sx1272-hal.h

00001 /*
00002  / _____)             _              | |
00003 ( (____  _____ ____ _| |_ _____  ____| |__
00004  \____ \| ___ |    (_   _) ___ |/ ___)  _ \
00005  _____) ) ____| | | || |_| ____( (___| | | |
00006 (______/|_____)_|_|_| \__)_____)\____)_| |_|
00007     (C) 2014 Semtech
00008 
00009 Description: -
00010 
00011 License: Revised BSD License, see LICENSE.TXT file include in the project
00012 
00013 Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
00014 */
00015 #ifndef __SX1272_HAL_H__
00016 #define __SX1272_HAL_H__
00017 #include "sx1272.h"
00018 
00019 /*!
00020  * \brief Radio hardware registers initialization definition
00021  *
00022  * \remark Can be automatically generated by the SX1272 GUI (not yet implemented)
00023  */
00024 #define RADIO_INIT_REGISTERS_VALUE                \
00025 {                                                 \
00026     { MODEM_FSK , REG_LNA                , 0x23 },\
00027     { MODEM_FSK , REG_RXCONFIG           , 0x1E },\
00028     { MODEM_FSK , REG_RSSICONFIG         , 0xD2 },\
00029     { MODEM_FSK , REG_PREAMBLEDETECT     , 0xAA },\
00030     { MODEM_FSK , REG_OSC                , 0x07 },\
00031     { MODEM_FSK , REG_SYNCCONFIG         , 0x12 },\
00032     { MODEM_FSK , REG_SYNCVALUE1         , 0xC1 },\
00033     { MODEM_FSK , REG_SYNCVALUE2         , 0x94 },\
00034     { MODEM_FSK , REG_SYNCVALUE3         , 0xC1 },\
00035     { MODEM_FSK , REG_PACKETCONFIG1      , 0xD8 },\
00036     { MODEM_FSK , REG_FIFOTHRESH         , 0x8F },\
00037     { MODEM_FSK , REG_IMAGECAL           , 0x02 },\
00038     { MODEM_FSK , REG_DIOMAPPING1        , 0x00 },\
00039     { MODEM_FSK , REG_DIOMAPPING2        , 0x30 },\
00040     { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },\
00041 }                                                 \
00042 
00043 /*! 
00044  * Actual implementation of a SX1272 radio, includes some modifications to make it compatible with the MB1 LAS board
00045  */
00046 class SX1272MB1xAS  : public SX1272 
00047 {
00048 protected:
00049     /*!
00050      * Antenna switch GPIO pins objects
00051      */
00052     DigitalInOut antSwitch ;
00053     
00054     DigitalIn fake;
00055     
00056 private:
00057     static const RadioRegisters_t  RadioRegsInit[];
00058     
00059 public:
00060     SX1272MB1xAS ( RadioEvents_t *events,
00061             PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset ,
00062             PinName dio0 , PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
00063             PinName antSwitch  ); 
00064     
00065     SX1272MB1xAS ( RadioEvents_t *events );
00066     
00067     virtual ~SX1272MB1xAS ( ) { };
00068     
00069     protected:
00070     /*!
00071      * @brief Initializes the radio I/Os pins interface
00072      */
00073     virtual void IoInit( void );
00074     
00075     /*!
00076      *  @brief Initializes the radio registers
00077      */
00078     virtual void RadioRegistersInit( );
00079     
00080     /*!
00081      * @brief Initializes the radio SPI
00082      */
00083     virtual void SpiInit( void );
00084     
00085     /*!
00086      * @brief Initializes DIO IRQ handlers
00087      *
00088      * @param [IN] irqHandlers Array containing the IRQ callback functions
00089      */
00090     virtual void IoIrqInit( DioIrqHandler *irqHandlers );
00091 
00092     /*!
00093      * @brief De-initializes the radio I/Os pins interface. 
00094      *
00095      * \remark Useful when going in MCU lowpower modes
00096      */
00097     virtual void IoDeInit( void );
00098 
00099     /*!
00100      * @brief Gets the board PA selection configuration
00101      *
00102      * @param [IN] channel Channel frequency in Hz
00103      * @retval PaSelect RegPaConfig PaSelect value
00104      */
00105     virtual uint8_t GetPaSelect( uint32_t channel );
00106 
00107     /*!
00108      * @brief Set the RF Switch I/Os pins in Low Power mode
00109      *
00110      * @param [IN] status enable or disable
00111      */
00112     virtual void SetAntSwLowPower( bool status );
00113 
00114     /*!
00115      * @brief Initializes the RF Switch I/Os pins interface
00116      */
00117     virtual void AntSwInit( void );
00118 
00119     /*!
00120      * @brief De-initializes the RF Switch I/Os pins interface 
00121      *
00122      * \remark Needed to decrease the power consumption in MCU lowpower modes
00123      */
00124     virtual void AntSwDeInit( void );
00125 
00126     /*!
00127      * @brief Controls the antena switch if necessary.
00128      *
00129      * \remark see errata note
00130      *
00131      * @param [IN] rxTx [1: Tx, 0: Rx]
00132      */
00133     virtual void SetAntSw( uint8_t rxTx  );
00134     
00135     public:
00136     /*!
00137      * @brief Detect the board connected by reading the value of the antenna switch pin
00138      */
00139     virtual uint8_t DetectBoardType( void );    
00140     
00141     /*!
00142      * @brief Checks if the given RF frequency is supported by the hardware
00143      *
00144      * @param [IN] frequency RF frequency to be checked
00145      * @retval isSupported [true: supported, false: unsupported]
00146      */
00147     virtual bool CheckRfFrequency( uint32_t frequency );
00148     
00149         /*!
00150      * @brief Writes the radio register at the specified address
00151      *
00152      * @param [IN]: addr Register address
00153      * @param [IN]: data New register value
00154      */
00155     virtual void Write ( uint8_t addr, uint8_t data ) ;
00156     
00157     /*!
00158      * @brief Reads the radio register at the specified address
00159      *
00160      * @param [IN]: addr Register address
00161      * @retval data Register value
00162      */
00163     virtual uint8_t Read ( uint8_t addr ) ;
00164     
00165     /*!
00166      * @brief Writes multiple radio registers starting at address
00167      *
00168      * @param [IN] addr   First Radio register address
00169      * @param [IN] buffer Buffer containing the new register's values
00170      * @param [IN] size   Number of registers to be written
00171      */
00172     virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
00173     
00174     /*!
00175      * @brief Reads multiple radio registers starting at address
00176      *
00177      * @param [IN] addr First Radio register address
00178      * @param [OUT] buffer Buffer where to copy the registers data
00179      * @param [IN] size Number of registers to be read
00180      */
00181     virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
00182     
00183     /*!
00184      * @brief Writes the buffer contents to the SX1272 FIFO
00185      *
00186      * @param [IN] buffer Buffer containing data to be put on the FIFO.
00187      * @param [IN] size Number of bytes to be written to the FIFO
00188      */
00189     virtual void WriteFifo( uint8_t *buffer, uint8_t size ) ;
00190 
00191     /*!
00192      * @brief Reads the contents of the SX1272 FIFO
00193      *
00194      * @param [OUT] buffer Buffer where to copy the FIFO read data.
00195      * @param [IN] size Number of bytes to be read from the FIFO
00196      */
00197     virtual void ReadFifo( uint8_t *buffer, uint8_t size ) ;
00198     
00199     /*!
00200      * @brief Reset the SX1272
00201      */
00202     virtual void Reset( void );
00203 };
00204 
00205 #endif // __SX1272_HAL_H__