Varun Bahl / BahlDecrypModified

Updated

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@1078:79c089630b38, 2016-01-11 (annotated)

Committer:
vcoubard
Date:
Mon Jan 11 08:51:44 2016 +0000
Revision:
1078:79c089630b38
Parent:
1077:98d37e26903c
Child:
1115:82d4a8a56d91
Synchronized with git rev 4774e2cd

Author: Rohit Grover

Add an alias for BLEProtocol::AddressType::Type

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 716:11b41f651697 1 /* mbed Microcontroller Library
rgrover1 716:11b41f651697 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 716:11b41f651697 3 *
rgrover1 716:11b41f651697 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 716:11b41f651697 5 * you may not use this file except in compliance with the License.
rgrover1 716:11b41f651697 6 * You may obtain a copy of the License at
rgrover1 716:11b41f651697 7 *
rgrover1 716:11b41f651697 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 716:11b41f651697 9 *
rgrover1 716:11b41f651697 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 716:11b41f651697 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 716:11b41f651697 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 716:11b41f651697 13 * See the License for the specific language governing permissions and
rgrover1 716:11b41f651697 14 * limitations under the License.
rgrover1 716:11b41f651697 15 */
rgrover1 716:11b41f651697 16
rgrover1 716:11b41f651697 17 #ifndef __BLE_H__
rgrover1 716:11b41f651697 18 #define __BLE_H__
rgrover1 716:11b41f651697 19
rgrover1 716:11b41f651697 20 #include "blecommon.h"
rgrover1 716:11b41f651697 21 #include "Gap.h"
rgrover1 716:11b41f651697 22 #include "GattServer.h"
rgrover1 716:11b41f651697 23 #include "GattClient.h"
rgrover1 716:11b41f651697 24
rgrover1 886:0a45c67b2301 25 #include "ble/FunctionPointerWithContext.h"
rgrover1 886:0a45c67b2301 26
rgrover1 861:2afa79e3ed0a 27 #ifdef YOTTA_CFG_MBED_OS
rgrover1 861:2afa79e3ed0a 28 #include "mbed-drivers/mbed_error.h"
rgrover1 861:2afa79e3ed0a 29 #else
rgrover1 818:61c62a287194 30 #include "mbed_error.h"
rgrover1 861:2afa79e3ed0a 31 #endif
rgrover1 861:2afa79e3ed0a 32
vcoubard 1048:efb29faf12fc 33 /* Forward declaration for the implementation class */
rgrover1 861:2afa79e3ed0a 34 class BLEInstanceBase;
rgrover1 858:38a4963a455e 35
rgrover1 716:11b41f651697 36 /**
vcoubard 1048:efb29faf12fc 37 * The base class used to abstract away BLE-capable radio transceivers or SOCs,
vcoubard 1048:efb29faf12fc 38 * so that the BLE API can work with any radio transparently.
rgrover1 716:11b41f651697 39 */
rgrover1 716:11b41f651697 40 class BLE
rgrover1 716:11b41f651697 41 {
rgrover1 716:11b41f651697 42 public:
rgrover1 861:2afa79e3ed0a 43 typedef unsigned InstanceID_t; /** The type returned by BLE::getInstanceID(). */
rgrover1 861:2afa79e3ed0a 44
rgrover1 861:2afa79e3ed0a 45 /**
rgrover1 886:0a45c67b2301 46 * The context provided to init-completion-callbacks (see init() below).
rgrover1 886:0a45c67b2301 47 *
rgrover1 861:2afa79e3ed0a 48 * @param ble
rgrover1 861:2afa79e3ed0a 49 * A reference to the BLE instance being initialized.
rgrover1 861:2afa79e3ed0a 50 * @param error
vcoubard 1048:efb29faf12fc 51 * Captures the result of initialization. It is set to
rgrover1 861:2afa79e3ed0a 52 * BLE_ERROR_NONE if initialization completed successfully. Else
rgrover1 861:2afa79e3ed0a 53 * the error value is implementation specific.
rgrover1 861:2afa79e3ed0a 54 */
rgrover1 886:0a45c67b2301 55 struct InitializationCompleteCallbackContext {
vcoubard 1048:efb29faf12fc 56 BLE& ble; /* Reference to the BLE object that has been initialized */
vcoubard 1048:efb29faf12fc 57 ble_error_t error; /* Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
rgrover1 886:0a45c67b2301 58 };
rgrover1 886:0a45c67b2301 59
rgrover1 886:0a45c67b2301 60 /**
rgrover1 886:0a45c67b2301 61 * The signature for function-pointer like callbacks for initialization-completion.
rgrover1 886:0a45c67b2301 62 *
rgrover1 886:0a45c67b2301 63 * @note There are two versions of init(). In addition to the simple
rgrover1 886:0a45c67b2301 64 * function-pointer, init() can also take a <Object, member> tuple as its
rgrover1 886:0a45c67b2301 65 * callback target. In case of the latter, the following declaration doesn't apply.
rgrover1 886:0a45c67b2301 66 */
rgrover1 886:0a45c67b2301 67 typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
rgrover1 861:2afa79e3ed0a 68
rgrover1 716:11b41f651697 69 /**
rgrover1 716:11b41f651697 70 * Initialize the BLE controller. This should be called before using
rgrover1 716:11b41f651697 71 * anything else in the BLE_API.
rgrover1 716:11b41f651697 72 *
rgrover1 716:11b41f651697 73 * init() hands control to the underlying BLE module to accomplish
rgrover1 716:11b41f651697 74 * initialization. This initialization may tacitly depend on other hardware
vcoubard 1048:efb29faf12fc 75 * setup (such as clocks or power-modes) that happens early on during
vcoubard 1048:efb29faf12fc 76 * system startup. It may not be safe to call init() from a global static
vcoubard 1048:efb29faf12fc 77 * context where ordering is compiler-specific and can't be guaranteed - it
rgrover1 716:11b41f651697 78 * is safe to call BLE::init() from within main().
rgrover1 861:2afa79e3ed0a 79 *
rgrover1 886:0a45c67b2301 80 * @param initCompleteCallback
rgrover1 861:2afa79e3ed0a 81 * A callback for when initialization completes for a BLE
vcoubard 1048:efb29faf12fc 82 * instance. This is an optional parameter; if no callback is
vcoubard 1048:efb29faf12fc 83 * set up the application can still determine the status of
rgrover1 861:2afa79e3ed0a 84 * initialization using BLE::hasInitialized() (see below).
rgrover1 861:2afa79e3ed0a 85 *
rgrover1 861:2afa79e3ed0a 86 * @return BLE_ERROR_NONE if the initialization procedure was started
rgrover1 861:2afa79e3ed0a 87 * successfully.
rgrover1 861:2afa79e3ed0a 88 *
rgrover1 886:0a45c67b2301 89 * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
rgrover1 886:0a45c67b2301 90 * the initialization completion callback at some point.
rgrover1 886:0a45c67b2301 91 *
rgrover1 886:0a45c67b2301 92 * @note In some cases, initialization is instantaneous (or blocking); if
rgrover1 886:0a45c67b2301 93 * so, it is acceptable for the stack-specific implementation of init()
vcoubard 1048:efb29faf12fc 94 * to invoke the completion callback directly (within its own
vcoubard 1048:efb29faf12fc 95 * context).
rgrover1 861:2afa79e3ed0a 96 *
rgrover1 861:2afa79e3ed0a 97 * @note Nearly all BLE APIs would return
rgrover1 861:2afa79e3ed0a 98 * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
rgrover1 861:2afa79e3ed0a 99 * corresponding transport is initialized.
rgrover1 886:0a45c67b2301 100 *
rgrover1 886:0a45c67b2301 101 * @note There are two versions of init(). In addition to the simple
rgrover1 886:0a45c67b2301 102 * function-pointer, init() can also take an <Object, member> tuple as its
rgrover1 886:0a45c67b2301 103 * callback target.
rgrover1 716:11b41f651697 104 */
rgrover1 886:0a45c67b2301 105 ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
rgrover1 886:0a45c67b2301 106 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
rgrover1 887:fed45b77c90c 107 return initImplementation(callback);
rgrover1 886:0a45c67b2301 108 }
rgrover1 886:0a45c67b2301 109
rgrover1 886:0a45c67b2301 110 /**
rgrover1 886:0a45c67b2301 111 * An alternate declaration for init(). This one takes an <Object, member> tuple as its
rgrover1 886:0a45c67b2301 112 * callback target.
rgrover1 886:0a45c67b2301 113 */
rgrover1 886:0a45c67b2301 114 template<typename T>
rgrover1 886:0a45c67b2301 115 ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
rgrover1 886:0a45c67b2301 116 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
rgrover1 887:fed45b77c90c 117 return initImplementation(callback);
rgrover1 886:0a45c67b2301 118 }
rgrover1 874:0607a58418ce 119
rgrover1 874:0607a58418ce 120 /**
rgrover1 861:2afa79e3ed0a 121 * @return true if initialization has completed for the underlying BLE
rgrover1 861:2afa79e3ed0a 122 * transport.
rgrover1 861:2afa79e3ed0a 123 *
vcoubard 1048:efb29faf12fc 124 * The application can set up a callback to signal completion of
rgrover1 861:2afa79e3ed0a 125 * initialization when using init(). Otherwise, this method can be used to
rgrover1 861:2afa79e3ed0a 126 * poll the state of initialization.
rgrover1 861:2afa79e3ed0a 127 */
rgrover1 861:2afa79e3ed0a 128 bool hasInitialized(void) const;
rgrover1 716:11b41f651697 129
rgrover1 716:11b41f651697 130 /**
rgrover1 716:11b41f651697 131 * Purge the BLE stack of GATT and GAP state. init() must be called
rgrover1 716:11b41f651697 132 * afterwards to re-instate services and GAP state. This API offers a way to
rgrover1 716:11b41f651697 133 * repopulate the GATT database with new services and characteristics.
rgrover1 716:11b41f651697 134 */
rgrover1 861:2afa79e3ed0a 135 ble_error_t shutdown(void);
rgrover1 716:11b41f651697 136
rgrover1 716:11b41f651697 137 /**
rgrover1 716:11b41f651697 138 * This call allows the application to get the BLE stack version information.
rgrover1 716:11b41f651697 139 *
rgrover1 716:11b41f651697 140 * @return A pointer to a const string representing the version.
vcoubard 1048:efb29faf12fc 141 * Note: The string is owned by BLE_API.
rgrover1 716:11b41f651697 142 */
rgrover1 861:2afa79e3ed0a 143 const char *getVersion(void);
rgrover1 716:11b41f651697 144
rgrover1 716:11b41f651697 145 /*
rgrover1 716:11b41f651697 146 * Accessors to GAP. Please refer to Gap.h. All GAP related functionality requires
rgrover1 716:11b41f651697 147 * going through this accessor.
