Diff: easy-connect/mcr20a-rf-driver/source/MCR20Drv.h

Revision:

0:a1734fe1ec4b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect/mcr20a-rf-driver/source/MCR20Drv.h	Sat Apr 08 14:43:14 2017 +0000
@@ -0,0 +1,372 @@
+/*!
+* Copyright (c) 2015, Freescale Semiconductor, Inc.
+* All rights reserved.
+*
+* \file MCR20Drv.h
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*
+* o Redistributions of source code must retain the above copyright notice, this list
+*   of conditions and the following disclaimer.
+*
+* o Redistributions in binary form must reproduce the above copyright notice, this
+*   list of conditions and the following disclaimer in the documentation and/or
+*   other materials provided with the distribution.
+*
+* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+*   contributors may be used to endorse or promote products derived from this
+*   software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __MCR20_DRV_H__
+#define __MCR20_DRV_H__
+
+
+/*****************************************************************************
+ *                               INCLUDED HEADERS                            *
+ *---------------------------------------------------------------------------*
+ * Add to this section all the headers that this module needs to include.    *
+ * Note that it is not a good practice to include header files into header   *
+ * files, so use this section only if there is no other better solution.     *
+ *---------------------------------------------------------------------------*
+ *****************************************************************************/
+
+/*****************************************************************************
+ *                             PRIVATE MACROS                                *
+ *---------------------------------------------------------------------------*
+ * Add to this section all the access macros, registers mappings, bit access *
+ * macros, masks, flags etc ...
+ *---------------------------------------------------------------------------*
+ *****************************************************************************/
+
+/* Disable XCVR clock output by default, to reduce power consumption */
+#ifndef gMCR20_ClkOutFreq_d 
+#define gMCR20_ClkOutFreq_d gCLK_OUT_FREQ_DISABLE
+#endif
+
+/*****************************************************************************
+ *                            PUBLIC FUNCTIONS                               *
+ *---------------------------------------------------------------------------*
+ * Add to this section all the global functions prototype preceded (as a     *
+ * good practice) by the keyword 'extern'                                    *
+ *---------------------------------------------------------------------------*
+ *****************************************************************************/
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_Init
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+extern void MCR20Drv_Init
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_SPI_DMA_Init
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_SPI_DMA_Init
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_Start_PB_DMA_SPI_Write
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_Start_PB_DMA_SPI_Write
+(
+  uint8_t * srcAddress,
+  uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_Start_PB_DMA_SPI_Read
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_Start_PB_DMA_SPI_Read
+(
+  uint8_t * dstAddress,
+  uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_DirectAccessSPIWrite
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_DirectAccessSPIWrite
+(
+ uint8_t address,
+ uint8_t value
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_DirectAccessSPIMultiByteWrite
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_DirectAccessSPIMultiByteWrite
+(
+ uint8_t startAddress,
+ uint8_t * byteArray,
+ uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_PB_SPIBurstWrite
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_PB_SPIBurstWrite
+(
+ uint8_t * byteArray,
+ uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_DirectAccessSPIRead
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+uint8_t MCR20Drv_DirectAccessSPIRead
+(
+ uint8_t address
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_DirectAccessSPIMultyByteRead
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+
+uint8_t MCR20Drv_DirectAccessSPIMultiByteRead
+(
+ uint8_t startAddress,
+ uint8_t * byteArray,
+ uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_PB_SPIByteWrite
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_PB_SPIByteWrite
+(
+ uint8_t address,
+ uint8_t value
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_PB_SPIBurstRead
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+uint8_t MCR20Drv_PB_SPIBurstRead
+(
+ uint8_t * byteArray,
+ uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IndirectAccessSPIWrite
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_IndirectAccessSPIWrite
+(
+ uint8_t address,
+ uint8_t value
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IndirectAccessSPIMultiByteWrite
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_IndirectAccessSPIMultiByteWrite
+(
+ uint8_t startAddress,
+ uint8_t * byteArray,
+ uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IndirectAccessSPIRead
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+uint8_t MCR20Drv_IndirectAccessSPIRead
+(
+ uint8_t address
+);
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IndirectAccessSPIMultiByteRead
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_IndirectAccessSPIMultiByteRead
+(
+ uint8_t startAddress,
+ uint8_t * byteArray,
+ uint8_t numOfBytes
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IsIrqPending
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+uint32_t MCR20Drv_IsIrqPending
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IRQ_Disable
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_IRQ_Disable
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_IRQ_Enable
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_IRQ_Enable
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_RST_PortConfig
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_RST_B_PortConfig
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_RST_Assert
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_RST_B_Assert
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_RST_Deassert
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_RST_B_Deassert
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_SoftRST_Assert
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_SoftRST_Assert
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_SoftRST_Deassert
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_SoftRST_Deassert
+(
+  void
+);
+
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_RESET
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_RESET
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_Soft_RESET
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_Soft_RESET
+(
+  void
+);
+
+/*---------------------------------------------------------------------------
+ * Name: MCR20Drv_Set_CLK_OUT_Freq
+ * Description: -
+ * Parameters: -
+ * Return: -
+ *---------------------------------------------------------------------------*/
+void MCR20Drv_Set_CLK_OUT_Freq
+(
+  uint8_t freqDiv
+);
+
+#define ProtectFromMCR20Interrupt()   MCR20Drv_IRQ_Disable()
+#define UnprotectFromMCR20Interrupt() MCR20Drv_IRQ_Enable()
+
+#endif /* __MCR20_DRV_H__ */