Diff: EncoderMspInitF1.cpp

Revision:

7:cd502aeab71a

Parent:

6:11dea4c204ba

diff -r 11dea4c204ba -r cd502aeab71a EncoderMspInitF1.cpp
--- a/EncoderMspInitF1.cpp	Fri Oct 14 13:38:48 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,74 +0,0 @@
-#include "mbed.h"
-/*
- * HAL_TIM_Encoder_MspInit()
- * Overrides the __weak function stub in stm32f1xx_hal_tim.h
- *
- * Edit the below for your preferred pin wiring & pullup/down
- * I have encoder common at 3V3, using GPIO_PULLDOWN on inputs.
- * Encoder A&B outputs connected directly to GPIOs.
- *
- * http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00161566.pdf
- * Table 5 has GPIO alternate function pinout mappings.
- *
- * TIM1_CH1: default PA_8, remap PE_9
- * TIM1_CH2: default PA_9, remap PE_11
- *
- * TIM2_CH1: default PA_0 
- * TIM2_CH2: default PA_1, remap PB_3
- *
- * TIM3_CH1: default PA_6, remap PB_4, PC_6
- * TIM3_CH2: default PA_7, remap PB_5, PC_7
- *
- * TIM4_CH1: default PB_6, remap PD_12
- * TIM4_CH2: default PB_7, remap PD_13
- *
- * NB one of these timers will be the employed by mbed as systick, unavailable as encoder.
- */
-
-#ifdef TARGET_STM32F1
-void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
-{
-    GPIO_InitTypeDef GPIO_InitStruct;
-
-    if (htim->Instance == TIM1) { //PA8 PA9 = Nucleo D7 D8
-        __TIM1_CLK_ENABLE();
-        __GPIOA_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_9;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-//        GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
-        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    }
-    else if (htim->Instance == TIM2) { //PA0 PA1 = Nucleo A0 A1
-        __TIM2_CLK_ENABLE();
-        __GPIOA_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-//        GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
-        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    }
-    else if (htim->Instance == TIM3) { //PA6 PA7 = Nucleo D12 D11
-        __TIM3_CLK_ENABLE();
-        __GPIOA_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-//        GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
-        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-    }
-    else if (htim->Instance == TIM4) { // PB6 PB7 = Nucleo D10 MORPHO PB7
-        __TIM4_CLK_ENABLE();
-        __GPIOB_CLK_ENABLE();
-        GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;
-        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-        GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-        GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
-//        GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
-        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-    }
-}
-#endif
\ No newline at end of file