rgrover1 716:11b41f651697 148 */
rgrover1 861:2afa79e3ed0a 149 const Gap &gap() const;
rgrover1 861:2afa79e3ed0a 150 Gap &gap();
rgrover1 716:11b41f651697 151
rgrover1 716:11b41f651697 152 /*
rgrover1 716:11b41f651697 153 * Accessors to GATT Server. Please refer to GattServer.h. All GATTServer related
rgrover1 716:11b41f651697 154 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 155 */
rgrover1 861:2afa79e3ed0a 156 const GattServer& gattServer() const;
rgrover1 861:2afa79e3ed0a 157 GattServer& gattServer();
rgrover1 716:11b41f651697 158
rgrover1 716:11b41f651697 159 /*
rgrover1 716:11b41f651697 160 * Accessors to GATT Client. Please refer to GattClient.h. All GATTClient related
rgrover1 716:11b41f651697 161 * functionality requires going through this accessor.
rgrover1 716:11b41f651697 162 */
rgrover1 861:2afa79e3ed0a 163 const GattClient& gattClient() const;
rgrover1 861:2afa79e3ed0a 164 GattClient& gattClient();
rgrover1 716:11b41f651697 165
rgrover1 716:11b41f651697 166 /*
rgrover1 716:11b41f651697 167 * Accessors to Security Manager. Please refer to SecurityManager.h. All
rgrover1 716:11b41f651697 168 * SecurityManager related functionality requires going through this
rgrover1 716:11b41f651697 169 * accessor.
rgrover1 716:11b41f651697 170 */
rgrover1 861:2afa79e3ed0a 171 const SecurityManager& securityManager() const;
rgrover1 861:2afa79e3ed0a 172 SecurityManager& securityManager();
rgrover1 716:11b41f651697 173
rgrover1 716:11b41f651697 174 /**
rgrover1 716:11b41f651697 175 * Yield control to the BLE stack or to other tasks waiting for events. This
vcoubard 1048:efb29faf12fc 176 * is a sleep function that will return when there is an application-specific
vcoubard 1048:efb29faf12fc 177 * interrupt, but the MCU might wake up several times before
rgrover1 716:11b41f651697 178 * returning (to service the stack). This is not always interchangeable with
rgrover1 716:11b41f651697 179 * WFE().
rgrover1 716:11b41f651697 180 */
rgrover1 861:2afa79e3ed0a 181 void waitForEvent(void);
rgrover1 716:11b41f651697 182
rgrover1 822:a0f080d1e836 183 public:
rgrover1 822:a0f080d1e836 184 static const InstanceID_t DEFAULT_INSTANCE = 0;
rgrover1 822:a0f080d1e836 185 #ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
rgrover1 822:a0f080d1e836 186 static const InstanceID_t NUM_INSTANCES = 1;
rgrover1 822:a0f080d1e836 187 #else
rgrover1 822:a0f080d1e836 188 static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
rgrover1 822:a0f080d1e836 189 #endif
rgrover1 822:a0f080d1e836 190
rgrover1 822:a0f080d1e836 191 /**
rgrover1 822:a0f080d1e836 192 * Get a reference to the BLE singleton corresponding to a given interface.
rgrover1 822:a0f080d1e836 193 * There is a static array of BLE singletons.
rgrover1 822:a0f080d1e836 194 *
rgrover1 822:a0f080d1e836 195 * @Note: Calling Instance() is preferred over constructing a BLE object
rgrover1 822:a0f080d1e836 196 * directly, as it returns references to singletons.
rgrover1 822:a0f080d1e836 197 *
rgrover1 822:a0f080d1e836 198 * @param[in] id
vcoubard 1078:79c089630b38 199 * Instance-ID. This should be less than NUM_INSTANCES
rgrover1 822:a0f080d1e836 200 * for the returned BLE singleton to be useful.
rgrover1 822:a0f080d1e836 201 *
vcoubard 1048:efb29faf12fc 202 * @return a reference to a single object.
rgrover1 822:a0f080d1e836 203 */
rgrover1 822:a0f080d1e836 204 static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
rgrover1 822:a0f080d1e836 205
rgrover1 822:a0f080d1e836 206 /**
vcoubard 1048:efb29faf12fc 207 * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
vcoubard 1048:efb29faf12fc 208 * are thin wrappers around a transport object (that is, ptr. to
rgrover1 822:a0f080d1e836 209 * BLEInstanceBase).
rgrover1 822:a0f080d1e836 210 *
vcoubard 1048:efb29faf12fc 211 * It is better to create BLE objects as singletons accessed through the
rgrover1 822:a0f080d1e836 212 * Instance() method. If multiple BLE handles are constructed for the same
rgrover1 822:a0f080d1e836 213 * interface (using this constructor), they will share the same underlying
rgrover1 822:a0f080d1e836 214 * transport object.
rgrover1 822:a0f080d1e836 215 */
rgrover1 822:a0f080d1e836 216 BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
rgrover1 822:a0f080d1e836 217
rgrover1 861:2afa79e3ed0a 218 /**
rgrover1 861:2afa79e3ed0a 219 * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
rgrover1 861:2afa79e3ed0a 220 */
rgrover1 861:2afa79e3ed0a 221 InstanceID_t getInstanceID(void) const {
rgrover1 861:2afa79e3ed0a 222 return instanceID;
rgrover1 861:2afa79e3ed0a 223 }
rgrover1 822:a0f080d1e836 224
rgrover1 716:11b41f651697 225 /*
rgrover1 716:11b41f651697 226 * Deprecation alert!
rgrover1 716:11b41f651697 227 * All of the following are deprecated and may be dropped in a future
rgrover1 716:11b41f651697 228 * release. Documentation should refer to alternative APIs.
rgrover1 716:11b41f651697 229 */
rgrover1 716:11b41f651697 230
rgrover1 716:11b41f651697 231 /* GAP specific APIs. */
rgrover1 716:11b41f651697 232 public:
rgrover1 716:11b41f651697 233 /**
rgrover1 716:11b41f651697 234 * Set the BTLE MAC address and type.
rgrover1 716:11b41f651697 235 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 236 *
rgrover1 716:11b41f651697 237 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 238 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 239 * ble.setAddress(...) should be replaced with
rgrover1 716:11b41f651697 240 * ble.gap().setAddress(...).
rgrover1 716:11b41f651697 241 */
vcoubard 1078:79c089630b38 242 ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::Address_t address) {
rgrover1 716:11b41f651697 243 return gap().setAddress(type, address);
rgrover1 716:11b41f651697 244 }
rgrover1 716:11b41f651697 245
rgrover1 716:11b41f651697 246 /**
rgrover1 716:11b41f651697 247 * Fetch the BTLE MAC address and type.
rgrover1 716:11b41f651697 248 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 249 *
rgrover1 716:11b41f651697 250 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 251 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 252 * ble.getAddress(...) should be replaced with
rgrover1 716:11b41f651697 253 * ble.gap().getAddress(...).
rgrover1 716:11b41f651697 254 */
vcoubard 1078:79c089630b38 255 ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::Address_t address) {
rgrover1 716:11b41f651697 256 return gap().getAddress(typeP, address);
rgrover1 716:11b41f651697 257 }
rgrover1 716:11b41f651697 258
rgrover1 716:11b41f651697 259 /**
rgrover1 716:11b41f651697 260 * Set the GAP advertising mode to use for this device.
rgrover1 716:11b41f651697 261 *
rgrover1 716:11b41f651697 262 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 263 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 264 * ble.setAdvertisingType(...) should be replaced with
rgrover1 716:11b41f651697 265 * ble.gap().setAdvertisingType(...).
rgrover1 716:11b41f651697 266 */
rgrover1 716:11b41f651697 267 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
rgrover1 716:11b41f651697 268 gap().setAdvertisingType(advType);
rgrover1 716:11b41f651697 269 }
rgrover1 716:11b41f651697 270
rgrover1 716:11b41f651697 271 /**
rgrover1 716:11b41f651697 272 * @param[in] interval
rgrover1 716:11b41f651697 273 * Advertising interval in units of milliseconds. Advertising
rgrover1 716:11b41f651697 274 * is disabled if interval is 0. If interval is smaller than
rgrover1 716:11b41f651697 275 * the minimum supported value, then the minimum supported
rgrover1 716:11b41f651697 276 * value is used instead. This minimum value can be discovered
rgrover1 716:11b41f651697 277 * using getMinAdvertisingInterval().
rgrover1 716:11b41f651697 278 *
rgrover1 716:11b41f651697 279 * This field must be set to 0 if connectionMode is equal
rgrover1 716:11b41f651697 280 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 716:11b41f651697 281 *
vcoubard 1048:efb29faf12fc 282 * @note: Decreasing this value allows central devices to detect a
vcoubard 1048:efb29faf12fc 283 * peripheral faster, at the expense of more power being used by the radio
rgrover1 716:11b41f651697 284 * due to the higher data transmit rate.
rgrover1 716:11b41f651697 285 *
rgrover1 716:11b41f651697 286 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 287 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 288 * ble.setAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 289 * ble.gap().setAdvertisingInterval(...).
rgrover1 716:11b41f651697 290 *
rgrover1 716:11b41f651697 291 * @note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 716:11b41f651697 292 * 'interval' argument. That required an explicit conversion from
rgrover1 716:11b41f651697 293 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 716:11b41f651697 294 * no longer required as the new units are milliseconds. Any application
vcoubard 1048:efb29faf12fc 295 * code depending on the old semantics needs to be updated accordingly.
rgrover1 716:11b41f651697 296 */
rgrover1 716:11b41f651697 297 void setAdvertisingInterval(uint16_t interval) {
rgrover1 716:11b41f651697 298 gap().setAdvertisingInterval(interval);
rgrover1 716:11b41f651697 299 }
rgrover1 716:11b41f651697 300
rgrover1 716:11b41f651697 301 /**
rgrover1 716:11b41f651697 302 * @return Minimum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 303 *
rgrover1 716:11b41f651697 304 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 305 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 306 * ble.getMinAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 307 * ble.gap().getMinAdvertisingInterval(...).
rgrover1 716:11b41f651697 308 */
rgrover1 716:11b41f651697 309 uint16_t getMinAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 310 return gap().getMinAdvertisingInterval();
rgrover1 716:11b41f651697 311 }
rgrover1 716:11b41f651697 312
rgrover1 716:11b41f651697 313 /**
rgrover1 716:11b41f651697 314 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
rgrover1 716:11b41f651697 315 *
rgrover1 716:11b41f651697 316 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 317 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 318 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 319 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
rgrover1 716:11b41f651697 320 */
rgrover1 716:11b41f651697 321 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 322 return gap().getMinNonConnectableAdvertisingInterval();
rgrover1 716:11b41f651697 323 }
rgrover1 716:11b41f651697 324
rgrover1 716:11b41f651697 325 /**
rgrover1 716:11b41f651697 326 * @return Maximum Advertising interval in milliseconds.
