Fork of my original MQTTGateway

Dependencies:   mbed-http

Revision:
0:a1734fe1ec4b
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/stm-spirit1-rf-driver/source/libs/Contiki_STM32_Library/hw-config.h	Sat Apr 08 14:43:14 2017 +0000
@@ -0,0 +1,125 @@
+ /**
+  ******************************************************************************
+  * @file    hw-config.h
+  * @author  System LAB 
+ * @version V1.0.0
+ * @date    17-May-2015
+  * @brief   Header file for Hardware Configuration & Setup
+  ******************************************************************************
+  * @attention
+  *
+ * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+  *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+/*---------------------------------------------------------------------------*/
+#ifndef __HW_CONFIG_H
+#define __HW_CONFIG_H
+/*---------------------------------------------------------------------------*/
+#include "stm32l-spirit1-config.h"
+/*---------------------------------------------------------------------------*/
+#define UART_RxBufferSize    512
+/*---------------------------------------------------------------------------*/    
+#define I2Cx                            I2C1
+#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
+#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
+#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
+/*---------------------------------------------------------------------------*/
+#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
+#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
+/*---------------------------------------------------------------------------*/
+/* Definition for I2Cx Pins */
+#define I2Cx_SCL_PIN                    GPIO_PIN_8
+#define I2Cx_SCL_GPIO_PORT              GPIOB
+#define I2Cx_SDA_PIN                    GPIO_PIN_9
+#define I2Cx_SDA_GPIO_PORT              GPIOB
+#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1
+
+/* Definition for I2Cx's NVIC */
+#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
+#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
+#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
+#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler
+
+  
+#define I2Cx                            I2C1
+#define I2Cx_CLK_ENABLE()               __I2C1_CLK_ENABLE()
+#define I2Cx_SDA_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE()
+#define I2Cx_SCL_GPIO_CLK_ENABLE()      __GPIOB_CLK_ENABLE() 
+
+#define I2Cx_FORCE_RESET()              __I2C1_FORCE_RESET()
+#define I2Cx_RELEASE_RESET()            __I2C1_RELEASE_RESET()
+
+/* Definition for I2Cx Pins */
+#define I2Cx_SCL_PIN                    GPIO_PIN_8
+#define I2Cx_SCL_GPIO_PORT              GPIOB
+#define I2Cx_SDA_PIN                    GPIO_PIN_9
+#define I2Cx_SDA_GPIO_PORT              GPIOB
+#define I2Cx_SCL_SDA_AF                 GPIO_AF4_I2C1
+
+/* Definition for I2Cx's NVIC */
+#define I2Cx_EV_IRQn                    I2C1_EV_IRQn
+#define I2Cx_ER_IRQn                    I2C1_ER_IRQn
+#define I2Cx_EV_IRQHandler              I2C1_EV_IRQHandler
+#define I2Cx_ER_IRQHandler              I2C1_ER_IRQHandler
+
+/* User can use this section to tailor USARTx/UARTx instance used and associated
+   resources */
+/* Definition for USARTx clock resources */
+#define USARTx                           USART2
+#define USARTx_CLK_ENABLE()              __USART2_CLK_ENABLE();
+#define DMAx_CLK_ENABLE()                __DMA1_CLK_ENABLE()
+#define USARTx_RX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
+#define USARTx_TX_GPIO_CLK_ENABLE()      __GPIOA_CLK_ENABLE()
+
+#define USARTx_FORCE_RESET()             __USART2_FORCE_RESET()
+#define USARTx_RELEASE_RESET()           __USART2_RELEASE_RESET()
+
+/* Definition for USARTx Pins */
+#define USARTx_TX_PIN                    GPIO_PIN_2
+#define USARTx_TX_GPIO_PORT              GPIOA
+
+#define USARTx_RX_PIN                    GPIO_PIN_3
+#define USARTx_RX_GPIO_PORT              GPIOA
+
+     /* Definition for USARTx's NVIC */
+#define USARTx_IRQn                      USART2_IRQn
+#define USARTx_IRQHandler                USART2_IRQHandler
+
+#define USARTx_TX_AF                     GPIO_AF7_USART2 
+#define USARTx_RX_AF                     GPIO_AF7_USART2
+
+
+  /* Enable sensor mask */
+#define PRESSURE_SENSOR                         0x00000001
+#define TEMPERATURE_SENSOR                      0x00000002
+#define HUMIDITY_SENSOR                         0x00000004
+#define UV_SENSOR                               0x00000008  
+#define ACCELEROMETER_SENSOR                    0x00000010  
+#define GYROSCOPE_SENSOR                        0x00000020
+#define MAGNETIC_SENSOR                         0x00000040      
+/*---------------------------------------------------------------------------*/
+#endif  /*__HW_CONFIG_H*/
+/*---------------------------------------------------------------------------*/