Adam Stepanek / Si4703

A mbed Port of 'Sparkfun Si4703 Arduino Library'.

Dependents:   projekt_Si4703

Fork of Si4703 by Moran Z.

SparkFun-Si4703.cpp@1:3d2b66e5d09e, 2015-08-07 (annotated)

Committer:
mzcs
Date:
Fri Aug 07 04:30:15 2015 +0000
Revision:
1:3d2b66e5d09e
Parent:
0:1f830fa5c9b8
Child:
2:558ef02f39d0
.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mzcs 1:3d2b66e5d09e 1 #include "mbed.h"
mzcs 1:3d2b66e5d09e 2 #include "SparkFun-Si4703.h"
mzcs 0:1f830fa5c9b8 3
mzcs 0:1f830fa5c9b8 4 Si4703_Breakout::Si4703_Breakout(PinName sdioPin, PinName sclkPin, PinName resetPin, Serial *pc)
mzcs 0:1f830fa5c9b8 5 {
mzcs 0:1f830fa5c9b8 6 _resetPin = resetPin;
mzcs 0:1f830fa5c9b8 7 _sdioPin = sdioPin;
mzcs 0:1f830fa5c9b8 8 _sclkPin = sclkPin;
mzcs 0:1f830fa5c9b8 9
mzcs 0:1f830fa5c9b8 10 this->pc = pc;
mzcs 0:1f830fa5c9b8 11 }
mzcs 0:1f830fa5c9b8 12
mzcs 0:1f830fa5c9b8 13 void Si4703_Breakout::powerOn()
mzcs 0:1f830fa5c9b8 14 {
mzcs 0:1f830fa5c9b8 15 si4703_init();
mzcs 0:1f830fa5c9b8 16 }
mzcs 0:1f830fa5c9b8 17
mzcs 0:1f830fa5c9b8 18 void Si4703_Breakout::powerOff()
mzcs 0:1f830fa5c9b8 19 {
mzcs 0:1f830fa5c9b8 20 // a Minimal Power-Down Sequence - According To SI AN230 (rev. 0.9), p.13 - Table 4
mzcs 0:1f830fa5c9b8 21
mzcs 0:1f830fa5c9b8 22 readRegisters();
mzcs 0:1f830fa5c9b8 23
mzcs 0:1f830fa5c9b8 24 si4703_registers[POWERCFG] &= ~(1<<DMUTE); // 'Enable Mute'
mzcs 0:1f830fa5c9b8 25 si4703_registers[POWERCFG] |= (1<<ENABLE); // 'Enable IC'
mzcs 0:1f830fa5c9b8 26 si4703_registers[POWERCFG] |= (1<<DISABLE); // & 'Disable IC'
mzcs 0:1f830fa5c9b8 27 // To Init. Power-Down Sequence
mzcs 0:1f830fa5c9b8 28
mzcs 0:1f830fa5c9b8 29 updateRegisters();
mzcs 0:1f830fa5c9b8 30 // Notice : This Does NOT Perform a Reset of The IC.
mzcs 0:1f830fa5c9b8 31 }
mzcs 0:1f830fa5c9b8 32
mzcs 0:1f830fa5c9b8 33 void Si4703_Breakout::setChannel(int channel)
mzcs 0:1f830fa5c9b8 34 {
mzcs 0:1f830fa5c9b8 35 uint8_t ack;
mzcs 0:1f830fa5c9b8 36 //Freq(MHz) = 0.1 (in Europe) * Channel + 87.5MHz
mzcs 0:1f830fa5c9b8 37 //97.3 = 0.1 * Chan + 87.5
mzcs 0:1f830fa5c9b8 38 //9.8 / 0.1 = 98
mzcs 0:1f830fa5c9b8 39 int newChannel = channel * 10; //973 * 10 = 9730
mzcs 0:1f830fa5c9b8 40 newChannel -= 8750; //9730 - 8750 = 980
mzcs 0:1f830fa5c9b8 41 newChannel /= 10; //980 / 10 = 98
mzcs 0:1f830fa5c9b8 42
mzcs 0:1f830fa5c9b8 43 //These steps come from AN230 page 20 rev 0.5
mzcs 0:1f830fa5c9b8 44 readRegisters();
mzcs 0:1f830fa5c9b8 45 si4703_registers[CHANNEL] &= 0xFE00; //Clear out the channel bits
mzcs 0:1f830fa5c9b8 46 si4703_registers[CHANNEL] |= newChannel; //Mask in the new channel
mzcs 0:1f830fa5c9b8 47 si4703_registers[CHANNEL] |= (1<<TUNE); //Set the TUNE bit to start
mzcs 0:1f830fa5c9b8 48 updateRegisters();
mzcs 0:1f830fa5c9b8 49
mzcs 0:1f830fa5c9b8 50 wait_ms(60); //Wait 60ms - you can use or skip this delay
mzcs 0:1f830fa5c9b8 51
mzcs 0:1f830fa5c9b8 52 //Poll to see if STC is set
mzcs 0:1f830fa5c9b8 53 while(1) {
mzcs 0:1f830fa5c9b8 54 ack = readRegisters();
mzcs 0:1f830fa5c9b8 55 wait_ms(1); // Just In Case...