rgrover1 716:11b41f651697 327 *
rgrover1 716:11b41f651697 328 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 329 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 330 * ble.getMaxAdvertisingInterval(...) should be replaced with
rgrover1 716:11b41f651697 331 * ble.gap().getMaxAdvertisingInterval(...).
rgrover1 716:11b41f651697 332 */
rgrover1 716:11b41f651697 333 uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 716:11b41f651697 334 return gap().getMaxAdvertisingInterval();
rgrover1 716:11b41f651697 335 }
rgrover1 716:11b41f651697 336
rgrover1 716:11b41f651697 337 /**
rgrover1 716:11b41f651697 338 * @param[in] timeout
rgrover1 716:11b41f651697 339 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 716:11b41f651697 340 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 716:11b41f651697 341 *
rgrover1 716:11b41f651697 342 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 343 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 344 * ble.setAdvertisingTimeout(...) should be replaced with
rgrover1 716:11b41f651697 345 * ble.gap().setAdvertisingTimeout(...).
rgrover1 716:11b41f651697 346 */
rgrover1 716:11b41f651697 347 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 348 gap().setAdvertisingTimeout(timeout);
rgrover1 716:11b41f651697 349 }
rgrover1 716:11b41f651697 350
rgrover1 716:11b41f651697 351 /**
vcoubard 1048:efb29faf12fc 352 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 716:11b41f651697 353 * the underlying stack. It would be uncommon for this API to be used
rgrover1 716:11b41f651697 354 * directly; there are other APIs to tweak advertisement parameters
rgrover1 716:11b41f651697 355 * individually (see above).
rgrover1 716:11b41f651697 356 *
rgrover1 716:11b41f651697 357 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 358 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 359 * ble.setAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 360 * ble.gap().setAdvertisingParams(...).
rgrover1 716:11b41f651697 361 */
rgrover1 716:11b41f651697 362 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
rgrover1 716:11b41f651697 363 gap().setAdvertisingParams(advParams);
rgrover1 716:11b41f651697 364 }
rgrover1 716:11b41f651697 365
rgrover1 716:11b41f651697 366 /**
rgrover1 716:11b41f651697 367 * @return Read back advertising parameters. Useful for storing and
rgrover1 716:11b41f651697 368 * restoring parameters rapidly.
rgrover1 716:11b41f651697 369 *
rgrover1 716:11b41f651697 370 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 371 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 372 * ble.getAdvertisingParams(...) should be replaced with
rgrover1 716:11b41f651697 373 * ble.gap().getAdvertisingParams(...).
rgrover1 716:11b41f651697 374 */
rgrover1 716:11b41f651697 375 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 716:11b41f651697 376 return gap().getAdvertisingParams();
rgrover1 716:11b41f651697 377 }
rgrover1 716:11b41f651697 378
rgrover1 716:11b41f651697 379 /**
rgrover1 716:11b41f651697 380 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 381 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 382 * as an additional 31 bytes if the advertising payload is too
rgrover1 716:11b41f651697 383 * small.
rgrover1 716:11b41f651697 384 *
rgrover1 716:11b41f651697 385 * @param[in] flags
vcoubard 1048:efb29faf12fc 386 * The flags to add. Please refer to
rgrover1 716:11b41f651697 387 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 716:11b41f651697 388 * flags may be specified in combination.
rgrover1 716:11b41f651697 389 *
rgrover1 716:11b41f651697 390 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 391 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 392 * ble.accumulateAdvertisingPayload(flags) should be replaced with
rgrover1 716:11b41f651697 393 * ble.gap().accumulateAdvertisingPayload(flags).
rgrover1 716:11b41f651697 394 */
rgrover1 716:11b41f651697 395 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 716:11b41f651697 396 return gap().accumulateAdvertisingPayload(flags);
rgrover1 716:11b41f651697 397 }
rgrover1 716:11b41f651697 398
rgrover1 716:11b41f651697 399 /**
rgrover1 716:11b41f651697 400 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 401 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 402 * as an additional 31 bytes if the advertising payload is too
rgrover1 716:11b41f651697 403 * small.
rgrover1 716:11b41f651697 404 *
rgrover1 716:11b41f651697 405 * @param[in] app
rgrover1 716:11b41f651697 406 * The appearance of the peripheral.
rgrover1 716:11b41f651697 407 *
rgrover1 716:11b41f651697 408 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 409 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 410 * ble.accumulateAdvertisingPayload(appearance) should be replaced with
rgrover1 716:11b41f651697 411 * ble.gap().accumulateAdvertisingPayload(appearance).
rgrover1 716:11b41f651697 412 */
rgrover1 716:11b41f651697 413 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 716:11b41f651697 414 return gap().accumulateAdvertisingPayload(app);
rgrover1 716:11b41f651697 415 }
rgrover1 716:11b41f651697 416
rgrover1 716:11b41f651697 417 /**
rgrover1 716:11b41f651697 418 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 716:11b41f651697 419 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 420 * as an additional 31 bytes if the advertising payload is too
rgrover1 716:11b41f651697 421 * small.
rgrover1 716:11b41f651697 422 *
rgrover1 716:11b41f651697 423 * @param[in] app
rgrover1 716:11b41f651697 424 * The max transmit power to be used by the controller. This
rgrover1 716:11b41f651697 425 * is only a hint.
rgrover1 716:11b41f651697 426 *
rgrover1 716:11b41f651697 427 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 428 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 429 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
rgrover1 716:11b41f651697 430 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
rgrover1 716:11b41f651697 431 */
rgrover1 716:11b41f651697 432 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 716:11b41f651697 433 return gap().accumulateAdvertisingPayloadTxPower(power);
rgrover1 716:11b41f651697 434 }
rgrover1 716:11b41f651697 435
rgrover1 716:11b41f651697 436 /**
rgrover1 716:11b41f651697 437 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 438 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 716:11b41f651697 439 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1048:efb29faf12fc 440 * advertising payload is too small.
rgrover1 716:11b41f651697 441 *
vcoubard 1048:efb29faf12fc 442 * @param type The type that describes the variable length data.
vcoubard 1048:efb29faf12fc 443 * @param data Data bytes.
vcoubard 1048:efb29faf12fc 444 * @param len Data length.
rgrover1 716:11b41f651697 445 *
rgrover1 716:11b41f651697 446 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 447 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 448 * ble.accumulateAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 449 * ble.gap().accumulateAdvertisingPayload(...).
rgrover1 716:11b41f651697 450 */
rgrover1 716:11b41f651697 451 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 452 return gap().accumulateAdvertisingPayload(type, data, len);
rgrover1 716:11b41f651697 453 }
rgrover1 716:11b41f651697 454
rgrover1 716:11b41f651697 455 /**
rgrover1 716:11b41f651697 456 * Setup a particular, user-constructed advertisement payload for the
rgrover1 716:11b41f651697 457 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 716:11b41f651697 458 * there are other APIs to build an advertisement payload (see above).
rgrover1 716:11b41f651697 459 *
rgrover1 716:11b41f651697 460 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 461 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 462 * ble.setAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 463 * ble.gap().setAdvertisingPayload(...).
rgrover1 716:11b41f651697 464 */
rgrover1 716:11b41f651697 465 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
rgrover1 716:11b41f651697 466 return gap().setAdvertisingPayload(advData);
rgrover1 716:11b41f651697 467 }
rgrover1 716:11b41f651697 468
rgrover1 716:11b41f651697 469 /**
rgrover1 716:11b41f651697 470 * @return Read back advertising data. Useful for storing and
rgrover1 716:11b41f651697 471 * restoring payload.
rgrover1 716:11b41f651697 472 *
rgrover1 716:11b41f651697 473 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 474 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 475 * ble.getAdvertisingData(...) should be replaced with
rgrover1 716:11b41f651697 476 * ble.gap().getAdvertisingPayload()(...).
rgrover1 716:11b41f651697 477 */
rgrover1 716:11b41f651697 478 const GapAdvertisingData &getAdvertisingData(void) const {
rgrover1 716:11b41f651697 479 return gap().getAdvertisingPayload();
rgrover1 716:11b41f651697 480 }
rgrover1 716:11b41f651697 481
rgrover1 716:11b41f651697 482 /**
rgrover1 716:11b41f651697 483 * Reset any advertising payload prepared from prior calls to
rgrover1 716:11b41f651697 484 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1048:efb29faf12fc 485 * initialized advertising payload to the underlying stack.
rgrover1 716:11b41f651697 486 *
rgrover1 716:11b41f651697 487 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 488 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 489 * ble.clearAdvertisingPayload(...) should be replaced with
rgrover1 716:11b41f651697 490 * ble.gap().clearAdvertisingPayload(...).
rgrover1 716:11b41f651697 491 */
rgrover1 716:11b41f651697 492 void clearAdvertisingPayload(void) {
rgrover1 716:11b41f651697 493 gap().clearAdvertisingPayload();
rgrover1 716:11b41f651697 494 }
rgrover1 716:11b41f651697 495
rgrover1 716:11b41f651697 496 /**
rgrover1 716:11b41f651697 497 * This API is *deprecated* and resolves to a no-operation. It is left here
rgrover1 716:11b41f651697 498 * to allow older code to compile. Please avoid using this API in new code.
rgrover1 716:11b41f651697 499 * This API will be dropped in a future release.
rgrover1 716:11b41f651697 500 *
rgrover1 716:11b41f651697 501 * Formerly, it would be used to dynamically reset the accumulated advertising
rgrover1 716:11b41f651697 502 * payload and scanResponse; to do this, the application would clear and re-
rgrover1 716:11b41f651697 503 * accumulate a new advertising payload (and scanResponse) before using this
rgrover1 716:11b41f651697 504 * API. Updates to the underlying advertisement payload now happen
rgrover1 716:11b41f651697 505 * implicitly.
rgrover1 716:11b41f651697 506 */
rgrover1 716:11b41f651697 507 ble_error_t setAdvertisingPayload(void) {
rgrover1 716:11b41f651697 508 return BLE_ERROR_NONE;
rgrover1 716:11b41f651697 509 }
rgrover1 716:11b41f651697 510
rgrover1 716:11b41f651697 511 /**
rgrover1 716:11b41f651697 512 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 716:11b41f651697 513 * scanResponse payload.
rgrover1 716:11b41f651697 514 *
vcoubard 1048:efb29faf12fc 515 * @param[in] type The type that describes the variable length data.
vcoubard 1048:efb29faf12fc 516 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 517 * @param[in] len Data length.
