Ken Todotani
Memory to Memory DMA demo from CMSIS example. This demo execute 1000 times of 32 word memory to memory DMA (copy), and also measures number of dummy loop execution during DMA cylcles. Line 56 of "DMA_M2M.c" can change DMA source. where; 1)static : source is SRAM 2)const : source is Flash ROM
Diff: CMSIS_Lib/lpc17xx_clkpwr.c
- Revision:
- 0:692bf16d1455
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CMSIS_Lib/lpc17xx_clkpwr.c Sun Nov 14 03:26:04 2010 +0000
@@ -0,0 +1,338 @@
+/***********************************************************************//**
+ * @file lpc17xx_clkpwr.c
+ * @brief Contains all functions support for Clock and Power Control
+ * firmware library on LPC17xx
+ * @version 3.0
+ * @date 18. June. 2010
+ * @author NXP MCU SW Application Team
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **********************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @addtogroup CLKPWR
+ * @{
+ */
+
+/* Includes ------------------------------------------------------------------- */
+#include "lpc17xx_clkpwr.h"
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @addtogroup CLKPWR_Public_Functions
+ * @{
+ */
+
+/*********************************************************************//**
+ * @brief Set value of each Peripheral Clock Selection
+ * @param[in] ClkType Peripheral Clock Selection of each type,
+ * should be one of the following:
+ * - CLKPWR_PCLKSEL_WDT : WDT
+ - CLKPWR_PCLKSEL_TIMER0 : Timer 0
+ - CLKPWR_PCLKSEL_TIMER1 : Timer 1
+ - CLKPWR_PCLKSEL_UART0 : UART 0
+ - CLKPWR_PCLKSEL_UART1 : UART 1
+ - CLKPWR_PCLKSEL_PWM1 : PWM 1
+ - CLKPWR_PCLKSEL_I2C0 : I2C 0
+ - CLKPWR_PCLKSEL_SPI : SPI
+ - CLKPWR_PCLKSEL_SSP1 : SSP 1
+ - CLKPWR_PCLKSEL_DAC : DAC
+ - CLKPWR_PCLKSEL_ADC : ADC
+ - CLKPWR_PCLKSEL_CAN1 : CAN 1
+ - CLKPWR_PCLKSEL_CAN2 : CAN 2
+ - CLKPWR_PCLKSEL_ACF : ACF
+ - CLKPWR_PCLKSEL_QEI : QEI
+ - CLKPWR_PCLKSEL_PCB : PCB
+ - CLKPWR_PCLKSEL_I2C1 : I2C 1
+ - CLKPWR_PCLKSEL_SSP0 : SSP 0
+ - CLKPWR_PCLKSEL_TIMER2 : Timer 2
+ - CLKPWR_PCLKSEL_TIMER3 : Timer 3
+ - CLKPWR_PCLKSEL_UART2 : UART 2
+ - CLKPWR_PCLKSEL_UART3 : UART 3
+ - CLKPWR_PCLKSEL_I2C2 : I2C 2
+ - CLKPWR_PCLKSEL_I2S : I2S
+ - CLKPWR_PCLKSEL_RIT : RIT
+ - CLKPWR_PCLKSEL_SYSCON : SYSCON
+ - CLKPWR_PCLKSEL_MC : MC
+
+ * @param[in] DivVal Value of divider, should be:
+ * - CLKPWR_PCLKSEL_CCLK_DIV_4 : PCLK_peripheral = CCLK/4
+ * - CLKPWR_PCLKSEL_CCLK_DIV_1 : PCLK_peripheral = CCLK/1
+ * - CLKPWR_PCLKSEL_CCLK_DIV_2 : PCLK_peripheral = CCLK/2
+ *
+ * @return none
+ **********************************************************************/
+void CLKPWR_SetPCLKDiv (uint32_t ClkType, uint32_t DivVal)
+{
+ uint32_t bitpos;
+
+ bitpos = (ClkType < 32) ? (ClkType) : (ClkType - 32);
+
+ /* PCLKSEL0 selected */
+ if (ClkType < 32)
+ {
+ /* Clear two bit at bit position */
+ LPC_SC->PCLKSEL0 &= (~(CLKPWR_PCLKSEL_BITMASK(bitpos)));
+
+ /* Set two selected bit */
+ LPC_SC->PCLKSEL0 |= (CLKPWR_PCLKSEL_SET(bitpos, DivVal));
+ }
+ /* PCLKSEL1 selected */
+ else
+ {
+ /* Clear two bit at bit position */