mzcs 0:1f830fa5c9b8 56 if (( (si4703_registers[STATUSRSSI] & (1<<STC)) != 0) || (ack != SUCCESS)) break; //Tuning complete! (or FAILED)
mzcs 0:1f830fa5c9b8 57 }
mzcs 0:1f830fa5c9b8 58
mzcs 0:1f830fa5c9b8 59 readRegisters();
mzcs 0:1f830fa5c9b8 60 si4703_registers[CHANNEL] &= ~(1<<TUNE); //Clear the tune after a tune has completed
mzcs 0:1f830fa5c9b8 61 updateRegisters();
mzcs 0:1f830fa5c9b8 62
mzcs 0:1f830fa5c9b8 63 //Wait for the si4703 to clear the STC as well
mzcs 0:1f830fa5c9b8 64 while(1) {
mzcs 0:1f830fa5c9b8 65 ack = readRegisters();
mzcs 0:1f830fa5c9b8 66 wait_ms(1); // Just In Case...
mzcs 0:1f830fa5c9b8 67 if (( (si4703_registers[STATUSRSSI] & (1<<STC)) == 0) || (ack != SUCCESS)) break; //Tuning complete! (or FAILED)
mzcs 0:1f830fa5c9b8 68 }
mzcs 0:1f830fa5c9b8 69 }
mzcs 0:1f830fa5c9b8 70
mzcs 0:1f830fa5c9b8 71 int Si4703_Breakout::seekUp()
mzcs 0:1f830fa5c9b8 72 {
mzcs 0:1f830fa5c9b8 73 return seek(SEEK_UP);
mzcs 0:1f830fa5c9b8 74 }
mzcs 0:1f830fa5c9b8 75
mzcs 0:1f830fa5c9b8 76 int Si4703_Breakout::seekDown()
mzcs 0:1f830fa5c9b8 77 {
mzcs 0:1f830fa5c9b8 78 return seek(SEEK_DOWN);
mzcs 0:1f830fa5c9b8 79 }
mzcs 0:1f830fa5c9b8 80
mzcs 0:1f830fa5c9b8 81 void Si4703_Breakout::setVolume(int volume)
mzcs 0:1f830fa5c9b8 82 {
mzcs 0:1f830fa5c9b8 83 readRegisters(); //Read the current register set
mzcs 0:1f830fa5c9b8 84 if(volume < 0) volume = 0;
mzcs 0:1f830fa5c9b8 85 if (volume > 15) volume = 15;
mzcs 0:1f830fa5c9b8 86 si4703_registers[SYSCONFIG2] &= 0xFFF0; //Clear volume bits
mzcs 0:1f830fa5c9b8 87 si4703_registers[SYSCONFIG2] |= volume; //Set new volume
mzcs 0:1f830fa5c9b8 88 updateRegisters(); //Update
mzcs 0:1f830fa5c9b8 89 }
mzcs 0:1f830fa5c9b8 90
mzcs 0:1f830fa5c9b8 91 uint8_t Si4703_Breakout::getVolume()
mzcs 0:1f830fa5c9b8 92 {
mzcs 0:1f830fa5c9b8 93 readRegisters(); //Read the current register set
mzcs 0:1f830fa5c9b8 94
mzcs 0:1f830fa5c9b8 95 return (si4703_registers[SYSCONFIG2] & 0x000F);
mzcs 0:1f830fa5c9b8 96 }
mzcs 0:1f830fa5c9b8 97
mzcs 0:1f830fa5c9b8 98 /*
mzcs 0:1f830fa5c9b8 99 void Si4703_Breakout::readRDS(char* buffer, long timeout)
mzcs 0:1f830fa5c9b8 100 {
mzcs 0:1f830fa5c9b8 101 long endTime = millis() + timeout;
mzcs 0:1f830fa5c9b8 102 boolean completed[] = {false, false, false, false};
mzcs 0:1f830fa5c9b8 103 int completedCount = 0;
mzcs 0:1f830fa5c9b8 104 while(completedCount < 4 && millis() < endTime) {
mzcs 0:1f830fa5c9b8 105 readRegisters();
mzcs 0:1f830fa5c9b8 106 if(si4703_registers[STATUSRSSI] & (1<<RDSR)){
mzcs 0:1f830fa5c9b8 107 // ls 2 bits of B determine the 4 letter pairs
mzcs 0:1f830fa5c9b8 108 // once we have a full set return
mzcs 0:1f830fa5c9b8 109 // if you get nothing after 20 readings return with empty string
mzcs 0:1f830fa5c9b8 110 uint16_t b = si4703_registers[RDSB];
mzcs 0:1f830fa5c9b8 111 int index = b & 0x03;
mzcs 0:1f830fa5c9b8 112 if (! completed[index] && b < 500)
mzcs 0:1f830fa5c9b8 113 {
mzcs 0:1f830fa5c9b8 114 completed[index] = true;
mzcs 0:1f830fa5c9b8 115 completedCount ++;
mzcs 0:1f830fa5c9b8 116 char Dh = (si4703_registers[RDSD] & 0xFF00) >> 8;
mzcs 0:1f830fa5c9b8 117 char Dl = (si4703_registers[RDSD] & 0x00FF);
mzcs 0:1f830fa5c9b8 118 buffer[index * 2] = Dh;
mzcs 0:1f830fa5c9b8 119 buffer[index * 2 +1] = Dl;
mzcs 0:1f830fa5c9b8 120 // Serial.print(si4703_registers[RDSD]); Serial.print(" ");
mzcs 0:1f830fa5c9b8 121 // Serial.print(index);Serial.print(" ");
mzcs 0:1f830fa5c9b8 122 // Serial.write(Dh);
mzcs 0:1f830fa5c9b8 123 // Serial.write(Dl);
mzcs 0:1f830fa5c9b8 124 // Serial.println();
mzcs 0:1f830fa5c9b8 125 }
mzcs 0:1f830fa5c9b8 126 delay(40); //Wait for the RDS bit to clear
mzcs 0:1f830fa5c9b8 127 }
mzcs 0:1f830fa5c9b8 128 else {
mzcs 0:1f830fa5c9b8 129 delay(30); //From AN230, using the polling method 40ms should be sufficient amount of time between checks
mzcs 0:1f830fa5c9b8 130 }
mzcs 0:1f830fa5c9b8 131 }
mzcs 0:1f830fa5c9b8 132 if (millis() >= endTime) {
mzcs 0:1f830fa5c9b8 133 buffer[0] ='\0';
mzcs 0:1f830fa5c9b8 134 return;
mzcs 0:1f830fa5c9b8 135 }
mzcs 0:1f830fa5c9b8 136
mzcs 0:1f830fa5c9b8 137 buffer[8] = '\0';
mzcs 0:1f830fa5c9b8 138 }
mzcs 0:1f830fa5c9b8 139 */
mzcs 0:1f830fa5c9b8 140
mzcs 0:1f830fa5c9b8 141
mzcs 0:1f830fa5c9b8 142
mzcs 0:1f830fa5c9b8 143 //To get the Si4703 inito 2-wire mode, SEN needs to be high and SDIO needs to be low after a reset
mzcs 0:1f830fa5c9b8 144 //The breakout board has SEN pulled high, but also has SDIO pulled high. Therefore, after a normal power up
mzcs 0:1f830fa5c9b8 145 //The Si4703 will be in an unknown state. RST must be controlled
mzcs 0:1f830fa5c9b8 146 void Si4703_Breakout::si4703_init()
mzcs 0:1f830fa5c9b8 147 {
mzcs 0:1f830fa5c9b8 148 _reset_ = new DigitalOut(_resetPin);
mzcs 0:1f830fa5c9b8 149 _sdio_ = new DigitalOut(_sdioPin);
mzcs 0:1f830fa5c9b8 150
mzcs 0:1f830fa5c9b8 151 _sdio_->write(0); //A low SDIO indicates a 2-wire interface
mzcs 0:1f830fa5c9b8 152 _reset_->write(0); //Put Si4703 into reset
mzcs 0:1f830fa5c9b8 153 wait_ms(1); //Some delays while we allow pins to settle