rgrover1 716:11b41f651697 518 *
rgrover1 716:11b41f651697 519 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 520 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 521 * ble.accumulateScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 522 * ble.gap().accumulateScanResponse(...).
rgrover1 716:11b41f651697 523 */
rgrover1 716:11b41f651697 524 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 716:11b41f651697 525 return gap().accumulateScanResponse(type, data, len);
rgrover1 716:11b41f651697 526 }
rgrover1 716:11b41f651697 527
rgrover1 716:11b41f651697 528 /**
rgrover1 716:11b41f651697 529 * Reset any scan response prepared from prior calls to
rgrover1 716:11b41f651697 530 * accumulateScanResponse().
rgrover1 716:11b41f651697 531 *
rgrover1 716:11b41f651697 532 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 533 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 534 * ble.clearScanResponse(...) should be replaced with
rgrover1 716:11b41f651697 535 * ble.gap().clearScanResponse(...).
rgrover1 716:11b41f651697 536 */
rgrover1 716:11b41f651697 537 void clearScanResponse(void) {
rgrover1 716:11b41f651697 538 gap().clearScanResponse();
rgrover1 716:11b41f651697 539 }
rgrover1 716:11b41f651697 540
rgrover1 716:11b41f651697 541 /**
rgrover1 716:11b41f651697 542 * Start advertising.
rgrover1 716:11b41f651697 543 *
rgrover1 716:11b41f651697 544 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 545 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 546 * ble.startAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 547 * ble.gap().startAdvertising(...).
rgrover1 716:11b41f651697 548 */
rgrover1 716:11b41f651697 549 ble_error_t startAdvertising(void) {
rgrover1 716:11b41f651697 550 return gap().startAdvertising();
rgrover1 716:11b41f651697 551 }
rgrover1 716:11b41f651697 552
rgrover1 716:11b41f651697 553 /**
rgrover1 716:11b41f651697 554 * Stop advertising.
rgrover1 716:11b41f651697 555 *
rgrover1 716:11b41f651697 556 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 557 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 558 * ble.stopAdvertising(...) should be replaced with
rgrover1 716:11b41f651697 559 * ble.gap().stopAdvertising(...).
rgrover1 716:11b41f651697 560 */
rgrover1 716:11b41f651697 561 ble_error_t stopAdvertising(void) {
rgrover1 716:11b41f651697 562 return gap().stopAdvertising();
rgrover1 716:11b41f651697 563 }
rgrover1 716:11b41f651697 564
rgrover1 716:11b41f651697 565 /**
vcoubard 1048:efb29faf12fc 566 * Set up parameters for GAP scanning (observer mode).
rgrover1 716:11b41f651697 567 * @param[in] interval
rgrover1 716:11b41f651697 568 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 569 * @param[in] window
rgrover1 716:11b41f651697 570 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 571 * @param[in] timeout
vcoubard 1048:efb29faf12fc 572 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
rgrover1 716:11b41f651697 573 * @param[in] activeScanning
rgrover1 716:11b41f651697 574 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 575 * scan response from a peer if possible.
rgrover1 716:11b41f651697 576 *
rgrover1 716:11b41f651697 577 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 578 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 579 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 580 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 581 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 582 * interval.
rgrover1 716:11b41f651697 583 *
rgrover1 716:11b41f651697 584 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 585 * enabled by using startScan().
rgrover1 716:11b41f651697 586 *
rgrover1 716:11b41f651697 587 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 588 *
rgrover1 716:11b41f651697 589 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 590 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 591 * ble.setScanParams(...) should be replaced with
rgrover1 716:11b41f651697 592 * ble.gap().setScanParams(...).
rgrover1 716:11b41f651697 593 */
rgrover1 716:11b41f651697 594 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 716:11b41f651697 595 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 716:11b41f651697 596 uint16_t timeout = 0,
rgrover1 716:11b41f651697 597 bool activeScanning = false) {
rgrover1 716:11b41f651697 598 return gap().setScanParams(interval, window, timeout, activeScanning);
rgrover1 716:11b41f651697 599 }
rgrover1 716:11b41f651697 600
rgrover1 716:11b41f651697 601 /**
vcoubard 1048:efb29faf12fc 602 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 716:11b41f651697 603 * @param[in] interval
rgrover1 716:11b41f651697 604 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 605 *
rgrover1 716:11b41f651697 606 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 607 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 608 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 609 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 610 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 611 * interval.
rgrover1 716:11b41f651697 612 *
rgrover1 716:11b41f651697 613 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 614 * enabled by using startScan().
rgrover1 716:11b41f651697 615 *
rgrover1 716:11b41f651697 616 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 617 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 618 * ble.setScanInterval(interval) should be replaced with
rgrover1 716:11b41f651697 619 * ble.gap().setScanInterval(interval).
rgrover1 716:11b41f651697 620 */
rgrover1 716:11b41f651697 621 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 716:11b41f651697 622 return gap().setScanInterval(interval);
rgrover1 716:11b41f651697 623 }
rgrover1 716:11b41f651697 624
rgrover1 716:11b41f651697 625 /**
vcoubard 1048:efb29faf12fc 626 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 716:11b41f651697 627 * @param[in] window
rgrover1 716:11b41f651697 628 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 716:11b41f651697 629 *
rgrover1 716:11b41f651697 630 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 631 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 632 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 633 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 634 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 635 * interval.
rgrover1 716:11b41f651697 636 *
rgrover1 716:11b41f651697 637 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 638 * enabled by using startScan().
rgrover1 716:11b41f651697 639 *
rgrover1 716:11b41f651697 640 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 641 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 642 * ble.setScanWindow(window) should be replaced with
rgrover1 716:11b41f651697 643 * ble.gap().setScanWindow(window).
rgrover1 716:11b41f651697 644 */
rgrover1 716:11b41f651697 645 ble_error_t setScanWindow(uint16_t window) {
rgrover1 716:11b41f651697 646 return gap().setScanWindow(window);
rgrover1 716:11b41f651697 647 }
rgrover1 716:11b41f651697 648
rgrover1 716:11b41f651697 649 /**
vcoubard 1048:efb29faf12fc 650 * Set up parameters for GAP scanning (observer mode).
rgrover1 716:11b41f651697 651 * @param[in] timeout
vcoubard 1048:efb29faf12fc 652 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
rgrover1 716:11b41f651697 653 *
rgrover1 716:11b41f651697 654 * The scanning window divided by the interval determines the duty cycle for
rgrover1 716:11b41f651697 655 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 716:11b41f651697 656 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 716:11b41f651697 657 * to have the interval and window set to the same value. In this case,
rgrover1 716:11b41f651697 658 * scanning is continuous, with a change of scanning frequency once every
rgrover1 716:11b41f651697 659 * interval.
rgrover1 716:11b41f651697 660 *
rgrover1 716:11b41f651697 661 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 662 * enabled by using startScan().
rgrover1 716:11b41f651697 663 *
rgrover1 716:11b41f651697 664 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 716:11b41f651697 665 *
rgrover1 716:11b41f651697 666 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 667 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 668 * ble.setScanTimeout(...) should be replaced with
rgrover1 716:11b41f651697 669 * ble.gap().setScanTimeout(...).
rgrover1 716:11b41f651697 670 */
rgrover1 716:11b41f651697 671 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 716:11b41f651697 672 return gap().setScanTimeout(timeout);
rgrover1 716:11b41f651697 673 }
rgrover1 716:11b41f651697 674
rgrover1 716:11b41f651697 675 /**
vcoubard 1048:efb29faf12fc 676 * Set up parameters for GAP scanning (observer mode).
rgrover1 716:11b41f651697 677 * @param[in] activeScanning
rgrover1 716:11b41f651697 678 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 716:11b41f651697 679 * scan response from a peer if possible.
rgrover1 716:11b41f651697 680 *
rgrover1 716:11b41f651697 681 * Once the scanning parameters have been configured, scanning can be
rgrover1 716:11b41f651697 682 * enabled by using startScan().
rgrover1 716:11b41f651697 683 *
rgrover1 716:11b41f651697 684 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 685 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 686 * ble.setActiveScan(...) should be replaced with
rgrover1 716:11b41f651697 687 * ble.gap().setActiveScanning(...).
rgrover1 716:11b41f651697 688 */
rgrover1 716:11b41f651697 689 void setActiveScan(bool activeScanning) {
rgrover1 716:11b41f651697 690 gap().setActiveScanning(activeScanning);
rgrover1 716:11b41f651697 691 }
rgrover1 716:11b41f651697 692
rgrover1 716:11b41f651697 693 /**
rgrover1 716:11b41f651697 694 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 716:11b41f651697 695 * effect.
rgrover1 716:11b41f651697 696 *
rgrover1 716:11b41f651697 697 * @param[in] callback
vcoubard 1048:efb29faf12fc 698 * The application-specific callback to be invoked upon
rgrover1 716:11b41f651697 699 * receiving every advertisement report. This can be passed in
rgrover1 716:11b41f651697 700 * as NULL, in which case scanning may not be enabled at all.
rgrover1 716:11b41f651697 701 *
rgrover1 716:11b41f651697 702 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 703 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 704 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 705 * ble.gap().startScan(callback).
rgrover1 716:11b41f651697 706 */
rgrover1 716:11b41f651697 707 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
rgrover1 716:11b41f651697 708 return gap().startScan(callback);
rgrover1 716:11b41f651697 709 }
rgrover1 716:11b41f651697 710
rgrover1 716:11b41f651697 711 /**
rgrover1 716:11b41f651697 712 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 716:11b41f651697 713 *
rgrover1 716:11b41f651697 714 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 715 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 716 * ble.startScan(callback) should be replaced with
rgrover1 716:11b41f651697 717 * ble.gap().startScan(object, callback).
rgrover1 716:11b41f651697 718 */
rgrover1 716:11b41f651697 719 template<typename T>
rgrover1 716:11b41f651697 720 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
rgrover1 716:11b41f651697 721
rgrover1 716:11b41f651697 722 /**
rgrover1 716:11b41f651697 723 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 716:11b41f651697 724 *
rgrover1 716:11b41f651697 725 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 716:11b41f651697 726 *
rgrover1 716:11b41f651697 727 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 728 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 729 * ble.stopScan() should be replaced with
rgrover1 716:11b41f651697 730 * ble.gap().stopScan().
rgrover1 716:11b41f651697 731 */
rgrover1 716:11b41f651697 732 ble_error_t stopScan(void) {
rgrover1 716:11b41f651697 733 return gap().stopScan();
rgrover1 716:11b41f651697 734 }
rgrover1 716:11b41f651697 735
rgrover1 716:11b41f651697 736 /**
rgrover1 716:11b41f651697 737 * Create a connection (GAP Link Establishment).
rgrover1 716:11b41f651697 738 * @param peerAddr
rgrover1 716:11b41f651697 739 * 48-bit address, LSB format.
