Diff: mbed-client/mbed-client-c/nsdl-c/sn_coap_protocol.h

Revision:

0:f7c60d3e7b8a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-client/mbed-client-c/nsdl-c/sn_coap_protocol.h	Wed May 18 19:06:32 2016 +0000
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2011-2015 ARM Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/**
+ * \file sn_coap_protocol.h
+ *
+ * \brief CoAP C-library User protocol interface header file
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef SN_COAP_PROTOCOL_H_
+#define SN_COAP_PROTOCOL_H_
+
+#include "sn_coap_header.h"
+
+/**
+ * \fn struct coap_s *sn_coap_protocol_init(void* (*used_malloc_func_ptr)(uint16_t), void (*used_free_func_ptr)(void*),
+        uint8_t (*used_tx_callback_ptr)(sn_nsdl_capab_e , uint8_t *, uint16_t, sn_nsdl_addr_s *),
+        int8_t (*used_rx_callback_ptr)(sn_coap_hdr_s *, sn_nsdl_addr_s *)
+ *
+ * \brief Initializes CoAP Protocol part. When using libNsdl, sn_nsdl_init() calls this function.
+ *
+ * \param *used_malloc_func_ptr is function pointer for used memory allocation function.
+ *
+ * \param *used_free_func_ptr is function pointer for used memory free function.
+ *
+ * \param *used_tx_callback_ptr function callback pointer to tx function for sending coap messages
+ *
+ * \param *used_rx_callback_ptr used to return CoAP header struct with status COAP_STATUS_BUILDER_MESSAGE_SENDING_FAILED
+ *        when re-sendings exceeded. If set to NULL, no error message is returned.
+ *
+ * \return  Pointer to handle when success
+ *          Null if failed
+ */
+
+extern struct coap_s *sn_coap_protocol_init(void *(*used_malloc_func_ptr)(uint16_t), void (*used_free_func_ptr)(void *),
+        uint8_t (*used_tx_callback_ptr)(uint8_t *, uint16_t, sn_nsdl_addr_s *, void *),
+        int8_t (*used_rx_callback_ptr)(sn_coap_hdr_s *, sn_nsdl_addr_s *, void *));
+
+/**
+ * \fn int8_t sn_coap_protocol_destroy(void)
+ *
+ * \brief Frees all memory from CoAP protocol part
+ *
+ * \param *handle Pointer to CoAP library handle
+ *
+ * \return Return value is always 0
+ */
+extern int8_t sn_coap_protocol_destroy(struct coap_s *handle);
+
+/**
+ * \fn int16_t sn_coap_protocol_build(struct coap_s *handle, sn_nsdl_addr_s *dst_addr_ptr, uint8_t *dst_packet_data_ptr, sn_coap_hdr_s *src_coap_msg_ptr)
+ *
+ * \brief Builds Packet data from given CoAP header structure to be sent
+ *
+ * \param *dst_addr_ptr is pointer to destination address where CoAP message
+ *        will be sent (CoAP builder needs that information for message resending purposes)
+ *
+ * \param *dst_packet_data_ptr is pointer to destination of built Packet data
+ *
+ * \param *src_coap_msg_ptr is pointer to source of built Packet data
+ *
+ * \param param void pointer that will be passed to tx/rx function callback when those are called.
+ *
+ * \return Return value is byte count of built Packet data.\n
+ *         Note: If message is blockwised, all payload is not sent at the same time\n
+ *         In failure cases:\n
+ *          -1 = Failure in CoAP header structure\n
+ *          -2 = Failure in given pointer (= NULL)\n
+ *          -3 = Failure in Reset message\ŋ
+ *         If there is not enough memory (or User given limit exceeded) for storing
+ *         resending messages, situation is ignored.
+ */
+extern int16_t sn_coap_protocol_build(struct coap_s *handle, sn_nsdl_addr_s *dst_addr_ptr, uint8_t *dst_packet_data_ptr, sn_coap_hdr_s *src_coap_msg_ptr, void *param);
+
+/**
+ * \fn sn_coap_hdr_s *sn_coap_protocol_parse(struct coap_s *handle, sn_nsdl_addr_s *src_addr_ptr, uint16_t packet_data_len, uint8_t *packet_data_ptr)
+ *
+ * \brief Parses received CoAP message from given Packet data
+ *
+ * \param *src_addr_ptr is pointer to source address of received CoAP message
+ *        (CoAP parser needs that information for Message acknowledgement)
+ *
+ * \param *handle Pointer to CoAP library handle
+ *
+ * \param packet_data_len is length of given Packet data to be parsed to CoAP message
+ *
+ * \param *packet_data_ptr is pointer to source of Packet data to be parsed to CoAP message
+ *
+ * \param param void pointer that will be passed to tx/rx function callback when those are called.