mzcs 0:1f830fa5c9b8 154 _reset_->write(1); //Bring Si4703 out of reset with SDIO set to low and SEN pulled high with on-board resistor
mzcs 0:1f830fa5c9b8 155 wait_ms(1); //Allow Si4703 to come out of reset
mzcs 0:1f830fa5c9b8 156
mzcs 0:1f830fa5c9b8 157 //Now that the unit is reset and I2C inteface mode, we need to begin I2C
mzcs 0:1f830fa5c9b8 158 i2c_ = new I2C(_sdioPin, _sclkPin);
mzcs 0:1f830fa5c9b8 159 i2c_->frequency(100000);
mzcs 0:1f830fa5c9b8 160 ///
mzcs 0:1f830fa5c9b8 161
mzcs 0:1f830fa5c9b8 162 readRegisters(); //Read the current register set
mzcs 0:1f830fa5c9b8 163 si4703_registers[0x07] = 0x8100; //Enable the oscillator, from AN230 page 9, rev 0.61 (works)
mzcs 0:1f830fa5c9b8 164 updateRegisters(); //Update
mzcs 0:1f830fa5c9b8 165
mzcs 0:1f830fa5c9b8 166 wait_ms(500); //Wait for clock to settle - from AN230 page 9
mzcs 0:1f830fa5c9b8 167
mzcs 0:1f830fa5c9b8 168 readRegisters(); //Read the current register set
mzcs 0:1f830fa5c9b8 169 si4703_registers[POWERCFG] = 0x4001; //Enable the IC
mzcs 0:1f830fa5c9b8 170 // si4703_registers[POWERCFG] |= (1<<SMUTE) | (1<<DMUTE); //Disable Mute, disable softmute
mzcs 0:1f830fa5c9b8 171 si4703_registers[SYSCONFIG1] |= (1<<RDS); //Enable RDS
mzcs 0:1f830fa5c9b8 172
mzcs 0:1f830fa5c9b8 173 si4703_registers[SYSCONFIG1] |= (1<<DE); //50kHz Europe setup
mzcs 0:1f830fa5c9b8 174 si4703_registers[SYSCONFIG2] |= (1<<SPACE0); //100kHz channel spacing for Europe
mzcs 0:1f830fa5c9b8 175
mzcs 0:1f830fa5c9b8 176 si4703_registers[SYSCONFIG2] &= 0xFFF0; //Clear volume bits
mzcs 0:1f830fa5c9b8 177 si4703_registers[SYSCONFIG2] |= 0x0001; //Set volume to lowest
mzcs 0:1f830fa5c9b8 178 updateRegisters(); //Update
mzcs 0:1f830fa5c9b8 179
mzcs 0:1f830fa5c9b8 180 wait_ms(110); //Max powerup time, from datasheet page 13
mzcs 0:1f830fa5c9b8 181
mzcs 0:1f830fa5c9b8 182 }
mzcs 0:1f830fa5c9b8 183
mzcs 0:1f830fa5c9b8 184 //Read the entire register control set from 0x00 to 0x0F
mzcs 0:1f830fa5c9b8 185 uint8_t Si4703_Breakout::readRegisters(){
mzcs 0:1f830fa5c9b8 186
mzcs 0:1f830fa5c9b8 187 //Si4703 begins reading from register upper register of 0x0A and reads to 0x0F, then loops to 0x00.
mzcs 0:1f830fa5c9b8 188 // Wire.requestFrom(SI4703, 32); //We want to read the entire register set from 0x0A to 0x09 = 32 uint8_ts.
mzcs 0:1f830fa5c9b8 189 char data[32];
mzcs 0:1f830fa5c9b8 190 uint8_t ack = i2c_->read(SI4703, data, 32); //Read in these 32 uint8_ts
mzcs 0:1f830fa5c9b8 191
mzcs 0:1f830fa5c9b8 192 if (ack != 0) { //We have a problem!
mzcs 0:1f830fa5c9b8 193 return(FAIL);
mzcs 0:1f830fa5c9b8 194 }
mzcs 0:1f830fa5c9b8 195
mzcs 0:1f830fa5c9b8 196 //Remember, register 0x0A comes in first so we have to shuffle the array around a bit
mzcs 0:1f830fa5c9b8 197 for (int y=0; y<6; y++)
mzcs 0:1f830fa5c9b8 198 {
mzcs 0:1f830fa5c9b8 199 si4703_registers[0x0A+y] = 0;
mzcs 0:1f830fa5c9b8 200 si4703_registers[0x0A+y] = data[(y*2)+1];
mzcs 0:1f830fa5c9b8 201 si4703_registers[0x0A+y] |= (data[(y*2)] << 8);
mzcs 0:1f830fa5c9b8 202 }
mzcs 0:1f830fa5c9b8 203
mzcs 0:1f830fa5c9b8 204 for (int y=0; y<10; y++)
mzcs 0:1f830fa5c9b8 205 {
mzcs 0:1f830fa5c9b8 206 si4703_registers[y] = 0;
mzcs 0:1f830fa5c9b8 207 si4703_registers[y] = data[(12)+(y*2)+1];
mzcs 0:1f830fa5c9b8 208 si4703_registers[y] |= (data[(12)+(y*2)] << 8);
mzcs 0:1f830fa5c9b8 209 }
mzcs 0:1f830fa5c9b8 210 //We're done!
mzcs 0:1f830fa5c9b8 211 ///
mzcs 0:1f830fa5c9b8 212 return(SUCCESS);
mzcs 0:1f830fa5c9b8 213 }
mzcs 0:1f830fa5c9b8 214
mzcs 0:1f830fa5c9b8 215 //Write the current 9 control registers (0x02 to 0x07) to the Si4703
mzcs 0:1f830fa5c9b8 216 //It's a little weird, you don't write an I2C address
mzcs 0:1f830fa5c9b8 217 //The Si4703 assumes you are writing to 0x02 first, then increments
mzcs 0:1f830fa5c9b8 218 uint8_t Si4703_Breakout::updateRegisters() {
mzcs 0:1f830fa5c9b8 219
mzcs 0:1f830fa5c9b8 220 char data[12];
mzcs 0:1f830fa5c9b8 221
mzcs 0:1f830fa5c9b8 222 //First we send the 0x02 to 0x07 control registers
mzcs 0:1f830fa5c9b8 223 //In general, we should not write to registers 0x08 and 0x09
mzcs 0:1f830fa5c9b8 224 for(int regSpot = 0x02 ; regSpot < 0x08 ; regSpot++) {
mzcs 0:1f830fa5c9b8 225 data[(regSpot-2)*2] = si4703_registers[regSpot] >> 8;
mzcs 0:1f830fa5c9b8 226 data[((regSpot-2)*2)+1] = si4703_registers[regSpot] & 0x00FF;
mzcs 0:1f830fa5c9b8 227 }
mzcs 0:1f830fa5c9b8 228
mzcs 0:1f830fa5c9b8 229 uint8_t ack = i2c_->write(SI4703, data, 12); // a write command automatically begins with register 0x02 so no need to send a write-to address
mzcs 0:1f830fa5c9b8 230
mzcs 0:1f830fa5c9b8 231 if(ack != 0) { //We have a problem!
mzcs 0:1f830fa5c9b8 232 return(FAIL);
mzcs 0:1f830fa5c9b8 233 }
mzcs 0:1f830fa5c9b8 234
mzcs 0:1f830fa5c9b8 235 return(SUCCESS);
mzcs 0:1f830fa5c9b8 236 }
mzcs 0:1f830fa5c9b8 237
mzcs 0:1f830fa5c9b8 238 //Returns The Value of a Register
mzcs 0:1f830fa5c9b8 239 uint16_t Si4703_Breakout::getRegister(uint8_t regNum)
mzcs 0:1f830fa5c9b8 240 {
mzcs 0:1f830fa5c9b8 241 readRegisters();
mzcs 0:1f830fa5c9b8 242 return si4703_registers[regNum];
mzcs 0:1f830fa5c9b8 243 // No Error Status Checking
mzcs 0:1f830fa5c9b8 244 }
mzcs 0:1f830fa5c9b8 245
mzcs 0:1f830fa5c9b8 246 //Seeks out the next available station
mzcs 0:1f830fa5c9b8 247 //Returns the freq if it made it
mzcs 0:1f830fa5c9b8 248 //Returns zero if failed
mzcs 0:1f830fa5c9b8 249 int Si4703_Breakout::seek(bool seekDirection){
mzcs 0:1f830fa5c9b8 250 uint8_t ack;
mzcs 0:1f830fa5c9b8 251 readRegisters();
mzcs 0:1f830fa5c9b8 252 //Set seek mode wrap bit
mzcs 0:1f830fa5c9b8 253 si4703_registers[POWERCFG] |= (1<<SKMODE); //Allow wrap
mzcs 0:1f830fa5c9b8 254 //si4703_registers[POWERCFG] &= ~(1<<SKMODE); //Disallow wrap - if you disallow wrap, you may want to tune to 87.5 first
mzcs 0:1f830fa5c9b8 255 if(seekDirection == SEEK_DOWN) si4703_registers[POWERCFG] &= ~(1<<SEEKUP); //Seek down is the default upon reset
mzcs 0:1f830fa5c9b8 256 else si4703_registers[POWERCFG] |= 1<<SEEKUP; //Set the bit to seek up
mzcs 0:1f830fa5c9b8 257
mzcs 0:1f830fa5c9b8 258 si4703_registers[POWERCFG] |= (1<<SEEK); //Start seek
mzcs 0:1f830fa5c9b8 259 updateRegisters(); //Seeking will now start
mzcs 0:1f830fa5c9b8 260
mzcs 0:1f830fa5c9b8 261 //Poll to see if STC is set
mzcs 0:1f830fa5c9b8 262 while(1) {
mzcs 0:1f830fa5c9b8 263 ack = readRegisters();
mzcs 0:1f830fa5c9b8 264 wait_ms(1); // Just In Case...