rgrover1 716:11b41f651697 740 * @param peerAddrType
rgrover1 716:11b41f651697 741 * Address type of the peer.
rgrover1 716:11b41f651697 742 * @param connectionParams
rgrover1 716:11b41f651697 743 * Connection parameters.
rgrover1 716:11b41f651697 744 * @param scanParams
vcoubard 1048:efb29faf12fc 745 * Paramters to use while scanning for the peer.
rgrover1 716:11b41f651697 746 * @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard 1048:efb29faf12fc 747 * successfully. The onConnection callback (if set) is invoked upon
rgrover1 716:11b41f651697 748 * a connection event.
rgrover1 716:11b41f651697 749 *
rgrover1 716:11b41f651697 750 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 751 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 752 * ble.connect(...) should be replaced with
rgrover1 716:11b41f651697 753 * ble.gap().connect(...).
rgrover1 716:11b41f651697 754 */
vcoubard 1078:79c089630b38 755 ble_error_t connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1078:79c089630b38 756 BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
rgrover1 716:11b41f651697 757 const Gap::ConnectionParams_t *connectionParams = NULL,
rgrover1 716:11b41f651697 758 const GapScanningParams *scanParams = NULL) {
rgrover1 716:11b41f651697 759 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
rgrover1 716:11b41f651697 760 }
rgrover1 716:11b41f651697 761
rgrover1 716:11b41f651697 762 /**
vcoubard 1048:efb29faf12fc 763 * This call initiates the disconnection procedure, and its completion is
vcoubard 1048:efb29faf12fc 764 * communicated to the application with an invocation of the
rgrover1 716:11b41f651697 765 * onDisconnection callback.
rgrover1 716:11b41f651697 766 *
rgrover1 716:11b41f651697 767 * @param[in] connectionHandle
rgrover1 716:11b41f651697 768 * @param[in] reason
vcoubard 1048:efb29faf12fc 769 * The reason for disconnection; sent back to the peer.
rgrover1 716:11b41f651697 770 */
rgrover1 716:11b41f651697 771 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 772 return gap().disconnect(connectionHandle, reason);
rgrover1 716:11b41f651697 773 }
rgrover1 716:11b41f651697 774
rgrover1 716:11b41f651697 775 /**
vcoubard 1078:79c089630b38 776 * This call initiates the disconnection procedure, and its completion
vcoubard 1048:efb29faf12fc 777 * is communicated to the application with an invocation of the
rgrover1 716:11b41f651697 778 * onDisconnection callback.
rgrover1 716:11b41f651697 779 *
rgrover1 716:11b41f651697 780 * @param reason
vcoubard 1048:efb29faf12fc 781 * The reason for disconnection; sent back to the peer.
rgrover1 716:11b41f651697 782 *
rgrover1 716:11b41f651697 783 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 784 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 785 * ble.disconnect(reason) should be replaced with
rgrover1 716:11b41f651697 786 * ble.gap().disconnect(reason).
rgrover1 716:11b41f651697 787 *
vcoubard 1048:efb29faf12fc 788 * @note: This version of disconnect() doesn't take a connection handle. It
vcoubard 1048:efb29faf12fc 789 * works reliably only for stacks that are limited to a single
rgrover1 716:11b41f651697 790 * connection. This API should be considered *deprecated* in favour of the
vcoubard 1048:efb29faf12fc 791 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 716:11b41f651697 792 */
rgrover1 716:11b41f651697 793 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
rgrover1 716:11b41f651697 794 return gap().disconnect(reason);
rgrover1 716:11b41f651697 795 }
rgrover1 716:11b41f651697 796
rgrover1 716:11b41f651697 797 /**
vcoubard 1048:efb29faf12fc 798 * Returns the current GAP state of the device using a bitmask that
vcoubard 1048:efb29faf12fc 799 * describes whether the device is advertising or connected.
rgrover1 716:11b41f651697 800 *
rgrover1 716:11b41f651697 801 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 802 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 803 * ble.getGapState() should be replaced with
rgrover1 716:11b41f651697 804 * ble.gap().getState().
rgrover1 716:11b41f651697 805 */
rgrover1 716:11b41f651697 806 Gap::GapState_t getGapState(void) const {
rgrover1 716:11b41f651697 807 return gap().getState();
rgrover1 716:11b41f651697 808 }
rgrover1 716:11b41f651697 809
rgrover1 716:11b41f651697 810 /**
vcoubard 1048:efb29faf12fc 811 * Get the GAP peripheral's preferred connection parameters. These are the
rgrover1 716:11b41f651697 812 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 813 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 814 *
rgrover1 716:11b41f651697 815 * @param[out] params
rgrover1 716:11b41f651697 816 * The structure where the parameters will be stored. Memory
rgrover1 716:11b41f651697 817 * for this is owned by the caller.
rgrover1 716:11b41f651697 818 *
rgrover1 716:11b41f651697 819 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 716:11b41f651697 820 * the given structure pointed to by params.
rgrover1 716:11b41f651697 821 *
rgrover1 716:11b41f651697 822 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 823 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 824 * ble.getPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 825 * ble.gap().getPreferredConnectionParams().
rgrover1 716:11b41f651697 826 */
rgrover1 716:11b41f651697 827 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 828 return gap().getPreferredConnectionParams(params);
rgrover1 716:11b41f651697 829 }
rgrover1 716:11b41f651697 830
rgrover1 716:11b41f651697 831 /**
vcoubard 1048:efb29faf12fc 832 * Set the GAP peripheral's preferred connection parameters. These are the
rgrover1 716:11b41f651697 833 * defaults that the peripheral would like to have in a connection. The
rgrover1 716:11b41f651697 834 * choice of the connection parameters is eventually up to the central.
rgrover1 716:11b41f651697 835 *
rgrover1 716:11b41f651697 836 * @param[in] params
rgrover1 716:11b41f651697 837 * The structure containing the desired parameters.
rgrover1 716:11b41f651697 838 *
rgrover1 716:11b41f651697 839 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 840 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 841 * ble.setPreferredConnectionParams() should be replaced with
rgrover1 716:11b41f651697 842 * ble.gap().setPreferredConnectionParams().
rgrover1 716:11b41f651697 843 */
rgrover1 716:11b41f651697 844 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 845 return gap().setPreferredConnectionParams(params);
rgrover1 716:11b41f651697 846 }
rgrover1 716:11b41f651697 847
rgrover1 716:11b41f651697 848 /**
rgrover1 716:11b41f651697 849 * Update connection parameters while in the peripheral role.
rgrover1 716:11b41f651697 850 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
rgrover1 716:11b41f651697 851 * the central to perform the procedure.
rgrover1 716:11b41f651697 852 * @param[in] handle
rgrover1 716:11b41f651697 853 * Connection Handle
rgrover1 716:11b41f651697 854 * @param[in] params
rgrover1 716:11b41f651697 855 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 716:11b41f651697 856 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 716:11b41f651697 857 *
rgrover1 716:11b41f651697 858 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 859 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 860 * ble.updateConnectionParams() should be replaced with
rgrover1 716:11b41f651697 861 * ble.gap().updateConnectionParams().
rgrover1 716:11b41f651697 862 */
rgrover1 716:11b41f651697 863 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
rgrover1 716:11b41f651697 864 return gap().updateConnectionParams(handle, params);
rgrover1 716:11b41f651697 865 }
rgrover1 716:11b41f651697 866
rgrover1 716:11b41f651697 867 /**
rgrover1 716:11b41f651697 868 * Set the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 869 * @param[in] deviceName
rgrover1 716:11b41f651697 870 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 716:11b41f651697 871 *
rgrover1 716:11b41f651697 872 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 873 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 874 * ble.setDeviceName() should be replaced with
rgrover1 716:11b41f651697 875 * ble.gap().setDeviceName().
rgrover1 716:11b41f651697 876 */
rgrover1 716:11b41f651697 877 ble_error_t setDeviceName(const uint8_t *deviceName) {
rgrover1 716:11b41f651697 878 return gap().setDeviceName(deviceName);
rgrover1 716:11b41f651697 879 }
rgrover1 716:11b41f651697 880
rgrover1 716:11b41f651697 881 /**
rgrover1 716:11b41f651697 882 * Get the value of the device name characteristic in the GAP service.
rgrover1 716:11b41f651697 883 * @param[out] deviceName
rgrover1 716:11b41f651697 884 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 716:11b41f651697 885 * terminated* string will be placed. Set this
rgrover1 716:11b41f651697 886 * value to NULL in order to obtain the deviceName-length
rgrover1 716:11b41f651697 887 * from the 'length' parameter.
rgrover1 716:11b41f651697 888 *
rgrover1 716:11b41f651697 889 * @param[in/out] lengthP
rgrover1 716:11b41f651697 890 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 716:11b41f651697 891 * (on output) the complete device name length (without the
rgrover1 716:11b41f651697 892 * null terminator).
rgrover1 716:11b41f651697 893 *
rgrover1 716:11b41f651697 894 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 716:11b41f651697 895 * length will return the complete device name length, and not the
rgrover1 716:11b41f651697 896 * number of bytes actually returned in deviceName. The application may
rgrover1 716:11b41f651697 897 * use this information to retry with a suitable buffer size.
rgrover1 716:11b41f651697 898 *
rgrover1 716:11b41f651697 899 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 900 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 901 * ble.getDeviceName() should be replaced with
rgrover1 716:11b41f651697 902 * ble.gap().getDeviceName().
rgrover1 716:11b41f651697 903 */
rgrover1 716:11b41f651697 904 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 716:11b41f651697 905 return gap().getDeviceName(deviceName, lengthP);
rgrover1 716:11b41f651697 906 }
rgrover1 716:11b41f651697 907
rgrover1 716:11b41f651697 908 /**
rgrover1 716:11b41f651697 909 * Set the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 910 * @param[in] appearance
rgrover1 716:11b41f651697 911 * The new value for the device-appearance.
rgrover1 716:11b41f651697 912 *
rgrover1 716:11b41f651697 913 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 914 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 915 * ble.setAppearance() should be replaced with
rgrover1 716:11b41f651697 916 * ble.gap().setAppearance().
rgrover1 716:11b41f651697 917 */
rgrover1 716:11b41f651697 918 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
rgrover1 716:11b41f651697 919 return gap().setAppearance(appearance);
rgrover1 716:11b41f651697 920 }
rgrover1 716:11b41f651697 921
rgrover1 716:11b41f651697 922 /**
rgrover1 716:11b41f651697 923 * Get the appearance characteristic in the GAP service.
rgrover1 716:11b41f651697 924 * @param[out] appearance
rgrover1 716:11b41f651697 925 * The new value for the device-appearance.