+ LPC_SC->PCLKSEL1 &= ~(CLKPWR_PCLKSEL_BITMASK(bitpos));
+
+ /* Set two selected bit */
+ LPC_SC->PCLKSEL1 |= (CLKPWR_PCLKSEL_SET(bitpos, DivVal));
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief Get current value of each Peripheral Clock Selection
+ * @param[in] ClkType Peripheral Clock Selection of each type,
+ * should be one of the following:
+ * - CLKPWR_PCLKSEL_WDT : WDT
+ - CLKPWR_PCLKSEL_TIMER0 : Timer 0
+ - CLKPWR_PCLKSEL_TIMER1 : Timer 1
+ - CLKPWR_PCLKSEL_UART0 : UART 0
+ - CLKPWR_PCLKSEL_UART1 : UART 1
+ - CLKPWR_PCLKSEL_PWM1 : PWM 1
+ - CLKPWR_PCLKSEL_I2C0 : I2C 0
+ - CLKPWR_PCLKSEL_SPI : SPI
+ - CLKPWR_PCLKSEL_SSP1 : SSP 1
+ - CLKPWR_PCLKSEL_DAC : DAC
+ - CLKPWR_PCLKSEL_ADC : ADC
+ - CLKPWR_PCLKSEL_CAN1 : CAN 1
+ - CLKPWR_PCLKSEL_CAN2 : CAN 2
+ - CLKPWR_PCLKSEL_ACF : ACF
+ - CLKPWR_PCLKSEL_QEI : QEI
+ - CLKPWR_PCLKSEL_PCB : PCB
+ - CLKPWR_PCLKSEL_I2C1 : I2C 1
+ - CLKPWR_PCLKSEL_SSP0 : SSP 0
+ - CLKPWR_PCLKSEL_TIMER2 : Timer 2
+ - CLKPWR_PCLKSEL_TIMER3 : Timer 3
+ - CLKPWR_PCLKSEL_UART2 : UART 2
+ - CLKPWR_PCLKSEL_UART3 : UART 3
+ - CLKPWR_PCLKSEL_I2C2 : I2C 2
+ - CLKPWR_PCLKSEL_I2S : I2S
+ - CLKPWR_PCLKSEL_RIT : RIT
+ - CLKPWR_PCLKSEL_SYSCON : SYSCON
+ - CLKPWR_PCLKSEL_MC : MC
+
+ * @return Value of Selected Peripheral Clock Selection
+ **********************************************************************/
+uint32_t CLKPWR_GetPCLKSEL (uint32_t ClkType)
+{
+ uint32_t bitpos, retval;
+
+ if (ClkType < 32)
+ {
+ bitpos = ClkType;
+ retval = LPC_SC->PCLKSEL0;
+ }
+ else
+ {
+ bitpos = ClkType - 32;
+ retval = LPC_SC->PCLKSEL1;
+ }
+
+ retval = CLKPWR_PCLKSEL_GET(bitpos, retval);
+ return retval;
+}
+
+
+
+/*********************************************************************//**
+ * @brief Get current value of each Peripheral Clock
+ * @param[in] ClkType Peripheral Clock Selection of each type,
+ * should be one of the following:
+ * - CLKPWR_PCLKSEL_WDT : WDT
+ - CLKPWR_PCLKSEL_TIMER0 : Timer 0
+ - CLKPWR_PCLKSEL_TIMER1 : Timer 1
+ - CLKPWR_PCLKSEL_UART0 : UART 0
+ - CLKPWR_PCLKSEL_UART1 : UART 1
+ - CLKPWR_PCLKSEL_PWM1 : PWM 1
+ - CLKPWR_PCLKSEL_I2C0 : I2C 0
+ - CLKPWR_PCLKSEL_SPI : SPI
+ - CLKPWR_PCLKSEL_SSP1 : SSP 1
+ - CLKPWR_PCLKSEL_DAC : DAC
+ - CLKPWR_PCLKSEL_ADC : ADC
+ - CLKPWR_PCLKSEL_CAN1 : CAN 1
+ - CLKPWR_PCLKSEL_CAN2 : CAN 2
+ - CLKPWR_PCLKSEL_ACF : ACF
+ - CLKPWR_PCLKSEL_QEI : QEI
+ - CLKPWR_PCLKSEL_PCB : PCB
+ - CLKPWR_PCLKSEL_I2C1 : I2C 1
+ - CLKPWR_PCLKSEL_SSP0 : SSP 0
+ - CLKPWR_PCLKSEL_TIMER2 : Timer 2
+ - CLKPWR_PCLKSEL_TIMER3 : Timer 3
+ - CLKPWR_PCLKSEL_UART2 : UART 2
+ - CLKPWR_PCLKSEL_UART3 : UART 3
+ - CLKPWR_PCLKSEL_I2C2 : I2C 2
+ - CLKPWR_PCLKSEL_I2S : I2S
+ - CLKPWR_PCLKSEL_RIT : RIT
+ - CLKPWR_PCLKSEL_SYSCON : SYSCON
+ - CLKPWR_PCLKSEL_MC : MC
+
+ * @return Value of Selected Peripheral Clock
+ **********************************************************************/
+uint32_t CLKPWR_GetPCLK (uint32_t ClkType)
+{
+ uint32_t retval, div;
+
+ retval = SystemCoreClock;
+ div = CLKPWR_GetPCLKSEL(ClkType);
+
