File content as of revision 0:a1734fe1ec4b:

 /**
  ******************************************************************************
  * @file    hw-config.h
  * @author  System LAB 
 * @version V1.0.0
 * @date    17-May-2015
  * @brief   Header file for Hardware Configuration & Setup
  ******************************************************************************
  * @attention
  *
 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
  *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
/*---------------------------------------------------------------------------*/
#ifndef __HW_CONFIG_H
#define __HW_CONFIG_H
/*---------------------------------------------------------------------------*/
#include "stm32l-spirit1-config.h"
/*---------------------------------------------------------------------------*/
#define UART_RxBufferSize    512
/*---------------------------------------------------------------------------*/    
#define I2Cx                            I2C1
#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
/*---------------------------------------------------------------------------*/
#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
/*---------------------------------------------------------------------------*/
/* Definition for I2Cx Pins */
#define I2Cx_SCL_PIN                    GPIO_PIN_8
#define I2Cx_SCL_GPIO_PORT              GPIOB
#define I2Cx_SDA_PIN                    GPIO_PIN_9
#define I2Cx_SDA_GPIO_PORT              GPIOB
#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1

/* Definition for I2Cx's NVIC */
#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler

  
#define I2Cx                            I2C1
#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 

#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()

/* Definition for I2Cx Pins */
#define I2Cx_SCL_PIN                    GPIO_PIN_8
#define I2Cx_SCL_GPIO_PORT              GPIOB
#define I2Cx_SDA_PIN                    GPIO_PIN_9
#define I2Cx_SDA_GPIO_PORT              GPIOB
#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1

/* Definition for I2Cx's NVIC */
#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler

/* User can use this section to tailor USARTx/UARTx instance used and associated
   resources */
/* Definition for USARTx clock resources */
#define USARTx                           USART2
#define USARTx_CLK_ENABLE()              __USART2_CLK_ENABLE();
#define DMAx_CLK_ENABLE()                __DMA1_CLK_ENABLE()
#define USARTx_RX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
#define USARTx_TX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()

#define USARTx_FORCE_RESET()             __USART2_FORCE_RESET()
#define USARTx_RELEASE_RESET()           __USART2_RELEASE_RESET()

/* Definition for USARTx Pins */
#define USARTx_TX_PIN                    GPIO_PIN_2
#define USARTx_TX_GPIO_PORT              GPIOA

#define USARTx_RX_PIN                    GPIO_PIN_3
#define USARTx_RX_GPIO_PORT              GPIOA

     /* Definition for USARTx's NVIC */
#define USARTx_IRQn                      USART2_IRQn
#define USARTx_IRQHandler                USART2_IRQHandler

#define USARTx_TX_AF                     GPIO_AF7_USART2 
#define USARTx_RX_AF                     GPIO_AF7_USART2


  /* Enable sensor mask */
#define PRESSURE_SENSOR                         0x00000001
#define TEMPERATURE_SENSOR                      0x00000002
#define HUMIDITY_SENSOR                         0x00000004
#define UV_SENSOR                               0x00000008  
#define ACCELEROMETER_SENSOR                    0x00000010  
#define GYROSCOPE_SENSOR                        0x00000020
#define MAGNETIC_SENSOR                         0x00000040      
/*---------------------------------------------------------------------------*/
#endif  /*__HW_CONFIG_H*/
/*---------------------------------------------------------------------------*/