rgrover1 716:11b41f651697 926 *
rgrover1 716:11b41f651697 927 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 928 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 929 * ble.getAppearance() should be replaced with
rgrover1 716:11b41f651697 930 * ble.gap().getAppearance().
rgrover1 716:11b41f651697 931 */
rgrover1 716:11b41f651697 932 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
rgrover1 716:11b41f651697 933 return gap().getAppearance(appearanceP);
rgrover1 716:11b41f651697 934 }
rgrover1 716:11b41f651697 935
rgrover1 716:11b41f651697 936 /**
rgrover1 716:11b41f651697 937 * Set the radio's transmit power.
rgrover1 716:11b41f651697 938 * @param[in] txPower Radio transmit power in dBm.
rgrover1 716:11b41f651697 939 *
rgrover1 716:11b41f651697 940 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 941 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 942 * ble.setTxPower() should be replaced with
rgrover1 716:11b41f651697 943 * ble.gap().setTxPower().
rgrover1 716:11b41f651697 944 */
rgrover1 716:11b41f651697 945 ble_error_t setTxPower(int8_t txPower) {
rgrover1 716:11b41f651697 946 return gap().setTxPower(txPower);
rgrover1 716:11b41f651697 947 }
rgrover1 716:11b41f651697 948
rgrover1 716:11b41f651697 949 /**
rgrover1 716:11b41f651697 950 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 716:11b41f651697 951 *
rgrover1 716:11b41f651697 952 * @param[out] valueArrayPP
rgrover1 716:11b41f651697 953 * Out parameter to receive the immutable array of Tx values.
rgrover1 716:11b41f651697 954 * @param[out] countP
rgrover1 716:11b41f651697 955 * Out parameter to receive the array's size.
rgrover1 716:11b41f651697 956 *
rgrover1 716:11b41f651697 957 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 958 * You should use the parallel API from Gap directly. A former call to
rgrover1 716:11b41f651697 959 * ble.getPermittedTxPowerValues() should be replaced with
rgrover1 716:11b41f651697 960 * ble.gap().getPermittedTxPowerValues().
rgrover1 716:11b41f651697 961 */
rgrover1 716:11b41f651697 962 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
rgrover1 716:11b41f651697 963 gap().getPermittedTxPowerValues(valueArrayPP, countP);
rgrover1 716:11b41f651697 964 }
rgrover1 716:11b41f651697 965
rgrover1 716:11b41f651697 966 /**
rgrover1 716:11b41f651697 967 * Add a service declaration to the local server ATT table. Also add the
rgrover1 716:11b41f651697 968 * characteristics contained within.
rgrover1 716:11b41f651697 969 *
rgrover1 716:11b41f651697 970 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 971 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 972 * to ble.addService() should be replaced with
rgrover1 716:11b41f651697 973 * ble.gattServer().addService().
rgrover1 716:11b41f651697 974 */
rgrover1 716:11b41f651697 975 ble_error_t addService(GattService &service) {
rgrover1 716:11b41f651697 976 return gattServer().addService(service);
rgrover1 716:11b41f651697 977 }
rgrover1 716:11b41f651697 978
rgrover1 716:11b41f651697 979 /**
vcoubard 1048:efb29faf12fc 980 * Read the value of a characteristic from the local GattServer.
rgrover1 716:11b41f651697 981 * @param[in] attributeHandle
rgrover1 716:11b41f651697 982 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 983 * @param[out] buffer
rgrover1 716:11b41f651697 984 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 985 * @param[in/out] lengthP
rgrover1 716:11b41f651697 986 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 987 * value is longer than the size of the supplied buffer,
vcoubard 1048:efb29faf12fc 988 * this variable will return the total attribute value length
rgrover1 716:11b41f651697 989 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 990 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 991 *
rgrover1 716:11b41f651697 992 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 993 *
rgrover1 716:11b41f651697 994 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 995 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 996 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 997 * ble.gattServer().read().
rgrover1 716:11b41f651697 998 */
rgrover1 716:11b41f651697 999 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 1000 return gattServer().read(attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 1001 }
rgrover1 716:11b41f651697 1002
rgrover1 716:11b41f651697 1003 /**
vcoubard 1048:efb29faf12fc 1004 * Read the value of a characteristic from the local GattServer.
rgrover1 716:11b41f651697 1005 * @param[in] connectionHandle
rgrover1 716:11b41f651697 1006 * Connection Handle.
rgrover1 716:11b41f651697 1007 * @param[in] attributeHandle
rgrover1 716:11b41f651697 1008 * Attribute handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 1009 * @param[out] buffer
rgrover1 716:11b41f651697 1010 * A buffer to hold the value being read.
rgrover1 716:11b41f651697 1011 * @param[in/out] lengthP
rgrover1 716:11b41f651697 1012 * Length of the buffer being supplied. If the attribute
rgrover1 716:11b41f651697 1013 * value is longer than the size of the supplied buffer,
vcoubard 1048:efb29faf12fc 1014 * this variable will return the total attribute value length
rgrover1 716:11b41f651697 1015 * (excluding offset). The application may use this
rgrover1 716:11b41f651697 1016 * information to allocate a suitable buffer size.
rgrover1 716:11b41f651697 1017 *
rgrover1 716:11b41f651697 1018 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
rgrover1 716:11b41f651697 1019 *
vcoubard 1048:efb29faf12fc 1020 * @note This API is a version of the above, with an additional connection handle
rgrover1 716:11b41f651697 1021 * parameter to allow fetches for connection-specific multivalued
rgrover1 733:718a3566b4ce 1022 * attributes (such as the CCCDs).
rgrover1 716:11b41f651697 1023 *
rgrover1 716:11b41f651697 1024 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1025 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1026 * to ble.readCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1027 * ble.gattServer().read().
rgrover1 716:11b41f651697 1028 */
rgrover1 716:11b41f651697 1029 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
rgrover1 716:11b41f651697 1030 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
rgrover1 716:11b41f651697 1031 }
rgrover1 716:11b41f651697 1032
rgrover1 716:11b41f651697 1033 /**
rgrover1 716:11b41f651697 1034 * Update the value of a characteristic on the local GattServer.
rgrover1 716:11b41f651697 1035 *
rgrover1 716:11b41f651697 1036 * @param[in] attributeHandle
vcoubard 1048:efb29faf12fc 1037 * Handle for the value attribute of the characteristic.
rgrover1 716:11b41f651697 1038 * @param[in] value
vcoubard 1048:efb29faf12fc 1039 * A pointer to a buffer holding the new value.
rgrover1 716:11b41f651697 1040 * @param[in] size
rgrover1 716:11b41f651697 1041 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 1042 * @param[in] localOnly
rgrover1 716:11b41f651697 1043 * Should this update be kept on the local
rgrover1 716:11b41f651697 1044 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 1045 * notify/indicate flag in the CCCD for this
vcoubard 1048:efb29faf12fc 1046 * characteristic? If set to true, no notification
rgrover1 716:11b41f651697 1047 * or indication is generated.
rgrover1 716:11b41f651697 1048 *
rgrover1 716:11b41f651697 1049 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 1050 *
rgrover1 716:11b41f651697 1051 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1052 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1053 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1054 * ble.gattServer().write().
rgrover1 716:11b41f651697 1055 */
rgrover1 716:11b41f651697 1056 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 1057 const uint8_t *value,
rgrover1 716:11b41f651697 1058 uint16_t size,
rgrover1 716:11b41f651697 1059 bool localOnly = false) {
rgrover1 716:11b41f651697 1060 return gattServer().write(attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 1061 }
rgrover1 716:11b41f651697 1062
rgrover1 716:11b41f651697 1063 /**
rgrover1 716:11b41f651697 1064 * Update the value of a characteristic on the local GattServer. A version
vcoubard 1048:efb29faf12fc 1065 * of the above, with a connection handle parameter to allow updates
rgrover1 733:718a3566b4ce 1066 * for connection-specific multivalued attributes (such as the CCCDs).
rgrover1 716:11b41f651697 1067 *
rgrover1 716:11b41f651697 1068 * @param[in] connectionHandle
rgrover1 716:11b41f651697 1069 * Connection Handle.
rgrover1 716:11b41f651697 1070 * @param[in] attributeHandle
rgrover1 716:11b41f651697 1071 * Handle for the value attribute of the Characteristic.
rgrover1 716:11b41f651697 1072 * @param[in] value
vcoubard 1048:efb29faf12fc 1073 * A pointer to a buffer holding the new value.
rgrover1 716:11b41f651697 1074 * @param[in] size
rgrover1 716:11b41f651697 1075 * Size of the new value (in bytes).
rgrover1 716:11b41f651697 1076 * @param[in] localOnly
rgrover1 716:11b41f651697 1077 * Should this update be kept on the local
rgrover1 716:11b41f651697 1078 * GattServer regardless of the state of the
rgrover1 716:11b41f651697 1079 * notify/indicate flag in the CCCD for this
rgrover1 716:11b41f651697 1080 * Characteristic? If set to true, no notification
rgrover1 716:11b41f651697 1081 * or indication is generated.
rgrover1 716:11b41f651697 1082 *
rgrover1 716:11b41f651697 1083 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
rgrover1 716:11b41f651697 1084 *
rgrover1 716:11b41f651697 1085 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1086 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1087 * to ble.updateCharacteristicValue() should be replaced with
rgrover1 716:11b41f651697 1088 * ble.gattServer().write().
rgrover1 716:11b41f651697 1089 */
rgrover1 716:11b41f651697 1090 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
rgrover1 716:11b41f651697 1091 GattAttribute::Handle_t attributeHandle,
rgrover1 716:11b41f651697 1092 const uint8_t *value,
rgrover1 716:11b41f651697 1093 uint16_t size,
rgrover1 716:11b41f651697 1094 bool localOnly = false) {
rgrover1 716:11b41f651697 1095 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
rgrover1 716:11b41f651697 1096 }
rgrover1 716:11b41f651697 1097
rgrover1 716:11b41f651697 1098 /**
rgrover1 716:11b41f651697 1099 * Enable the BLE stack's Security Manager. The Security Manager implements
vcoubard 1048:efb29faf12fc 1100 * the cryptographic algorithms and protocol exchanges that allow two
rgrover1 716:11b41f651697 1101 * devices to securely exchange data and privately detect each other.
rgrover1 716:11b41f651697 1102 * Calling this API is a prerequisite for encryption and pairing (bonding).
rgrover1 716:11b41f651697 1103 *
rgrover1 716:11b41f651697 1104 * @param[in] enableBonding Allow for bonding.
vcoubard 1048:efb29faf12fc 1105 * @param[in] requireMITM Require protection against man-in-the-middle attacks.
vcoubard 1048:efb29faf12fc 1106 * @param[in] iocaps To specify the I/O capabilities of this peripheral,
vcoubard 1048:efb29faf12fc 1107 * such as availability of a display or keyboard, to
rgrover1 716:11b41f651697 1108 * support out-of-band exchanges of security data.