+ switch (div)
+ {
+ case 0:
+ div = 4;
+ break;
+
+ case 1:
+ div = 1;
+ break;
+
+ case 2:
+ div = 2;
+ break;
+
+ case 3:
+ div = 8;
+ break;
+ }
+ retval /= div;
+
+ return retval;
+}
+
+
+
+/*********************************************************************//**
+ * @brief Configure power supply for each peripheral according to NewState
+ * @param[in] PPType Type of peripheral used to enable power,
+ * should be one of the following:
+ * - CLKPWR_PCONP_PCTIM0 : Timer 0
+ - CLKPWR_PCONP_PCTIM1 : Timer 1
+ - CLKPWR_PCONP_PCUART0 : UART 0
+ - CLKPWR_PCONP_PCUART1 : UART 1
+ - CLKPWR_PCONP_PCPWM1 : PWM 1
+ - CLKPWR_PCONP_PCI2C0 : I2C 0
+ - CLKPWR_PCONP_PCSPI : SPI
+ - CLKPWR_PCONP_PCRTC : RTC
+ - CLKPWR_PCONP_PCSSP1 : SSP 1
+ - CLKPWR_PCONP_PCAD : ADC
+ - CLKPWR_PCONP_PCAN1 : CAN 1
+ - CLKPWR_PCONP_PCAN2 : CAN 2
+ - CLKPWR_PCONP_PCGPIO : GPIO
+ - CLKPWR_PCONP_PCRIT : RIT
+ - CLKPWR_PCONP_PCMC : MC
+ - CLKPWR_PCONP_PCQEI : QEI
+ - CLKPWR_PCONP_PCI2C1 : I2C 1
+ - CLKPWR_PCONP_PCSSP0 : SSP 0
+ - CLKPWR_PCONP_PCTIM2 : Timer 2
+ - CLKPWR_PCONP_PCTIM3 : Timer 3
+ - CLKPWR_PCONP_PCUART2 : UART 2
+ - CLKPWR_PCONP_PCUART3 : UART 3
+ - CLKPWR_PCONP_PCI2C2 : I2C 2
+ - CLKPWR_PCONP_PCI2S : I2S
+ - CLKPWR_PCONP_PCGPDMA : GPDMA
+ - CLKPWR_PCONP_PCENET : Ethernet
+ - CLKPWR_PCONP_PCUSB : USB
+ *
+ * @param[in] NewState New state of Peripheral Power, should be:
+ * - ENABLE : Enable power for this peripheral
+ * - DISABLE : Disable power for this peripheral
+ *
+ * @return none
+ **********************************************************************/
+void CLKPWR_ConfigPPWR (uint32_t PPType, FunctionalState NewState)
+{
+ if (NewState == ENABLE)
+ {
+ LPC_SC->PCONP |= PPType & CLKPWR_PCONP_BITMASK;
+ }
+ else if (NewState == DISABLE)
+ {
+ LPC_SC->PCONP &= (~PPType) & CLKPWR_PCONP_BITMASK;
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Sleep mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+void CLKPWR_Sleep(void)
+{
+ LPC_SC->PCON = 0x00;
+ /* Sleep Mode*/
+ __WFI();
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Deep Sleep mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+void CLKPWR_DeepSleep(void)
+{
+ /* Deep-Sleep Mode, set SLEEPDEEP bit */
+ SCB->SCR = 0x4;
+ LPC_SC->PCON = 0x8;
+ /* Deep Sleep Mode*/
+ __WFI();
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Power Down mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+void CLKPWR_PowerDown(void)
+{
+ /* Deep-Sleep Mode, set SLEEPDEEP bit */
+ SCB->SCR = 0x4;
+ LPC_SC->PCON = 0x09;
+ /* Power Down Mode*/
+ __WFI();
+}
+
+
+/*********************************************************************//**
+ * @brief Enter Deep Power Down mode with co-operated instruction by the Cortex-M3.
+ * @param[in] None
+ * @return None
+ **********************************************************************/
+void CLKPWR_DeepPowerDown(void)
+{
+ /* Deep-Sleep Mode, set SLEEPDEEP bit */
+ SCB->SCR = 0x4;
+ LPC_SC->PCON = 0x03;
+ /* Deep Power Down Mode*/
+ __WFI();
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */