Diff: FRDM-s401.h

Revision:

0:d04758e76d5b

Child:

1:1579bcd31410

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/FRDM-s401.h	Tue Jan 14 07:00:15 2014 +0000
@@ -0,0 +1,129 @@
+#ifndef __FRDM_S401_H_
+#define __FRDM_S401_H_
+/*^^^^^^^^^^^^^^^^      LCD HARDWARE CONECTION ^^^^^^^^^^^^^^^^^^^^^^^^*/
+#define  _LCDFRONTPLANES   (8)                             // # of frontPlanes
+#define  _LCDBACKPLANES    (4)                              // # of backplanes
+
+/*
+   LCD logical organization definition
+    This section indicate how the LCD is distributed  how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain
+   First character is forced only one can be written
+
+*/
+// HARDWARE_CONFIG Changing LCD pins Allows to verify all LCD pins easily
+// if HARDWARE_CONFIG  == 0 FRDM-KL46 RevB 
+// if HARDWARE_CONFIG  == 1 FRDM-KL46 RevA
+#ifdef FRDM_REVA
+#define HARDWARE_CONFIG 1
+#else
+#define HARDWARE_CONFIG 0
+#endif
+
+#define _CHARNUM     (4)  //number of chars that can be written
+#define _CHAR_SIZE   (2)  // Used only when Dot Matrix is used
+#define _LCDTYPE     (2)  //indicate how many LCD_WF are required to write a single Character / or Column in case of DOT matrix LCD
+
+/*
+  Following definitions indicate how characters are associated to waveform
+*/
+/* Hardware configuration  */
+#if HARDWARE_CONFIG == 0
+#undef DOT_MATRIX
+
+// LCD PIN1 to LCDWF0  Rev B
+#define   CHAR1a    37 // LCD Pin 5
+#define   CHAR1b    17 // LCD Pin 6
+#define   CHAR2a    7 // LCD Pin 7
+#define   CHAR2b    8 // LCD Pin 8
+#define   CHAR3a    53 // LCD Pin 9
+#define   CHAR3b    38 // LCD Pin 10
+#define   CHAR4a    10 // LCD Pin 11
+#define   CHAR4b    11 // LCD Pin 12
+#define   CHARCOM0    40 // LCD Pin 1
+#define   CHARCOM1    52 // LCD Pin 2
+#define   CHARCOM2    19 // LCD Pin 3
+#define   CHARCOM3    18 // LCD Pin 4
+
+/*Special Symbols */
+#define SPECIAL_SYMBOL_COUNT   4
+
+#define   _LCD_DP1_ON()      SymbolON(17,0)
+#define   _LCD_DP2_ON()      SymbolON(8,0)
+#define   _LCD_DP3_ON()      SymbolON(38,0)
+#define   _LCD_COL_ON()      SymbolON(11,0)
+
+#define   _LCD_DP1_OFF()      SymbolOFF(17,0)
+#define   _LCD_DP2_OFF()      SymbolOFF(8,0)
+#define   _LCD_DP3_OFF()      SymbolOFF(38,0)
+#define   _LCD_COL_OFF()      SymbolOFF(11,0)
+
+// LCD PIN1 to LCDWF2   for FRDM-KL46Z
+#elif HARDWARE_CONFIG == 1
+#define   CHAR1a    37 // LCD Pin 5
+#define   CHAR1b    17 // LCD Pin 6
+#define   CHAR2a    7 // LCD Pin 7
+#define   CHAR2b    8 // LCD Pin 8
+#define   CHAR3a    12 // LCD Pin 9
+#define   CHAR3b    26 // LCD Pin 10
+#define   CHAR4a    10 // LCD Pin 11
+#define   CHAR4b    11 // LCD Pin 12
+#define   CHARCOM0    51 // LCD Pin 1
+#define   CHARCOM1    52 // LCD Pin 2
+#define   CHARCOM2    19 // LCD Pin 3
+#define   CHARCOM3    16 // LCD Pin 4
+
+#define SPECIAL_SYMBOL_COUNT   4
+
+
+#define   _LCD_DP1_ON()      SymbolON(17,0)
+#define   _LCD_DP2_ON()      SymbolON(8,0)
+#define   _LCD_DP3_ON()      SymbolON(26,0)
+#define   _LCD_COL_ON()      SymbolON(11,0)
+
+#define   _LCD_DP1_OFF()      SymbolOFF(17,0)
+#define   _LCD_DP2_OFF()      SymbolOFF(8,0)
+#define   _LCD_DP3_OFF()      SymbolOFF(26,0)
+#define   _LCD_COL_OFF()      SymbolOFF(11,0)
+
+
+
+#endif
+
+
+/*Ascii Codification table information */
+#define ASCCI_TABLE_START '0'   // indicates which is the first Ascii character in the table
+#define ASCCI_TABLE_END   'Z'   // indicates which is the first Ascii character in the table
+#define BLANK_CHARACTER   '>'  // Indicate which ASCII character is a blank character (depends on ASCII table)
+
+#define _ALLON 0xFF     // Used for ALL_on function 
+
+#define SEGDP 0x01
+#define SEGC  0x02
+#define SEGB  0x04
+#define SEGA  0x08
+
+#define SEGD  0x01
+#define SEGE  0x02
+#define SEGG  0x04
+#define SEGF  0x08
+
+
+/* Fault detect initial limits */
+
+/* Fault detect initial parameters and limits */
+#define FAULTD_FP_FDPRS  FDPRS_32
+#define FAULTD_FP_FDSWW  FDSWW_128
+#define FAULTD_BP_FDPRS  FDPRS_64
+#define FAULTD_BP_FDSWW  FDSWW_128
+
+#define FAULTD_FP_HI  127
+#define FAULTD_FP_LO  110
+#define FAULTD_BP_HI  127
+#define FAULTD_BP_LO  110
+#define FAULTD_TIME   6
+
+extern const uint8_t  WF_ORDERING_TABLE[];              //   Logical Front plane N to LCD_WFx
+extern const char  ASCII_TO_WF_CODIFICATION_TABLE[]; //   ASCII to 7x5 Dot Matrix
+
+#endif /* __FRDM_S401_H_ */
+