rgrover1 716:11b41f651697 1109 * @param[in] passkey To specify a static passkey.
rgrover1 716:11b41f651697 1110 *
rgrover1 716:11b41f651697 1111 * @return BLE_ERROR_NONE on success.
rgrover1 716:11b41f651697 1112 *
rgrover1 716:11b41f651697 1113 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1114 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1115 * call to ble.initializeSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1116 * ble.securityManager().init(...).
rgrover1 716:11b41f651697 1117 */
rgrover1 716:11b41f651697 1118 ble_error_t initializeSecurity(bool enableBonding = true,
rgrover1 716:11b41f651697 1119 bool requireMITM = true,
rgrover1 716:11b41f651697 1120 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
rgrover1 716:11b41f651697 1121 const SecurityManager::Passkey_t passkey = NULL) {
rgrover1 716:11b41f651697 1122 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
rgrover1 716:11b41f651697 1123 }
rgrover1 716:11b41f651697 1124
rgrover1 716:11b41f651697 1125 /**
rgrover1 716:11b41f651697 1126 * Get the security status of a connection.
rgrover1 716:11b41f651697 1127 *
rgrover1 716:11b41f651697 1128 * @param[in] connectionHandle Handle to identify the connection.
vcoubard 1048:efb29faf12fc 1129 * @param[out] securityStatusP Security status.
rgrover1 716:11b41f651697 1130 *
vcoubard 1048:efb29faf12fc 1131 * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
rgrover1 716:11b41f651697 1132 *
rgrover1 716:11b41f651697 1133 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1134 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1135 * call to ble.getLinkSecurity(...) should be replaced with
rgrover1 716:11b41f651697 1136 * ble.securityManager().getLinkSecurity(...).
rgrover1 716:11b41f651697 1137 */
rgrover1 716:11b41f651697 1138 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
rgrover1 716:11b41f651697 1139 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
rgrover1 716:11b41f651697 1140 }
rgrover1 716:11b41f651697 1141
rgrover1 716:11b41f651697 1142 /**
rgrover1 716:11b41f651697 1143 * Delete all peer device context and all related bonding information from
rgrover1 716:11b41f651697 1144 * the database within the security manager.
rgrover1 716:11b41f651697 1145 *
vcoubard 1048:efb29faf12fc 1146 * @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
vcoubard 1048:efb29faf12fc 1147 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
rgrover1 716:11b41f651697 1148 * application registration.
rgrover1 716:11b41f651697 1149 *
rgrover1 716:11b41f651697 1150 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1151 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1152 * call to ble.purgeAllBondingState() should be replaced with
rgrover1 716:11b41f651697 1153 * ble.securityManager().purgeAllBondingState().
rgrover1 716:11b41f651697 1154 */
rgrover1 716:11b41f651697 1155 ble_error_t purgeAllBondingState(void) {
rgrover1 716:11b41f651697 1156 return securityManager().purgeAllBondingState();
rgrover1 716:11b41f651697 1157 }
rgrover1 716:11b41f651697 1158
rgrover1 716:11b41f651697 1159 /**
vcoubard 1048:efb29faf12fc 1160 * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
rgrover1 716:11b41f651697 1161 * possible event types.
rgrover1 716:11b41f651697 1162 *
rgrover1 716:11b41f651697 1163 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1164 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1165 * to ble.onTimeout(callback) should be replaced with
rgrover1 716:11b41f651697 1166 * ble.gap().onTimeout(callback).
rgrover1 716:11b41f651697 1167 */
rgrover1 716:11b41f651697 1168 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
rgrover1 716:11b41f651697 1169 gap().onTimeout(timeoutCallback);
rgrover1 716:11b41f651697 1170 }
rgrover1 716:11b41f651697 1171
rgrover1 716:11b41f651697 1172 /**
vcoubard 1048:efb29faf12fc 1173 * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
rgrover1 716:11b41f651697 1174 *
rgrover1 716:11b41f651697 1175 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1176 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1177 * to ble.onConnection(callback) should be replaced with
rgrover1 716:11b41f651697 1178 * ble.gap().onConnection(callback).
rgrover1 716:11b41f651697 1179 */
rgrover1 716:11b41f651697 1180 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
rgrover1 716:11b41f651697 1181 gap().onConnection(connectionCallback);
rgrover1 716:11b41f651697 1182 }
rgrover1 716:11b41f651697 1183
rgrover1 716:11b41f651697 1184 /**
rgrover1 829:9072de50087b 1185 * Append to a chain of callbacks to be invoked upon GAP disconnection.
rgrover1 716:11b41f651697 1186 *
rgrover1 716:11b41f651697 1187 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1188 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1189 * to ble.onDisconnection(callback) should be replaced with
rgrover1 716:11b41f651697 1190 * ble.gap().onDisconnection(callback).
rgrover1 716:11b41f651697 1191 */
rgrover1 716:11b41f651697 1192 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
rgrover1 716:11b41f651697 1193 gap().onDisconnection(disconnectionCallback);
rgrover1 716:11b41f651697 1194 }
rgrover1 716:11b41f651697 1195
rgrover1 716:11b41f651697 1196 template<typename T>
rgrover1 829:9072de50087b 1197 void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
rgrover1 829:9072de50087b 1198 gap().onDisconnection(tptr, mptr);
rgrover1 716:11b41f651697 1199 }
rgrover1 716:11b41f651697 1200
rgrover1 716:11b41f651697 1201 /**
rgrover1 716:11b41f651697 1202 * Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard 1048:efb29faf12fc 1203 * (nACTIVE) signals from the stack. These notify the application when the
rgrover1 716:11b41f651697 1204 * radio is in use. The signal is sent using software interrupt.
rgrover1 716:11b41f651697 1205 *
vcoubard 1048:efb29faf12fc 1206 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 1207 * signal is sent at the end of the radio event. These signals can be used
rgrover1 716:11b41f651697 1208 * by the application programmer to synchronize application logic with radio
rgrover1 716:11b41f651697 1209 * activity. For example, the ACTIVE signal can be used to shut off external
rgrover1 716:11b41f651697 1210 * devices to manage peak current drawn during periods when the radio is on,
vcoubard 1048:efb29faf12fc 1211 * or to trigger sensor data collection for transmission in the radio event.
rgrover1 716:11b41f651697 1212 *
rgrover1 716:11b41f651697 1213 * @param callback
rgrover1 716:11b41f651697 1214 * The application handler to be invoked in response to a radio
rgrover1 716:11b41f651697 1215 * ACTIVE/INACTIVE event.
rgrover1 716:11b41f651697 1216 *
rgrover1 716:11b41f651697 1217 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 751:868b6dd7a6bf 1218 * You should use the parallel API from Gap directly. A former call
rgrover1 716:11b41f651697 1219 * to ble.onRadioNotification(...) should be replaced with
rgrover1 716:11b41f651697 1220 * ble.gap().onRadioNotification(...).
rgrover1 716:11b41f651697 1221 */
rgrover1 752:424c2ae44553 1222 void onRadioNotification(void (*callback)(bool)) {
rgrover1 716:11b41f651697 1223 gap().onRadioNotification(callback);
rgrover1 716:11b41f651697 1224 }
rgrover1 716:11b41f651697 1225
rgrover1 716:11b41f651697 1226 /**
rgrover1 716:11b41f651697 1227 * Add a callback for the GATT event DATA_SENT (which is triggered when
rgrover1 716:11b41f651697 1228 * updates are sent out by GATT in the form of notifications).
rgrover1 716:11b41f651697 1229 *
vcoubard 1048:efb29faf12fc 1230 * @Note: It is possible to chain together multiple onDataSent callbacks
rgrover1 716:11b41f651697 1231 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1232 * to characteristics.
rgrover1 716:11b41f651697 1233 *
vcoubard 1048:efb29faf12fc 1234 * @Note: It is also possible to set up a callback into a member function of
rgrover1 716:11b41f651697 1235 * some object.
rgrover1 716:11b41f651697 1236 *
rgrover1 716:11b41f651697 1237 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1238 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1239 * to ble.onDataSent(...) should be replaced with
rgrover1 716:11b41f651697 1240 * ble.gattServer().onDataSent(...).
rgrover1 716:11b41f651697 1241 */
rgrover1 716:11b41f651697 1242 void onDataSent(void (*callback)(unsigned count)) {
rgrover1 716:11b41f651697 1243 gattServer().onDataSent(callback);
rgrover1 716:11b41f651697 1244 }
rgrover1 716:11b41f651697 1245 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
rgrover1 716:11b41f651697 1246 gattServer().onDataSent(objPtr, memberPtr);
rgrover1 716:11b41f651697 1247 }
rgrover1 716:11b41f651697 1248
rgrover1 716:11b41f651697 1249 /**
vcoubard 1048:efb29faf12fc 1250 * Set up a callback for when an attribute has its value updated by or at the
vcoubard 1048:efb29faf12fc 1251 * connected peer. For a peripheral, this callback is triggered when the local
rgrover1 716:11b41f651697 1252 * GATT server has an attribute updated by a write command from the peer.
rgrover1 716:11b41f651697 1253 * For a Central, this callback is triggered when a response is received for
rgrover1 716:11b41f651697 1254 * a write request.
rgrover1 716:11b41f651697 1255 *
vcoubard 1048:efb29faf12fc 1256 * @Note: It is possible to chain together multiple onDataWritten callbacks
rgrover1 716:11b41f651697 1257 * (potentially from different modules of an application) to receive updates
vcoubard 1048:efb29faf12fc 1258 * to characteristics. Many services, such as DFU and UART, add their own
rgrover1 716:11b41f651697 1259 * onDataWritten callbacks behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1260 *
vcoubard 1048:efb29faf12fc 1261 * @Note: It is also possible to set up a callback into a member function of
rgrover1 716:11b41f651697 1262 * some object.
rgrover1 716:11b41f651697 1263 *
rgrover1 716:11b41f651697 1264 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1265 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1266 * to ble.onDataWritten(...) should be replaced with
rgrover1 716:11b41f651697 1267 * ble.gattServer().onDataWritten(...).
rgrover1 716:11b41f651697 1268 */
rgrover1 716:11b41f651697 1269 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1270 gattServer().onDataWritten(callback);
rgrover1 716:11b41f651697 1271 }
rgrover1 716:11b41f651697 1272 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
rgrover1 716:11b41f651697 1273 gattServer().onDataWritten(objPtr, memberPtr);
rgrover1 716:11b41f651697 1274 }
rgrover1 716:11b41f651697 1275
rgrover1 716:11b41f651697 1276 /**
vcoubard 1048:efb29faf12fc 1277 * Set up a callback to be invoked on the peripheral when an attribute is
rgrover1 716:11b41f651697 1278 * being read by a remote client.