+ *
+ * \return Return value is pointer to parsed CoAP message structure. This structure includes also coap_status field.\n
+ *         In following failure cases NULL is returned:\n
+ *          -Given NULL pointer\n
+ *          -Failure in parsed header of non-confirmable message\ŋ
+ *          -Out of memory (malloc() returns NULL)
+ */
+extern sn_coap_hdr_s *sn_coap_protocol_parse(struct coap_s *handle, sn_nsdl_addr_s *src_addr_ptr, uint16_t packet_data_len, uint8_t *packet_data_ptr, void *);
+
+/**
+ * \fn int8_t sn_coap_protocol_exec(struct coap_s *handle, uint32_t current_time)
+ *
+ * \brief Sends CoAP messages from re-sending queue, if there is any.
+ *        Cleans also old messages from the duplication list and from block receiving list
+ *
+ *        This function can be called e.g. once in a second but also more frequently.
+ *
+ * \param *handle Pointer to CoAP library handle
+ *
+ * \param current_time is System time in seconds. This time is
+ *        used for message re-sending timing and to identify old saved data.
+ *
+ * \return  0 if success
+ *          -1 if failed
+ */
+
+extern int8_t sn_coap_protocol_exec(struct coap_s *handle, uint32_t current_time);
+
+/**
+ * \fn int8_t sn_coap_protocol_set_block_size(uint16_t block_size)
+ *
+ * \brief If block transfer is enabled, this function changes the block size.
+ *
+ * \param uint16_t block_size maximum size of CoAP payload. Valid sizes are 16, 32, 64, 128, 256, 512 and 1024 bytes
+ * \return  0 = success
+ *          -1 = failure
+ */
+extern int8_t              sn_coap_protocol_set_block_size(uint16_t block_size);
+
+/**
+ * \fn int8_t sn_coap_protocol_set_duplicate_buffer_size(uint8_t message_count)
+ *
+ * \brief If dublicate message detection is enabled, this function changes buffer size.
+ *
+ * \param uint8_t message_count max number of messages saved for duplicate control
+ * \return  0 = success
+ *          -1 = failure
+ */
+extern int8_t              sn_coap_protocol_set_duplicate_buffer_size(uint8_t message_count);
+
+/**
+ * \fn int8_t sn_coap_protocol_set_retransmission_parameters(uint8_t resending_count, uint8_t resending_intervall)
+ *
+ * \brief  If re-transmissions are enabled, this function changes resending count and interval.
+ *
+ * \param uint8_t resending_count max number of resendings for message
+ * \param uint8_t resending_intervall message resending intervall in seconds
+ * \return  0 = success
+ *          -1 = failure
+ */
+extern int8_t              sn_coap_protocol_set_retransmission_parameters(uint8_t resending_count, uint8_t resending_interval);
+
+/**
+ * \fn int8_t sn_coap_protocol_set_retransmission_buffer(uint8_t buffer_size_messages, uint16_t buffer_size_bytes)
+ *
+ * \brief If re-transmissions are enabled, this function changes message retransmission queue size.
+ *  Set size to '0' to disable feature. If both are set to '0', then re-sendings are disabled.
+ *
+ * \param uint8_t buffer_size_messages queue size - maximum number of messages to be saved to queue
+ * \param uint8_t buffer_size_bytes queue size - maximum size of messages saved to queue
+ * \return  0 = success
+ *          -1 = failure
+ */
+extern int8_t              sn_coap_protocol_set_retransmission_buffer(uint8_t buffer_size_messages, uint16_t buffer_size_bytes);
+
+/**
+ * \fn void sn_coap_protocol_clear_retransmission_buffer(struct coap_s *handle)
+ *
+ * \param *handle Pointer to CoAP library handle
+ *
+ * \brief If re-transmissions are enabled, this function removes all messages from the retransmission queue.
+ */
+extern void                sn_coap_protocol_clear_retransmission_buffer(struct coap_s *handle);
+
+#endif /* SN_COAP_PROTOCOL_H_ */
+
+#ifdef __cplusplus
+}
+#endif
+