVcoCalData calibration data word to be set.
+ *         This parameter is a variable of uint8_t.
+ * @retval None.
+ */
+void SpiritCalibrationSetVcoCalDataRx(uint8_t cVcoCalData)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_IN0_BASE, 1, &tempRegValue);
+
+  /* Build the value to be written */
+  tempRegValue &= 0x80;
+  tempRegValue |= cVcoCalData;
+
+  /* Writes the new value of calibration data in RX */
+  g_xStatus = SpiritSpiWriteRegisters(RCO_VCO_CALIBR_IN0_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the actual VCO calibration data used in RX mode.
+ * @param  None.
+ * @retval uint8_t Calibration data word used in RX mode.
+ */
+uint8_t SpiritCalibrationGetVcoCalDataRx(void)
+{
+  uint8_t tempRegValue;
+
+  /* Reads the register containing the calibration data word used in TX mode */
+  g_xStatus = SpiritSpiReadRegisters(RCO_VCO_CALIBR_IN0_BASE, 1, &tempRegValue);
+
+  /* Mask the VCO_CALIBR_RX field and returns the value */
+  return (tempRegValue & 0x7F);
+
+}
+
+
+/**
+ * @brief  Sets the VCO calibration window.
+ * @param  xRefWord value of REFWORD corresponding to the Ref_period according to the formula: CALIBRATION_WIN = 11*Ref_period/fxo.
+           This parameter can be a value of @ref VcoWin.
+ * @retval None.
+ */
+void SpiritCalibrationSetVcoWindow(VcoWin xRefWord)
+{
+  uint8_t tempRegValue;
+
+  /* Check the parameters */
+  s_assert_param(IS_VCO_WIN(xRefWord));
+
+  /* Reads the register value */
+  g_xStatus = SpiritSpiReadRegisters(SYNTH_CONFIG1_BASE, 1, &tempRegValue);
+
+  /* Build the values to be written */
+  tempRegValue &= 0xFC;
+  tempRegValue |= xRefWord;
+
+  /* Writes the new value of VCO calibration window */
+  g_xStatus = SpiritSpiWriteRegisters(SYNTH_CONFIG1_BASE, 1, &tempRegValue);
+
+}
+
+
+/**
+ * @brief  Returns the VCO calibration window.
+ * @param  None.
+ * @retval VcoWin Value of REFWORD corresponding to the Ref_period according to the formula: CALIBRATION_WIN = 11*Ref_period/fxo.
+ *         This parameter can be a value of @ref VcoWin.
+ */
+VcoWin SpiritCalibrationGetVcoWindow(void)
+{
+  uint8_t tempRegValue1, tempRegValue2;
+  VcoWin refWord;
+
+  /* Reads the register containing the REFWORD value */
+  g_xStatus = SpiritSpiReadRegisters(SYNTH_CONFIG1_BASE, 1, &tempRegValue1);
+
+  /* Reads the Xtal configuration */
+  g_xStatus = SpiritSpiReadRegisters(ANA_FUNC_CONF0_BASE, 1, &tempRegValue2);
+
+  /* Mask the REFWORD field */
+  tempRegValue1 &= 0x03;
+
+  /* Mask the 24_26_MHz_SELECT field */
+  tempRegValue2 = ((tempRegValue2 & 0x40)>>6);
+
+  /* In case of 26 MHz crystal */
+  if(tempRegValue2)
+  {
+    switch(tempRegValue1)
+    {
+    case 0:
+      refWord = CALIB_TIME_6_77_US_26MHZ;
+      break;
+    case 1:
+      refWord = CALIB_TIME_13_54_US_26MHZ;
+      break;
+    case 2:
+      refWord = CALIB_TIME_27_08_US_26MHZ;
+      break;
+    case 3:
+      refWord = CALIB_TIME_54_15_US_26MHZ;
+      break;
+    }
+  }
+
+  /* In case of 24 MHz crystal */
+  else
+  {
+    switch(tempRegValue1)
+    {
+    case 0:
+      refWord = CALIB_TIME_7_33_US_24MHZ;
+      break;
+    case 1:
+      refWord = CALIB_TIME_14_67_US_24MHZ;
+      break;
+    case 2:
+      refWord = CALIB_TIME_29_33_US_24MHZ;
+      break;
+    case 3:
+      refWord = CALIB_TIME_58_67_US_24MHZ;
+      break;
+    }
+  }
+
+  return refWord;
+
+}
+
+/**
+ * @brief  Selects a VCO.
+ * @param  xVco can be VCO_H or VCO_L according to which VCO select.
+ *         This parameter can be a value of @ref VcoSel.
+ * @retval None.
+ */
+void SpiritCalibrationSelectVco(VcoSel xVco)
+{
+  uint8_t tempRegValue;
+  
+  /* Check the parameter */
+  s_assert_param(IS_VCO_SEL(xVco));
+  
+  SpiritSpiReadRegisters(SYNTH_CONFIG1_BASE, 1, &tempRegValue);
+  
+  tempRegValue &= 0xF9;
+  
+  if(xVco == VCO_H)
+  {
+    tempRegValue |= 0x02;
+    
+  }
+  else
+  {
+    tempRegValue |= 0x04;
+  }
+  SpiritSpiWriteRegisters(SYNTH_CONFIG1_BASE, 1, &tempRegValue);  
+  
+}
+
+
+
+/**
+ * @brief  Returns the VCO selected.
+ * @param  void.
+ * @retval VCO_H or VCO_L according to which VCO selected.
+ *         This parameter can be a value of @ref VcoSel.
+ */
+VcoSel SpiritCalibrationGetVcoSelecttion(void)
+{
+  uint8_t tempRegValue;
+  
+  SpiritSpiReadRegisters(SYNTH_CONFIG1_BASE, 1, &tempRegValue);
+  
+  tempRegValue = (tempRegValue>>1)&0x3;
+  
+  if(tempRegValue == 0x01)
+  {
+    return VCO_H;
+    
+  }
+  else
+  {
+    return VCO_L;
+  }
+  
+}
+
+
+/**
+ *@}
+ */
+
+/**
+ *@}
+ */
+
+
+/**
+ *@}
+ */
+
+
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/