rgrover1 716:11b41f651697 1279 *
vcoubard 1048:efb29faf12fc 1280 * @Note: This functionality may not be available on all underlying stacks.
rgrover1 716:11b41f651697 1281 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
rgrover1 716:11b41f651697 1282 * alternative.
rgrover1 716:11b41f651697 1283 *
vcoubard 1048:efb29faf12fc 1284 * @Note: It is possible to chain together multiple onDataRead callbacks
rgrover1 716:11b41f651697 1285 * (potentially from different modules of an application) to receive updates
rgrover1 716:11b41f651697 1286 * to characteristics. Services may add their own onDataRead callbacks
rgrover1 716:11b41f651697 1287 * behind the scenes to trap interesting events.
rgrover1 716:11b41f651697 1288 *
vcoubard 1048:efb29faf12fc 1289 * @Note: It is also possible to set up a callback into a member function of
rgrover1 716:11b41f651697 1290 * some object.
rgrover1 716:11b41f651697 1291 *
rgrover1 716:11b41f651697 1292 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
rgrover1 716:11b41f651697 1293 * else BLE_ERROR_NONE.
rgrover1 716:11b41f651697 1294 *
rgrover1 716:11b41f651697 1295 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1296 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1297 * to ble.onDataRead(...) should be replaced with
rgrover1 716:11b41f651697 1298 * ble.gattServer().onDataRead(...).
rgrover1 716:11b41f651697 1299 */
rgrover1 716:11b41f651697 1300 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
rgrover1 716:11b41f651697 1301 return gattServer().onDataRead(callback);
rgrover1 716:11b41f651697 1302 }
rgrover1 716:11b41f651697 1303 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
rgrover1 716:11b41f651697 1304 return gattServer().onDataRead(objPtr, memberPtr);
rgrover1 716:11b41f651697 1305 }
rgrover1 716:11b41f651697 1306
rgrover1 716:11b41f651697 1307 /**
vcoubard 1048:efb29faf12fc 1308 * Set up a callback for when notifications or indications are enabled for a
rgrover1 716:11b41f651697 1309 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1310 *
rgrover1 716:11b41f651697 1311 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1312 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1313 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1314 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1315 */
rgrover1 716:11b41f651697 1316 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1317 gattServer().onUpdatesEnabled(callback);
rgrover1 716:11b41f651697 1318 }
rgrover1 716:11b41f651697 1319
rgrover1 716:11b41f651697 1320 /**
vcoubard 1048:efb29faf12fc 1321 * Set up a callback for when notifications or indications are disabled for a
rgrover1 716:11b41f651697 1322 * characteristic on the local GattServer.
rgrover1 716:11b41f651697 1323 *
rgrover1 716:11b41f651697 1324 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1325 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1326 * to ble.onUpdatesEnabled(callback) should be replaced with
rgrover1 716:11b41f651697 1327 * ble.gattServer().onUpdatesEnabled(callback).
rgrover1 716:11b41f651697 1328 */
rgrover1 716:11b41f651697 1329 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1330 gattServer().onUpdatesDisabled(callback);
rgrover1 716:11b41f651697 1331 }
rgrover1 716:11b41f651697 1332
rgrover1 716:11b41f651697 1333 /**
vcoubard 1048:efb29faf12fc 1334 * Set up a callback for when the GATT server receives a response for an
rgrover1 716:11b41f651697 1335 * indication event sent previously.
rgrover1 716:11b41f651697 1336 *
rgrover1 716:11b41f651697 1337 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1338 * You should use the parallel API from GattServer directly. A former call
rgrover1 716:11b41f651697 1339 * to ble.onConfirmationReceived(callback) should be replaced with
rgrover1 716:11b41f651697 1340 * ble.gattServer().onConfirmationReceived(callback).
rgrover1 716:11b41f651697 1341 */
rgrover1 716:11b41f651697 1342 void onConfirmationReceived(GattServer::EventCallback_t callback) {
rgrover1 716:11b41f651697 1343 gattServer().onConfirmationReceived(callback);
rgrover1 716:11b41f651697 1344 }
rgrover1 716:11b41f651697 1345
rgrover1 716:11b41f651697 1346 /**
vcoubard 1048:efb29faf12fc 1347 * Set up a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1348 * and exchange) for a link has started. This will be skipped for bonded
rgrover1 716:11b41f651697 1349 * devices. The callback is passed in parameters received from the peer's
rgrover1 716:11b41f651697 1350 * security request: bool allowBonding, bool requireMITM, and
rgrover1 716:11b41f651697 1351 * SecurityIOCapabilities_t.
rgrover1 716:11b41f651697 1352 *
rgrover1 716:11b41f651697 1353 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1354 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1355 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
rgrover1 716:11b41f651697 1356 * ble.securityManager().onSecuritySetupInitiated(callback).
rgrover1 716:11b41f651697 1357 */
rgrover1 716:11b41f651697 1358 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
rgrover1 716:11b41f651697 1359 securityManager().onSecuritySetupInitiated(callback);
rgrover1 716:11b41f651697 1360 }
rgrover1 716:11b41f651697 1361
rgrover1 716:11b41f651697 1362 /**
vcoubard 1048:efb29faf12fc 1363 * Set up a callback for when the security setup procedure (key generation
rgrover1 716:11b41f651697 1364 * and exchange) for a link has completed. This will be skipped for bonded
rgrover1 716:11b41f651697 1365 * devices. The callback is passed in the success/failure status of the
rgrover1 716:11b41f651697 1366 * security setup procedure.
rgrover1 716:11b41f651697 1367 *
rgrover1 716:11b41f651697 1368 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1369 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1370 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
rgrover1 716:11b41f651697 1371 * ble.securityManager().onSecuritySetupCompleted(callback).
rgrover1 716:11b41f651697 1372 */
rgrover1 716:11b41f651697 1373 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
rgrover1 716:11b41f651697 1374 securityManager().onSecuritySetupCompleted(callback);
rgrover1 716:11b41f651697 1375 }
rgrover1 716:11b41f651697 1376
rgrover1 716:11b41f651697 1377 /**
vcoubard 1048:efb29faf12fc 1378 * Set up a callback for when a link with the peer is secured. For bonded
vcoubard 1048:efb29faf12fc 1379 * devices, subsequent reconnections with a bonded peer will result only in
vcoubard 1048:efb29faf12fc 1380 * this callback when the link is secured, and setup procedures will not
rgrover1 716:11b41f651697 1381 * occur unless the bonding information is either lost or deleted on either
rgrover1 716:11b41f651697 1382 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
rgrover1 716:11b41f651697 1383 * to the level of security in effect for the secured link.
rgrover1 716:11b41f651697 1384 *
rgrover1 716:11b41f651697 1385 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1386 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1387 * call to ble.onLinkSecured(callback) should be replaced with
rgrover1 716:11b41f651697 1388 * ble.securityManager().onLinkSecured(callback).
rgrover1 716:11b41f651697 1389 */
rgrover1 716:11b41f651697 1390 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
rgrover1 716:11b41f651697 1391 securityManager().onLinkSecured(callback);
rgrover1 716:11b41f651697 1392 }
rgrover1 716:11b41f651697 1393
rgrover1 716:11b41f651697 1394 /**
vcoubard 1048:efb29faf12fc 1395 * Set up a callback for successful bonding, meaning that link-specific security
rgrover1 716:11b41f651697 1396 * context is stored persistently for a peer device.
rgrover1 716:11b41f651697 1397 *
rgrover1 716:11b41f651697 1398 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1399 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1400 * call to ble.onSecurityContextStored(callback) should be replaced with
rgrover1 716:11b41f651697 1401 * ble.securityManager().onSecurityContextStored(callback).
rgrover1 716:11b41f651697 1402 */
rgrover1 716:11b41f651697 1403 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
rgrover1 716:11b41f651697 1404 securityManager().onSecurityContextStored(callback);
rgrover1 716:11b41f651697 1405 }
rgrover1 716:11b41f651697 1406
rgrover1 716:11b41f651697 1407 /**
vcoubard 1048:efb29faf12fc 1408 * Set up a callback for when the passkey needs to be displayed on a
rgrover1 716:11b41f651697 1409 * peripheral with DISPLAY capability. This happens when security is
vcoubard 1078:79c089630b38 1410 * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
vcoubard 1048:efb29faf12fc 1411 * a passkey (or PIN) to authenticate the connection
rgrover1 716:11b41f651697 1412 * attempt.
rgrover1 716:11b41f651697 1413 *
rgrover1 716:11b41f651697 1414 * @note: This API is now *deprecated* and will be dropped in the future.
rgrover1 716:11b41f651697 1415 * You should use the parallel API from SecurityManager directly. A former
rgrover1 716:11b41f651697 1416 * call to ble.onPasskeyDisplay(callback) should be replaced with
rgrover1 716:11b41f651697 1417 * ble.securityManager().onPasskeyDisplay(callback).
rgrover1 716:11b41f651697 1418 */
rgrover1 716:11b41f651697 1419 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
rgrover1 716:11b41f651697 1420 return securityManager().onPasskeyDisplay(callback);
rgrover1 716:11b41f651697 1421 }
rgrover1 716:11b41f651697 1422
rgrover1 716:11b41f651697 1423 private:
rgrover1 886:0a45c67b2301 1424 /**
rgrover1 886:0a45c67b2301 1425 * Implementation of init() [internal to BLE_API].
rgrover1 886:0a45c67b2301 1426 *
rgrover1 886:0a45c67b2301 1427 * The implementation is separated into a private method because it isn't
rgrover1 886:0a45c67b2301 1428 * suitable to be included in the header.
rgrover1 886:0a45c67b2301 1429 */
rgrover1 886:0a45c67b2301 1430 ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
rgrover1 886:0a45c67b2301 1431
rgrover1 886:0a45c67b2301 1432 private:
rgrover1 806:50c121156a71 1433 BLE(const BLE&);
rgrover1 806:50c121156a71 1434 BLE &operator=(const BLE &);
rgrover1 806:50c121156a71 1435
rgrover1 806:50c121156a71 1436 private:
rgrover1 861:2afa79e3ed0a 1437 InstanceID_t instanceID;
vcoubard 1048:efb29faf12fc 1438 BLEInstanceBase *transport; /* The device-specific backend */
rgrover1 716:11b41f651697 1439 };
rgrover1 716:11b41f651697 1440
rgrover1 716:11b41f651697 1441 typedef BLE BLEDevice; /* DEPRECATED. This type alias is retained for the sake of compatibility with older
rgrover1 716:11b41f651697 1442 * code. Will be dropped at some point soon.*/
rgrover1 716:11b41f651697 1443
rgrover1 716:11b41f651697 1444 #endif // ifndef __BLE_H__