mzcs 0:1f830fa5c9b8 265 if (((si4703_registers[STATUSRSSI] & (1<<STC)) != 0) || (ack != SUCCESS)) break; //Tuning complete! (or FAILED)
mzcs 0:1f830fa5c9b8 266 }
mzcs 0:1f830fa5c9b8 267
mzcs 0:1f830fa5c9b8 268 readRegisters();
mzcs 0:1f830fa5c9b8 269 int valueSFBL = si4703_registers[STATUSRSSI] & (1<<SFBL); //Store the value of SFBL
mzcs 0:1f830fa5c9b8 270 si4703_registers[POWERCFG] &= ~(1<<SEEK); //Clear the seek bit after seek has completed
mzcs 0:1f830fa5c9b8 271 updateRegisters();
mzcs 0:1f830fa5c9b8 272
mzcs 0:1f830fa5c9b8 273 //Wait for the si4703 to clear the STC as well
mzcs 0:1f830fa5c9b8 274 while(1) {
mzcs 0:1f830fa5c9b8 275 ack = readRegisters();
mzcs 0:1f830fa5c9b8 276 wait_ms(1); // Just In Case...
mzcs 0:1f830fa5c9b8 277 if (((si4703_registers[STATUSRSSI] & (1<<STC)) == 0) || (ack != SUCCESS)) break; //Tuning complete! (or FAILED)
mzcs 0:1f830fa5c9b8 278 }
mzcs 0:1f830fa5c9b8 279
mzcs 0:1f830fa5c9b8 280 if(valueSFBL) { //The bit was set indicating we hit a band limit or failed to find a station
mzcs 0:1f830fa5c9b8 281 return(0);
mzcs 0:1f830fa5c9b8 282 }
mzcs 0:1f830fa5c9b8 283 return getChannel();
mzcs 0:1f830fa5c9b8 284 }
mzcs 0:1f830fa5c9b8 285
mzcs 0:1f830fa5c9b8 286 //Reads the current channel from READCHAN
mzcs 0:1f830fa5c9b8 287 //Returns a number like 973 for 97.3MHz
mzcs 0:1f830fa5c9b8 288 int Si4703_Breakout::getChannel() {
mzcs 0:1f830fa5c9b8 289 readRegisters();
mzcs 0:1f830fa5c9b8 290 int channel = (si4703_registers[READCHAN] & 0x03FF); //Mask out everything but the lower 10 bits
mzcs 0:1f830fa5c9b8 291 //Freq(MHz) = 0.100(in Europe) * Channel + 87.5MHz
mzcs 0:1f830fa5c9b8 292 //X = 0.1 * Chan + 87.5
mzcs 0:1f830fa5c9b8 293 channel += 875; //98 + 875 = 973 ( for 97.3 MHz )
mzcs 0:1f830fa5c9b8 294 return(channel);
mzcs 0:1f830fa5c9b8 295 }
mzcs 0:1f830fa5c9b8 296
mzcs 0:1f830fa5c9b8 297 void Si4703_Breakout::printRegs() {
mzcs 0:1f830fa5c9b8 298 readRegisters();
mzcs 0:1f830fa5c9b8 299 for (int x=0; x<16; x++) { pc->printf("Reg# 0x%X = 0x%X\r\n",x,si4703_registers[x]); }
mzcs 0:1f830fa5c9b8 300 }